SLRS022A − DECEMBER 1976 − REVISED OCTOBER 1995
PERIPHERAL DRIVERS FOR
HIGH-VOLTAGE, HIGH-CURRENT DRIVER
APPLICATIONS
•
•
•
•
1A
1B
1Y
GND
LOGIC
SN55461
AND
FK, JG
SN55462
NAND
FK, JG
SN55463
OR
FK, JG
SN75461
AND
D, P
SN75462
NAND
D, P
SN75463
OR
D, P
8
2
7
3
6
4
5
VCC
2B
2A
2Y
SN55461, SN55462, SN55463 . . . FK PACKAGE
(TOP VIEW)
NC
1B
NC
1Y
NC
SUMMARY OF SERIES 55461/75461
DEVICE
1
NC
1A
NC
VCC
NC
•
•
Characterized for Use to 300 mA
High-Voltage Outputs
No Output Latch-Up at 30 V (After
Conducting 300 mA)
Medium-Speed Switching
Circuit Flexibility for Varied Applications
and Choice of Logic Function
TTL-Compatible Diode-Clamped Inputs
Standard Supply Voltages
Plastic DIP (P) With Copper Lead Frame for
Cooler Operation and Improved Reliability
Package Options Include Plastic Small
Outline Packages, Ceramic Chip Carriers,
and Standard Plastic and Ceramic 300-mil
DIPs
4
3 2 1 20 19
18
5
17
6
16
7
15
8
14
9 10 11 12 13
NC
2B
NC
2A
NC
NC
GND
NC
2Y
NC
•
•
•
SN55461, SN55462, SN55463 . . . JG PACKAGE
SN75461, SN75462, SN75463 . . . D OR P PACKAGE
(TOP VIEW)
PACKAGES
NC − No internal connection
description
These dual peripheral drivers are functionally interchangeable with SN55451B through SN55453B and
SN75451B through SN75453B peripheral drivers, but are designed for use in systems that require higher
breakdown voltages than those devices can provide at the expense of slightly slower switching speeds. Typical
applications include logic buffers, power drivers, relay drivers, lamp drivers, MOS drivers, line drivers, and
memory drivers.
The SN55461/SN75461, SN55462/SN75462, and SN55463/SN75463 are dual peripheral AND, NAND, and
OR drivers respectively (assuming positive logic), with the output of the gates internally connected to the bases
of the npn output transistors.
Series SN55461 drivers are characterized for operation over the full military temperature range of − 55°C
to 125°C. Series SN75461 drivers are characterized for operation from 0°C to 70°C.
Copyright 1995, Texas Instruments Incorporated
! "#$ ! %#&'" ($)
(#"! " !%$""! %$ *$ $! $+! !#$!
!(( ,-) (#" %"$!!. ($! $"$!!'- "'#($
$!. '' %$$!)
• DALLAS, TEXAS 75265
• HOUSTON, TEXAS 77251−1443
POST OFFICE BOX 655303
POST OFFICE BOX 1443
1
SLRS022A − DECEMBER 1976 − REVISED OCTOBER 1995
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)†
SN55’
Supply voltage, VCC (see Note 1)
SN75’
UNIT
7
7
V
Input voltage, VI
5.5
5.5
V
Intermitter voltage (see Note 2)
5.5
5.5
V
Off-state output voltage, VO
35
35
V
Continuous collector or output current (see Note 3)
400
400
mA
Peak collector or output current (tw ≤ 10 ms, duty cycle ≤ 50%, see Note 4)
500
500
mA
Continuous total power dissipation
See Dissipation Rating Table
Operating free-air temperature range, TA
Storage temperature range, Tstg
−55 to 125
0 to 70
°C
−65 to 150
−65 to 150
°C
Case temperature for 60 seconds, TC
FK package
260
°C
Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds
JG package
300
°C
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds
D or P package
260
°C
† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. Voltage values are with respect to network GND unless otherwise specified.
2. This is the voltage between two emitters A and B.
3. This value applies when the base-emitter resistance (RBE) is equal to or less than 500 Ω.
4. Both halves of these dual circuits may conduct rated current simultaneously; however, power dissipation averaged over a short time
interval must fall within the continuous dissipation rating.
