Product
Folder
Sample &
Buy
Support &
Community
Tools &
Software
Technical
Documents
SN74LVC3G17
SCES470F – AUGUST 2003 – REVISED AUGUST 2015
SN74LVC3G17 Triple Schmitt-Trigger Buffer
1 Features
3 Description
•
This triple Schmitt-trigger buffer is designed for
1.65-V to 5.5-V VCC operation.
1
•
•
•
•
•
•
•
•
•
•
Available in the Texas Instruments
NanoFree™ Package
Supports 5-V VCC Operation
Inputs Accept Voltages to 5.5 V
Maximum tpd of 5.4 ns at 3.3 V
Low Power Consumption, 10-μA Maximum ICC
±24-mA Output Drive at 3.3 V
Typical VOLP (Output Ground Bounce)
2 V at VCC = 3.3 V, TA = 25°C
Ioff Supports Live Insertion, Partial-Power-Down
Mode and Back Drive Protection
Latch-Up Performance Exceeds 100 mA
Per JESD 78, Class II
ESD Protection Exceeds JESD 22
– 2000-V Human Body Model (A114-A)
– 200-V Machine Model (A115-A)
– 1000-V Charged-Device Model (C101)
•
•
•
•
•
This device is fully specified for partial-power-down
applications using Ioff. The Ioff circuitry disables the
outputs, preventing damaging current backflow
through the device when it is powered down.
NanoFree package technology is a major
breakthrough in IC packaging concepts, using the die
as the package.
Device Information(1)
PART NUMBER
SN74LVC3G17DCT
PACKAGE
SSOP (8)
BODY SIZE (NOM)
2.95 mm × 2.80 mm
SN74LVC3G17DCU VSSOP (8)
2.30 mm × 2.00 mm
SN74LVC3G17YZP
1.91 mm × 0.91 mm
DSBGA (8)
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
2 Applications
•
•
•
•
•
•
The SN74LVC3G17 device contains three buffers
and performs the Boolean function Y = A. The device
functions as three independent buffers but, because
of Schmitt action, it may have different input threshold
levels for positive-going (VT+) and negative-going
(VT–) signals.
AV Receivers
Audio Docks: Portable
Blu-ray® Players and Home Theater
MP3 Players/Recorders
Personal Digital Assistants (PDAs)
Power: Telecom/Server AC/DC Supply: Single
Controller: Analog and Digital
Solid State Drives (SSDs): Client and Enterprise
TVs: LCD/Digital and High-Definition (HDTVs)
Tablets: Enterprise
Video Analytics: Server
Wireless Headsets, Keyboards, and Mice
Simplified Schematic
1
7
1A
1Y
3
5
2A
2Y
6
3A
2
3Y
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.
SN74LVC3G17
SCES470F – AUGUST 2003 – REVISED AUGUST 2015
www.ti.com
Table of Contents
1
2
3
4
5
6
7
8
Features ..................................................................
Applications ...........................................................
Description .............................................................
Revision History.....................................................
Pin Configuration and Functions .........................
Specifications.........................................................
1
1
1
2
3
4
6.1
6.2
6.3
6.4
6.5
6.6
6.7
6.8
4
4
4
5
5
6
6
6
Absolute Maximum Ratings .....................................
ESD Ratings..............................................................
Recommended Operating Conditions ......................
Thermal Information ..................................................
Electrical Characteristics...........................................
Switching Characteristics ..........................................
Operating Characteristics..........................................
Typical Characteristics ..............................................
Parameter Measurement Information .................. 7
Detailed Description .............................................. 9
8.1 Overview ................................................................... 9
8.2 Functional Block Diagram ......................................... 9
8.3 Feature Description................................................... 9
8.4 Device Functional Modes.......................................... 9
9
Application and Implementation ........................ 10
9.1 Application Information .......................................... 10
9.2 Typical Application .................................................. 10
10 Power Supply Recommendations ..................... 11
11 Layout................................................................... 11
11.1 Layout Guidelines ................................................. 11
11.2 Layout Example .................................................... 12
12 Device and Documentation Support ................. 13
12.1
12.2
12.3
12.4
12.5
Documentation Support ........................................
Community Resources..........................................
