SN74LVC1G17MDBVREP

SN74LVC1G17-EP www.ti.com SGLS336A – APRIL 2006 – REVISED JUNE 2007 SINGLE SCHMITT-TRIGGER BUFFER • FEATURES • • • • • • • • • • Controlled Baseline – One Assembly/Test Site, One Fabrication Site Extended Temperature Performance of –55°C to 125°C Enhanced Diminishing Manufacturing Sources (DMS) Support Qualification Pedigree(1) Supports 5-V VCC Operation Max tpd of 4.6 ns at 3.3 V Low Power Consumption, 10 μA Max ICC ±24 mA Output Drive at 3.3 V Ioff Supports Partial Power Down Mode Operation Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II ESD Protection Exceeds JESD 22 – 2000-V Human-Body Model (A114-A) – 200-V Machine Model (A115-A) – 1000-V Charged-Device Model (C101) (1) Component qualification in accordance with JEDEC and industry standards to ensure reliable operation over an extended temperature range. This includes, but is not limited to, Highly Accelerated Stress Test (HAST) or biased 85/85, temperature cycle, autoclave or unbiased HAST, electromigration, bond intermetallic life, and mold compound life. Such qualification testing should not be viewed as justifying use of this component beyond specified performance and environmental limits. DCK PACKAGE (TOP VIEW) NC 1 A 2 GND 3 DBV PACKAGE (TOP VIEW) 5 VCC 4 Y NC 1 A 2 GND 3 5 VCC 4 Y DESCRIPTION/ORDERING INFORMATION This single Schmitt-trigger buffer is designed for 1.65-V to 5.5-V VCC operation. The SN74LVC1G17 contains one buffer and performs the Boolean function Y = A. The device functions as an independent buffer, but because of Schmitt action, it may have different input threshold levels for positive-going (VT+) and negative-going (VT–) signals. NanoStar™ and NanoFree™ package technology is a major breakthrough in IC packaging concepts, using the die as the package. This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down. ORDERING INFORMATION (1) TA –55°C to 125°C (1) (2) PACKAGE (2) ORDERABLE PART NUMBER TOP-SIDE MARKING SOT (SC-70) - DCK Reel of 3000 SN74LVC1G17MDCKREP C70 SOP (SOT-23) - DBV Reel of 3000 SN74LVC1G17MDBVREP C170 For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI website at www.ti.com. Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. FUNCTION TABLE INPUT A OUTPUT Y H H L L Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. NanoStar, NanoFree are trademarks of Texas Instruments. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright © 2006–2007, Texas Instruments Incorporated SN74LVC1G17-EP www.ti.com SGLS336A – APRIL 2006 – REVISED JUNE 2007 LOGIC DIAGARAM (POSITIVE LOGIC) 2 A 4 Y ABSOLUTE MAXIMUM RATINGS over operating free-air temperature range (unless otherwise noted) VCC VI VO (1) VALUE UNIT Supply voltage range –0.5 to 6.5 V (2) –0.5 to 6.5 V –0.5 to 6.5 V –0.5 to VCC + 0.5 V Input voltage range Voltage range applied to any output in the high-impedance or power-off state Voltage range applied to any output in the high or low state (2) (3) IIK Input clamp current (VI < 0) –50 mA IOK Output clamp current (VO < 0) -50 mA IO Continuous output current ±50 mA Continuous current through VCC or GND ±100 mA θJA Package thermal impedance (4): DCK package 252 °C/W Tstg Storage temperature range –65 to 150 °C (1) (2) (3) (4) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. The input and output negative-voltage ratings may be exceeded if the input and output current ratings are observed. The value of VCC is provided in the recommended operating conditions table. The