SN74F10NSR

SN54F10, SN74F10 TRIPLE 3-INPUT POSITIVE-NAND GATES SDFS039A – MARCH 1987 – REVISED OCTOBER 1993 • SN54F10 . . . J PACKAGE SN74F10 . . . D OR N PACKAGE (TOP VIEW) Package Options Include Plastic Small-Outline Packages, Ceramic Chip Carriers, and Standard Plastic and Ceramic 300-mil DIPs 1A 1B 2A 2B 2C 2Y GND description These devices contain three independent 3-input NAND gates. They perform the Boolean functions Y = A • B • C or Y = A + B + C in positive logic. The SN54F10 is characterized for operation over the full military temperature range of – 55°C to 125°C. The SN74F10 is characterized for operation from 0°C to 70°C. 1B 1C 2A 2B 2C 3A 3B 3C 1 13 3 12 4 11 5 10 6 9 7 8 VCC 1C 1Y 3C 3B 3A 3Y 1B 1A NC VCC 1C OUTPUT Y B C H H H L L X X H X L X H X X L H 4 3 2 1 20 19 18 5 17 6 16 7 15 8 14 9 10 11 12 13 1Y NC 3C NC 3B 2Y GND NC 3Y 3A A 2A NC 2B NC 2C logic symbol† 1A 14 2 SN54F10 . . . FK PACKAGE (TOP VIEW) FUNCTION TABLE (each gate) INPUTS 1 NC – No internal connection & 2 12 13 1Y 3 4 logic diagram, each gate (positive logic) A 6 5 B 2Y Y C 9 10 11 8 3Y † This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12. Pin numbers shown are for the D, J, and N packages. Copyright  1993, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 2–1 SN54F10, SN74F10 TRIPLE 3-INPUT POSITIVE-NAND GATES SDFS039A – MARCH 1987 – REVISED OCTOBER 1993 absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† Supply voltage range, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.5 V to 7 V Input voltage range, VI (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 1.2 V to 7 V Input current range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 30 mA to 5 mA Voltage range applied to any output in the high state . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.5 V to VCC Current into any output in the low state . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 mA Operating free-air temperature range: SN54F10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 55°C to 125°C SN74F10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C Storage temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 65°C to 150°C † Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTE 1: The input voltage ratings may be exceeded provided the input current ratings are observed. recommended operating conditions SN54F10 VCC VIH Supply voltage VIL IIK Low-level input voltage IOH IOL High-level output current Low-level output current TA Operating free-air temperature High-level input voltage SN74F10 MIN NOM MAX MIN NOM MAX 4.5 5 5.5 4.5 5 5.5 2 2 Input clamp current – 55 UNIT V V 0.8 0.8 V – 18 – 18 mA –1 –1 mA 20 20 mA 70 °C 125 0 electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER VIK VOH VOL II TEST CONDITIONS VCC = 4.5 V, VCC = 4.5 V, II = – 18 mA IOH = – 1 mA VCC = 4.75 V, VCC = 4.5 V, IOH = – 1 mA IOL = 20 mA VCC = 5.5 V, VCC = 5.5 V, VI = 7 V VI = 2.7 V VCC = 5.5 V, VCC = 5.5 V, VI = 0.5 V VO = 0 VCC = 5.5 V, VCC = 5.5 V, VI = 0 VI = 4.5 V MIN SN54F10 TYP‡ MAX MIN SN74F10 TYP‡ MAX – 1.2 2.5 3.4 – 1.2 2.5 3.4 0.5 V 0.1 0.1 mA 20 20 µA – 0.6 mA –150 mA 1.4 2.1 mA ICCL 5.1 7.7 5.1 ‡ All typical values are at VCC = 5 V, TA = 25°C. § Not more than one output should be shorted at a time, and the duration of the short circuit should not exceed one second. 7.7 mA IIH IIL IOS§ ICCH 2–2 POST OFFICE BOX 655303 0.5 0.3 V V 2.7 0.3 UNIT – 0.6 – 60 –150 1.4 • DALLAS, TEXAS 75265 2.1 – 60 SN54F10, SN74F10 TRIPLE 3-INPUT POSITIVE-NAND GATES SDFS039A – MARCH 1987 – REVISED OCTOBER 1993 switching characteristics (see Note 2) PARAMETER FROM (INPUT) TO (OUTPUT) VCC = 5 V, CL = 50 pF, RL = 500 Ω, TA = 25°C VCC = 4.5 V to 5.5 V, CL = 50 pF, RL = 500 Ω, TA = MIN to MAX† ′F10 tPLH tPHL A B, A, B or C Y SN54F10 UNIT SN74F10 MIN TYP MAX MIN MAX MIN 1.6 3.3 5 1.2 7 1.6 MAX 6 1 2.8 4.3 1 6.5 1 5.3 ns † For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions. NOTE 2: Load circuits and waveforms are shown in Section 1. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 2–3 PACKAGE OPTION ADDENDUM www.ti.com 6-Aug-2022 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan (2) Lead finish/ Ball material MSL Peak Temp Op Temp (°C) Device Marking (3) Samples (4/5) (6) 5962-9757901Q2A ACTIVE LCCC FK 20 1 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 59629757901Q2A SNJ54F 10FK 5962-9757901QCA ACTIVE CDIP J 14 1 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 5962-9757901QC A SNJ54F10J JM38510/33003B2A ACTIVE LCCC FK 20 1 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 JM38510/ 33003B2A Samples JM38510/33003BCA ACTIVE CDIP J 14 1 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 JM38510/ 33003BCA Samples JM38510/33003BDA ACTIVE CFP W 14 1 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 JM38510/ 33003BDA Samples M38510/33003B2A ACTIVE LCCC FK 20 1 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 JM38510/ 33003B2A Samples M38510/33003BCA ACTIVE CDIP J 14 1 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 JM38510/ 33003BCA Samples M38510/33003BDA ACTIVE CFP W 14 1 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 JM38510/ 33003BDA Samples SN54F10J ACTIVE CDIP J 14 1 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 SN54F10J Samples SN74F10D ACTIVE SOIC D 14 50 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 F10 Samples SN74F10DR ACTIVE SOIC D 14 2500 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 F10 Samples SN74F10N ACTIVE PDIP N 14 25 RoHS & Green NIPDAU N / A for Pkg Type 0 to 70 SN74F10N Samples SN74F10NSR ACTIVE SO NS 14 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 74F10 Samples SNJ54F10FK ACTIVE LCCC FK 20 1 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 59629757901Q2A SNJ54F 10FK SNJ54F10J ACTIVE CDIP J 14 1 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 5962-9757901QC A SNJ54F10J Addendum-Page 1 Samples Samples Samples Samples PACKAGE OPTION ADDENDUM www.ti.com 6-Aug-2022 (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of