SN54LVC06A, SN74LVC06A
HEX INVERTER BUFFERS/DRIVERS
WITH OPEN-DRAIN OUTPUTS
www.ti.com
SCAS596N – OCTOBER 1997 – REVISED JULY 2005
FEATURES
•
•
Operate From 1.65 V to 3.6 V
Specified From –40°C to 85°C,
–40°C to 125°C, and –55°C to 125°C
Inputs and Open-Drain Outputs Accept
Voltages up to 5.5 V
SN54LVC06A . . . J OR W PACKAGE
SN74LVC06A . . . D, DB, DGV, NS,
OR PW PACKAGE
(TOP VIEW)
2
13
3
12
4
11
5
10
6
7
9
8
VCC
6A
6Y
5A
5Y
4A
4Y
1Y
2A
2Y
3A
3Y
1
14
1Y
1A
NC
VCC
6A
VCC
14
2
13 6A
3
12 6Y
4
11 5A
5
6
10 5Y
9 4A
7
8
4Y
1
SN54LVC06A . . . FK PACKAGE
(TOP VIEW)
SN74LVC06A . . . RGY PACKAGE
(TOP VIEW)
1A
1A
1Y
2A
2Y
3A
3Y
GND
•
GND
•
Max tpd of 3.7 ns at 3.3 V
Ioff Supports Partial-Power-Down Mode
Operation
Latch-Up Performance Exceeds 250 mA Per
JESD 17
2A
NC
2Y
NC
3A
4
3 2 1 20 19
18
5
6
17
16
7
8
15
14
9 10 11 12 13
6Y
NC
5A
NC
5Y
3Y
GND
NC
4Y
4A
•
•
NC - No internal connection
DESCRIPTION/ORDERING INFORMATION
These hex inverter buffers/drivers are designed for 1.65-V to 3.6-V VCC operation.
The outputs of the 'LVC06A devices are open drain and can be connected to other open-drain outputs to
implement active-low wired-OR or active-high wired-AND functions. The maximum sink current is 24 mA.
Inputs can be driven from either 3.3-V or 5-V devices. This feature allows the use of these devices as translators
in a mixed 3.3-V/5-V system environment.
ORDERING INFORMATION
PACKAGE (1)
TA
–40°C to 85°C
QFN – RGY
Tube of 50
SN74LVC06AD
Reel of 2500
SN74LVC06ADR
Reel of 250
SN74LVC06ADT
SOP – NS
Reel of 2000
SN74LVC06ANSR
LVC06A
SSOP – DB
Reel of 2000
SN74LVC06ADBR
LC06A
Tube of 90
SN74LVC06APW
Reel of 2000
SN74LVC06APWR
TSSOP – PW
–55°C to 125°C
(1)
TOP-SIDE MARKING
SN74LVC06ARGYR
SOIC – D
–40°C to 125°C
ORDERABLE PART NUMBER
Reel of 1000
LC06A
LVC06A
LC06A
Reel of 250
SN74LVC06APWT
TVSOP – DGV
Reel of 2000
SN74LVC06ADGVR
LC06A
CDIP – J
Tube of 25
SNJ54LVC06AJ
SNJ54LVC06AJ
CFP – W
Tube of 150
SNJ54LVC06AW
SNJ54LVC06AW
LCCC – FK
Tube of 55
SNJ54LVC06AFK
SNJ54LVC06AFK
Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at
www.ti.com/sc/package.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
UNLESS OTHERWISE NOTED this document contains PRODUCTION DATA information current as of publication date. Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily
include testing of all parameters.
Copyright © 1997–2005, Texas Instruments Incorporated
SN54LVC06A, SN74LVC06A
HEX INVERTER BUFFERS/DRIVERS
WITH OPEN-DRAIN OUTPUTS
www.ti.com
SCAS596N – OCTOBER 1997 – REVISED JULY 2005
DESCRIPTION/ORDERING INFORMATION (CONTINUED)
These devices are fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the
outputs, preventing damaging current backflow through the device when it is powered down.
FUNCTION TABLE
(EACH INVERTER)
INPUT
A
OUTPUT
Y
H
L
L
H
LOGIC DIAGRAM, EACH INVERTER (POSITIVE LOGIC)
A
Y
Absolute Maximum Ratings (1)
over operating free-air temperature range (unless otherwise noted)
MIN
MAX
Supply voltage range
–0.5
6.5
V
VI
Input voltage
range (2)
–0.5
6.5
V
VO
Output voltage range
–0.5
6.5
V
IIK
Input clamp current
VI < 0
–50
mA
IOK
Output clamp current
VO < 0
–50
mA
IO
Continuous output current
±50
mA
±100
mA
VCC
Continuous current through VCC or GND
D
package (3)
86
DB package (3)
θJA
Package thermal impedance
96
DGV package (3)
127
NS package (3)
76
PW package (3)
113
RGY package (4)
Tstg
Ptot
(1)
(2)
(3)
(4)
(5)
(6)
2
Storage temperature range
Power
dissipation (5) (6)
°C/W
47
–65
TA = –40°C to 125°C
UNIT
150
°C
500
mW
Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
The input and output negative-voltage ratings may be exceeded if the input and output current ratings are observed.
