SN55116, SN75116, SN75117, SN75118, SN75119
DIFFERENTIAL LINE TRANSCEIVERS
SLLS073D − MAY 1976 − REVISED MAY 1998
features common to all types
D
D
D
D
D
D
D
additional features of the SN55116/SN75116
D Choice of Ceramic or Plastic Packages
D Independent Driver and Receiver
D Choice of Open-Collector or Totem-Pole
Single 5-V Supply
3-State Driver Output Circuitry
TTL-Compatible Driver Inputs
TTL-Compatible Receiver Output
Differential Line Operation
Receiver Output Strobe (SN55116,
SN75116, SN75117) or Enable (SN75118,
SN75119)
Designed for Party-Line (Data-Bus)
Applications
Outputs on Both Driver and Receiver
D Dual Data Inputs on Driver
D Optional Line-Termination Resistor in
D
D
Receiver
± 15-V Receiver Common-Mode Capability
Receiver Frequency-Response Control
additional features of the SN75117
D Driver Output Internally Connected to
Receiver Input
The SN75118 is an SN75116 With 3-State Receiver Output Circuitry
The SN75119 is an SN75117 With 3-State Receiver Output Circuitry
description
These integrated circuits are designed for use in interfacing between TTL-type digital systems and differential
data-transmission lines. They are especially useful for party-line (data-bus) applications. Each of these circuit
types combine in one package a 3-state differential line driver and a differential-input line receiver, both of which
operate from a single 5-V power supply. The driver inputs and the receiver outputs are TTL compatible. The
driver employed is similar to the SN55113 and SN75113 3-state line drivers, and the receiver is similar to the
SN55115 and SN75115 line receivers.
The SN55116, SN75116, and SN75118 offer all the features of the SN55113 and SN75113 drivers and the
SN55115 and SN75115 receivers combined. The driver performs the dual input AND and NAND functions when
enabled or presents a high impedance to the load when in the disabled state. The driver output stages are similar
to TTL totem-pole outputs, but have the current-sinking portion separated from the current-sourcing portion and
both are brought out to adjacent package terminals. This feature allows the user the option of using the driver
in the open-collector output configuration, or, by connecting the adjacent source and sink terminals together,
of using the driver in the normal totem-pole output configuration.
The receiver portion of the SN55116, SN75116, and SN75118 features a differential-input circuit having a
common-mode voltage range of ± 15 V. An internal 130-Ω equivalent resistor also is provided, which optionally
can be used to terminate the transmission line. A frequency-response control terminal allows the user to reduce
the speed of the receiver or to improve differential noise immunity. The receivers of the SN55116 and SN75116
have an output strobe and a split totem-pole output. The receiver of the SN75118 has an output-enable for the
3-state split totem-pole output. The receiver section of either circuit is independent of the driver section except
for the VCC and ground terminals.
The SN75117 and SN75119 provide the basic driver and receiver functions of the SN55116, SN75116, and
SN75118, but use a package that is only half as large. The SN75117 and SN75119 are intended primarily for
party-line or bus-organized systems because the driver outputs are internally connected to the receiver inputs.
The driver has a single data input and a single enable input. The SN75117 receiver has an output strobe, while
the SN75119 receiver has a 3-state output enable. However, these devices do not provide output connection
options, line-termination resistors, or receiver frequency-response controls.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Copyright 1998, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
•
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443
•
1
SN55116, SN75116, SN75117, SN75118, SN75119
DIFFERENTIAL LINE TRANSCEIVERS
SLLS073D − MAY 1976 − REVISED MAY 1998
description (continued)
The SN55116 is characterized for operation over the full military temperature range of − 55°C to 125°C. The
SN75116, SN75117, SN75118, and SN75119 are characterized for operation from 0°C to 70°C.
