SN75472DG4

SN75471 THRU SN75473 DUAL PERIPHERAL DRIVERS SLRS024 – DECEMBER 1976 – REVISED MAY 1990 D OR P PACKAGE (TOP VIEW) PERIPHERAL DRIVERS FOR HIGH-VOLTAGE HIGH-CURRENT DRIVER APPLICATIONS D D D D D D D D Characterized for Use to 300 mA High-Voltage Outputs No Output Latch-Up at 55 V (After Conducting 300 mA) Medium-Speed Switching Circuit Flexibility for Varied Applications and Choice of Logic Function TTL-Compatible Diode-Clamped Inputs Standard Supply Voltages Plastic DIP (P) With Copper Lead Frame Provides Cooler Operation and Improved Reliability 1A 1B 1Y GND 1 8 2 7 3 6 4 5 VCC 2B 2A 2Y SUMMARY OF SERIES SN75471 DEVICE LOGIC OF PACKAGES COMPLETE CIRCUIT SN75471 SN75472 SN75473 AND NAND OR D, P D, P D, P description Series SN75471 dual peripheral drivers are functionally interchangeable with series SN75451B and series SN75461 peripheral drivers, but are designed for use in systems that require higher breakdown voltages than either of those series can provide at the expense of slightly slower switching speeds than series 75451B (limits are the same as series SN75461). Typical applications include high-speed logic buffers, power drivers, relay drivers, lamp drivers, MOS drivers, line drivers, and memory drivers. The SN75471, SN75472, and SN75473 are dual peripheral AND, NAND, and OR drivers, respectively, (assuming positive logic), with the output of the logic gates internally connected to the bases of the npn output transistors. Series SN75471 drivers are characterized for operation from 0°C to 70°C. Copyright  1990, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 1 SN75471 THRU SN75473 DUAL PERIPHERAL DRIVERS SLRS024 – DECEMBER 1976 – REVISED MAY 1990 absolute maximum ratings over operating free-air temperature range (unless otherwise noted) Supply voltage, VCC (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V Input voltage, VI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5 V Inter-emitter voltage (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5 V Off-state output voltage, VO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 V Continuous collector or output current (see Note 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400 mA Peak collector or output current (tw ≤ 10 ms, duty cycle ≤ 50%, see Note 3) . . . . . . . . . . . . . . . . . . . . . 500 mA Continuous total power dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Dissipation Rating Table Operating free-air temperature range, TA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 65°C to 150°C Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C NOTES: 1. Voltage values are with respect to the network GND, unless otherwise specified. 2. This is the voltage between two emitters, A and B. 3. Both halves of these dual circuits may conduct rated current simultaneously; however, power dissipation averaged over a short time interval must fall within the continuous dissipation rating. DISSIPATION RATING TABLE PACKAGE TA ≤ 25°C POWER RATING DERATING FACTOR ABOVE TA = 25°C TA = 70°C POWER RATING D 725 mW 5.8 mW/°C 464 mW P 1000 mW 8.0 mW/°C 640 mW recommended operating conditions Supply voltage, VCC High-level input voltage, VIH MIN NOM MAX UNIT 4.75 5 5.25 V 2 Low-level input voltage, VIL Operating free-air temperature, TA 2 0 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 V 0.8 V 70 °C SN75471 THRU SN75473 DUAL PERIPHERAL DRIVERS SLRS024 – DECEMBER 1976 – REVISED MAY 1990 logic symbol† 1A 1B 2A 2B logic diagram (positive logic) 1 & 2 3 1Y 5 7 2Y 5 6 2A 4 † This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12. A