SN54F74, SN74F74
DUAL POSITIVE-EDGE-TRIGGERED D-TYPE FLIP-FLOPS
WITH CLEAR AND PRESET
SDFS046A – MARCH 1987 – REVISED OCTOBER 1993
•
Package Options Include Plastic
Small-Outline Packages, Ceramic Chip
Carriers, and Standard Plastic and Ceramic
300-mil DIPs
SN54F74 . . . J PACKAGE
SN74F74 . . . D OR N PACKAGE
(TOP VIEW)
1CLR
1D
1CLK
1PRE
1Q
1Q
GND
description
3
12
4
11
5
10
6
9
7
8
VCC
2CLR
2D
2CLK
2PRE
2Q
2Q
SN54F74 . . . FK PACKAGE
(TOP VIEW)
1CLK
NC
1PRE
NC
1Q
FUNCTION TABLE
INPUTS
13
4
3 2 1 20 19
18
5
17
6
16
7
15
8
14
9 10 11 12 13
2D
NC
2CLK
NC
2PRE
1Q
GND
NC
2Q
2Q
The SN54F74 is characterized for operation over
the full military temperature range of – 55°C to
125°C. The SN74F74 is characterized for
operation from 0°C to 70°C.
14
2
1D
1CLR
NC
VCC
2CLR
These devices contain two independent positiveedge-triggered D-type flip-flops. A low level at the
preset (PRE) or clear (CLR) inputs sets or resets
the outputs regardless of the levels of the other
inputs. When PRE and CLR are inactive (high),
data at the data (D) input meeting the setup time
requirements is transferred to the outputs on the
positive-going edge of the clock pulse. Clock
triggering occurs at a voltage level and is not
directly related to the rise time of the clock pulse.
Following the hold-time interval, data at the
D input may be changed without affecting the
levels at the outputs.
1
OUTPUTS
PRE
CLR
CLK
D
Q
L
H
X
X
H
L
H
L
X
X
H
H†
L
NC – No internal connection
Q
L
L
X
X
L
H†
H
H
↑
H
H
H
H
↑
L
L
H
H
H
L
X
Q0
Q0
† The output levels are not guaranteed to meet the
minimum levels for VOH. Furthermore, this
configuration is nonstable; that is, it will not persist
when PRE or CLR returns to its inactive (high)
level.
Copyright 1993, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
2–1
SN54F74, SN74F74
DUAL POSITIVE-EDGE-TRIGGERED D-TYPE FLIP-FLOPS
WITH CLEAR AND PRESET
SDFS046A – MARCH 1987 – REVISED OCTOBER 1993
logic symbol†
4
1PRE
1CLK
1D
1
1CLR
6
9
11
2CLK
1Q
R
10
2PRE
1Q
C1
2
1D
5
S
3
2Q
12
2D
8
13
2CLR
2Q
† This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12.
Pin numbers shown are for the D, J, and N packages.
logic diagram, each flip-flop (positive logic)
PRE
CLK
C
C
C
Q
TG
C
C
C
C
D
TG
TG
TG
C
C
C
Q
CLR
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)‡
Supply voltage range, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.5 V to 7 V
Input voltage range, VI (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 1.2 V to 7 V
Input current range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 30 mA to 5 mA
Voltage range applied to any output in the high state . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.5 V to VCC
Current into any output in the low state . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 mA
Operating free-air temperature range: SN54F74 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 55°C to 125°C
SN74F74 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C
Storage temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 65°C to 150°C
‡ Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTE 1: The input voltage ratings may be exceeded provided the input current ratings are observed.
