SN74LV138ANSR

SN54LV138A, SN74LV138A 3-LINE TO 8-LINE DECODERS/DEMULTIPLEXERS www.ti.com SCLS395L – APRIL 1998 – REVISED AUGUST 2005 FEATURES SN54LV138A . . . J OR W PACKAGE SN74LV138A . . . D, DB, DGV, NS OR PW PACKAGE (TOP VIEW) 2 16 15 3 14 4 13 5 12 6 11 7 10 8 9 • SN54LV138A . . . FK PACKAGE (TOP VIEW) VCC Y0 Y1 Y2 Y3 Y4 Y5 Y6 B C G2A G2B G1 Y7 1 16 B A NC VCC Y0 SN74LV138A . . . RGY PACKAGE (TOP VIEW) 2 15 3 4 14 13 5 12 6 11 10 7 8 9 C G2A NC G2B G1 Y0 Y1 Y2 Y3 Y4 Y5 4 3 2 1 20 19 18 5 6 17 16 7 8 15 14 9 10 11 12 13 Y1 Y2 NC Y3 Y4 Y7 GND NC Y6 Y5 1 • VCC A B C G2A G2B G1 Y7 GND Ioff Supports Partial-Power-Down Mode Operation Latch-Up Performance Exceeds 250 mA Per JESD 17 ESD Protection Exceeds JESD 22 – 2000-V Human-Body Model (A114-A) – 200-V Machine Model (A115-A) – 1000-V Charged-Device Model (C101) Y6 • • A • 2-V to 5.5-V VCC Operation Max tpd of 9.5 ns at 5 V Typical VOLP (Output Ground Bounce) 2.3 V at VCC = 3.3 V, TA = 25°C Support Mixed-Mode Voltage Operation on All Ports GND • • • NC − No internal connection DESCRIPTION/ORDERING INFORMATION The 'LV138A devices are 3-line to 8-line decoders/demultiplexers designed for 2-V to 5.5-V VCC operation. ORDERING INFORMATION PACKAGE (1) TA QFN – RGY SN74LV138ARGYR Tube of 40 SN74LV138AD Reel of 2500 SN74LV138ADR SOP – NS Reel of 2000 SN74LV138ANSR 74LV138A SSOP – DB Reel of 2000 SN74LV138ADBR LV138A Tube of 90 SN74LV138APW Reel of 2000 SN74LV138APWR TSSOP – PW –55°C to 125°C (1) TOP-SIDE MARKING Reel of 1000 SOIC – D –40°C to 85°C ORDERABLE PART NUMBER LV138A LV138A LV138A Reel of 250 SN74LV138APWT TVSOP – DGV Reel of 2000 SN74LV138ADGVR LV138A CDIP – J Tube of 25 SNJ54LV138AJ SNJ54LV138AJ CFP – W Tube of 150 SNJ54LV138AW SNJ54LV138AW LCCC – FK Tube of 55 SNJ54LV138AFK SNJ54LV138AFK Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. UNLESS OTHERWISE NOTED this document contains PRODUCTION DATA information current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright © 1998–2005, Texas Instruments Incorporated SN54LV138A, SN74LV138A 3-LINE TO 8-LINE DECODERS/DEMULTIPLEXERS www.ti.com SCLS395L – APRIL 1998 – REVISED AUGUST 2005 DESCRIPTION/ORDERING INFORMATION (CONTINUED) These devices are designed for high-performance memory-decoding or data-routing applications requiring very short propagation delay times. In high-performance memory systems, these decoders can be used to minimize the effects of system decoding. When employed with high-speed memories utilizing a fast enable circuit, the delay times of these decoders and the enable time of the memory usually are less than the typical access time of the memory. This means that the effective system delay introduced by the decoder is negligible. The conditions at the binary-select inputs (A, B, C) and the three enable inputs (G1, G2A, G2B) select one of eight output lines. The two active-low (G2A, G2B) and one active-high (G1) enable inputs reduce the need for external gates or inverters when expanding. A 24-line decoder can be implemented without external inverters and a 32-line decoder