SNJ54AS11J

SN54ALS11A, SN54AS11, SN74ALS11A, SN74AS11 TRIPLE 3-INPUT POSITIVE-AND GATES SDAS009D – MARCH 1984 – REVISED NOVEMBER 2002 4.5-V to 5.5-V VCC Operation Max tpd of 5.5 ns at 5 V SN54ALS11A, . . . J OR W PACKAGE SN54AS11 . . . J PACKAGE SN74ALS11A, SN74AS11 . . . D, N, OR NS PACKAGE (TOP VIEW) 1 14 2 13 3 12 4 11 5 10 6 9 7 8 1B 1A NC VCC VCC 1C 1Y 3C 3B 3A 3Y 2A NC 2B NC 2C 4 3 2 1 20 19 18 5 17 6 16 7 15 8 14 9 10 11 12 13 1Y NC 3C NC 3B 2Y GND NC 3Y 3A 1A 1B 2A 2B 2C 2Y GND SN54ALS11A, SN54AS11 . . . FK PACKAGE (TOP VIEW) 1C D D NC – No internal connection description/ordering information These devices contain three independent 3-input positive-AND gates. They perform the Boolean functions Y A • B • C or Y A B C in positive logic. + ) ) + ORDERING INFORMATION PDIP – N 0°C to 70°C SOIC – D SOP – NS –55°C to 125°C ORDERABLE PART NUMBER PACKAGE† TA Tube SN74ALS11AN SN74AS11N SN74AS11N SN74ALS11AD Tape and reel SN74ALS11ADR Tube SN74AS11D Tape and reel SN74AS11DR CDIP – J Tube CFP – W Tube LCCC – FK SN74ALS11AN Tube Tape and reel Tube TOP-SIDE MARKING ALS11A AS11 SN74ALS11ANSR ALS11A SN74AS11NSR 74AS11 SNJ54ALS11AJ SNJ54ALS11AJ SNJ54AS11J SNJ54AS11J SNJ54ALS11AW SNJ54ALS11AW SNJ54ALS11AFK SNJ54ALS11AFK SNJ54AS11FK SNJ54AS11FK † Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Copyright  2002, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. On products compliant to MIL-PRF-38535, all parameters are tested unless otherwise noted. On all other products, production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 1 SN54ALS11A, SN54AS11, SN74ALS11A, SN74AS11 TRIPLE 3-INPUT POSITIVE-AND GATES SDAS009D – MARCH 1984 – REVISED NOVEMBER 2002 FUNCTION TABLE (each gate) INPUTS A B C OUTPUT Y H H H H L X X L X L X L X X L L logic diagram, each gate (positive logic) 1A 1B 1C 2A 2B 2C 3A 3B 3C 1 2 13 12 3 4 5 6 9 10 11 8 1Y 2Y 3Y Pin numbers shown are for the D, J, N, NS, and W packages. absolute maximum ratings over operating SN74ALS11A) (unless otherwise noted)† free-air temperature range (SN54ALS11A, Supply voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V Input voltage, VI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V Package thermal impedance, θJA (see Note 1): D package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86°C/W N package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80°C/W NS package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76°C/W Storage temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65°C to 150°C † Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTE 1: The package thermal impedance is calculated in accordance with JESD 51-7. recommended operating conditions (see Note 2) SN54ALS11A VCC VIH Supply voltage High-level input voltage SN74ALS11A MIN NOM MAX MIN NOM MAX 4.5 5 5.5 4.5 5 5.5 2 2 UNIT V V VIL Low level input voltage Low-level 0.8‡ 0.7§ IOH IOL High-level output current –0.4 –0.4 mA Low-level output current 4 8 mA 0.8 V TA Operating free-air temperature –55 125 0 70 °C ‡ Applies over temperature range –55°C to 70°C § Applies over temperature range 70°C to 125°C NOTE 2: All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, literature number SCBA004. 