SN75155
LINE DRIVER AND RECEIVER
SLLS017C − JULY 1986 − REVISED MAY 1995
D Meets or Exceeds the Requirements of
D
D
D
D
D
D
D
D OR P PACKAGE
TOP VIEW
ANSI EIA/TIA-232-E and ITU
Recommendation V.28
10-mA Current Limited Output
Wide Range of Supply Voltage
VCC = 4.5 V to 15 V
Low Power . . . 130 mW
Built-In 5-V Regulator
Response Control Provides:
Input Threshold Shifting
Input Noise Filtering
Power-Off Output Resistance . . . 300 Ω Typ
Driver Input TTL Compatible
VCC −
DA
RY
GND
1
8
2
7
3
6
4
5
VCC +
DY
RTC
RA
description
The SN75155 monolithic line driver and receiver is designed to satisfy the requirements of the standard
interface between data terminal equipment and data communication equipment as defined by ANSI
EIA/TIA-232-E. A response control input is provided for the receiver. A resistor or a resistor and a bias voltage
can be connected between the response control input and ground to provide noise filtering. The driver used is
similar to the SN75188. The receiver used is similar to the SN75189A.
The SN75155 is characterized for operation from 0°C to 70°C.
logic symbol†
DA
RA
RTC
†
logic diagram
2
7
DY
VCC +
DA
5
6
VCC −
3
RESP
RY
1
8
2
4
GND
This symbol is in accordance with ANSI/IEEE Std 91-1984 and
IEC Publication 617-12
RA
RTC
5
6
7
DY
Reference
Regulator
3
RY
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Copyright © 1995, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
1
SN75155
LINE DRIVER AND RECEIVER
SLLS017C − JULY 1986 − REVISED MAY 1995
schematic
DA
VCC +
2
8
60 Ω
35 kΩ
7
300 Ω
RA
GND
RTC
VCC −
5
DY
3.5 kΩ
8.5
kΩ
4
6
55 Ω
1
3
RY
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)†
Supply voltage, VCC + (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 V
Supply voltage, VCC − (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −15 V
Input voltage range, VI: Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −15 V to 15 V
Receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −30 V to 30 V
Output voltage range (driver), VO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −15 V to 15 V
Continuous total power dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Dissipation Rating Table
Operating free-air temperature range, TA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C
Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65°C to 150°C
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C
†
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTE 1: All voltage values are with respect to network ground terminal.
DISSIPATION RATING TABLE
PACKAGE
2
TA ≤ 25
25°C
C
POWER RATING
DERATING FACTOR
ABOVE TA = 25°C
TA = 70
70°C
C
POWER RATING
D
725 mW
5.8 mW/°C
464 mW
P
1000 mW
8.0 mW/°C
640 mW
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
SN75155
LINE DRIVER AND RECEIVER
SLLS017C − JULY 1986 − REVISED MAY 1995
recommended operating conditions
MIN
NOM
MAX
UNIT
Supply voltage, VCC +
4.5
12
15
V
Supply voltage, VCC −
−4.5
−12
−15
V
± 15
V
25
V
Output voltage, driver, VO(D)
Input voltage, receiver, VI(R)
−25
High-level input voltage, driver, VIH
2
V
Low-level input voltage, driver, VIL
Response control current
Output current, receiver, IO(R)
Operating free-air temperature, TA
0
0.8
V
± 5.5
mA
24
mA
70
°C