Trademarks ...........................................................
Electrostatic Discharge Caution ............................
Glossary ................................................................
13
13
13
13
13
13 Mechanical, Packaging, and Orderable
Information ........................................................... 13
4 Revision History
NOTE: Page numbers for previous revisions may differ from page numbers in the current version.
Changes from Revision E (November 2013) to Revision F
Page
•
Added the Device Information table, ESD Ratings table, Feature Description section, Device Functional Modes,
Application and Implementation section, Power Supply Recommendations section, Layout section, Device and
Documentation Support section, and Mechanical, Packaging, and Orderable Information section....................................... 1
•
Moved Tstg to Absolute Maximum Ratings table..................................................................................................................... 4
Changes from Revision D (Feburary 2007) to Revision E
Page
•
Updated document to new TI data sheet format. ................................................................................................................... 1
•
Updated operating temperature range. .................................................................................................................................. 4
2
Submit Documentation Feedback
Copyright © 2003–2015, Texas Instruments Incorporated
Product Folder Links: SN74LVC3G17
SN74LVC3G17
www.ti.com
SCES470F – AUGUST 2003 – REVISED AUGUST 2015
5 Pin Configuration and Functions
DCT Package
8-Pin SSOP
Top View
1A
DCU Package
8-Pin VSSOP
Top View
VCC
8
1
3Y
2
7
1Y
2A
3
6
3A
GND
4
5
2Y
1A
3Y
2A
GND
1
8
VCC
2
7
1Y
3A
2Y
3
6
4
5
YZP Package
8-Pin DSBGA
Bottom View
GND
2A
3Y
1A
4 5
3 6
2 7
1 8
2Y
3A
1Y
VCC
See mechanical drawing for dimensions.
Pin Functions
PIN
NAME
NO.
TYPE
DESCRIPTION
1A
1
I
Input 1
1Y
7
O
Output 1
2A
3
I
Input 2
2Y
5
O
Output 2
3A
6
I
Input 3
3Y
2
O
Output 3
GND
4
—
Ground
VCC
8
—
Power Pin
Submit Documentation Feedback
Copyright © 2003–2015, Texas Instruments Incorporated
Product Folder Links: SN74LVC3G17
3
SN74LVC3G17
SCES470F – AUGUST 2003 – REVISED AUGUST 2015
www.ti.com
6 Specifications
6.1 Absolute Maximum Ratings
over operating free-air temperature range (unless otherwise noted) (1)
VCC
MIN
MAX
UNIT
Supply voltage
–0.5
6.5
V
(2)
VI
Input voltage
–0.5
6.5
V
VO
Voltage applied to any output in the high-impedance or power-off state (2)
–0.5
6.5
V
VO
Output voltage (2) (3)
–0.5
VCC + 0.5
V
IIK
Input clamp current
VI < 0
–50
mA
IOK
Output clamp current
VO < 0
–50
mA
IO
Continuous output current
±50
mA
±100
mA
150
°C
Continuous current through VCC or GND
Tstg
(1)
(2)
(3)
Storage temperature
–65
Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating
Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
The input negative-voltage and output voltage ratings may be exceeded if the input and output current ratings are observed.
The value of VCC is provided in the Recommended Operating Conditions table.
6.2 ESD Ratings
VALUE
Electrostatic
discharge
VESD
(1)
(2)
Human Body Model (HBM), per ANSI/ESDA/JEDEC JS-001, all pins (1)
+2000
Charged-Device Model (CDM), per JEDEC specification JESD22-C101, all pins (2)
+1000
UNIT
V
JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.
JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.
6.3 Recommended Operating Conditions
See
(1)
.
VCC
Supply voltage
VI
Input voltage
VO
Output voltage
IOH
High-level output current
Operating
MIN
MAX
1.65
5.5
V
0
5.5
V
0
VCC
V
VCC = 1.65 V
–4
VCC = 2.3 V
–8
–16
VCC = 3 V
–32
VCC = 1.65 V
4
VCC = 2.3 V
Low-level output current
8
16
VCC = 3 V
(1)
4
Operating free-air temperature
mA
24
VCC = 4.5 V
TA
mA
–24
VCC = 4.5 V
IOL
UNIT
32
–40
125
°C
All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report,
Implications of Slow or Floating CMOS Inputs, SCBA004.