2 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 SN54ALS11A, SN54AS11, SN74ALS11A, SN74AS11 TRIPLE 3-INPUT POSITIVE-AND GATES SDAS009D – MARCH 1984 – REVISED NOVEMBER 2002 electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER VIK VOH SN54ALS11A TYP† MAX TEST CONDITIONS VCC = 4.5 V, VCC = 4.5 V to 5.5 V, II = –18 mA IOH = –0.4 mA VOL 5V VCC = 4 4.5 IOL = 4 mA IOL = 8 mA II IIH VCC = 5.5 V, VCC = 5.5 V, VI = 7 V VI = 2.7 V IIL IO‡ VCC = 5.5 V, VCC = 5.5 V, VI = 0.4 V VO = 2.25 V ICCH ICCL VCC = 5.5 V, VCC = 5.5 V, VI = 4.5 V VI = 0 MIN SN74ALS11A TYP† MAX MIN –1.5 VCC –2 0.25 –1.5 0.4 VCC –2 0.25 0.4 0.35 0.5 V V V 0.1 0.1 mA 20 20 µA –0.1 –20 UNIT –112 –30 –0.1 mA –112 mA mA 1 1.8 1 1.8 1.6 3 1.6 3 mA † All typical values are at VCC = 5 V, TA = 25°C. ‡ The output conditions have been chosen to produce a current that closely approximates one half of the true short-circuit output current, IOS. switching characteristics (see Figure 1) PARAMETER FROM (INPUT) TO (OUTPUT) VCC = 4.5 V TO 5.5 V, CL = 50 PF, RL = 500 Ω, TA = MIN TO MAX§ SN54ALS11A MIN tPLH tPHL A B A, B, or C Y UNIT SN74ALS11A MAX MIN MAX 2 14 2 13 2 12.5 2 10 ns § For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions. absolute maximum ratings over operating free-air temperature range (SN54AS11, SN74AS11) (unless otherwise noted)¶ Supply voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V Input voltage, VI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V Package thermal impedance, θJA (see Note 1): D package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86°C/W N package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80°C/W NS package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76°C/W Storage temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65°C to 150°C ¶ Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTE 1: The package thermal impedance is calculated in accordance with JESD 51-7. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 3 SN54ALS11A, SN54AS11, SN74ALS11A, SN74AS11 TRIPLE 3-INPUT POSITIVE-AND GATES SDAS009D – MARCH 1984 – REVISED NOVEMBER 2002 recommended operating conditions (see Note 2) SN54AS11 SN74AS11 MIN NOM MAX MIN NOM MAX 4.5 5 5.5 4.5 5 5.5 UNIT VCC VIH Supply voltage VIL IOH Low-level input voltage 0.8 0.8 V High-level output current –2 –2 mA IOL TA Low-level output current 20 20 mA 70 °C High-level input voltage 2 Operating free-air temperature 2 –55 125 V V 0 NOTE 3: All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, literature number SCBA004. electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS VIK VOH VCC = 4.5 V, VCC = 4.5 V to 5.5 V, II = –18 mA IOH = –2 mA VOL II VCC = 4.5 V, VCC = 5.5 V, IOL = 20 mA VI = 7 V IIH IIL IO‡ VCC = 5.5 V, VCC = 5.5 V, VI = 2.7 V VI = 0.4 V VCC = 5.5 V, VCC = 5.5 V, VO = 2.25 V VI = 4.5 V ICCH ICCL SN54AS11 TYP† MIN SN74AS11 TYP† MAX MIN –1.2 MAX –1.2 VCC–2 VCC–2 0.35 –30 0.5 V V 0.35 0.5 V 0.1 0.1 mA 20 20 µA –0.5 –0.5 mA –112 mA 7 mA –112 4.3 UNIT –30 7 4.3 VCC = 5.5 V, VI = 0 11.2 18 11.2 18 mA † All typical values are at VCC = 5 V, TA = 25°C. ‡ The output conditions have been chosen to produce a current that closely approximates one-half of the true short-circuit output current, IOS. switching characteristics (see Figure 1) PARAMETER tPLH tPHL FROM (INPUT) A B A, B, or C TO (OUTPUT) Y VCC = 4.5 V TO 5.5 V, CL = 50 PF, RL = 500 Ω, TA = MIN TO MAX§ SN54AS11 SN74AS11 MIN MAX MIN 1 6.5 1 6 1 6.5 1 5.5 § For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions. 4 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 UNIT MAX ns SN54ALS11A, SN54AS11, SN74ALS11A, SN74AS11 TRIPLE 3-INPUT POSITIVE-AND GATES SDAS009D – MARCH 1984 – REVISED NOVEMBER 2002 PARAMETER MEASUREMENT INFORMATION SERIES 54ALS/74ALS AND 54AS/74AS DEVICES 7V RL = R1 = R2 VCC S1 RL R1 Test Point From Output Under Test CL (see Note A) From Output Under Test RL Test Point From Output Under Test CL (see Note A) CL (see Note A) LOAD CIRCUIT FOR BI-STATE TOTEM-POLE OUTPUTS LOAD CIRCUIT FOR OPEN-COLLECTOR OUTPUTS 3.5 V Timing Input Test Point LOAD CIRCUIT FOR 3-STATE OUTPUTS 3.5 V