SN54F240, SN74F240
OCTAL BUFFERS/DRIVERS
WITH 3-STATE OUTPUTS
SDFS061A – D2932, MARCH 1987 – REVISED OCTOBER 1993
•
SN54F240 . . . J PACKAGE
SN74F240 . . . DB, DW, OR N PACKAGE
(TOP VIEW)
3-State Outputs Drive Bus Lines or Buffer
Memory Address Registers
Package Options Include Plastic
Small-Outline (SOIC) and Shrink
Small-Outline (SSOP) Packages, Ceramic
Chip Carriers, and Plastic and Ceramic
DIPs
1OE
1A1
2Y4
1A2
2Y3
1A3
2Y2
1A4
2Y1
GND
description
These octal buffers and line drivers are designed
specifically to improve both the performance and
density of 3-state memory address drivers, clock
drivers, and bus-oriented receivers and
transmitters. Taken together with the ′F241 and
′F244, these devices provide the choice of
selected combinations of inverting and
noninverting outputs, symmetrical OE (active-low
output-enable) inputs, and complementary OE
and OE inputs.
1
20
2
19
3
18
4
17
5
16
6
15
7
14
8
13
9
12
10
11
VCC
2OE
1Y1
2A4
1Y2
2A3
1Y3
2A2
1Y4
2A1
2Y4
1A1
1OE
VCC
SN54F240 . . . FK PACKAGE
(TOP VIEW)
The ′F240 is organized as two 4-bit buffers/line
drivers with separate output enable (OE) inputs.
When OE is low, the device passes data from the
A inputs to the Y outputs. When OE is high, the
outputs are in the high-impedance state.
1A2
2Y3
1A3
2Y2
1A4
4
3 2 1 20 19
18
5
17
6
16
7
15
8
14
9 10 11 12 13
1Y1
2A4
1Y2
2A3
1Y3
2Y1
GND
2A1
1Y4
2A2
The SN74F240 is available in TI’s shrink
small-outline package (DB), which provides the
same I/O pin count and functionality of standard
small-outline packages in less than half the
printed-circuit-board area.
2OE
•
The SN54F240 is characterized for operation over
the full military temperature range of – 55°C to
125°C. The SN74F240 is characterized for
operation from 0°C to 70°C.
FUNCTION TABLE
(each buffer)
INPUTS
OUTPUT
Y
OE
A
L
H
L
L
L
H
H
X
Z
Copyright 1993, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
2–1
SN54F240, SN74F240
OCTAL BUFFERS/DRIVERS
WITH 3-STATE OUTPUTS
SDFS061A – D2932, MARCH 1987 – REVISED OCTOBER 1993
logic symbol†
1OE
1A1
1A2
1A3
1A4
1
logic diagram (positive logic)
1
1OE
EN
2
18
4
16
6
14
8
12
1Y1
2
18
4
16
1A1
1Y2
1Y3
1A2
14
1Y3
1A3
2OE
EN
8
2A1
2A2
2A3
2A4
11
9
13
7
15
5
17
3
1Y2
1Y4
6
19
1Y1
12
1Y4
1A4
2Y1
2Y2
2Y3
19
2OE
2Y4
† This symbol is in accordance with ANSI/IEEE Std 91-1984
and IEC Publication 617-12.
11
9
13
7
15
5
17
3
2Y1
2A1
2A2
2Y2
2Y3
2A3
2A4
2Y4
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)‡
Supply voltage range, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.5 V to 7 V
Input voltage range, VI (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 1.2 V to 7 V
Input current range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 30 mA to 5 mA
Voltage range applied to any output in the disabled or power-off state . . . . . . . . . . . . . . . . . . . – 0.5 V to 5.5 V
Voltage range applied to any output in the high state . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.5 V to VCC
Current into any output in the low state: SN54F240 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 mA
SN74F240 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128 mA
Operating free-air temperature range: SN54F240 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 55°C to 125°C
SN74F240 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C
Storage temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 65°C to 150°C
‡ Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTE 1: The input voltage ratings may be exceeded provided the input current ratings are observed.
