SN74F258NSRE4

SN54F258, SN74F258 QUADRUPLE 2-LINE TO 1-LINE DATA SELECTORS/MULTIPLEXERS WITH 3-STATE OUTPUTS SDFS067A − D2932, MARCH 1987 − REVISED OCTOBER 1993 • • • SN54F258 . . . J PACKAGE SN74F258 . . . D OR N PACKAGE (TOP VIEW) 3-State Outputs Interface Directly With System Bus Provides Bus Interface From Multiple Sources in High-Performance Systems Package Options Include Plastic Small-Outline Packages, Ceramic Chip Carriers, and Standard Plastic and Ceramic 300-mil DIPs A /B 1A 1B 1Y 2A 2B 2Y GND description The ′F258 is designed to multiplex signals from 4-bit data sources to 4-output data lines in bus-organized systems. The 3-state outputs will not load the data lines when the output-enable (OE) input is at a high logic level. A H X X X Z L L L X H L L H X L L H X L H L H X H L 3 14 4 13 5 12 6 11 7 10 8 9 VCC OE 4A 4B 4Y 3A 3B 3Y 4 3 2 1 20 19 18 5 17 6 16 7 15 8 14 9 10 11 12 13 4A 4B NC 4Y 3A 2Y GND NC 3Y 3B B OUTPUT Y A /B 15 1A A/B NC VCC OE 1B 1Y NC 2A 2B FUNCTION TABLE OE 16 2 SN54F258 . . . FK PACKAGE (TOP VIEW) The SN54F258 is characterized for operation over the full military temperature range of − 55°C to 125°C. The SN74F258 is characterized for operation from 0°C to 70°C. INPUTS 1 NC − No internal connection logic symbol† 15 OE 1 A /B 1A 1B 2A 2B 3A 3B 4A 4B EN G1 2 3 1 MUX 4 1 1Y 5 7 6 2Y 11 9 10 3Y 14 12 13 4Y † This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12. Pin numbers shown are for the D, J, and N packages. Copyright © 1993, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 2−1 SN54F258, SN74F258 QUADRUPLE 2-LINE TO 1-LINE DATA SELECTORS/MULTIPLEXERS WITH 3-STATE OUTPUTS SDFS067A − D2932, MARCH 1987 − REVISED OCTOBER 1993 logic diagram (positive logic) OE A /B 1A 1B 2A 15 1 2 4 3 5 7 2B 3A 3B 4A 4B 1Y 2Y 6 11 9 3Y 10 14 12 4Y 13 Pin numbers shown are for the D, J, and N packages. absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† Supply voltage range, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to 7 V Input voltage range (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −1.2 V to 7 V Input current range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −30 mA to 5 mA Voltage range applied to any output in the disabled or power-off state . . . . . . . . . . . . . . . . . . . −0.5 V to 5.5 V Voltage range applied to any output in the high state . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to VCC Current into any output in the low state: SN54F258 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 mA SN74F258 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 mA Operating free-air temperature range: SN54F258 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −55°C to 125°C SN74F258 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C Storage temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65°C to 150°C † Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTE 1: The input voltage ratings may be exceeded provided the input current ratings are observed. 2−2 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 SN54F258, SN74F258 QUADRUPLE 2-LINE TO 1-LINE DATA SELECTORS/MULTIPLEXERS WITH 3-STATE OUTPUTS SDFS067A − D2932, MARCH 1987 − REVISED OCTOBER 1993 recommended operating conditions SN54F258 SN74F258 MIN NOM MAX MIN NOM MAX 4.5 5 5.5 4.5 5 5.5 UNIT VCC Supply voltage VIH High-level input voltage VIL Low-level input voltage 0.8 0.8 V IIK Input clamp current −18 −18 mA IOH High-level output current −3 −3 mA IOL Low-level output current 24 mA TA Operating free-air temperature 70 °C 2 2 V 20 −55 125 V 0 electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) SN54F258 PARAMETER VIK VOH TEST CONDITIONS VCC = 4.5 V, VCC = 4 4.5 5V VCC = 4.75 V, MIN TYP† IOH = − 1 mA 2.5 IOH = − 3 mA 2.4 SN74F258 MIN TYP† 3.4 2.5 3.4 3.3 2.4 3.3 II = − 18 mA MAX −1.2 IOH = − 1 mA to − 3 mA MAX −1.2 UNIT V V 2.7 IOL = 20 mA 0.3 0.5 VOL 5V VCC = 4 4.5 IOZH VCC = 5.5 V, VO = 2.7 V 50 50 μA IOZL VCC = 5.5 V, VO = 0.5 V −50 −50 μA II VCC = 5.5 V, VI = 7 V 0.1 0.1 mA IIH VCC = 5.5 V, VI = 2.7 V 20 20 μA IIL VCC = 5.5 V, VI = 0.5 V − 0.6 mA IOS‡ VCC = 5.5 V, VO = 0 −150 mA ICCH ICCL ICCZ VCC = 5 5.5 5V V, See Note 2 IOL = 24 mA 0.35 − 0.6 −60 −150 −60 0.5 Condition A 6.2 9.5 6.2 9.5 Condition B 15.1 23 15.1 23 Condition C 11.3 17 11.3 17 V mA † All typical values are at VCC = 5 V, TA = 25°C. Not more than one output should be shorted at a time, and the duration of the short circuit should not exceed one second. NOTE 2: ICC is measured with the outputs open under the following conditions: A. All B inputs at 4.5 V, other inputs grounded B. A /B and all B inputs at 4.5 V, other inputs grounded C. OE and all B inputs at 4.5 V, other inputs grounded ‡ POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 2−3 SN54F258, SN74F258 QUADRUPLE 2-LINE TO 1-LINE DATA SELECTORS/MULTIPLEXERS WITH 3-STATE OUTPUTS SDFS067A − D2932, MARCH 1987 − REVISED OCTOBER 1993 switching characteristics (see Note 3) PARAMETER FROM (INPUT) TO (OUTPUT) VCC = 5 V, CL = 50 pF, R1 = 500 Ω, R2 = 500 Ω, TA = 25°C VCC = 4.5 V to 5.5 V, CL = 50 pF, R1 = 500 Ω, = 500 Ω, TA = MIN to MAX† R2 ′F258 tPLH tPHL tPLH tPHL tPZH tPZL tPHZ tPLZ Data (A or B) Any Y A/B Any Y G Any Y G Any Y SN54F258 SN74F258 MIN TYP MAX MIN MAX MIN 1 3.6 5.3 1 7.5 1 6 1 3.1 4.7 1 6 1 5.5 3.2 6.1 8.5 3.2 12 3.2 9.5 3.2 6.9 9.5 3.2 11.5 3.2 11 2.2 5.5 7.5 2.2 11 2.2 8.5 2.2 5.1 7.5 2.2 9.5 2.2 8.5 1.2 3.9 6 1 7 1.2 7 1.2 4.1 6 1.2 9 1.2 7 † For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions. NOTE 3: Load circuits and waveforms are shown in Section 1. 2−4 POST OFFICE BOX 655303 UNIT • DALLAS, TEXAS 75265 MAX ns ns ns ns PACKAGE MATERIALS INFORMATION www.ti.com 5-Jan-2022 TUBE *All dimensions are nominal Device Package Name Package Type Pins SPQ L (mm) W (mm) T (µm) B (mm) SN74F258D D SOIC 16 40 507 8 3940 4.32 SN74F258DG4 D SOIC 16 40 507 8 3940 4.32 SN74F258N N PDIP 16 25 506 13.97 11230 4.32 SN74F258N N PDIP 16 25 506 13.97 11230 4.32 Pack Materials-Page 1 IMPORTANT NOTICE AND DISCLAIMER TI PROVIDES TECHNICAL AND RELIABILITY DATA (INCLUDING DATA SHEETS), DESIGN RESOURCES (INCLUDING REFERENCE DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND OTHER RESOURCES “AS IS” AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS. These resources are intended for skilled developers designing with TI products. You are solely responsible for (1) selecting the appropriate TI products for your application, (2) designing, validating and testing your application, and (3) ensuring your application meets applicable standards, and any other safety, security, regulatory or other requirements. These resources are subject to change without notice. TI grants you permission to use these resources only for development of an application that uses the TI products described in the resource. Other reproduction and display of these resources is prohibited. No license is granted to any other TI intellectual property right or to any third party intellectual property right. TI disclaims responsibility for, and you will fully indemnify TI and its representatives against, any claims, damages, costs, losses, and liabilities arising out of your use of these resources. TI’s products are provided subject to TI’s Terms of Sale or other applicable terms available either on ti.com or provided in conjunction with such TI products. TI’s provision of these resources does not expand or otherwise alter TI’s applicable warranties or warranty disclaimers for TI products. TI objects to and rejects any additional or different terms you may have proposed. IMPORTANT NOTICE Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2022, Texas Instruments Incorporated