package thermal impedance is calculated in accordance with JESD 51-7. RECOMMENDED OPERATING CONDITIONS (1) Operating MAX MAX 1.65 5.5 VCC Supply voltage VI Input voltage 0 5.5 V VO Output voltage 0 VCC V Data retention only 1.5 VCC = 1.65 V IOH High –8 –16 VCC = 3 V Low-level output current –32 VCC = 1.65 V 4 VCC = 2.3 V 8 16 VCC = 3 V (1) Operating free-air temperature 32 –55 125 All unused inputs of the device must be held at VCC or GND to ensure proper device operation. See the TI application report, Implications of Slow or Floating CMOS Inputs (SCBA004). Submit Documentation Feedback mA 24 VCC = 4.5 V TA mA –24 VCC = 4.5 V IOL V –4 VCC = 2.3 V 2 UNIT °C SN74LVC1G17-EP www.ti.com SGLS336A – APRIL 2006 – REVISED JUNE 2007 ELECTRICAL CHARACTERISTICS over operating free-air temperature range (unless otherwise noted) PARAMETER MIN TYP (1) MAX 1.65 V to 4.5 V 0.76 1.13 2.3 V 1.08 1.56 TEST CONDITIONS VCC Positive-going input threshold voltage VT+ 3V 1.48 1.92 4.5 V 2.19 2.74 5.5 V 2.65 3.33 1.65 V to 4.5 V 0.35 0.59 2.3 V 0.56 0.88 3V 0.89 1.2 4.5 V 1.51 1.97 5.5 V 1.88 2.4 1.65 V to 4.5 V 0.36 0.64 2.3 V 0.45 0.78 Negative-going input threshold voltage VT– &Delt a;VT IOH = –100 mA VOH 5.5 V 0.69 1.04 1.2 2.3 V 1.9 3V IOL = 100 mA 1.65 V to 4.5 V 0.1 IOL = 4 mA 1.65 V 0.45 IOL = 8 mA 2.3 V 0.3 3.8 0.4 3V VI or VO = 5.5 V ICC VI = 5.5 V or GND, IO = 0 ΔICC One input at VCC – 0.6 V, Other inputs at VCC or GND Ci VI = VCC or GND V 0.55 4.5 V Ioff V 2.3 4.5 V VI = 5.5 or GND V V 2.4 IOH = –32 mA IOL = 32 mA V VCC – 0.1 IOH = –8 mA IOL = 24 mA (1) 0.93 1.65 V IOL = 16 mA A input 0.83 0.58 1.65 V to 4.5 V IOH = –24 mA II 0.51 IOH = -4 mA IOH = –16 mA VOL 3V 4.5 V UNIT 0.55 0 to 5.5 V ±5 μA 0 ±10 μA 1.65 V to 5.5 V 10 μA 3 V to 5.5 V 500 μA 3.3 V 4.5 pF All typical values are at VCC = 3.3 V, TA = 25°C. Submit Documentation Feedback 3 SN74LVC1G17-EP www.ti.com SGLS336A – APRIL 2006 – REVISED JUNE 2007 SWITCHING CHARACTERISTICS over recommended operating free-air temperature range, CL = 15 pF (unless otherwise noted) (see Figure 1) PARAMETER FROM (INPUT) TO (OUTPUT) A Y tpd VCC = 1.8 V ±0.15 V VCC = 2.5 V ±0.2 V VCC = 3.3 V ±0.3 V VCC = 5 V ±0.5 V UNIT MIN MAX MIN MAX MIN MAX MIN MAX 2.8 9.9 1.6 5.5 1.5 4.6 0.9 4.4 ns SWITCHING CHARACTERISTICS over recommended operating free-air temperature range, CL = 30 pF or 50 pF (unless otherwise noted) (see Figure 2) PARAMETER FROM (INPUT) TO (OUTPUT) A Y tpd VCC = 1.8 V ±0.15 V VCC = 2.5 V ±0.2 V VCC = 3.3 V ±0.3 V VCC = 5 V ±0.5 V UNIT MIN MAX MIN MAX MIN MAX MIN MAX 3.8 11 2 6.5 1.8 5.5 1.2 5 ns OPERATING CHARACTERISTICS, TA = 25°C PARAMETER Cpd Power dissipaton capacitance 4 TEST CONDITIONS f = 10 MHz VCC = 1.8 V VCC = 2.5 V VCC = 3.3 V VCC = 5 V TYP TYP TYP TYP 20 21 22 26 Submit Documentation Feedback UNIT SN74LVC1G17-EP www.ti.com SGLS336A – APRIL 2006 – REVISED JUNE 2007 PARAMETER MEASUREMENT INFORMATION VLOAD S1 RL From Output Under Test CL (see Note A) Open GND RL TEST S1 tPLH/tPHL tPLZ/tPZL tPHZ/tPZH Open VLOAD GND LOAD CIRCUIT INPUTS VCC 1.8 V ± 0.15 V 2.5 V ± 0.2 V 3.3 V ± 0.3 V 5 V ± 0.5 V VI tr/tf VCC VCC 3V VCC ≤2 ns ≤2 ns ≤2.5 ns ≤2.5 ns VM VLOAD CL RL V∆ VCC/2 VCC/2 1.5 V VCC/2 2 × VCC 2 × VCC 6V 2 × VCC 15 pF 15 pF 15 pF 15 pF 1 MΩ 1 MΩ 1 MΩ 1 MΩ 0.15 V 0.15 V 0.3 V 0.3 V VI Timing Input VM 0V tw tsu VI Input VM VM th VI Data Input VM VM 0V 0V VOLTAGE WAVEFORMS PULSE DURATION VOLTAGE WAVEFORMS SETUP AND HOLD TIMES VI VM Input VM 0V tPLH VM VM VOL tPHL