2–2
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
SN54F74, SN74F74
DUAL POSITIVE-EDGE-TRIGGERED D-TYPE FLIP-FLOPS
WITH CLEAR AND PRESET
SDFS046A – MARCH 1987 – REVISED OCTOBER 1993
recommended operating conditions
SN54F74
VCC
VIH
Supply voltage
VIL
IIK
Low-level input voltage
IOH
IOL
High-level output current
TA
Operating free-air temperature
High-level input voltage
SN74F74
MIN
NOM
MAX
MIN
NOM
MAX
4.5
5
5.5
4.5
5
5.5
2
2
Input clamp current
Low-level output current
V
V
0.8
0.8
V
– 18
– 18
mA
–1
–1
mA
20
mA
70
°C
20
– 55
UNIT
125
0
electrical characteristics over recommended operating free-air temperature range (unless
otherwise noted)
PARAMETER
VIK
VOH
VOL
II
IIH
IIL
Data, CLK
PRE or CLR
TEST CONDITIONS
VCC = 4.5 V,
VCC = 4.5 V,
II = – 18 mA
IOH = – 1 mA
VCC = 4.75 V,
VCC = 4.5 V,
IOH = – 1 mA
IOL = 20 mA
VCC = 5.5 V,
VCC = 5.5 V,
VI = 7 V
VI = 2.7 V
VCC = 5
5.5
5V
V,
MIN
SN54F74
TYP†
MAX
MIN
SN74F74
TYP†
MAX
– 1.2
2.5
3.4
– 1.2
2.5
3.4
0.5
0.3
0.1
VI = 0
0.5
5V
0.5
V
0.1
mA
µA
20
20
– 0.6
– 0.6
– 1.8
– 1.8
IOS‡
VCC = 5.5 V,
VO = 0
– 60
–150
– 60
ICC
VCC = 5.5 V,
See Note 2
10.5
16
10.5
† All typical values are at VCC = 5 V, TA = 25°C.
‡ Not more than one output should be shorted at a time, and the duration of the short circuit should not exceed one second.
NOTE 2: ICC is measured with D, CLK, and PRE grounded then with D, CLK, and CLR grounded.
V
V
2.7
0.3
UNIT
mA
–150
mA
16
mA
timing requirements over recommended ranges of supply voltage and operating free-air
temperature (unless otherwise noted)
VCC = 5 V,
TA = 25°C
SN54F74
SN74F74
′F74
fclock
Clock frequency
tw
Pulse duration
tsu
Setup time,
time data before CLK↑
Setup time, inactive-state before CLK↑§
th
Hold time
time, data after CLK↑
MIN
MAX
MIN
MAX
MIN
MAX
0
100
0
80
0
100
CLK high, PRE or CLR low
4
4
4
CLK low
5
6
5
High
2
3
2
Low
3
4
3
PRE or CLR to CLK
2
3
2
High
1
2
1
Low
1
2
1
UNIT
MHz
ns
ns
ns
§ Inactive-state setup time is also referred to as recovery time.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
2–3
SN54F74, SN74F74
DUAL POSITIVE-EDGE-TRIGGERED D-TYPE FLIP-FLOPS
WITH CLEAR AND PRESET
SDFS046A – MARCH 1987 – REVISED OCTOBER 1993
switching characteristics (see Note 3)
PARAMETER
FROM
(INPUT)
TO
(OUTPUT)
VCC = 5 V,
CL = 50 pF,
RL = 500 Ω,
TA = 25°C
VCC = 4.5 V to 5.5 V,
CL = 50 pF,
RL = 500 Ω,
TA = MIN to MAX†
′F74
SN54F74
SN74F74
MIN
MIN
MIN
TYP
100
145
3
4.9
6.8
3.8
8.5
3
7.8
3.6
5.8
8
4.4
10.5
3.6
9.2
2.4
4.2
6.1
3.2
8
2.4
PRE or CLR
Q or Q
tPHL
2.7
6.6
9
3.5
11.5
2.7
† For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions.
NOTE 3: Load circuits and waveforms are shown in Section 1.