The package thermal impedance is calculated in accordance with JESD 51-7.
The package thermal impedance is calculated in accordance with JESD 51-5.
For the D package: above 70°C the value of Ptot derates linearly with 8 mW/K.
For the DB, DGV, NS, and PW packages: above 60°C the value of Ptot derates linearly with 5.5 mW/K.
SN54LVC06A, SN74LVC06A
HEX INVERTER BUFFERS/DRIVERS
WITH OPEN-DRAIN OUTPUTS
www.ti.com
SCAS596N – OCTOBER 1997 – REVISED JULY 2005
Recommended Operating Conditions
(1)
SN54LVC06A (2)
–55°C to 125°C
Operating
VCC
Supply voltage
VIH
High-level input voltage
Data retention only
MAX
1.65
3.6
1.5
VCC = 2.3 V to 2.7 V
1.7
VCC = 2.7 V to 3.6 V
2
V
0.35 × VCC
VCC = 1.65 V to 1.95 V
Low-level input voltage
V
0.65 × VCC
VCC = 1.65 V to 1.95 V
VIL
UNIT
MIN
VCC = 2.3 V to 2.7 V
0.7
VCC = 2.7 V to 3.6 V
0.8
V
VI
Input voltage
0
5.5
V
VO
Output voltage
0
5.5
V
VCC = 1.65 V
IOL
(1)
(2)
Low-level output current
4
VCC = 2.3 V
8
VCC = 2.7 V
12
VCC = 3 V
24
mA
All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report,
Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
Product preview
Recommended Operating Conditions (1)
SN74LVC06A
TA = 25°C
VCC
Supply voltage
VIH
High-level
input voltage
Operating
Data retention only
–40°C to 85°C
–40°C to 125°C
MAX
MIN
MAX
MIN
MAX
1.65
3.6
1.65
3.6
1.65
3.6
1.5
1.5
1.5
0.65 × VCC
0.65 × VCC
0.65 × VCC
VCC = 2.3 V to 2.7 V
1.7
1.7
1.7
VCC = 2.7 V to 3.6 V
2
VCC = 1.65 V to 1.95 V
UNIT
MIN
VCC = 1.65 V to 1.95 V
2
V
V
2
0.35 × VCC
0.35 × VCC
0.35 × VCC
0.7
0.7
0.7
VIL
Low-level
input voltage
VI
Input voltage
0
5.5
0
5.5
0
5.5
V
VO
Output voltage
0
5.5
0
5.5
0
5.5
V
VCC = 2.3 V to 2.7 V
VCC = 2.7 V to 3.6 V
VCC = 1.65 V
IOL
(1)
Low-level
output current
0.8
4
0.8
4
V
0.8
4
VCC = 2.3 V
8
8
8
VCC = 2.7 V
12
12
12
VCC = 3 V
24
24
24
mA
All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report,
Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
3
SN54LVC06A, SN74LVC06A
HEX INVERTER BUFFERS/DRIVERS
WITH OPEN-DRAIN OUTPUTS
www.ti.com
SCAS596N – OCTOBER 1997 – REVISED JULY 2005
Electrical Characteristics
over recommended operating free-air temperature range (unless otherwise noted)
SN54LVC06A (1)
PARAMETER
TEST CONDITIONS
VCC
–55°C to 125°C
UNIT
MIN TYP (2) MAX
IOL = 100 µA
VOL
II
ICC
∆ICC
Ci
(1)
(2)
1.65 V to 3.6 V
0.2
IOL = 4 mA
1.65 V
0.45
IOL = 8 mA
2.3 V
0.7
IOL = 12 mA
2.7 V
0.4
IOL = 24 mA
3V
0.55
±5
µA
3.6 V
10
µA
2.7 V to 3.6 V
500
µA
VI = 5.5 V or GND
3.6 V
VI = VCC or GND, IO = 0
One input at VCC – 0.6 V, Other inputs at VCC or GND
V
VI = VCC or GND
3.3 V
5
pF
Product preview
TA = 25°C
Electrical Characteristics
over recommended operating free-air temperature range (unless otherwise noted)
SN74LVC06A
PARAMETER