requires only one inverter. An enable input can be used as a data input for demultiplexing applications. These devices are fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the devices when they are powered down. FUNCTION TABLE 2 ENABLE INPUTS SELECT INPUTS G1 G2A G2B C B A Y0 Y1 Y20 OUTPUTS Y3 Y4 Y5 Y6 Y7 X H X X X X H H H H H H H H X X H X X X H H H H H H H H L X X X X X H H H H H H H H H L L L L L L H H H H H H H H L L L L H H L H H H H H H H L L L H L H H L H H H H H H L L L H H H H H L H H H H H L L H L L H H H H L H H H H L L H L H H H H H H L H H H L L H H L H H H H H H L H H L L H H H H H H H H H H L SN54LV138A, SN74LV138A 3-LINE TO 8-LINE DECODERS/DEMULTIPLEXERS www.ti.com SCLS395L – APRIL 1998 – REVISED AUGUST 2005 LOGIC DIAGRAM (POSITIVE LOGIC) 15 A 1 14 Select Inputs B 13 3 12 11 10 Enable Inputs 6 4 G2A G2B Y1 2 C G1 Y0 9 7 Y2 Y3 Data Outputs Y4 Y5 Y6 Y7 5 Pin numbers shown are for the D, DB, DGV, J, NS, PW, RGY, and W packages. 3 SN54LV138A, SN74LV138A 3-LINE TO 8-LINE DECODERS/DEMULTIPLEXERS www.ti.com SCLS395L – APRIL 1998 – REVISED AUGUST 2005 Absolute Maximum Ratings (1) over operating free-air temperature range (unless otherwise noted) MIN MAX VCC Supply voltage range –0.5 7 V VI Input voltage range (2) –0.5 7 V –0.5 7 V –0.5 VCC + 0.5 state (2) UNIT VO Voltage range applied to any output in the high-impedance or power-off VO Output voltage range (2) (3) IIK Input clamp current VI < 0 –20 mA IOK Output clamp current VO < 0 –50 mA IO Continuous output current VO = 0 to VCC ±25 mA ±50 mA Continuous current through VCC or GND D package (4) 73 DB package (4) θJA Package thermal impedance 82 DGV package (4) 120 NS package (4) 64 PW package (4) 108 RGY package (5) Tstg (1) (2) (3) (4) (5) 4 Storage temperature range V °C/W 39 –65 150 °C Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. The input and output negative-voltage ratings may be exceeded if the input and output current ratings are observed. This value is limited to 5.5 V maximum. The package thermal impedance is calculated in accordance with JESD 51-7 The package thermal impedance is calculated in accordance with JESD 51-5. SN54LV138A, SN74LV138A 3-LINE TO 8-LINE DECODERS/DEMULTIPLEXERS www.ti.com SCLS395L – APRIL 1998 – REVISED AUGUST 2005 Recommended Operating Conditions (1) SN54LV138A (2) VCC Supply voltage VCC = 2 V VIH High-level input voltage MIN MAX 2 5.5 Low-level input voltage MIN MAX 2 5.5 1.5 1.5 VCC = 2.3 V to 2.7 V VCC × 0.7 VCC × 0.7 VCC = 3 V to 3.6 V VCC × 0.7 VCC × 0.7 VCC = 4.5 V to 5.5 V VCC × 0.7 VCC × 0.7 VCC = 2 V VIL SN74LV138A UNIT V V 0.5 0.5 VCC = 2.3 V to 2.7 V VCC × 0.3 VCC × 0.3 VCC = 3 V to 3.6 V VCC × 0.3 VCC × 0.3 VCC = 4.5 V to 5.5 V VCC × 0.3 VCC × 0.3 V VI Input voltage 0 5.5 0 5.5 VO Output voltage 0 VCC 0 VCC V –50 –50 µA VCC = 2.3 V to 2.7 V –2 –2 VCC = 3 V to 3.6 V –6 –6 –12 –12 50 50 2 2 VCC = 2 V IOH High-level output current VCC = 4.5 V to 5.5 V VCC = 2 V IOL Low-level output current ∆t/∆v Input transition rise or fall rate VCC = 2.3 V to 2.7 V VCC = 3 V to 3.6 V 6 6 VCC = 4.5 V to 