B L L (on state) L H L (on state) H L L (on state) H H H (off state) GND SN75471 schematic (each driver) VCC Y L 2Y 7 2B SN75471 FUNCTION TABLE (each driver) 1Y 2 1B 6 3 1 1A 4 kΩ 1.6 kΩ 130 Ω Y A positive logic: Y = AB or A + B B 500 Ω 1 kΩ GND Resistor values shown are nominal. electrical characteristics over recommended operating free-air temperature range SN75471 PARAMETER VIK IOH Input clamp voltage VOL Low level output voltage Low-level II IIH Input current at maximum input voltage IIL ICCH Low-level input current TEST CONDITIONS High-level output current High-level input current Supply current, outputs high ICCL Supply current, outputs low ‡ All typical values are at VCC = 5 V, TA = 25°C. MIN UNIT TYP‡ MAX – 1.2 – 1.5 V 100 µA VCC = 4.75 V, VCC = 4.75 V, II = – 12 mA VIH = 2 V, VCC = 4.75 V, VCC = 4.75 V, VIL = 0.8 V, VIL = 0.8 V, VCC = 5.25 V, VCC = 5.25 V, VI = 5.5 V VI = 2.4 V 40 µA VCC = 5.25 V, VCC = 5.25 V, VI = 0.4 V VI = 5 V –1 – 1.6 mA 7 11 mA VCC = 5.25 V, VI = 0 52 65 mA VOH = 70 V IOL = 100 mA 0.25 0.4 IOL = 300 mA 0.5 0.7 1 V mA switching characteristics, VCC = 5 V, TA = 25°C PARAMETER TEST CONDITIONS tPLH tPHL Propagation delay time, low-to-high-level output tTLH tTHL Transition time, low-to-high-level output VOH Propagation delay time, high-to-low-level output IO ≈ 200 mA,, RL = 50 Ω, CL = 15 pF,, See Figure 1 VS = 55 V, See Figure 2 IO ≈ 300 mA, SN75471 MIN Transition time, high-to-low-level output High level output voltage after switching High-level POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 VS – 18 TYP MAX 30 55 25 40 8 20 10 20 UNIT ns mV 3 SN75471 THRU SN75473 DUAL PERIPHERAL DRIVERS SLRS024 – DECEMBER 1976 – REVISED MAY 1990 logic symbol† 1A 1B 2A 2B logic diagram (positive logic) 1 & 2 3 6 5 7 1Y 1Y 2 1B 2Y 3 1 1A 5 6 2A 2Y 7 2B 4 † This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12. SN75472 FUNCTION TABLE (each driver) A B Y L L H (off state) L H H (off state) H L H (off state) H H L (on state) GND SN75472 schematic (each driver) VCC 1.6 kΩ 1.6 kΩ 4 kΩ 130 Ω Y A positive logic: Y = AB or A + B B 1 kΩ 500 Ω 1 kΩ GND Resistor values shown are nominal. electrical characteristics over recommended operating free-air temperature range PARAMETER VIK IOH TEST CONDITIONS Input clamp voltage VCC = 4.75 V, VCC = 4.75 V, High-level output current VCC = 4.75 V, VCC = 4.75 V, VOL Low level output voltage Low-level II IIH Input current at maximum input voltage IIL ICCH Low-level input current High-level input current VCC = 5.25 V, VCC = 5.25 V, VCC = 5.25 V, VCC = 5.25 V, Supply current, outputs high ICCL Supply current, outputs low ‡ All typical values are at VCC = 5 V, TA = 25°C. VCC = 5.25 V, SN75472 MIN TYP‡ MAX UNIT – 1.2 – 1.5 V 100 µA II = – 12 mA VIH = 2 V, VOH = 70 V VIL= 0.8 V, IOL = 100 mA VIL= 0.8 V, VI = 5.5 V IOL = 300 mA 0.25 0.4 0.5 0.7 1 VI = 2.4 V VI = 0.4 V VI = 5 V VI = 0 V mA 40 µA –1 – 1.6 mA 13 17 mA 61 76 mA switching characteristics, VCC = 5 V, TA = 25°C PARAMETER TEST CONDITIONS tPLH tPHL Propagation delay time, low-to-high-level output tTLH tTHL Transition time, low-to-high-level output VOH 4 Propagation delay time, high-to-low-level output IO ≈ 200 mA,, RL = 50 Ω, CL = 15 pF,, See Figure 1 VS = 55 V, See Figure 2 IO ≈ 300 mA, SN75472 MIN Transition time, high-to-low-level output High level output voltage after switching High-level POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 VS – 18 TYP MAX 45 65 30 50 13 25 10 20 UNIT ns mV SN75471 THRU SN75473 DUAL PERIPHERAL DRIVERS SLRS024 – DECEMBER 1976 – REVISED MAY 1990 logic symbol† 