VM VM 0V Output Waveform 1 S1 at VLOAD (see Note B) tPLH tPLZ VLOAD/2 VM tPZH VOH Output VM tPZL tPHL VOH Output VI Output Control VM VOL Output Waveform 2 S1 at GND (see Note B) VOLTAGE WAVEFORMS PROPAGATION DELAY TIMES INVERTING AND NONINVERTING OUTPUTS VOL + V∆ VOL tPHZ VM VOH − V∆ VOH ≈0 V VOLTAGE WAVEFORMS ENABLE AND DISABLE TIMES LOW- AND HIGH-LEVEL ENABLING NOTES: A. CL includes probe and jig capacitance. B. Waveform 1 is for an output with internal conditions such that the output is low, except when disabled by the output control. Waveform 2 is for an output with internal conditions such that the output is high, except when disabled by the output control. C. All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω. D. The outputs are measured one at a time, with one transition per measurement. E. tPLZ and tPHZ are the same as tdis. F. tPZL and tPZH are the same as ten. G. tPLH and tPHL are the same as tpd. H. All parameters and waveforms are not applicable to all devices. Figure 1. Load Circuit and Voltage Waveforms Submit Documentation Feedback 5 SN74LVC1G17-EP www.ti.com SGLS336A – APRIL 2006 – REVISED JUNE 2007 PARAMETER MEASUREMENT INFORMATION (continued) VLOAD S1 RL From Output Under Test CL (see Note A) Open GND RL TEST S1 tPLH/tPHL tPLZ/tPZL tPHZ/tPZH Open VLOAD GND LOAD CIRCUIT INPUTS VCC 1.8 V ± 0.15 V 2.5 V ± 0.2 V 3.3 V ± 0.3 V 5 V ± 0.5 V VI tr/tf VCC VCC 3V VCC ≤2 ns ≤2 ns ≤2.5 ns ≤2.5 ns VM VLOAD CL RL V∆ VCC/2 VCC/2 1.5 V VCC/2 2 × VCC 2 × VCC 6V 2 × VCC 30 pF 30 pF 50 pF 50 pF 1 kΩ 500 Ω 500 Ω 500 Ω 0.15 V 0.15 V 0.3 V 0.3 V VI Timing Input VM 0V tw tsu VI Input VM VM th VI Data Input VM VM 0V 0V VOLTAGE WAVEFORMS PULSE DURATION VOLTAGE WAVEFORMS SETUP AND HOLD TIMES VI VM Input VM 0V tPLH VOH Output VM VOL tPHL VM VM 0V Output Waveform 1 S1 at VLOAD (see Note B) tPLH tPLZ VLOAD/2 VM tPZH VOH Output VM tPZL tPHL VM VI Output Control VM VOL Output Waveform 2 S1 at GND (see Note B) VOLTAGE WAVEFORMS PROPAGATION DELAY TIMES INVERTING AND NONINVERTING OUTPUTS VOL + V∆ VOL tPHZ VM VOH − V∆ VOH ≈0 V VOLTAGE WAVEFORMS ENABLE AND DISABLE TIMES LOW- AND HIGH-LEVEL ENABLING NOTES: A. CL includes probe and jig capacitance. B. Waveform 1 is for an output with internal conditions such that the output is low, except when disabled by the output control. Waveform 2 is for an output with internal conditions such that the output is high, except when disabled by the output control. C. All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω. D. The outputs are measured one at a time, with one transition per measurement. E. tPLZ and tPHZ are the same as tdis. F. tPZL and tPZH are the same as ten. G. tPLH and tPHL are the same as tpd. H. All parameters and waveforms are not applicable to all devices. Figure 2. Load Circuit and Voltage Waveforms 6 Submit Documentation Feedback PACKAGE OPTION ADDENDUM www.ti.com 10-Dec-2020 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan (2) Lead finish/ Ball material MSL Peak Temp Op Temp (°C) Device Marking (3) (4/5) (6) SN74LVC1G17MDBVREP ACTIVE SOT-23 DBV 5 3000 RoHS & Green NIPDAU Level-1-260C-UNLIM -55 to 125 C170 SN74LVC1G17MDCKREP ACTIVE SC70 DCK 5 3000 RoHS & Green NIPDAU Level-1-260C-UNLIM -55 to 125 C70 V62/06621-01XE ACTIVE SOT-23 DBV 5 3000 RoHS & Green NIPDAU Level-1-260C-UNLIM -55 to 125 C170 V62/06621-01YE ACTIVE SC70 DCK 5 3000 RoHS & Green NIPDAU Level-1-260C-UNLIM -55 to 125 C70 (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of