2–2
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
SN54F240, SN74F240
OCTAL BUFFERS/DRIVERS
WITH 3-STATE OUTPUTS
SDFS061A – D2932, MARCH 1987 – REVISED OCTOBER 1993
recommended operating conditions
SN54F240
SN74F240
MIN
NOM
MAX
MIN
NOM
MAX
4.5
5
5.5
4.5
5
5.5
UNIT
VCC
VIH
Supply voltage
VIL
IIK
Low-level input voltage
0.8
0.8
V
Input clamp current
– 18
– 18
mA
IOH
IOL
High-level output current
– 12
– 15
mA
64
mA
TA
Operating free-air temperature
70
°C
High-level input voltage
2
2
Low-level output current
V
48
– 55
125
V
0
electrical characteristics over recommended operating free-air temperature range (unless
otherwise noted)
PARAMETER
VIK
VOH
TEST CONDITIONS
VCC = 4.5 V,
VCC = 4.5 V
VCC = 4.75 V,
VOL
VCC = 4
4.5
5V
IOZH
IOZL
VCC = 5.5 V,
VCC = 5.5 V,
II
IIH
VCC = 5.5 V,
VCC = 5.5 V,
IIL
IOS‡
VCC = 5.5 V,
VCC = 5.5 V,
ICC
VCC = 5.5 V
II = – 18 mA
IOH = – 3 mA
IOH = – 12 mA
IOH = – 15 mA
SN54F240
TYP†
MAX
MIN
– 1.2
2.4
3.3
2
3.2
IOH = – 3 mA
IOL = 48 mA
– 1.2
2.4
3.3
2
3.1
UNIT
V
V
2.7
0.38
IOL = 64 mA
VO = 2.7 V
0.55
0.42
VO = 0.5 V
VI = 7 V
VI = 2.7 V
VI = 0.5 V
VO = 0
Outputs high
SN74F240
TYP†
MAX
MIN
V
µA
50
50
– 50
– 50
µA
0.1
0.1
mA
20
20
µA
–1
mA
– 225
mA
–1
– 100
0.55
– 225
– 100
19
29
19
29
Outputs low
50
75
50
75
Outputs disabled
42
63
42
63
mA
† All typical values are at VCC = 5 V, TA = 25°C.
‡ Not more than one output should be shorted at a time, and the duration of the short circuit should not exceed one second.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
2–3
SN54F240, SN74F240
OCTAL BUFFERS/DRIVERS
WITH 3-STATE OUTPUTS
SDFS061A – D2932, MARCH 1987 – REVISED OCTOBER 1993
switching characteristics (see Note 2)
PARAMETER
FROM
(INPUT)
TO
(OUTPUT)
VCC = 5 V,
CL = 50 pF,
RL = 500 Ω,
TA = 25°C
VCC = 4.5 V to 5.5 V,
CL = 50 pF,
RL = 500 Ω,
TA = MIN to MAX†
′F240
tPLH
tPHL
Any A
Y
tPZH
tPZL
OE
Y
tPHZ
tPLZ
OE
Y
SN54F240
SN74F240
MIN
TYP
MAX
MIN
MAX
MIN
2.2
4.7
7
2.2
9
2.2
8
1.2
3.1
4.7
1.2
6
1.2
5.7
1.2
3.1
5.3
1.2
6.7
1.2
6.1
3.2
6.5
9
3.2
10.5
3.2
10
1.2
3.6
5.3
1.2
6.5
1.2
6.3
1.2
5.6
8
1.2
12.5
1.2
9.5
† For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions.
NOTE 2: Load circuits and waveforms are shown in Section 1.