TEST CONDITIONS
VCC
TA = 25°C
MIN
IOL = 100 µA
VOL
MAX
–40°C to 125°C
MIN
IOL = 4 mA
1.65 V
0.24
0.45
0.6
IOL = 8 mA
2.3 V
0.3
0.7
0.75
IOL = 12 mA
2.7 V
0.4
0.4
0.6
3V
VI = 5.5 V or GND
ICC
VI = VCC or GND, IO = 0
One input at VCC – 0.6 V,
Other inputs at VCC or GND
VI = VCC or GND
UNIT
MAX
0.2
VI or VO = 5.5 V
Ci
MIN
0.1
Ioff
∆ICC
–40°C to 85°C
MAX
1.65 V to 3.6 V
IOL = 24 mA
II
TYP
0.3
V
0.55
0.55
0.8
3.6 V
±1
±5
±20
µA
0
±1
±10
±20
µA
3.6 V
1
10
40
µA
500
500
5000
µA
2.7 V to 3.6 V
3.3 V
5
pF
Switching Characteristics
over recommended operating free-air temperature range (unless otherwise noted) (see Figure 1)
SN54LVC06A (1)
PARAMETER
tpd
FROM
(INPUT)
A
TO
(OUTPUT)
Y
VCC
MIN
MAX
1.8 V ± 0.15 V
1.4
5.6
2.5 V ± 0.2 V
1
3.1
2.7 V
3.3 V ± 0.3 V
(1)
4
Product preview
–55°C to 125°C
3.9
1
3.7
UNIT
ns
SN54LVC06A, SN74LVC06A
HEX INVERTER BUFFERS/DRIVERS
WITH OPEN-DRAIN OUTPUTS
www.ti.com
SCAS596N – OCTOBER 1997 – REVISED JULY 2005
Switching Characteristics
over recommended operating free-air temperature range (unless otherwise noted) (see Figure 1)
SN74LVC06A
PARAMETER
FROM
(INPUT)
TO
(OUTPUT)
VCC
TA = 25°C
MIN
tpd
A
Y
–40°C to 85°C
TYP MAX
MIN MAX
–40°C to 125°C
MIN
MAX
1.8 V ± 0.15 V
1.4
3
5.1
1.4
5.6
1.4
7.6
2.5 V ± 0.2 V
1
1.9
2.8
1
3.1
1
4
2.7 V
1
2.4
3.7
1
3.9
1
5
3.3 V ± 0.3 V
1
2.2
3.5
1
3.7
1
5
UNIT
ns
Operating Characteristics
TA = 25°C
PARAMETER
Cpd
Power dissipation capacitance per buffer/driver
TEST
CONDITIONS
f = 10 MHz
VCC
TYP
1.8 V
2.1
2.5 V
2.3
3.3 V
2.5
UNIT
pF
5
SN54LVC06A, SN74LVC06A
HEX INVERTER BUFFERS/DRIVERS
WITH OPEN-DRAIN OUTPUTS
www.ti.com
SCAS596N – OCTOBER 1997 – REVISED JULY 2005
PARAMETER MEASUREMENT INFORMATION
(OPEN DRAIN)
VLOAD
S1
RL
From Output
Under Test
Open
TEST
GND
RL
CL
(see Note A)
S1
tPZL (see Notes E and F)
VLOAD
tPLZ (see Notes E and G)
VLOAD
tPHZ/tPZH
VLOAD
LOAD CIRCUIT
INPUT
VCC
VI
1.8 V ± 0.15 V
2.5 V ± 0.2 V
2.7 V
3.3 V ± 0.3 V
VM
tr/tf
≤ 2 ns
≤ 2 ns
≤ 2.5 ns
≤ 2.5 ns
VCC
VCC
2.7 V
2.7 V
VLOAD
VCC/2
VCC/2
1.5 V
1.5 V
2 × VCC
2 × VCC
6V
6V
CL
RL
V∆
30 pF
30 pF
50 pF
50 pF
1 kΩ
500 Ω
500 Ω
500 Ω
0.15 V
0.15 V
0.3 V
0.3 V
VI
Timing Input
VM
0V
tw
tsu
th
VI
VM
Input
VM
VM
Data Input
VM
0V
0V
VOLTAGE WAVEFORMS
SETUP AND HOLD TIMES
VOLTAGE WAVEFORMS
PULSE DURATION
VI
VM
Input
VM
0V
Output
VM
VOL
tPHL
VM
VOL
VOLTAGE WAVEFORMS
PROPAGATION DELAY TIMES
INVERTING AND NONINVERTING OUTPUTS
tPLZ
VLOAD/2
VM
tPZH
VOH
Output
VM
0V
Output
Waveform 1
S1 at VLOAD
(see Note B)
tPLH
VM
VM
tPZL
VOH
VM
VI
Output
Control
tPHL
tPLH
VI
Output
Waveform 2
S1 at VLOAD
(see Note B)
VOL + V∆
VOL
tPHZ
VM
VLOAD/2 - V∆
VLOAD/2
≈0 V
VOLTAGE WAVEFORMS
ENABLE AND DISABLE TIMES
LOW- AND HIGH-LEVEL ENABLING
NOTES: A. CL includes probe and jig capacitance.