DISSIPATION RATING TABLE
PACKAGE
TA ≤ 25°C
25 C
POWER RATING
D
725 mW
FK
JG
P
DERATING FACTOR
ABOVE TA = 25°C
TA = 70
70°C
C
POWER RATING
TA = 125
125°C
C
POWER RATING
5.8 mW/°C
464 mW
−
1375 mW
11.0 mW/°C
880 mW
275 mW
1050 mW
8.4 mW/°C
672 mW
210 mW
1000 mW
8.0 mW/°C
640 mW
−
recommended operating conditions
SN55’
Supply voltage, VCC
High-level input voltage, VIH
MIN
NOM
MAX
MIN
NOM
MAX
4.5
5
5.5
4.75
5
5.25
2
Low-level input voltage, VIL
2
0.8
Operating free-air temperature, TA
2
SN75’
−55
•
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443
•
125
0
UNIT
V
V
0.8
V
70
°C
SLRS022A − DECEMBER 1976 − REVISED OCTOBER 1995
logic symbol†
1A
1B
2A
2B
logic diagram (positive logic)
1
&
2
3
6
5
7
1Y
1A
1B
2Y
2A
2B
† This symbol is in accordance with ANSI/IEEE Std 91-1984
and IEC Publication 617-12.
Pin numbers shown are for D, JG, and P packages.
B
Y
L
L
L (on state)
L (on state)
L
H
H
L
L (on state)
H
H
H (off state)
1Y
2
5
6
2Y
7
4
GND
schematic (each driver)
FUNCTION TABLE
(each driver)
A
3
1
VCC
4 kΩ
1.6 kΩ
130 Ω
Y
A
positive logic:
Y = AB or A + B
B
500 Ω
1 kΩ
GND
Resistor values shown are nominal.
electrical characteristics over recommended operating free-air temperature range
TEST CONDITIONS†
PARAMETER
VIK
IOH
VOL
MIN
Input clamp voltage
VCC = MIN,
II = − 12 mA
High-level output current
VCC = MIN,
VOH = 35 V
VIH = MIN,
Low-level output voltage
II
IIH
Input current at maximum input voltage
IIL
ICCH
Low-level input current
High-level input current
SN55461
TYP‡ MAX
−1.2
MIN
SN75461
TYP‡
MAX
−1.5
−1.2
300
−1.5
V
100
µA
A
VCC = MIN, VIL = 0.8 V,
IOL = 100 mA
0.25
0.5
0.25
0.4
VCC = MIN, VIL = 0.8 V,
IOL = 300 mA
0.5
0.8
0.5
0.7
VCC = MAX,
VCC = MAX,
VI = 5.5 V
VI = 2.4 V
VCC = MAX,
VCC = MAX,
VI = 0.4 V
VI = 5 V
UNIT
V
1
1
mA
40
40
µA
−1
−1.6
−1
−1.6
mA
8
11
8
11
mA
ICCL
Supply current, outputs low
VCC = MAX, VI = 0
56
76
56
† For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions.
‡ All typical values are at VCC = 5 V, TA = 25°C.
76
mA
Supply current, outputs high
switching characteristics, VCC = 5 V, TA = 25°C
PARAMETER
TEST CONDITIONS
tPLH
tPHL
Propagation delay time, low-to-high-level output
tTLH
tTHL
Transition time, low-to-high-level output
VOH
Propagation delay time, high-to-low-level output
IO ≈ 200 mA,
RL = 50 Ω,,
MIN
CL = 15 pF,
See Figure 1
Transition time, high-to-low-level output
High-level output voltage after switching
SN55461
VS = 30 V,
See Figure 2
SN75461
•
•
MAX
30
55
25
40
8
20
10
20
VS −10
IO ≈ 300 mA,
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443
TYP
VS −10
UNIT
ns
mV
3
SLRS022A − DECEMBER 1976 − REVISED OCTOBER 1995
logic symbol†
1A
1B
2A
2B
logic diagram (positive logic)
1
&
2
3
6
5
7
1Y
1A
1B
2Y
2A
2B
3
1
2
5
6
4
Y
L
L
H (off state)
L
H
H (off state)
H
L
H (off state)
H
H
L (on state)
GND
schematic (each driver)
FUNCTION TABLE
(each driver)
B
2Y
7
† This symbol is in accordance with ANSI/IEEE Std 91-1984
and IEC Publication 617-12.
Pin numbers shown are for D, JG, and P packages.