SN55116 . . . J PACKAGE
SN75116 . . . D OR N PACKAGE
(TOP VIEW)
16
1
DZP
DZS
DYS
DYP
RA
RT
RB
GND
2
15
3
14
4
13
5
12
6
11
7
10
8
9
SN75118 . . . D OR N PACKAGE
(TOP VIEW)
DZP
DZS
DYS
DYP
RA
RT
RB
GND
VCC
DB
DA
DE
RYP
RYS
RS
RTC
SN55116 . . . FK PACKAGE
(TOP VIEW)
DZS
DZP
NC
VCC
DB
4
3 2 1 20 19
18
5
17
6
16
7
15
8
14
9 10 11 12 13
16
2
15
3
14
4
13
5
12
6
11
7
10
8
9
VCC
DB
DA
DE
RYP
RYS
RE
RTC
SN75117 . . . D OR P PACKAGE
(TOP VIEW)
DI
B
A
GND
DA
DE
NC
RYP
RYS
1
8
2
7
3
6
4
5
VCC
DE
RY
RS
SN75119 . . . D OR P PACKAGE
(TOP VIEW)
DI
B
A
GND
RB
GND
NC
RTC
RS
DYS
DYP
NC
RA
RT
1
1
8
2
7
3
6
4
5
VCC
DE
RY
RE
NC − No internal connection
Function Tables
’116, SN75118
DRIVER
INPUTS
DE
DA
DB
L
H
H
H
X
L
X
H
X
X
L
H
SN75117, SN75119
DRIVER
INPUTS
OUTPUTS
DY
DZ
Z
L
L
H
DI
DE
H
L
X
H
H
L
Z
H
H
L
DIFF
INPUT
L
H
H
X
L
H
L
H
Z
INPUTS
OUTPUTS RY
’116
SN75118
H
H
L
H
L
Z
SN75117, SN75119
RECEIVER
’116, SN75118
RECEIVER
RS/RE
OUTPUTS
A
B
Z
H
L
A
B
H
L
X
L
H
X
OUTPUT RY
RS/RE SN75117 SN75119
H
H
L
H
L
H
H
L
Z
H = high level (VI ≥ VIH min or VID more positive than VTH max), L = low level (VI ≤ VIL max or VID more negative than VTL max),
X = irrelevant, Z = high impedance (off)
2
•
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443
•
SN55116, SN75116, SN75117, SN75118, SN75119
DIFFERENTIAL LINE TRANSCEIVERS
SLLS073D − MAY 1976 − REVISED MAY 1998
logic symbol†
logic diagram (positive logic)
’116‡
&
DE
DA
DB
RB
RA
RT
RS
RTC
13
14
4
3
EN
1
2
15
7
DE
DYS
RT
11
DZS
DB
DA
DB
RB
RA
RT
RE
RTC
14
DI
RS
RY
15
1
RYP
2
RYS
RB
4
3
EN
1
15
2
DYP
RA
DYS
RT
DZP
RTC
DZS
RS
7
RE
RY
DZP (pullup)
DZS (sink)
12
5
11
6
RYP (pullup)
RYS (sink)
9
10
5
6
10
9
12
RT
11
EN
RESP
SN75118 Receiver‡
RYP
RE
RYS
RB
RA
RT
7
1
3
EN
5
RTC
2
10
7
12
5
11
6
1
SN75117 Driver and Receiver‡
B
RS
&
DE
5
6
EN
RYS (sink)
A
6
7
RYP (pullup)
9
5
7
6
1
3
SN75119‡
DI
DYS (sink)
7
DI
DE
DYP (pullup)
’116 Receiver‡
SN75117‡
DE
14
RESP
&
13
4
3
SN75118‡
DE
13
DZP
DA
12
10
9
DYP
&
5
6
’116 and SN75118‡
2
3
2
B
RE
EN
DE
5
B
BUS
SN75119 Driver and Receiver‡
7
1
6
3
2
‡
A
A
DI
†
RY
RY
A
B
BUS
These symbols are in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12.
Pin numbers shown for the SN55116 and SN75116 are for the D, J, and N packages, those shown for the SN75118 are for the D and N packages,
and those shown for SN75117 and SN75119 are for the D and P packages.
•
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443
•
3
SN55116, SN75116, SN75117, SN75118, SN75119
DIFFERENTIAL LINE TRANSCEIVERS
SLLS073D − MAY 1976 − REVISED MAY 1998
schematics of inputs and outputs
EQUIVALENT OF
EACH DRIVER INPUT
AND EACH RE AND RS INPUT
VCC
4 kΩ
NOM
TYPICAL OF ALL OUTPUTS
EQUIVALENT OF
EACH RECEIVER INPUT
(EXCLUDING ENABLES AND STROBES)
VCC
VCC
1 pF NOM
Input
Input
7 kΩ
NOM
8 kΩ
NOM
R
Pullup
output†
Sink
output†
130 Ω
NOM
Driver output R = 9 Ω NOM
Receiver output R = 20 Ω NOM
†
On SN75117 and SN75119, common outputs
replace the separate pullup and sink outputs.
absolute maximum ratings over operating free-air temperature (unless otherwise noted)‡
Supply voltage, VCC (see Notes 1 and 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V
Input voltage, VI: DA, DB, DE, DI, RE, and RS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5 V
RA, RB, RT for ’116, SN75118 only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±25 V
A and B for SN75117, SN75119 only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 to 6 V
Off-state voltage applied to open-collector outputs: ’116, SN75118 only . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 V
Continuous total power dissipation (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . See Dissipation Rating Table
Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65°C to 150°C
Case temperature for 60 seconds, TC: FK package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C
Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds: J package . . . . . . . . . . . . . . . . . . . . . 300°C
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds: D, N, or P package . . . . . . . . . . . . . 260°C
‡
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. All voltage values are with respect to the network ground terminal.