B. Waveform 1 is for an output with internal conditions such that the output is low, except when disabled by the output control.
Waveform 2 is for an output with internal conditions such that the output is high, except when disabled by the output control.
C. All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω.
D. The outputs are measured one at a time, with one transition per measurement.
E. Since this device has open-drain outputs, tPLZ and tPZL are the same as tpd.
F. tPZL is measured at VM.
G. tPLZ is measured at VOL + V∆.
H. All parameters and waveforms are not applicable to all devices.
Figure 1. Load Circuit and Voltage Waveforms
6
PACKAGE OPTION ADDENDUM
www.ti.com
10-Dec-2020
PACKAGING INFORMATION
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
(2)
Lead finish/
Ball material
MSL Peak Temp
Op Temp (°C)
Device Marking
(3)
(4/5)
(6)
SN74LVC06AD
ACTIVE
SOIC
D
14
50
RoHS & Green
NIPDAU
Level-1-260C-UNLIM
-40 to 125
LVC06A
SN74LVC06ADBR
ACTIVE
SSOP
DB
14
2000
RoHS & Green
NIPDAU
Level-1-260C-UNLIM
-40 to 125
LC06A
SN74LVC06ADE4
ACTIVE
SOIC
D
14
50
RoHS & Green
NIPDAU
Level-1-260C-UNLIM
-40 to 125
LVC06A
SN74LVC06ADGVR
ACTIVE
TVSOP
DGV
14
2000
RoHS & Green
NIPDAU
Level-1-260C-UNLIM
-40 to 125
LC06A
SN74LVC06ADR
ACTIVE
SOIC
D
14
2500
RoHS & Green
NIPDAU
Level-1-260C-UNLIM
-40 to 125
LVC06A
SN74LVC06ADRE4
ACTIVE
SOIC
D
14
2500
RoHS & Green
NIPDAU
Level-1-260C-UNLIM
-40 to 125
LVC06A
SN74LVC06ADT
ACTIVE
SOIC
D
14
250
RoHS & Green
NIPDAU
Level-1-260C-UNLIM
-40 to 125
LVC06A
SN74LVC06ANSR
ACTIVE
SO
NS
14
2000
RoHS & Green
NIPDAU
Level-1-260C-UNLIM
-40 to 125
LVC06A
SN74LVC06APW
ACTIVE
TSSOP
PW
14
90
RoHS & Green
NIPDAU
Level-1-260C-UNLIM
-40 to 125
LC06A
SN74LVC06APWG4
ACTIVE
TSSOP
PW
14
90
RoHS & Green
NIPDAU
Level-1-260C-UNLIM
-40 to 125
LC06A
SN74LVC06APWR
ACTIVE
TSSOP
PW
14
2000
RoHS & Green
NIPDAU
Level-1-260C-UNLIM
-40 to 125
LC06A
SN74LVC06APWRE4
ACTIVE
TSSOP
PW
14
2000
RoHS & Green
NIPDAU
Level-1-260C-UNLIM
-40 to 125
LC06A
SN74LVC06APWRG4
ACTIVE
TSSOP
PW
14
2000
RoHS & Green
NIPDAU
Level-1-260C-UNLIM
-40 to 125
LC06A
SN74LVC06APWT
ACTIVE
TSSOP
PW
14
250
RoHS & Green
NIPDAU
Level-1-260C-UNLIM
-40 to 125
LC06A
SN74LVC06ARGYR
ACTIVE
VQFN
RGY
14
3000
RoHS & Green
NIPDAU
Level-2-260C-1 YEAR
-40 to 125
LC06A
SN74LVC06ARGYRG4
ACTIVE
VQFN
RGY
14
3000
RoHS & Green
NIPDAU
Level-2-260C-1 YEAR
-40 to 125
LC06A
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
Addendum-Page 1
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
10-Dec-2020
(2)
RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance
do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may
reference these types of products as "Pb-Free".
RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption.
Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of
很抱歉,暂时无法提供与“SN74LVC06ARGYRG4”相匹配的价格&库存,您可以联系我们找货
免费人工找货