Submit Documentation Feedback
Copyright © 2003–2015, Texas Instruments Incorporated
Product Folder Links: SN74LVC3G17
SN74LVC3G17
www.ti.com
SCES470F – AUGUST 2003 – REVISED AUGUST 2015
6.4 Thermal Information
SNLVC3G17
THERMAL METRIC (1)
RθJA
(1)
DCT (SSOP)
Junction-to-ambient thermal resistance (2)
DCU (VSSOP) YZP (DSBGA)
6 PINS
6 PINS
6 PINS
220
227
102
UNIT
°C/W
For more information about traditional and new thermal metrics, see the Semiconductor and IC Package Thermal Metrics application
report, SPRA953.
The package thermal impedance is calculated in accordance with JESD 51-7.
(2)
6.5 Electrical Characteristics
over recommended operating free-air temperature range (unless otherwise noted)
PARAMETER
TEST CONDITIONS
VCC
VT+
Positive-going
input threshold
voltage
VT–
Negative-going
input threshold
voltage
ΔVT
Hysteresis
VT+ – VT–
VOH
MIN
MAX
1.16
0.79
1.16
1.11
1.56
1.11
1.56
3V
1.5
1.87
1.5
1.87
4.5 V
2.16
2.74
2.16
2.74
5.5 V
2.61
3.33
2.61
3.33
1.65 V
0.39
0.62
0.39
0.62
2.3 V
0.58
0.87
0.58
0.87
3V
0.84
1.14
0.84
1.14
4.5 V
1.41
1.79
1.41
1.79
5.5 V
1.87
2.29
1.87
2.29
1.65 V
0.37
0.62
0.37
0.62
2.3 V
0.48
0.77
0.48
0.77
3V
0.56
0.87
0.56
0.87
4.5 V
0.71
1.04
0.71
1.04
0.71
1.11
0.71
1.11
VCC – 0.1
VCC – 0.1
1.65 V
1.2
1.2
IOH = –8 mA
2.3 V
1.9
1.9
2.4
2.4
2.3
2.3
IOH = –16 mA
TYP (1)
0.79
IOH = –4 mA
3V
4.5 V
IOL = 100 μA
1.65 V to 5.5 V
0.1
0.1
IOL = 4 mA
1.65 V
0.45
0.45
IOL = 8 mA
2.3 V
0.3
0.3
0.4
0.4
0.55
0.75
0.55
0.75
IOL = 16 mA
VI = 5.5 V or GND
Ioff
VI or VO = 5.5 V
ICC
VI = 5.5 V or GND, IO = 0
ΔICC
One input at VCC – 0.6 V,
Other inputs at VCC or GND
CI
VI = VCC or GND
V
V
V
3.8
3V
IOL = 32 mA
II
3.8
UNIT
V
IOH = –32 mA
IOL = 24 mA
(1)
–40°C to 125°C
MAX
2.3 V
1.65 V to 5.5 V
IOH = –24 mA
VOL
TYP (1)
1.65 V
5.5 V
IOH = –100 μA
–40°C to 85°C
MIN
4.5 V
V
0 to 5.5 V
±1
±5
μA
0
±5
±10
μA
1.65 V to 5.5 V
10
10
μA
3 V to 5.5 V
500
500
μA
3.3 V
4
pF
All typical values are at VCC = 3.3 V, TA = 25°C.