electrical characteristics over recommended operating free-air temperature range (unless
otherwise noted)
total device
PARAMETER
ICCH +
ICCL +
ICC +
ICCH −
ICCL −
†
High-level
High
level supply current
Low-level
Low
level supply current
Supply current
High-level
High
level supply current
Low-level supply
pp y current
TEST CONDITIONS
VCC + = 5 V,
VCC − = − 5 V
VCC + = 9 V,
VCC − = − 9 V
VCC + = 12 V,
VCC − = − 12 V
VCC + = 5 V,
VCC − = − 5 V
VCC + = 9 V,
VCC − = − 9 V
VCC + = 12V,
VCC − = − 12 V
VCC + = 5 V,
VCC − = 0
VCC + = 9 V,
VCC − = 0
VCC + = 5 V,
VCC − = − 5 V
VCC + = 9 V,
VCC − = − 9 V
VCC + = 12 V,
VCC − = − 12 V
VCC + = 5 V,
VCC − = − 5 V
VCC + = 9 V,
VCC − = − 9 V
VCC + = 12 V,
VCC − = − 12 V
MIN
VI(D) = 2 V,
VI(R) = 2.3 V,
Output open
TYP†
MAX
6.3
8.1
9.1
11.9
10.4
14
VI(D) = 0.8 V,
VI(R) = 0.6 V,
Output open
2.5
3.4
3.7
5.1
4.1
5.6
VI(R) = 2.3 V,
VI(D) = 0
4.8
6.4
6.7
9.1
VI(D) = 2 V,
VI(R) = 2.3 V
Output open
−2.4
−3.1
−3.9
−4.9
−4.8
−6.1
VI(D) = 0.8 V,
VI(R) = 0.6 V,
Output open
−0.2
−0.35
−0.25
−0.4
−0.27
−0.45
UNIT
mA
mA
mA
mA
mA
All typical values are at TA = 25°C.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
3
SN75155
LINE DRIVER AND RECEIVER
SLLS017C − JULY 1986 − REVISED MAY 1995
electrical characteristics over recommended operating free-air temperature range, VCC + = 12 V,
VCC − = −12 V (unless otherwise noted)
driver section
PARAMETER
VOH
High-level
High
level output voltage
TEST CONDITIONS
VIL = 0.8 V, RL = 3 kΩ
MIN
TYP†
MAX
UNIT
VCC + = 5 V,
VCC − = − 5 V
3.2
3.7
VCC + = 9 V,
VCC − = − 9 V
6.5
7.2
VCC + = 12 V,
VCC − = − 12 V
8.9
9.8
VCC + = 5 V,
VCC − = − 5 V
−3.6
−3.2
VCC + = 9 V,
VCC − = − 9 V
−7.1
−6.4
VCC + = 12 V,
VCC − = − 12 V
−9.7
−8.8
5
μA
−0.73
−1.2
mA
V
VOL
Low-level
L
l
l output
t t voltage
lt
(see Note 2)
VIH = 2 V,
IIH
High-level input current
VI = 7 V
IIL
Low-level input current
VI = 0
IOS(H)
High level short-circuit
High-level
short circuit
output current
0.8
8V
V,
VI = 0
VO = 0
−7
7
−12
12
−14.5
14 5
mA
IOS(L)
Low level short
Low-level
short-circuit
circuit
output current
V
VI = 2 V,
VO = 0
65
6.5
11 5
11.5
15
mA
rO
Output resistance
with power off
VO = − 2 V to 2 V
RL = 3 kΩ
V
Ω
300
receiver section (see Figure 1)
PARAMETER
TEST CONDITIONS
MIN
TYP†
MAX
UNIT
VIT +
Positive-going input threshhold voltage
1.2
1.9
2.3
V
VIT −
Negative-going input threshhold
voltage
0.6
0.95
1.2
V
Vhys
Hystresis voltage (VIT + − VIT −)
VO(H)
VO(L)
IIH
0.6
VI = 0.6 V,
IOH = 10 μA
VCC − = − 5 V
3.7
4.1
4.5
VCC + = 12 V,
VCC − = − 12 V
4.4
4.7
5.2
VI = 0.6 V,
IOH = 0.4 mA
VCC + = 5 V,
VCC − = − 5 V
3.1
3.4
3.8
VCC + = 12 V,
VCC − = − 12 V
3.6
4
4.5
VI = 2.3 V,
IOL = 24 mA
0.2
0.3
V
6.7
10
mA
High level output voltage
High-level
Low-level output voltage
High level input current
High-level
IIL
Low level input current
Low-level
IOS
Short-circuit output current
V
VCC + = 5 V,
VI = 2 5 V
3.6
V
VI = 3 V
0.43
0.67
1
mA
VI = − 25 V
−3.6
−6.7
−10
mA
VI = − 3 V
−0.43
−0.67
−1
mA
−2.8
−3.7
mA
VI = 0.6 V
†
All typical values are at TA = 25°C.
NOTE 2: The algebraic limit system, in which the more positive (less negative) limit is designated as maximum, is used in this data sheet for logic
voltage levels only (e.g., if − 8.8 V is the maximum, the typical value is a more negative value).