2. In the FK and J packages, the SN55116 chip is alloy mounted. The SN75116, SN75117, SN75118, and SN75119 chips are glass
mounted.
4
•
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443
•
SN55116, SN75116, SN75117, SN75118, SN75119
DIFFERENTIAL LINE TRANSCEIVERS
SLLS073D − MAY 1976 − REVISED MAY 1998
DISSIPATION RATING TABLE
PACKAGE
TA ≤ 25°C
POWER RATING
DERATING FACTOR
ABOVE TA = 25°C
TA = 70°C
POWER RATING
TA = 125°C
POWER RATING
D (8 pin)
725 mW
5.8 mW/°C
464 mW
—
D (16 pin)
950 mW
7.6 mW/°C
608 mW
—
FK
1375 mW
11.0 mW/°C
880 mW
275 mW
J
1375 mW
11.0 mW/°C
880 mW
275 mW
N
1150 mW
9.2 mW/°C
736 mW
—
P
1000 mW
8.0 mW/°C
640 mW
—
recommended operating conditions
Supply voltage, VCC
High-level input voltage, VIH
Low-level input voltage, VIL
All inputs except differential
inputs
Low level output current
Low-level
current, IOL
NOM
MAX
MIN
NOM
MAX
4.5
5
5.5
4.5
5
5.5
2
0.8
−40
Receivers
−5
−5
Drivers
40
40
Receivers
15
15
± 15
± 15
SN75117, SN75119
0
6
0
± 15
SN75117, SN75119
Operating free-air temperature, TA
•
•
6
± 15
0
6
0
6
−55
125
0
70
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443
V
V
0.8
’116, SN75118
Common mode receiver input voltage
Common-mode
voltage, VICR
2
−40
’116, SN75118
Receiver input voltage,
voltage VI
UNIT
MIN
Drivers
High level output current,
High-level
current IOH
SN75116, SN75117,
SN75118, SN75119
SN55116
PARAMETER
V
mA
mA
V
V
°C
5
VIK
VOH
’116, SN75118
TEST CONDITIONS†
PARAMETER
Input clamp voltage
VCC = MIN,
VCC = MIN,
VIL = 0.8 V,
IIH = 2 V
High-level output voltage
MIN
II = − 12 mA
IOH = − 40 mA
2
3
2
3
55°C
125°C
TA = − 55
C to 125
C
(SN55116)
IOH = − 10 mA
2
2
IOH = − 40 mA
1.8
1.8
IOL = 40 mA
VIH = 2 V,
VIL = 0.8 V,
IO = − 40 mA,
DE at 0.8 V
• HOUSTON,
• DALLAS,
POST
POST
OFFICE
OFFICE
BOXBOX
1443655303
TEXAS
TEXAS
77251−1443
75265
TA = 25°C
†
Input current at maximum
input voltage
IIH
High-level input current
IIL
Low-level input current
IOS
ICC
−1.5
3.4
VCC = MAX,
II
−0.9
2.4
VCC = MIN,
VCC = MAX,,
VO = 12 V
TA = MAX
VCC = MAX,
VO = 0 to VCC,
VCC = MAX
MAX,
DE at 0.8
0 8 V,
V
TA = MAX
MAX
3.4
Output clamp voltage
Off-state
Off
state (high
(high-impedance-state)
impedance state)
output current
−1.5
TYP‡
2.4
Low-level output voltage
IOZ
−0.9
MIN
IOH = − 10 mA
VOK
Off-state open-collector output current
MAX
TA = 25°C (SN55116),
0°C
TA = 0
C to 70°C
70 C
(SN75116, SN75117,
SN75118, SN75119)
VOL
IO(off)
SN75117, SN75119
TYP‡
1
UNIT
V
V
0.4
0.4
V
−1.5
−1.5
V
10
SN55116
200
SN75116,
SN75118
20
µA
± 10
DE at 0.8 V, TA = 25°C
VO = 0
SN55116
−300
VO = 0.4 V to VCC
SN55116
± 150
VO = 0 to VCC
SN75116,
SN75118
± 20
µA
µ
VCC = MAX
MAX,
55V
VI = 5.5
VCC = MAX,
VI = 2.4 V
40
40
µA
VCC = MAX,
VI = 0.4 V
−1.6
−1.6
mA
Short-circuit output current§
VCC = MAX,
VO = 0,
Supply current (driver and receiver
combined)
VCC = MAX
MAX,
TA = 25°C
Driver or
enable input
1
TA = 25°C
−40
42
1
mA
−120
−40
−120
mA
60
42
60
mA
All parameters with the exception of off-state open-collector output current are measured with the active pullup connected to the sink output. For conditions shown as MIN or MAX,
use the appropriate value specified under recommended operating conditions.