7.1
fmax
tPLH
tPHL
tPLH
2–4
CLK
Q or Q
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
MAX
UNIT
MAX
80
MAX
100
MHz
10.5
ns
ns
PACKAGE OPTION ADDENDUM
www.ti.com
14-Oct-2022
PACKAGING INFORMATION
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
(2)
Lead finish/
Ball material
MSL Peak Temp
Op Temp (°C)
Device Marking
(3)
Samples
(4/5)
(6)
5962-9759201Q2A
ACTIVE
LCCC
FK
20
1
Non-RoHS
& Green
SNPB
N / A for Pkg Type
-55 to 125
59629759201Q2A
SNJ54F
74FK
5962-9759201QCA
ACTIVE
CDIP
J
14
1
Non-RoHS
& Green
SNPB
N / A for Pkg Type
-55 to 125
5962-9759201QC
A
SNJ54F74J
5962-9759201QDA
ACTIVE
CFP
W
14
1
Non-RoHS
& Green
SNPB
N / A for Pkg Type
-55 to 125
5962-9759201QD
A
SNJ54F74W
JM38510/34101B2A
ACTIVE
LCCC
FK
20
1
Non-RoHS
& Green
SNPB
N / A for Pkg Type
-55 to 125
JM38510/
34101B2A
Samples
JM38510/34101BCA
ACTIVE
CDIP
J
14
1
Non-RoHS
& Green
SNPB
N / A for Pkg Type
-55 to 125
JM38510/
34101BCA
Samples
JM38510/34101BDA
ACTIVE
CFP
W
14
1
Non-RoHS
& Green
SNPB
N / A for Pkg Type
-55 to 125
JM38510/
34101BDA
Samples
M38510/34101B2A
ACTIVE
LCCC
FK
20
1
Non-RoHS
& Green
SNPB
N / A for Pkg Type
-55 to 125
JM38510/
34101B2A
Samples
M38510/34101BCA
ACTIVE
CDIP
J
14
1
Non-RoHS
& Green
SNPB
N / A for Pkg Type
-55 to 125
JM38510/
34101BCA
Samples
M38510/34101BDA
ACTIVE
CFP
W
14
1
Non-RoHS
& Green
SNPB
N / A for Pkg Type
-55 to 125
JM38510/
34101BDA
Samples
SN54F74J
ACTIVE
CDIP
J
14
1
Non-RoHS
& Green
SNPB
N / A for Pkg Type
-55 to 125
SN54F74J
Samples
SN74F74D
ACTIVE
SOIC
D
14
50
RoHS & Green
NIPDAU
Level-1-260C-UNLIM
0 to 70
F74
Samples
SN74F74DG4
ACTIVE
SOIC
D
14
50
RoHS & Green
NIPDAU
Level-1-260C-UNLIM
0 to 70
F74
Samples
SN74F74DR
ACTIVE
SOIC
D
14
2500
RoHS & Green
NIPDAU
Level-1-260C-UNLIM
0 to 70
F74
Samples
SN74F74DRG4
ACTIVE
SOIC
D
14
2500
RoHS & Green
NIPDAU
Level-1-260C-UNLIM
0 to 70
F74
Samples
SN74F74N
ACTIVE
PDIP
N
14
25
RoHS & Green
NIPDAU
N / A for Pkg Type
0 to 70
SN74F74N
Samples
SN74F74NE4
ACTIVE
PDIP
N
14
25
RoHS & Green
NIPDAU
N / A for Pkg Type
0 to 70
SN74F74N
Samples
Addendum-Page 1
Samples
Samples
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
14-Oct-2022
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
(2)
Lead finish/
Ball material
MSL Peak Temp
Op Temp (°C)
Device Marking
(3)
Samples
(4/5)
(6)
SN74F74NSR
ACTIVE
SO
NS
14
2000
RoHS & Green
NIPDAU
Level-1-260C-UNLIM
0 to 70
74F74
SNJ54F74FK
ACTIVE
LCCC
FK
20
1
Non-RoHS
& Green
SNPB
N / A for Pkg Type
-55 to 125
59629759201Q2A
SNJ54F
74FK
SNJ54F74J
ACTIVE
CDIP
J
14
1
Non-RoHS
& Green
SNPB
N / A for Pkg Type
-55 to 125
5962-9759201QC
A
SNJ54F74J
SNJ54F74W
ACTIVE
CFP
W
14
1
Non-RoHS
& Green
SNPB
N / A for Pkg Type
-55 to 125
5962-9759201QD
A
SNJ54F74W
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance
do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may
reference these types of products as "Pb-Free".
RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption.
Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of