4
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
SN75155
LINE DRIVER AND RECEIVER
SLLS017C − JULY 1986 − REVISED MAY 1995
switching characteristics over recommended operating free-air temperature range, VCC + = 5 V,
VCC − = − 5 V, CL = 50 pF (unless otherwise noted)
driver section (see Figure 2)
PARAMETER
TEST CONDITIONS
tPLH
Propagation delay time, low- to high level output
tPHL
Propagation delay time, high- to low level output
tr
Output rise time
tf
MIN
RL = 3 kΩ
RL = 3 kΩ
RL = 3 kΩ to 7 kΩ,
CL = 2500 pF
RL = 3 kΩ
Output fall time
RL = 3 kΩ to 7 kΩ,
CL = 2500 pF
TYP†
MAX
250
480
80
150
67
180
ns
2.4
3
μs
48
160
ns
1.9
3
μs
TYP†
MAX
175
245
37
100
UNIT
ns
receiver section (see Figure 3)
PARAMETER
†
TEST CONDITIONS
MIN
UNIT
tPLH
Propagation delay time, low- to high level output
tPHL
Propagation delay time, high- to low level output
tr
Output rise time
RL = 400 Ω
255
360
ns
tf
Output fall time
RL = 400 Ω
23
50
ns
RL = 400 Ω
ns
All typical values are at TA = 25°C.
PARAMETER MEASUREMENT INFORMATION
VCC
VIT, VI
−IOH
Response
Control
+ IOL
VOH
VOL
Open
Unless
Otherwise
Specified
RC
RC
CC
−VC
+ VC
Figure 1. Receiver Section Test Circuit (VIT +, VIT −, VOH, VOL)
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5
SN75155
LINE DRIVER AND RECEIVER
SLLS017C − JULY 1986 − REVISED MAY 1995
PARAMETER MEASUREMENT INFORMATION
3V
Input
1.5 V
1.5 V
See Note B
0V
Output
Input
tPLH
tPHL
RL = 3 kΩ
CL = 50 pF
(see Note A)
90%
90%
Output
50%
10%
50%
10%
VOH
VOL
tf
tr
VOLTAGE WAVEFORMS
TEST CIRCUIT
NOTES: A. CL includes probe and jig capacitance.
B. The input waveform is supplied by a generator with the following characteristics: ZO = 50 Ω, tw = 1 μs, tr ≤ 10 ns, tf ≤ 10 ns.
Figure 2. Driver Section Switching Test Circuit and Voltage Waveforms
Output
Response
Control
5V
RL = 400 Ω
Input
4V
Input
2V
2V
See Note B
0V
tPHL
CL = 50 pF
(see Note A)
tPLH
90%
90%
1.5 V
10%
Output
1.5 V
10%
VOL
tr
tf
TEST CIRCUIT
VOH
VOLTAGE WAVEFORMS
NOTES: A. CL includes probe and jig capacitance.
B. The input waveform is supplied by a generator with the following characteristics: ZO = 50 Ω, tw = 1 μs, tr ≤ 10 ns, tf ≤ 10 ns.
Figure 3. Receiver Section Switching Test Circuit and Voltage Waveforms
6
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
SN75155
LINE DRIVER AND RECEIVER
SLLS017C − JULY 1986 − REVISED MAY 1995
TYPICAL CHARACTERISTICS
DRIVER
DRIVER
OUTPUT CURRENT
vs
OUTPUT VOLTAGE
VOLTAGE TRANSFER CHARACTERISTICS
10
VCC ± = ± 12 V
8
TA = 25°C
VCC ± = ± 9 V
6
IIO
O − Output Current − mA
VO − Output Voltage −V
20
TA = 25°C
RL = 3 kΩ
4
VCC ± = ± 5 V
2
0
−2
16
VCC± = ± 5 V
12
ÁÁÁÁ
ÁÁÁÁ
8
4
0
ÁÁÁ
VI = 2 V
−4
ÁÁ
ÁÁ
−4
−6
−8
3-kΩ
Load Line
−12
−8
VCC± = ± 12 V
−16
−10
1
1.2
1.4
1.6
VI − Input Voltage − V
1.8
−20
−20 −16 −12 −8 −4 0
4
8
12
VO − Output Voltage − V
2
SLEW RATE
vs
LOAD CAPACITANCE
SHORT-CIRCUIT OUTPUT CURRENT
vs
FREE-AIR TEMPERATURE
400
VI = H
Rise
0
−5
100
40