A
1Y
VCC
1.6 kΩ
1.6 kΩ
4 kΩ
130 Ω
Y
A
positive logic:
Y = AB or A + B
B
1 kΩ
500 Ω
1 kΩ
GND
Resistor values shown are nominal.
electrical characteristics over recommended operating free-air temperature range
TEST CONDITIONS†
PARAMETER
VIK
IOH
VOL
Input clamp voltage
VCC = MIN,
II = − 12 mA
High-level output current
VCC = MIN,
VOH = 35 V
VIL = 0.8 V,
Low-level output voltage
II
IIH
Input current at maximum input voltage
IIL
ICCH
Low-level input current
High-level input current
MIN
SN55462
TYP‡
MAX
−1.2
MIN
SN75462
TYP‡
MAX
−1.5
−1.2
300
−1.5
V
100
µA
A
VCC = MIN, VIH = MIN,
IOL = 100 mA
0.25
0.5
0.25
0.4
VCC = MIN, VIH = MIN,
IOL = 300 mA
0.5
0.8
0.5
0.7
VCC = MAX,
VCC = MAX,
VI = 5.5 V
VI = 2.4 V
VCC = MAX,
VCC = MAX,
VI = 0.4 V
VI = 0
UNIT
V
1
1
40
40
mA
µA
−1.1
−1.6
−1.1
−1.6
mA
13
17
13
17
mA
ICCL Supply current, outputs low
VCC = MAX, VI = 5 V
61
76
61
† For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions.
‡ All typical values are at VCC = 5 V, TA = 25°C.
76
mA
Supply current, outputs high
switching characteristics, VCC = 5 V, TA = 25°C
PARAMETER
TEST CONDITIONS
tPLH
tPHL
Propagation delay time, low-to-high-level output
tTLH
tTHL
Transition time, low-to-high-level output
VOH
4
Propagation delay time, high-to-low-level output
IO ≈ 200 mA,
RL = 50 Ω,,
CL = 15 pF,
See Figure 1
VS = 30 V,
See Figure 2
IO ≈ 300 mA,
MIN
Transition time, high-to-low-level output
High-level output voltage after switching
SN55462
SN75462
•
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443
•
TYP
MAX
45
65
30
50
13
25
10
20
VS −10
VS −10
UNIT
ns
mV
SLRS022A − DECEMBER 1976 − REVISED OCTOBER 1995
logic symbol†
1A
1B
2A
2B
logic diagram (positive logic)
1
≥1
2
3
6
5
7
1Y
1A
5
6
2A
4
† This symbol is in accordance with ANSI/IEEE Std 91-1984
and IEC Publication 617-12.
Pin numbers shown are for D, JG, and P packages.
B
Y
L
L (on state)
L
H
H (off state)
H
L
H (off state)
H
H
GND
schematic (each driver)
FUNCTION TABLE
(each driver)
L
2Y
7
2B
A
1Y
2
1B
2Y
3
1
VCC
4 kΩ
1.6 kΩ
130 Ω
4 kΩ
Y
A
H (off state)
positive logic:
Y = A + B or A B
B
500 Ω
1 kΩ
GND
Resistor values shown are nominal.
electrical characteristics over recommended operating free-air temperature range
TEST CONDITIONS†
PARAMETER
VIK
IOH
VOL
Input clamp voltage
VCC = MIN,
II = − 12 mA
High-level output current
VCC = MIN,
VOH = 35 V
VIH = MIN,
Low-level output voltage
II
IIH
Input current at maximum input voltage
IIL
ICCH
Low-level input current
High-level input current
MIN
SN55463
MAX
TYP‡
−1.2
MIN
SN75463
MAX
TYP‡
−1.5
−1.2
300
−1.5
V
100
µA
A
VCC = MIN, VIL = 0.8 V,
IOL = 100 mA
0.25
0.5
0.25
0.4
VCC = MIN, VIL = 0.8 V,
IOL = 300 mA
0.5
0.8
0.5
0.7
VCC = MAX,
VCC = MAX,
VI = 5.5 V
VI = 2.4 V
VCC = MAX,
VCC = MAX,
VI = 0.4 V
VI = 5 V
UNIT
V
1
1
mA
40
40
µA
−1
−1.6
−1
−1.6
mA
8
11
8
11
mA
ICCL Supply current, outputs low
VCC = MAX, VI = 0
58
76
58
† For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions.
‡ All typical values are at VCC = 5 V, TA = 25°C.