1A 1B 2A 2B logic diagram (positive logic) 1 ≥1 2 6 3 5 7 1Y 1A 1B 2Y 2A 2B † This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12. FUNCTION TABLE (each driver) A B L L L (on state) L H H (off state) L H (off state) H H H (off state) 1Y 2 5 6 2Y 7 4 GND schematic (each driver) VCC Y H 3 1 4 kΩ 1.6 kΩ 130 Ω 4 kΩ Y A positive logic: Y = A + B or A B B 500 Ω 1 kΩ GND Resistor values shown are nominal. electrical characteristics over recommended operating free-air temperature range SN75473 PARAMETER VIK IOH TEST CONDITIONS Input clamp voltage High-level output current VOL Low level output voltage Low-level II IIH Input current at maximum input voltage IIL ICCH Low-level input current High-level input current Supply current, outputs high ICCL Supply current, outputs low ‡ All typical values are at VCC = 5 V, TA = 25°C. MIN UNIT TYP‡ MAX – 1.2 – 1.5 V 100 µA VCC = 4.75 V, VCC = 4.75 V, II = – 12 mA VIH = 2 V, VCC = 4.75 V, VCC = 4.75 V, VIL = 0.8 V, VIL = 0.8 V, VCC = 5.25 V, VCC = 5.25 V, VI = 5.5 V VI = 2.4 V VCC = 5.25 V, VCC = 5.25 V, VI = 0.4 V VI = 5 V –1 VCC = 5.25 V, VI = 0 VOH = 70 V IOL = 100 mA 0.25 0.4 IOL = 300 mA 0.5 0.7 1 V mA 40 µA – 1.6 mA 8 11 mA 58 76 mA switching characteristics, VCC = 5 V, TA = 25°C PARAMETER TEST CONDITIONS tPLH tPHL Propagation delay time, low-to-high-level output tTLH tTHL Transition time, low-to-high-level output VOH Propagation delay time, high-to-low-level output IO ≈ 200 mA,, RL = 50 Ω, CL = 15 pF,, See Figure 1 VS = 55 V, See Figure 2 IO ≈ 300 mA, SN75473 MIN Transition time, high-to-low-level output High level output voltage after switching High-level POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 VS – 18 TYP MAX 30 55 25 40 8 25 10 25 UNIT ns mV 5 SN75471 THRU SN75473 DUAL PERIPHERAL DRIVERS SLRS024 – DECEMBER 1976 – REVISED MAY 1990 PARAMETER MEASUREMENT INFORMATION Input 2.4 V 10 V ≤ 5 ns RL = 50 Ω ’471 ’472 90% Input ’471 ’473 Output Pulse Generator (see Note A) Circuit Under Test GND ’473 ≤ 10 ns 50% 50% 10% CL = 15 pF (see Note B) 10% 0V 0.5 µs ≤ 5 ns SUB 90% Input ’472 ≤ 10 ns 3V 90% 50% 50% 10% 10% tPHL 0.4 V 3V 90% 0V tPLH 90% 90% 50% 10% Output TEST CIRCUIT VOH 50% 10% VOL tTHL tTLH VOLTAGE WAVEFORMS NOTES: A. The pulse generator has the following characteristics: PRR ≤ 1 MHz, ZO ≈ 50 Ω. B. CL includes probe and jig capacitance. Figure 1. Switching Times ≤ 5 ns VS = 55 V ≤ 10 ns 3V 90% Input 2.4 V ’471 ’472 Input ’471 ’473 2 mH 5V GND 50% 10% Input ’472 10% 40 µs ≤ 5 ns Circuit Under Test ’473 50% 180 Ω 1N3064 Output Pulse Generator (see Note A) 90% 90% 50% ≤ 10 ns 3V 90% 50% 10% SUB 0V 10% CL = 15 pF (see Note B) 0V VOH Output VOL 0.4 V TEST CIRCUIT VOLTAGE WAVEFORMS NOTES: A. The pulse generator has the following characteristics: PRR ≤ 12.5 kHz, ZO ≈ 50 Ω. B. CL includes probe and jig capacitance. Figure 2. Latch-Up Test 6 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 PACKAGE OPTION ADDENDUM www.ti.com 10-Dec-2020 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan (2) Lead finish/ Ball material MSL Peak Temp Op Temp (°C) Device Marking (3) (4/5) (6) SN75471D ACTIVE SOIC D 8 75 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 75471 SN75471DR ACTIVE SOIC D 8 2500 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 75471 SN75471P ACTIVE PDIP P 8 50 RoHS & Green NIPDAU N / A for Pkg Type 0 to 70 SN75471P SN75472D ACTIVE SOIC D 8 75 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 75472 SN75472P ACTIVE PDIP P 8 50 RoHS & Green NIPDAU N / A for Pkg Type 0 to 70 SN75472P (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of