‡ All typical values are at V
CC = 5 V and TA = 25°C.
§ Not more than one output should be shorted at a time, and duration of the short circuit should not exceed one second.
SN55116, SN75116, SN75117, SN75118, SN75119
DIFFERENTIAL LINE TRANSCEIVERS
driver section
SLLS073D − MAY 1976 − REVISED MAY 1998
6
electrical characteristics over recommended operating free-air temperature range (unless otherwise noted)
SN55116, SN75116, SN75117, SN75118, SN75119
DIFFERENTIAL LINE TRANSCEIVERS
SLLS073D − MAY 1976 − REVISED MAY 1998
switching characteristics, VCC = 5 V, CL = 30 pF, TA = 25°C
driver section
PARAMETER
TEST CONDITIONS
TYP
MAX
14
30
12
30
See Figure 14
8
20
ns
See Figure 15
17
40
ns
RL = 180 Ω,
See Figure 14
16
30
ns
RL = 250 Ω,
See Figure 15
20
35
ns
tPLH
Propagation-delay time, low-to-high level output
tPHL
Propagation-delay time, high-to-low level output
tPZH
Output-enable time to high level
RL = 180 Ω,
tPZL
Output-enable time to low level
RL = 250 Ω,
tPHZ
Output-disable time from high level
tPLZ
Output-disable time from low level
See Figure 13
•
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443
•
MIN
UNIT
ns
7
TEST CONDITIONS†
PARAMETER
VIT +
VIT −
• HOUSTON,
• DALLAS,
POST
POST
OFFICE
OFFICE
BOXBOX
1443655303
TEXAS
TEXAS
77251−1443
75265
VI
VOH
VOL
II(rec)
II
†
Positive going threshold
Positive-going
voltage§
Negative going threshold voltage§
Negative-going
VO = 0.4 V,
See Note 3
IOL = 15 mA,
VO = 2.4 V,
See Note 3
IOL = − 5 mA,
Input voltage range#
VCC = 5 V,
High level output voltage
High-level
IOH = − 5 mA,
See Note 3
IOL = 15 mA,
See Note 3
Low level output voltage
Low-level
VCC = MAX
MAX,
See Note 3
Receiver input
p current
IInputt currentt att maximum
i
input voltage
’116, SN75118
MIN
TYP‡
VCC = MIN, VICR = 0,
See Note 4
MIN
TYP‡
MAX
05
0.5
05
0.5
1
1
UNIT
V
VCC = 5 V, VICR = MAX,
See Note 5
VCC = MIN, VICR = 0,
See Note 4
SN75117, SN75119
MAX
−0.5¶
−0.5¶
VCC = 5 V, VICR = MAX,
See Note 5
−1¶
−1¶
VID = − 1 V or 1 V,
See Note 3
15
to
−15
6
to
0
VCC = MIN,
VICR = 0,
VID = − 0.5 V,
See Notes 4 and 6
2.4
24
24
2.4
VCC = 5 V,
VICR = MAX,
VID = − 1 V,
See Note 5
2.4
2
4
24
2.4
VCC = MIN,
VICR = 0,
VID = 0.5 V,
See Notes 4 and 7
04
0.4
04
0.4
VCC = 5 V,
VICR = MAX,
VID = 1 V,
See Note 5
04
0.4
04
0.4
VI = 0,
Other input at 0 V
−0.5
−0.9
−0.5
−1
VI = 0.4 V,
Other input at 2.4 V
−0.4
−0.7
−0.4
−0.8
VI = 2.4 V,
Other input at 0.4 V
0.1
0.3
0.1
0.4
V
V
V
V
mA
Strobe
VCC = MIN,
Vstrobe = 4.5 V
VID = − 0.5 V,
’116 SN75117
’116,
5
5
µA
Enable
VCC = MAX,
VI = 5.5 V
SN75118, SN75119
1
1
mA
Unless otherwise noted, Vstrobe = 2.4 V. All parameters, with the exception of off-state open-collector output current, are measured with the active pullup connected to the sink output.
For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions.