76
mA
Supply current, outputs high
switching characteristics, VCC = 5 V, TA = 25°C
PARAMETER
TEST CONDITIONS
tPLH
tPHL
Propagation delay time, low-to-high-level output
tTLH
tTHL
Transition time, low-to-high-level output
VOH
Propagation delay time, high-to-low-level output
IO ≈ 200 mA,
RL = 50 Ω,,
CL = 15 pF,
See Figure 1
VS = 30 V,
See Figure 2
IO ≈ 300 mA,
MIN
Transition time, high-to-low-level output
High-level output voltage after switching
SN55463
SN75463
•
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443
•
TYP
MAX
30
55
25
40
8
25
10
25
VS −10
VS −10
UNIT
ns
mV
5
SLRS022A − DECEMBER 1976 − REVISED OCTOBER 1995
PARAMETER MEASUREMENT INFORMATION
≤ 10 ns
≤ 5 ns
Input
2.4 V
10 V
RL = 50 Ω
’461
’462
Output
Pulse
Generator
(see Note A)
90%
1.5 V
Input
’461
’463
Circuit
Under
Test
(see Note B)
10%
10%
0V
0.5 µs
≤ 5 ns
Input
’462
CL = 15 pF
(see Note B)
90%
1.5 V
≤ 10 ns
3V
90%
1.5 V
10%
10%
tPHL
GND
’463
tPLH
90%
SUB
3V
90%
1.5 V
90%
50%
10%
Output
0V
VOH
50%
10%
VOL
0.4 V
tTLH
tTHL
VOLTAGE WAVEFORMS
TEST CIRCUIT
NOTES: A. The pulse generator has the following characteristics: PRR ≤ 1 MHz, ZO ≈ 50 Ω.
B. CL includes probe and jig capacitance.
Figure 1. Test Circuit and Voltage Waveforms for Switching Times
≤ 5 ns
VS = 30 V
Input
2.4 V
’461
’462
Input
’461
’463
2 mH
5V
90%
90%
1.5 V
Circuit
Under
Test
(see Note B)
10%
CL = 15 pF
(see Note B)
10%
0V
40 µs
≤ 5 ns
90%
Input
’462
3V
1.5 V
65 Ω
1N3064
Output
Pulse
Generator
(see Note A)
≤ 10 ns
1.5 V
≤ 10 ns
3V
90%
1.5 V
10%
10%
0V
VOH
’463
GND
SUB
Output
VOL
0.4 V
VOLTAGE WAVEFORMS
TEST CIRCUIT
NOTES: A. The pulse generator has the following characteristics: PRR ≤ 12.5 kHz, ZO = 50 Ω .
B. CL includes probe and jig capacitance.
Figure 2. Test Circuit and Voltage Waveforms for Latch-Up Test
6
•
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443
•
PACKAGE OPTION ADDENDUM
www.ti.com
16-Aug-2022
PACKAGING INFORMATION
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
(2)
Lead finish/
Ball material
MSL Peak Temp
Op Temp (°C)
Device Marking
(3)
Samples
(4/5)
(6)
JM38510/12908BPA
ACTIVE
CDIP
JG
8
1
Non-RoHS
& Green
SNPB
N / A for Pkg Type
-55 to 125
JM38510
/12908BPA
Samples
M38510/12908BPA
ACTIVE
CDIP
JG
8
1
Non-RoHS
& Green
SNPB
N / A for Pkg Type
-55 to 125
JM38510
/12908BPA
Samples
SN75462D
ACTIVE
SOIC
D
8
75
RoHS & Green
NIPDAU
Level-1-260C-UNLIM
0 to 70
75462
Samples
SN75462DR
ACTIVE
SOIC
D
8
2500
RoHS & Green
NIPDAU
Level-1-260C-UNLIM
0 to 70
75462
Samples
SN75462P
ACTIVE
PDIP
P
8
50
RoHS & Green
NIPDAU
N / A for Pkg Type
0 to 70
SN75462P
Samples
SN75462PE4
ACTIVE
PDIP
P
8
50
RoHS & Green
NIPDAU
N / A for Pkg Type
0 to 70
SN75462P
Samples
SN75463P
ACTIVE
PDIP
P
8
50
RoHS & Green
NIPDAU
N / A for Pkg Type
0 to 70
SN75463P
Samples
SNJ55462FK
ACTIVE
LCCC
FK
20
1
Non-RoHS
& Green
SNPB
N / A for Pkg Type
-55 to 125
SNJ55
462FK
Samples
SNJ55462JG
ACTIVE
CDIP
JG
8
1
Non-RoHS
& Green
SNPB
N / A for Pkg Type
-55 to 125
SNJ55462JG
Samples
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance
do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may
reference these types of products as "Pb-Free".
RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption.
Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of