Submit Documentation Feedback
Copyright © 2003–2015, Texas Instruments Incorporated
Product Folder Links: SN74LVC3G17
5
SN74LVC3G17
SCES470F – AUGUST 2003 – REVISED AUGUST 2015
www.ti.com
6.6 Switching Characteristics
over recommended operating free-air temperature range, CL = 30 pF or 50 pF (unless otherwise noted)
–40°C to 85°C
PARAMETER
tpd
FROM
(INPUT)
TO
(OUTPUT)
A
TEST CONDITIONS
Y
VCC = 1.8 V
± 0.15 V
VCC = 2.5 V
± 0.2 V
VCC = 3.3 V
± 0.3 V
VCC = 5 V
± 0.5 V
MIN
MAX
MIN
MAX
MIN
MAX
MIN
MAX
See Figure 3
4.3
9.2
2
6.2
1.2
5.4
1
4.1
See Figure 3
4.3
10.2
2
7.2
1.2
6.4
1
5.1
UNIT
ns
6.7 Operating Characteristics
TA = 25°C
PARAMETER
Cpd
TEST CONDITIONS
Power dissipation capacitance
VCC = 1.8 V
f = 10 MHz
VCC = 2.5 V
VCC = 3.3 V
VCC = 5 V
TYP
TYP
TYP
TYP
18
19
19
22
UNIT
pF
6.8 Typical Characteristics
Max tpd (ns)
10.00
5.00
tpd from A to Y
CL= 30 pF or 50 pF
-ðìÙ}íîñÙ
0.00
0.00
1.00
2.00
3.00
4.00
Voltage (V)
5.00
6.00
C001
Figure 1. Maximum Propagation vs Delay VCC Voltage
6
Submit Documentation Feedback
Copyright © 2003–2015, Texas Instruments Incorporated
Product Folder Links: SN74LVC3G17
SN74LVC3G17
www.ti.com
SCES470F – AUGUST 2003 – REVISED AUGUST 2015
7 Parameter Measurement Information
VLOAD
S1
RL
From Output
Under Test
Open
TEST
GND
CL
(see Note A)
S1
Open
VLOAD
tPLH/tPHL
tPLZ/tPZL
tPHZ/tPZH
RL
GND
LOAD CIRCUIT
INPUTS
VCC
1.8 V ± 0.15 V
2.5 V ± 0.2 V
3.3 V ± 0.3 V
5 V ± 0.5 V
VI
tr/tf
VCC
VCC
3V
VCC
£2 ns
£2 ns
£2.5 ns
£2.5 ns
VM
VLOAD
CL
RL
VD
VCC/2
VCC/2
1.5 V
VCC/2
2 × VCC
2 × VCC
6V
2 × VCC
15 pF
15 pF
15 pF
15 pF
1 MW
1 MW
1 MW
1 MW
0.15 V
0.15 V
0.3 V
0.3 V
VI
Timing Input
VM
0V
tW
tsu
VI
Input
VM
VM
th
VI
Data Input
VM
VM
0V
0V
VOLTAGE WAVEFORMS
PULSE DURATION
VOLTAGE WAVEFORMS
SETUP AND HOLD TIMES
VI
VM
Input
VM
0V
tPLH
VOH
Output
VM
VOL
tPHL
VM
VM
0V
tPLZ
Output
Waveform 1
S1 at VLOAD
(see Note B)
tPLH
VLOAD/2
VM
tPZH
VOH
Output
VM
tPZL
tPHL
VM
VI
Output
Control
VM
VOL
VOLTAGE WAVEFORMS
PROPAGATION DELAY TIMES
INVERTING AND NONINVERTING OUTPUTS
Output
Waveform 2
S1 at GND
(see Note B)
VOL + VD
VOL
tPHZ
VM
VOH – VD
VOH
»0 V
VOLTAGE WAVEFORMS
ENABLE AND DISABLE TIMES
LOW- AND HIGH-LEVEL ENABLING
NOTES: A. CL includes probe and jig capacitance.
B. Waveform 1 is for an output with internal conditions such that the output is low, except when disabled by the output control.
Waveform 2 is for an output with internal conditions such that the output is high, except when disabled by the output control.