‡ All typical values are at V
CC = 5 V, TA = 25°C, and VIC = 0.
§ Differential voltages are at the B input terminal with respect to the A input terminal. Neither receiver input of the SN75117 or SN75119 should be taken negative with respect to GND.
¶ The algebraic convention, where the less positive (more negative) limit is designated as minimum, is used in this data sheet for threshold voltages only.
# Input voltage range is the voltage range that, if exceeded at either input, will cause the receiver to cease functioning properly.
NOTES: 3. Measurement of these characteristics on the SN75117 and SN75119 requires the driver to be disabled with the driver enable at 0.8 V.
4. This applies with the less positive receiver input grounded.
5. For ’116 and SN75118, this applies with the more positive receiver input at 15 V or the more negative receiver input at − 15 V. For SN75117 and SN75119, this applies
with the more positive receiver input at 6 V.
6. For SN55116, VID = − 1 V
7. For SN55116, VID = 1 V
SN55116, SN75116, SN75117, SN75118, SN75119
DIFFERENTIAL LINE TRANSCEIVERS
receiver section
SLLS073D − MAY 1976 − REVISED MAY 1998
8
electrical characteristics over recommended operating free-air temperature range (unless otherwise noted)
receiver section (continued)
TEST CONDITIONS†
PARAMETER
IIH
High-level input current
II
Low-level
Low
level input current
I(RTC)
IO(off)
VCC = MAX,
VI = 2.4 V
SN75118, SN75119
Strobe
VCC = MAX,
Vstrobe = 0.4 V,
VID = 0.5 V,
See Notes 4 and 7
Enable
VCC = MAX,
Response time control current (RTC)
Response-time-control
Off-state
Off
state open-collector
open collector output current
Off-state
Off
t t (hi
(high-impedance-state)
hi
d
t t )
output current
MIN
TYP‡
SN75117, SN75119
MAX
MIN
TYP‡
MAX
40
40
’116,
’116 SN75117
−2.4
24
−2.4
24
VI = 0.4 V
SN75118, SN75119
−1.6
−1.6
VCC = MAX,
RC at 0 V,
VID = 0.5 V,
See Notes 4 and 7
TA = 25°C
VCC = MAX,
VO = 12 V,
VID = − 1 V
TA = 25°C
VCC = MAX,
VO = 0 to VCC,
RE at 0.4 V
TA = 25°C
−1.2
12
TA = MAX
RT
Line-terminating resistance
VCC = 5 V
IOS
Sh t i it output
Short-circuit
t t currentt§
VCC = MAX,
VID = − 0.5 V,
ICC
Short current (driver and
receiver combined)
VCC = MAX,
VID = 0.5 V,
See Notes 4 and 7
VO = 0,
See Notes 4 and 6
1
mA
10
µA
200
SN75116, SN75118
20
SN75118, SN75119
± 10
SN75118
± 20
± 10
µA
± 20
SN75119
TA = 25°C
77
167
TA = 25°C
−15
15
−80
80
TA = 25°C
µA
mA
SN55116
TA = MAX
UNIT
42
60
Ω
−15
15
42
−80
80
mA
60
mA
†
Unless otherwise noted, Vstrobe = 2.4 V. All parameters, with the exception of off-state open-collector output current, are measured with the active pullup connected to the sink output.
For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions.
‡ All typical values are at V
CC = 5 V, TA = 25°C, and VIC = 0.
§ Not more than one output should be shorted at a time.
NOTES: 4. This applies with the less positive receiver input grounded.