2–4
POST OFFICE BOX 655303
UNIT
• DALLAS, TEXAS 75265
MAX
ns
ns
ns
PACKAGE OPTION ADDENDUM
www.ti.com
6-Dec-2022
PACKAGING INFORMATION
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
(2)
Lead finish/
Ball material
MSL Peak Temp
Op Temp (°C)
Device Marking
(3)
Samples
(4/5)
(6)
5962-9758501Q2A
ACTIVE
LCCC
FK
20
1
Non-RoHS
& Green
SNPB
N / A for Pkg Type
-55 to 125
59629758501Q2A
SNJ54F
240FK
5962-9758501QRA
ACTIVE
CDIP
J
20
1
Non-RoHS
& Green
SNPB
N / A for Pkg Type
-55 to 125
5962-9758501QR
A
SNJ54F240J
5962-9758501QSA
ACTIVE
CFP
W
20
1
Non-RoHS
& Green
SNPB
N / A for Pkg Type
-55 to 125
5962-9758501QS
A
SNJ54F240W
JM38510/33201B2A
ACTIVE
LCCC
FK
20
1
Non-RoHS
& Green
SNPB
N / A for Pkg Type
-55 to 125
JM38510/
33201B2A
Samples
JM38510/33201BRA
ACTIVE
CDIP
J
20
1
Non-RoHS
& Green
SNPB
N / A for Pkg Type
-55 to 125
JM38510/
33201BRA
Samples
JM38510/33201BSA
ACTIVE
CFP
W
20
1
Non-RoHS
& Green
SNPB
N / A for Pkg Type
-55 to 125
JM38510/
33201BSA
Samples
M38510/33201B2A
ACTIVE
LCCC
FK
20
1
Non-RoHS
& Green
SNPB
N / A for Pkg Type
-55 to 125
JM38510/
33201B2A
Samples
M38510/33201BRA
ACTIVE
CDIP
J
20
1
Non-RoHS
& Green
SNPB
N / A for Pkg Type
-55 to 125
JM38510/
33201BRA
Samples
M38510/33201BSA
ACTIVE
CFP
W
20
1
Non-RoHS
& Green
SNPB
N / A for Pkg Type
-55 to 125
JM38510/
33201BSA
Samples
SN54F240J
ACTIVE
CDIP
J
20
1
Non-RoHS
& Green
SNPB
N / A for Pkg Type
-55 to 125
SN54F240J
Samples
SN74F240DW
ACTIVE
SOIC
DW
20
25
RoHS & Green
NIPDAU
Level-1-260C-UNLIM
0 to 70
F240
Samples
SN74F240DWR
ACTIVE
SOIC
DW
20
2000
RoHS & Green
NIPDAU
Level-1-260C-UNLIM
0 to 70
F240
Samples
SN74F240N
ACTIVE
PDIP
N
20
20
RoHS &
Non-Green
NIPDAU
N / A for Pkg Type
0 to 70
SN74F240N
Samples
SN74F240NSR
ACTIVE
SO
NS
20
2000
RoHS & Green
NIPDAU
Level-1-260C-UNLIM
0 to 70
74F240
Samples
SNJ54F240FK
ACTIVE
LCCC
FK
20
1
Non-RoHS
& Green
SNPB
N / A for Pkg Type
-55 to 125
Addendum-Page 1
59629758501Q2A
SNJ54F
Samples
Samples
Samples
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
6-Dec-2022
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
(2)
Lead finish/
Ball material
MSL Peak Temp
Op Temp (°C)
Device Marking
(3)
Samples
(4/5)
(6)
240FK
SNJ54F240J
ACTIVE
CDIP
J
20
1
Non-RoHS
& Green
SNPB
N / A for Pkg Type
-55 to 125
5962-9758501QR
A
SNJ54F240J
SNJ54F240W
ACTIVE
CFP
W
20
1
Non-RoHS
& Green
SNPB
N / A for Pkg Type
-55 to 125
5962-9758501QS
A
SNJ54F240W
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance
do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may
reference these types of products as "Pb-Free".
RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption.
Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of