5.5 V 12 12 VCC = 2.3 V to 2.7 V 200 200 VCC = 3 V to 3.6 V 100 100 20 20 VCC = 4.5 V to 5.5 V TA (1) (2) Operating free-air temperature –55 125 –40 85 V mA µA mA ns/V °C All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, literature number SCBA004. Product Preview Electrical Characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER VOH TEST CONDITIONS IOH = –50 µA 2 V to 5.5 V IOH = –2 mA 2.3 V IOH = –6 mA IOH = –12 mA VOL SN54LV138A (1) MIN SN74LV138A TYP MAX MIN VCC – 0.1 VCC – 0.1 2 2 3V 2.48 2.48 4.5 V 3.8 TYP MAX 3.8 2 V to 5.5 V 0.1 0.1 IOL = 2 mA 2.3 V 0.4 0.4 IOL = 6 mA 3V 0.44 0.44 4.5 V II VI = 5.5 V or GND ICC VI = VCC or GND, Ioff VI or VO = 0 to 5.5 V Ci VI = VCC or GND IO = 0 UNIT V IOL = 50 µA IOL = 12 mA (1) VCC V 0.55 0.55 0 to 5.5 V ±1 ±1 µA 5.5 V 20 20 µA 0 5 5 µA 3.3 V 2.1 2.1 pF Product Preview 5 SN54LV138A, SN74LV138A 3-LINE TO 8-LINE DECODERS/DEMULTIPLEXERS www.ti.com SCLS395L – APRIL 1998 – REVISED AUGUST 2005 Switching Characteristics over recommended operating free-air temperature range, VCC = 2.5 V ± 0.2 V (unless otherwise noted) (see Figure 1) PARAMETER tpd FROM (INPUT) TO (OUTPUT) LOAD CAPACITANCE MAX MIN MAX MIN MAX A, B, or C 11.7 (2) 17.6 (2) 1 (2) 21 (2) 1 21 G1 12.3 (2) 19.2 (2) 1 (2) 22 (2) 1 22 11.4 (2) 18.2 (2) 1 (2) 21 (2) 1 21 14.9 21.4 1 25 1 25 15.7 22.6 1 26 1 26 14.8 22 1 25 1 25 CL = 15 pF A, B, or C G1 Y CL = 50 pF G2A or G2B (1) (2) SN74LV138A TYP Y MIN G2A or G2B tpd SN54LV138A (1) TA = 25°C UNIT ns ns Product Preview On products compliant to MIL-PRF-38535, this parameter is not production tested. Switching Characteristics over recommended operating free-air temperature range, VCC = 3.3 V ± 0.3 V (unless otherwise noted) (see Figure 1) PARAMETER tpd tpd FROM (INPUT) TO (OUTPUT) LOAD CAPACITANCE SN74LV138A TYP MAX MIN MAX MIN MAX A, B, or C 8.1 (2) 11.4 (2) 1 (2) 13.5 (2) 1 13.5 G1 8.4 (2) 12.8 (2) 1 (2) 15 (2) 1 15 G2A or G2B 7.8 (2) 11.4 (2) 1 (2) 13.5 (2) 1 13.5 A, B, or C 10.3 15.8 1 18 1 18 10.6 16.3 1 18.5 1 18.5 10 14.9 1 17 1 17 Y G1 Y MIN CL = 15 pF CL = 50 pF G2A or G2B (1) (2) SN54LV138A (1) TA = 25°C UNIT ns ns Product Preview On products compliant to MIL-PRF-38535, this parameter is not production tested. Switching Characteristics over recommended operating free-air temperature range, VCC = 5 V ± 0.5 V (unless otherwise noted) (see Figure 1) PARAMETER tpd FROM (INPUT) TO (OUTPUT) LOAD CAPACITANCE MAX MIN MAX MIN MAX A, B, or C 5.6 (2) 8.1 (2) 1 (2) 9.5 (2) 1 9.5 G1 5.7 (2) 8.1 (2) 1 (2) 9.5 (2) 1 9.5 5.4 (2) 8.1 (2) 1 (2) 9.5 (2) 1 9.5 7 10.1 1 11.5 1 11.5 7.1 10.1 1 11.5 1 11.5 6.8 10.1 1 11.5 1 11.5 Y CL = 15 pF A, B, or C G1 Y G2A or G2B (1) (2) CL = 50 pF MIN SN74LV138A TYP G2A or G2B tpd SN54LV138A (1) TA = 25°C UNIT ns ns Product Preview On products compliant to MIL-PRF-38535, this parameter is not production tested. Operating Characteristics TA = 25°C PARAMETER Cpd 6 Power dissipation capacitance TEST CONDITIONS CL = 50 pF, f = 10 MHz VCC TYP 3.3 V 16.8 5V 19.1 UNIT pF SN54LV138A, SN74LV138A 3-LINE TO 8-LINE DECODERS/DEMULTIPLEXERS