C. All input pulses are supplied by generators having the following characteristics: PRR £ 10 MHz, ZO = 50 W.
D. The outputs are measured one at a time, with one transition per measurement.
E. tPLZ and tPHZ are the same as tdis.
F. tPZL and tPZH are the same as ten.
G. tPLH and tPHL are the same as tpd.
H. All parameters and waveforms are not applicable to all devices.
Figure 2. Load Circuit and Voltage Waveforms
Submit Documentation Feedback
Copyright © 2003–2015, Texas Instruments Incorporated
Product Folder Links: SN74LVC3G17
7
SN74LVC3G17
SCES470F – AUGUST 2003 – REVISED AUGUST 2015
www.ti.com
Parameter Measurement Information (continued)
VLOAD
S1
RL
From Output
Under Test
Open
TEST
GND
CL
(see Note A)
S1
Open
VLOAD
tPLH/tPHL
tPLZ/tPZL
tPHZ/tPZH
RL
GND
LOAD CIRCUIT
INPUTS
VCC
1.8 V ± 0.15 V
2.5 V ± 0.2 V
3.3 V ± 0.3 V
5 V ± 0.5 V
VI
tr/tf
VCC
VCC
3V
VCC
£2 ns
£2 ns
£2.5 ns
£2.5 ns
VM
VLOAD
CL
RL
VD
VCC/2
VCC/2
1.5 V
VCC/2
2 × VCC
2 × VCC
6V
2 × VCC
30 pF
30 pF
50 pF
50 pF
1 kW
500 W
500 W
500 W
0.15 V
0.15 V
0.3 V
0.3 V
VI
Timing Input
VM
0V
tW
tsu
VI
Input
VM
VM
th
VI
Data Input
VM
VM
0V
0V
VOLTAGE WAVEFORMS
PULSE DURATION
VOLTAGE WAVEFORMS
SETUP AND HOLD TIMES
VI
VM
Input
VM
0V
tPLH
VOH
Output
VM
VOL
tPHL
VM
VM
0V
Output
Waveform 1
S1 at VLOAD
(see Note B)
tPLH
tPLZ
VLOAD/2
VM
tPZH
VOH
Output
VM
tPZL
tPHL
VM
VI
Output
Control
VM
VOL
VOLTAGE WAVEFORMS
PROPAGATION DELAY TIMES
INVERTING AND NONINVERTING OUTPUTS
Output
Waveform 2
S1 at GND
(see Note B)
VOL + VD
VOL
tPHZ
VM
VOH – VD
VOH
»0 V
VOLTAGE WAVEFORMS
ENABLE AND DISABLE TIMES
LOW- AND HIGH-LEVEL ENABLING
NOTES: A. CL includes probe and jig capacitance.
B. Waveform 1 is for an output with internal conditions such that the output is low, except when disabled by the output control.
Waveform 2 is for an output with internal conditions such that the output is high, except when disabled by the output control.
C. All input pulses are supplied by generators having the following characteristics: PRR £ 10 MHz, ZO = 50 W.
D. The outputs are measured one at a time, with one transition per measurement.
E. tPLZ and tPHZ are the same as tdis.
F. tPZL and tPZH are the same as ten.
G. tPLH and tPHL are the same as tpd.
H. All parameters and waveforms are not applicable to all devices.
Figure 3. Load Circuit and Voltage Waveforms
8
Submit Documentation Feedback
Copyright © 2003–2015, Texas Instruments Incorporated
Product Folder Links: SN74LVC3G17
SN74LVC3G17
www.ti.com
SCES470F – AUGUST 2003 – REVISED AUGUST 2015
8 Detailed Description
8.1 Overview
This triple Schmitt-trigger buffer is designed for 1.65-V to 5.5-V VCC operation. The SN74LVC3G17 device
contains three buffers and performs the Boolean function Y = A. The device functions as three independent
buffers but, because of Schmitt action, it may have different input threshold levels for positive-going (VT+) and
negative-going (VT–) signals. This device is fully specified for partial-power-down applications using Ioff. The Ioff
circuitry disables the outputs, preventing damaging current backflow through the device when it is powered
down. NanoFree™ package technology is a major breakthrough in IC packaging concepts, using the die as the
package.
8.2 Functional Block Diagram
1
7
1A
1Y
3
5
2A
2Y
6
2
3A
3Y
8.3 Feature Description
SN74LVC3G17 is available in NanoFree package. NanoFree is a major breakthrough in IC packaging concepts,
it is a bare die package developed for applications that require the smallest possible package. The device
supports 5-V VCC Operation. All Inputs accept voltages up to 5.5 V. ±24-mA Output Drive at 3.3 V. The maximum
time propagation delay (tpd ) is 5.4 ns at 3.3 V. Low Power Consumption, 10-μA Max ICC. Typical output ground
bounce (VOLP ) and Output VOH Undershoot (VOHV). This device is fully specified for partial-powerdown
applications using Ioff. The Ioff feature ensures that damaging current will not backflow through the device when it
is powered down. The SN74LVC3G17 device has isolation during power off. Ioff supports live insertion, partialpower-down mode and back drive protection. The device is latch-up resistant with 100 mA exceeding the JESD
78 standard, class II, providing protection from destruction due to latch-up. This device is protected against
electrostatic discharge. It is tested per JESD 22 using 2000-V human-body model (A114-B), 200-V machine
model (A115-A), and 1000-V charged-device model (C101).