6. For SN55116, VID = − 1 V
7. For SN55116, VID = 1 V
SLLS073D − MAY 1976 − REVISED MAY 1998
9
SN55116, SN75116, SN75117, SN75118, SN75119
DIFFERENTIAL LINE TRANSCEIVERS
• HOUSTON,
• DALLAS,
POST
POST
OFFICE
OFFICE
BOXBOX
1443655303
TEXAS
TEXAS
77251−1443
75265
IOZ
Enable
’116, SN75118
SN55116, SN75116, SN75117, SN75118, SN75119
DIFFERENTIAL LINE TRANSCEIVERS
SLLS073D − MAY 1976 − REVISED MAY 1998
switching characteristics, VCC = 5 V, CL = 30 pF, TA = 25°C
receiver section
PARAMETER
TEST CONDITIONS
tPLH
Propagation-delay time, low-to-high-level output
tPHL
Propagation-delay time, high-to-low-level output
tPZH
Output-enable time to high level
tPZL
Output-enable time to low level
tPHZ
Output-disable time from high level
tPLZ
Output-disable time from low level
SN75118
and
SN75119
only
l
TYP
MAX
20
75
UNIT
ns
17
75
ns
RL = 400 Ω,
Ω
See Figure 16
RL = 480 Ω,
See Figure 14
9
20
ns
RL = 250 Ω,
See Figure 15
16
35
ns
RL = 480 Ω,
See Figure 14
12
30
ns
RL = 250 Ω,
See Figure 15
17
35
ns
•
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443
•
MIN
11
SN55116, SN75116, SN75117, SN75118, SN75119
DIFFERENTIAL LINE TRANSCEIVERS
SLLS073D − MAY 1976 − REVISED MAY 1998
TYPICAL CHARACTERISTICS†
DRIVER
DRIVER
OUTPUT VOLTAGE
vs
INPUT VOLTAGE
OUTPUT VOLTAGE
vs
INPUT VOLTAGE
ÁÁÁÁ
ÁÁÁÁ
6
ÁÁ
ÁÁ
VCC = 5 V
No Load
ÎÎÎÎÎ
ÎÎÎÎÎ
ÎÎÎÎ
ÎÎÎÎ
ÎÎÎÎÎ
ÎÎÎÎÎ
5
VCC = 5.5 V
4
VO
VO − Output Voltage − V
VO
VO − Output Voltage − V
5
ÎÎÎÎÎ
ÁÁÁÁÁ
ÁÁÁÁÁ
ÎÎÎÎÎ
6
No Load
TA = 25°C
VCC = 5 V
VCC = 4.5 V
3
4
ÎÎÎÎÎÎ
ÎÎÎÎÎÎ
ÎÎÎÎÎ
ÎÎÎÎÎ
ÎÎÎÎÎ
ÎÎÎÎÎ
3
TA = − 55°C
ÁÁÁ
ÁÁÁ
2
1
2
TA = 25°C
1
0
TA = 125°C
0
0
1
2
3
0
4
1
VI − Input Voltage − V
2
Figure 2
DRIVER
DRIVER
HIGH-LEVEL OUTPUT VOLTAGE
vs
HIGH-LEVEL OUTPUT CURRENT
LOW-LEVEL OUTPUT VOLTAGE
vs
LOW-LEVEL OUTPUT CURRENT
TA = 25°C
TA = 25°C
VOL
VOL − Low-Level Output Voltage − V
VOH
V
OH − High-Level Output Voltage − V
ÎÎÎÎ
ÎÎÎÎ
0.6
6
5
ÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎ
ÎÎÎÎ
VCC = 5.5 V
4
VCC = 5 V
3
VCC = 4.5 V
2
ÁÁ
ÁÁ
1
0.5
ÎÎÎÎÎ
VCC = 4.5 V
0.4
ÎÎÎÎ
ÎÎÎÎ
0.3
VCC = 5.5 V
0.2
0.1
0
0
0
−20
−40
−60
−80
0
−100
20
40
50
80
100
120
IOL − Low-Level Output Current − mA
IOH − High-Level Output Current − mA
Figure 3
†
4
VI − Input Voltage − V
Figure 1
ÁÁ
ÁÁ
3
Figure 4
Operation of the device at these or any other conditions beyond those indicated under ‘‘recommended operating conditions” is not implied.
12
•
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443
•
SN55116, SN75116, SN75117, SN75118, SN75119
DIFFERENTIAL LINE TRANSCEIVERS
SLLS073D − MAY 1976 − REVISED MAY 1998
TYPICAL CHARACTERISTICS†
t pd − Propagation Delay Time − ns
18
16
14
12
10
DRIVER
OUTPUT-ENABLE AND DISABLE TIME
vs
FREE-AIR TEMPERATURE
ÁÁÁÁ
ÎÎÎÎ
ÁÁÁÁ
ÎÎÎÎ
ÁÁÁÁ
ÎÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎ
ÁÁÁÁÁ
ÁÁÁÁÁ
ÎÎÎÎ
ÁÁÁÁÁ
ÎÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎ
30
VCC = 5 V
CL = 30 pF
See Figure 13
Output Enable and Disable Time − ns
20
DRIVER
PROPAGATION-DELAY TIME
vs
FREE-AIR TEMPERATURE
tPLH
tPHL
8
6
4
VCC = 5 V
See Note A
25
tPLZ
ÎÎÎ
ÎÎÎ
20
tPZL
tPHZ
15
ÎÎÎ
ÎÎÎ
10
tPZH
5
2
0
−75 −50
0
−25
25
50
75
100
0
−75 −50
125
RECEIVER
OUTPUT VOLTAGE
vs
DIFFERENTIAL INPUT VOLTAGE
ÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁ
ÎÎÎÎ
ÎÎÎÎ ÁÁÁÁÁÁÁ
VCC = 5.5 V
VCC = 5 V
Load = 2 kΩ to VCC
5
VCC = 4.5 V
VO
VO − Output Voltage − V
VO − Output Voltage − V
VO
125
ÁÁÁÁÁÁ
ÁÁÁÁÁÁ
ÎÎÎÎÎÎ
ÎÎÎÎÎÎÎ
ÁÁÁÁÁÁ
ÎÎÎÎÎÎÎ
ÎÎÎÎ
ÎÎÎÎ
6
Load = 2 kΩ to VCC
TA = 25°C
3
4
TA = 125°C
3
ÎÎÎÎ
ÎÎÎÎ
ÁÁ
ÁÁ ÎÎÎÎ
ÎÎÎÎ
2
1
TA = 25°C
2
TA = − 55°C
1
−0.1
0
0.1
0
−0.2
0.2
−0.1
0
0.1
0.2
VID − Differential Input Voltage − V
VID − Differential Input Voltage − V
Figure 7
†
100
RECEIVER
4
0
−0.2
75
OUTPUT VOLTAGE
vs
DIFFERENTIAL INPUT VOLTAGE
VCC = 5 V
ÁÁÁ
ÁÁÁ
50
Figure 6
Figure 5
5
25
TA − Free-Air Temperature − °C
NOTE A: For tPZH and tPHZ: RL = 480 Ω, see Figure 14. For tPZL
and tPLZ: RL = 250 Ω, see Figure 15.
TA − Free-Air Temperature − °C
6
0
−25
Figure 8
Operation of the device at these or any other conditions beyond those indicated under ‘‘recommended operating conditions” is not implied.
•
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443
•
13
SN55116, SN75116, SN75117, SN75118, SN75119
DIFFERENTIAL LINE TRANSCEIVERS
SLLS073D − MAY 1976 − REVISED MAY 1998
TYPICAL CHARACTERISTICS†
RECEIVER
RECEIVER
OUTPUT-ENABLE AND DISABLE TIME
vs
FREE-AIR TEMPERATURE
PROPAGATION-DELAY TIME
vs
FREE-AIR TEMPERATURE
25
ÎÎÎÎ
ÁÁÁÁÁ
ÁÁÁÁÁ
ÎÎÎÎ
ÎÎÎÎÎ
ÁÁÁÁÁÎÎÎ
ÎÎÎÎÎ
ÎÎÎ
30
VCC = 5 V
RL = 400 Ω
See Figure 16
Output Enable and Disable Time − ns
t pd − Propagation Delay Time − ns
30
tPLH
20
ÎÎ
ÎÎ
tPHL
15
10
5
0
−75
−50
0
25
50
75
100
−25
TA − Free-Air Temperature − °C
ÁÁÁÁ
ÁÁÁÁ
ÎÎÎÎ
ÁÁÁÁ
ÎÎÎÎ
VCC = 5 V
See Note A
25
20
15
tPHZ
10
tPZH
5
0
−75 −50
0
25
50
75
100 125
−25
TA − Free-Air Temperature − °C
NOTE A: For tPZH and tPHZ :RL= 480 Ω, see Figure 14. For tPZL
and tPLZ: RL = 250 Ω, see Figure 15.
125
Figure 10
ÁÁ
ÁÁ
DRIVER AND RECEIVER
DRIVER AND RECEIVER
SUPPLY CURRENT
vs
SUPPLY VOLTAGE
SUPPLY CURRENT
vs
FREE-AIR TEMPERATURE
ÎÎÎÎÎ
ÁÁÁÁ
ÎÎÎÎ
ÁÁÁÁ
ÎÎÎÎÎ
VCC = 5 V
45
40
60
50
40
ÁÁ
ÁÁ
ÁÁ
30
20
10
1
2
3
4
5
6
VCC − Supply Voltage − V
7
35
30
25
20
15
10
5
0
−75 −50
0
0
8
Figure 11
†
ÎÎÎÎ
50
No Load
TA = 25°C
IICC
CC − Supply Current − mA
IICC
CC − Supply Current − mA
70
tPLZ
tPZL
Figure 9
80
ÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎ
0
25
50
75
100
−25
TA − Free-Air Temperature − °C
125
Figure 12
Operation of the device at these or any other conditions beyond those indicated under ‘‘recommended operating conditions” is not implied.