www.ti.com SCLS395L – APRIL 1998 – REVISED AUGUST 2005 PARAMETER MEASUREMENT INFORMATION VCC From Output Under Test Test Point RL = 1 kΩ From Output Under Test CL (see Note A) S1 Open TEST GND CL (see Note A) LOAD CIRCUIT FOR TOTEM-POLE OUTPUTS S1 tPLH/tPHL tPLZ/tPZL tPHZ/tPZH Open Drain Open VCC GND VCC LOAD CIRCUIT FOR 3-STATE AND OPEN-DRAIN OUTPUTS VCC 50% VCC Timing Input 0V tw tsu VCC 50% VCC Input 50% VCC th VCC 50% VCC Data Input 50% VCC 0V 0V VOLTAGE WAVEFORMS PULSE DURATION VOLTAGE WAVEFORMS SETUP AND HOLD TIMES VCC 50% VCC Input 50% VCC tPLH tPHL 50% VCC tPHL 50% VCC VOL VOH 50% VCC VOL VOLTAGE WAVEFORMS PROPAGATION DELAY TIMES INVERTING AND NONINVERTING OUTPUTS 50% VCC 0V tPLZ ≈VCC Output Waveform 1 S1 at VCC (see Note B) 50% VCC tPZH tPLH 50% VCC 50% VCC tPZL VOH In-Phase Output Out-of-Phase Output 0V VCC Output Control Output Waveform 2 S1 at GND (see Note B) VOL + 0.3 V VOL tPHZ 50% VCC VOH − 0.3 V VOH ≈0 V VOLTAGE WAVEFORMS ENABLE AND DISABLE TIMES LOW- AND HIGH-LEVEL ENABLING NOTES: A. CL includes probe and jig capacitance. B. Waveform 1 is for an output with internal conditions such that the output is low, except when disabled by the output control. Waveform 2 is for an output with internal conditions such that the output is high, except when disabled by the output control. C. All input pulses are supplied by generators having the following characteristics: PRR ≤ 1 MHz, ZO = 50 Ω, tr ≤ 3 ns, tf ≤ 3 ns. D. The outputs are measured one at a time, with one input transition per measurement. E. tPLZ and tPHZ are the same as tdis. F. tPZL and tPZH are the same as ten. G. tPHL and tPLH are the same as tpd. H. All parameters and waveforms are not applicable to all devices. Figure 1. Load Circuits and Voltage Waveforms 7 PACKAGE OPTION ADDENDUM www.ti.com 14-Oct-2022 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan (2) Lead finish/ Ball material MSL Peak Temp Op Temp (°C) Device Marking (3) Samples (4/5) (6) SN74LV138AD ACTIVE SOIC D 16 40 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 LV138A Samples SN74LV138ADBR ACTIVE SSOP DB 16 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 LV138A Samples SN74LV138ADGVR ACTIVE TVSOP DGV 16 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 LV138A Samples SN74LV138ADR ACTIVE SOIC D 16 2500 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 LV138A Samples SN74LV138ANSR ACTIVE SO NS 16 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 74LV138A Samples SN74LV138APW ACTIVE TSSOP PW 16 90 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 LV138A Samples SN74LV138APWR ACTIVE TSSOP PW 16 2000 RoHS & Green NIPDAU | SN Level-1-260C-UNLIM -40 to 85 LV138A Samples SN74LV138APWRG4 ACTIVE TSSOP PW 16 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 LV138A Samples SN74LV138APWT ACTIVE TSSOP PW 16 250 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 LV138A Samples SN74LV138ARGYR ACTIVE VQFN RGY 16 3000 RoHS & Green NIPDAU Level-2-260C-1 YEAR -40 to 85 LV138A Samples (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of