High-Level Pulse 1.3 V R2 1.3 V 1.3 V 0.3 V 0.3 V tsu Data Input tw th 3.5 V 1.3 V 3.5 V Low-Level Pulse 1.3 V 0.3 V 1.3 V 0.3 V VOLTAGE WAVEFORMS SETUP AND HOLD TIMES VOLTAGE WAVEFORMS PULSE DURATIONS 3.5 V Output Control (low-level enabling) 1.3 V 1.3 V 0.3 V tPZL Waveform 1 S1 Closed (see Note B) tPLZ tPHZ 1.3 V 1.3 V 0.3 V tPHL ≈3.5 V tPLH VOL 0.3 V VOH 1.3 V 3.5 V Input 1.3 V tPZH Waveform 2 S1 Open (see Note B) 1.3 V 0.3 V ≈0 V VOH In-Phase Output 1.3 V 1.3 V VOL tPLH tPHL VOH Out-of-Phase Output (see Note C) 1.3 V 1.3 V VOL VOLTAGE WAVEFORMS PROPAGATION DELAY TIMES VOLTAGE WAVEFORMS ENABLE AND DISABLE TIMES, 3-STATE OUTPUTS NOTES: A. CL includes probe and jig capacitance. B. Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control. Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control. C. When measuring propagation delay items of 3-state outputs, switch S1 is open. D. All input pulses have the following characteristics: PRR ≤ 1 MHz, tr = tf = 2 ns, duty cycle = 50%. E. The outputs are measured one at a time with one transition per measurement. Figure 1. Load Circuits and Voltage Waveforms POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 5 PACKAGE OPTION ADDENDUM www.ti.com 2-Dec-2023 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan (2) Lead finish/ Ball material MSL Peak Temp Op Temp (°C) Device Marking (3) Samples (4/5) (6) 5962-86841012A ACTIVE LCCC FK 20 55 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 596286841012A SNJ54ALS 11AFK 5962-8684101CA ACTIVE CDIP J 14 25 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 5962-8684101CA SNJ54ALS11AJ Samples 5962-8684101DA ACTIVE CFP W 14 25 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 5962-8684101DA SNJ54ALS11AW Samples 5962-9756101QCA ACTIVE CDIP J 14 25 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 5962-9756101QC A SNJ54AS11J JM38510/37402BCA ACTIVE CDIP J 14 25 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 JM38510/ 37402BCA Samples M38510/37402BCA ACTIVE CDIP J 14 25 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 JM38510/ 37402BCA Samples SN54ALS11AJ ACTIVE CDIP J 14 25 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 SN54ALS11AJ Samples SN54AS11J ACTIVE CDIP J 14 25 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 SN54AS11J Samples Samples Samples SN74ALS11AD LIFEBUY SOIC D 14 50 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 ALS11A SN74ALS11ADR ACTIVE SOIC D 14 2500 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 ALS11A Samples SN74ALS11AN ACTIVE PDIP N 14 25 RoHS & Green NIPDAU N / A for Pkg Type 0 to 70 SN74ALS11AN Samples SN74ALS11ANSR ACTIVE SO NS 14 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 ALS11A Samples SN74AS11D ACTIVE SOIC D 14 50 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 AS11 Samples SN74AS11N ACTIVE PDIP N 14 25 RoHS & Green NIPDAU N / A for Pkg Type 0 to 70 SN74AS11N Samples SNJ54ALS11AFK ACTIVE LCCC FK 20 55 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 596286841012A SNJ54ALS 11AFK SNJ54ALS11AJ ACTIVE CDIP J 14 25 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 5962-8684101CA SNJ54ALS11AJ Addendum-Page 1 Samples Samples PACKAGE OPTION ADDENDUM www.ti.com 2-Dec-2023 Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan (2) Lead finish/ Ball material MSL Peak Temp Op Temp (°C) (3) Device Marking Samples (4/5) (6) SNJ54ALS11AW ACTIVE CFP W 14 25 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 5962-8684101DA SNJ54ALS11AW SNJ54AS11J ACTIVE CDIP J 14 25 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 5962-9756101QC A SNJ54AS11J (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of