10
4
IOS(H)
−10
VCC + = 12 V
VCC − = − 12 V
TA = 25°C
Fall
Slew Rate − V/μ s
IIOS
OS − Short-Circuit Output Current − mA
IOS(L)
5
ÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁÁ
1000
15
VCC + = 12 V
VCC − = − 12 V
VO = 0
20
DRIVER
DRIVER
10
16
Figure 5
Figure 4
Á
Á
VI = 0.8 V
VI = L
1
−15
0
10
20
30
40
50
60
TA − Free-Air Temperature − _C
70
10
Figure 6
100
1000
CL − Load Capacitance − pF
10000
Figure 7
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
7
SN75155
LINE DRIVER AND RECEIVER
SLLS017C − JULY 1986 − REVISED MAY 1995
TYPICAL CHARACTERISTICS
RECEIVER
OUTPUT VOLTAGE
vs
INPUT VOLTAGE
RC = 3.9 kΩ
VS = 5 V
VO − Output Voltage − V
VO
5
RC = 20 kΩ
VS = − 5 V
RC = Open
VCC + = 12 V
VCC − = − 12 V
TA = 25°C
4
3
ÁÁ
ÁÁ
VIT +
2
VIT +
VIT −
VIT −
VIT +
VIT −
1
0
−5
−4
−3
−2
−1
0
1
2
3
4
5
VI − Input Voltage − V
Figure 8
RECEIVER
OUTPUT VOLTAGE
vs
INPUT VOLTAGE
RC = 10 kΩ
VS = 5 V
VO − Output Voltage − V
VO
5
RC = 20 kΩ
VS = − 12 V
RC = Open
VCC + = 12 V
VCC − = − 12 V
TA = 25°C
4
3
ÁÁÁ
ÁÁÁ
VIT +
2
VIT +
VIT −
VIT −
VIT +
VIT −
1
0
−5
−4
−3
−2
−1
0
1
VI − Input Voltage − V
Figure 9
8
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
2
3
4
5
SN75155
LINE DRIVER AND RECEIVER
SLLS017C − JULY 1986 − REVISED MAY 1995
TYPICAL CHARACTERISTICS
RECEIVER
RECEIVER
INPUT THRESHOLD VOLTAGE
vs
FREE-AIR TEMPERATURE
INPUT CURRENT
vs
INPUT VOLTAGE
ÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁÁ
3
10
VCC + = 12 V
VCC − = − 12 V
8
IIII − Input Current − mA
6
VIT +
2
1.5
VIT −
1
4
TA = 25°C
VCC + = 12 V
VCC − = − 12 V
2
0
−2
−4
−6
0.5
−8
0
0
10
20
30
40
50
60
70
−10
−25 −20 −15 −10 −5
TA − Free-Air Temperature − °C
0
5
10
15
20
25
VI − Input Voltage − V
Figure 10
Figure 11
RECEIVER
NOISE REJECTION
9
VCC + = 12 V
VCC − = − 12 V
TA = 25°C
8
Input Threshold Voltage − V
Input Threshold Voltage − V
2.5
ÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁÁ
7
CC = 1000 pF
CC = 500 pF
CC = 300 pF
CC = 100 pF
CC = 10 pF
6
5
4
3
2
1
0
10
100
1000
10000
tw − Pulse Duration − ns
Figure 12
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
9
PACKAGE OPTION ADDENDUM
www.ti.com
13-Aug-2021
PACKAGING INFORMATION
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
(2)
Lead finish/
Ball material
MSL Peak Temp
Op Temp (°C)
Device Marking
(3)
(4/5)
(6)
SN75155D
ACTIVE
SOIC
D
8
75
RoHS & Green
NIPDAU
Level-1-260C-UNLIM
0 to 70
75155
SN75155DR
ACTIVE
SOIC
D
8
2500
RoHS & Green
NIPDAU
Level-1-260C-UNLIM
0 to 70
75155
SN75155DRE4
ACTIVE
SOIC
D
8
2500
RoHS & Green
NIPDAU
Level-1-260C-UNLIM
0 to 70
75155
SN75155P
ACTIVE
PDIP
P
8
50
RoHS & Green
NIPDAU
N / A for Pkg Type
0 to 70
SN75155P
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance
do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may
reference these types of products as "Pb-Free".
RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption.
Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of