8.4 Device Functional Modes
Table 1 lists the functional modes of the SN74LVC3G17.
Table 1. Function Table
INPUT
A
OUTPUT
Y
H
H
L
L
Submit Documentation Feedback
Copyright © 2003–2015, Texas Instruments Incorporated
Product Folder Links: SN74LVC3G17
9
SN74LVC3G17
SCES470F – AUGUST 2003 – REVISED AUGUST 2015
www.ti.com
9 Application and Implementation
NOTE
Information in the following applications sections is not part of the TI component
specification, and TI does not warrant its accuracy or completeness. TI’s customers are
responsible for determining suitability of components for their purposes. Customers should
validate and test their design implementation to confirm system functionality.
9.1 Application Information
The SN74LVC3G17 device contains three buffers and performs the Boolean function Y = A. The device functions
as three independent buffers, but because of Schmitt action, it may have different input threshold levels for
positive-going (VT+) and negative-going (VT–) signals. In this application, the engineer chooses to use just a
single Schmitt Trigger buffer. In this case, the other two inputs should be tied to VCC or GND.
9.2 Typical Application
3
Device
Figure 4. Device Power Button Circuit
9.2.1 Design Requirements
This device uses CMOS technology and has balanced output drive. Care should be taken to avoid bus
contention because it can drive currents that would exceed maximum limits. Outputs can be combined to
produce higher drive but the high drive will also create faster edges into light loads so routing and load conditions
should be considered to prevent ringing.
9.2.2 Detailed Design Procedure
1. Recommended Input Conditions:
– For specified high and low levels, see (VIH and VIL) in Recommended Operating Conditions table.
– Inputs are overvoltage tolerant allowing them to go as high as 5.5 V at any valid VCC.
2. Recommend Output Conditions:
– Load currents should not exceed 50 mA per output and 100 mA total for the part.
– Series resistors on the output may be used if the user desires to slow the output edge signal or limit the
output current.
10
Submit Documentation Feedback
Copyright © 2003–2015, Texas Instruments Incorporated
Product Folder Links: SN74LVC3G17
SN74LVC3G17
www.ti.com
SCES470F – AUGUST 2003 – REVISED AUGUST 2015
Typical Application (continued)
9.2.3 Application Curves
60
40
100
TA = 25°C, VCC = 3 V,
VIH = 3 V, VIL = 0 V,
All Outputs Switching
80
TA = 25°C, VCC = 3 V,
VIH = 3 V, VIL = 0 V,
All Outputs Switching
20
I OL – mA
I OH – mA
60
0
–20
–40
40
20
–60
0
–80
–100
–1
–0.5 0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
–20
–0.2
0.0
VOH – V
Figure 5. Output Current Drive
vs HIGH-level Output Voltage
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
VOL – V
Figure 6. Output Current Drive
vs LOW-level Output Voltage
10 Power Supply Recommendations
The power supply can be any voltage between the minimum and maximum supply voltage rating located in the
Absolute Maximum Ratings table.
Each VCC terminal should have a good bypass capacitor to prevent power disturbance. For devices with a single
supply, a 0.1-μF capacitor is recommended. If there are multiple VCC terminals then 0.01-μF or 0.022-μF
capacitors are recommended for each power terminal. It is ok to parallel multiple bypass capacitors to reject
different frequencies of noise. Multiple bypass capacitors may be paralleled to reject different frequencies of
noise. The bypass capacitor should be installed as close to the power terminal as possible for the best results.
11 Layout
11.1 Layout Guidelines
When using multiple bit logic devices, inputs should not float. In many cases, functions or parts of functions of
digital logic devices are unused. Some examples are when only two inputs of a triple-input AND gate are used,
or when only 3 of the 4-buffer gates are used. Such input pins should not be left unconnected because the
undefined voltages at the outside connections result in undefined operational states.