14
•
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443
•
SN55116, SN75116, SN75117, SN75118, SN75119
DIFFERENTIAL LINE TRANSCEIVERS
SLLS073D − MAY 1976 − REVISED MAY 1998
PARAMETER MEASUREMENT INFORMATION
From Output
Under Test
Test
Point
From Output
Under Test
CL = 30 pF
(see Note A)
CL = 30 pF
(see Note A)
LOAD CIRCUIT
≤ 5 ns
LOAD CIRCUIT
≤ 5 ns
3V
90%
1.5 V
10%
10%
Input
0V
tPHL
tPLH
1.5 V
10%
VOH
Output
tPHL
1.5 V
VOH
1.5 V
1.5 V
VOLTAGE WAVEFORMS
VOLTAGE WAVEFORMS
tPLH and tPHL (drivers only)
tPZH and tPHZ
Figure 13
Figure 14
5V
CL = 30 pF
(see Note A)
Test
Point
From Output
Under Test
RL = 400 Ω
CL = 30 pF
(see Note A)
LOAD CIRCUIT
See Note B
LOAD CIRCUIT
≤ 5 ns
≤ 5 ns
90%
1.5 V
3V
10%
≤ 5 ns
B Input
(see Note C)
10%
0V
tPZL
≤ 5 ns
VH
90%
50%
90%
50%
10%
tPHL
tPLZ
Output
5V
Test
Point
RL = 250 Ω
From Output
Under Test
90%
1.5 V
0.5 V
Voff = 0 V
tPHZ
VOL
Input
10%
0V
tPZH
VOL
AND
Output
3V
90%
1.5 V
90%
1.5 V
1.5 V
tPLH
≤ 5 ns
10%
VOH
NAND
Output
RL = 180 Ω
≤ 5 ns
90%
1.5 V
Input
Test
Point
Voff = 5 V
0.5 V
1.5 V
1.5 V
Output
See Note C
VL
tPLH
VOH
1.5 V
VOL
VOL
VOLTAGE WAVEFORMS
VOLTAGE WAVEFORMS
tPZL and tPLZ
(SN75118 and SN75119 receivers only)
tPLH and tPHL (receivers only)
Figure 16
Figure 15
NOTES: A. CL includes probe and jig capacitance.
B. All diodes are 1N3064 or equivalent.
C. For ’116 and SN75118, VH = 3 V, VL = − 3 V, the A input is at 0 V.
For SN75117 and SN75119, VH = 3 V, VL = 0, the A input is at 1.5 V.
D. When testing the ’116 and SN75118 receiver sections, the response-time control and the termination resistor pins are left open.
•
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443
•
15
PACKAGE OPTION ADDENDUM
www.ti.com
19-Jul-2022
PACKAGING INFORMATION
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
(2)
Lead finish/
Ball material
MSL Peak Temp
Op Temp (°C)
Device Marking
(3)
Samples
(4/5)
(6)
5962-88511012A
ACTIVE
LCCC
FK
20
1
Non-RoHS
& Green
SNPB
N / A for Pkg Type
-55 to 125
596288511012A
SNJ55
116FK
5962-8851101EA
ACTIVE
CDIP
J
16
1
Non-RoHS
& Green
SNPB
N / A for Pkg Type
-55 to 125
5962-8851101EA
SNJ55116J
Samples
SN75116D
ACTIVE
SOIC
D
16
40
RoHS & Green
NIPDAU
Level-1-260C-UNLIM
0 to 70
SN75116
Samples
SN75116N
ACTIVE
PDIP
N
16
25
RoHS & Green
NIPDAU
N / A for Pkg Type
0 to 70
SN75116N
Samples
SN75116NSR
ACTIVE
SO
NS
16
2000
RoHS & Green
NIPDAU
Level-1-260C-UNLIM
0 to 70
SN75116
Samples
SN75117P
ACTIVE
PDIP
P
8
50
RoHS & Green
NIPDAU
N / A for Pkg Type
0 to 70
SN75117P
Samples
SN75118N
ACTIVE
PDIP
N
16
25
RoHS & Green
NIPDAU
N / A for Pkg Type
0 to 70
SN75118N
Samples
SN75119P
ACTIVE
PDIP
P
8
50
RoHS & Green
NIPDAU
N / A for Pkg Type
0 to 70
SN75119P
Samples
SNJ55116FK
ACTIVE
LCCC
FK
20
1
Non-RoHS
& Green
SNPB
N / A for Pkg Type
-55 to 125
596288511012A
SNJ55
116FK
SNJ55116J
ACTIVE
CDIP
J
16
1
Non-RoHS
& Green
SNPB
N / A for Pkg Type
-55 to 125
5962-8851101EA
SNJ55116J
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance
do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may
reference these types of products as "Pb-Free".
RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption.
Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of