Specified in Figure 7 are rules that must be observed under all circumstances. All unused inputs of digital logic
devices must be connected to a high or low bias to prevent them from floating. The logic level that should be
applied to any particular unused input depends on the function of the device. Generally they will be tied to GND
or VCC, whichever makes more sense or is more convenient.
Submit Documentation Feedback
Copyright © 2003–2015, Texas Instruments Incorporated
Product Folder Links: SN74LVC3G17
11
SN74LVC3G17
SCES470F – AUGUST 2003 – REVISED AUGUST 2015
www.ti.com
11.2 Layout Example
VCC
Unused Input
Input
Output
Unused Input
Output
Input
Figure 7. Layout Diagram
12
Submit Documentation Feedback
Copyright © 2003–2015, Texas Instruments Incorporated
Product Folder Links: SN74LVC3G17
SN74LVC3G17
www.ti.com
SCES470F – AUGUST 2003 – REVISED AUGUST 2015
12 Device and Documentation Support
12.1 Documentation Support
12.1.1 Related Documentation
For related documentation, see the following:
Implications of Slow or Floating CMOS Inputs, SCBA004
12.2 Community Resources
The following links connect to TI community resources. Linked contents are provided "AS IS" by the respective
contributors. They do not constitute TI specifications and do not necessarily reflect TI's views; see TI's Terms of
Use.
TI E2E™ Online Community TI's Engineer-to-Engineer (E2E) Community. Created to foster collaboration
among engineers. At e2e.ti.com, you can ask questions, share knowledge, explore ideas and help
solve problems with fellow engineers.
Design Support TI's Design Support Quickly find helpful E2E forums along with design support tools and
contact information for technical support.
12.3 Trademarks
E2E is a trademark of Texas Instruments.
Blu-ray is a registered trademark of Blu-ray Disc Association.
NanoFree is a trademark of Texas Insturments.
All other trademarks are the property of their respective owners.
12.4 Electrostatic Discharge Caution
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
12.5 Glossary
SLYZ022 — TI Glossary.
This glossary lists and explains terms, acronyms, and definitions.
13 Mechanical, Packaging, and Orderable Information
The following pages include mechanical packaging and orderable information. This information is the most
current data available for the designated devices. This data is subject to change without notice and revision of
this document. For browser based versions of this data sheet, refer to the left hand navigation.
Submit Documentation Feedback
Copyright © 2003–2015, Texas Instruments Incorporated
Product Folder Links: SN74LVC3G17
13
PACKAGE OPTION ADDENDUM
www.ti.com
29-Jan-2021
PACKAGING INFORMATION
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
(2)
Lead finish/
Ball material
MSL Peak Temp
Op Temp (°C)
Device Marking
(3)
(4/5)
(6)
SN74LVC3G17DCTR
ACTIVE
SM8
DCT
8
3000
RoHS & Green
NIPDAU
Level-1-260C-UNLIM
-40 to 125
C17
(R, Z)
SN74LVC3G17DCTRE4
ACTIVE
SM8
DCT
8
3000
RoHS & Green
NIPDAU
Level-1-260C-UNLIM
-40 to 125
C17
(R, Z)
SN74LVC3G17DCTRG4
ACTIVE
SM8
DCT
8
3000
RoHS & Green
NIPDAU
Level-1-260C-UNLIM
-40 to 125
C17
(R, Z)
SN74LVC3G17DCUR
ACTIVE
VSSOP
DCU
8
3000
RoHS & Green
NIPDAU | SN
Level-1-260C-UNLIM
-40 to 125
(17, C17J, C17Q, C
17R)
CZ
SN74LVC3G17DCURG4
ACTIVE
VSSOP
DCU
8
3000
RoHS & Green
NIPDAU
Level-1-260C-UNLIM
-40 to 125
C17R
SN74LVC3G17YZPR
ACTIVE
DSBGA
YZP
8
3000
RoHS & Green
SNAGCU
Level-1-260C-UNLIM
-40 to 85
C7N
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance
do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may
reference these types of products as "Pb-Free".
RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption.
Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of