SNJ54F245J

SN54F245, SN74F245 OCTAL BUS TRANSCEIVERS WITH 3-STATE OUTPUTS SDFS010A – MARCH 1987 – REVISED OCTOBER 1993 SN54F245 . . . J PACKAGE SN74F245 . . . DB, DW, OR N PACKAGE (TOP VIEW) 3-State Outputs Drive Bus Lines Directly Package Options Include Plastic Small-Outline (SOIC) and Shrink Small-Outline (SSOP) Packages, Ceramic Chip Carriers, and Plastic and Ceramic DIPs DIR A1 A2 A3 A4 A5 A6 A7 A8 GND description These octal bus transceivers are designed for asynchronous communication between data buses. The devices transmit data from the A bus to the B bus or from the B bus to the A bus depending upon the logic level at the direction-control (DIR) input. The output enable (OE) input can be used to disable the device so the buses are effectively isolated. 1 20 2 19 3 18 4 17 5 16 6 15 7 14 8 13 9 12 10 11 VCC OE B1 B2 B3 B4 B5 B6 B7 B8 SN54F245 . . . FK PACKAGE (TOP VIEW) A2 A1 DIR VCC The SN74F245 is available in TI’s shrink small-outline package (DB), which provides the same I/O pin count and functionality of standard small-outline packages in less than half the printed-circuit-board area. A3 A4 A5 A6 A7 4 3 2 1 20 19 18 5 17 6 16 7 15 8 14 9 10 11 12 13 B1 B2 B3 B4 B5 A8 GND B8 B7 B6 The SN54F245 is characterized for operation over the full military temperature range of – 55°C to 125°C. The SN74F245 is characterized for operation from 0°C to 70°C. OE • • FUNCTION TABLE INPUTS OPERATION OE DIR L L B data to A bus L H A data to B bus H X Isolation Copyright  1993, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 2–1 SN54F245, SN74F245 OCTAL BUS TRANSCEIVERS WITH 3-STATE OUTPUTS SDFS010A – MARCH 1987 – REVISED OCTOBER 1993 logic symbol† OE DIR A1 19 1 2 logic diagram (positive logic) DIR G3 1 3EN1[BA] 3EN2[AB] 19 18 1 B1 A1 OE 2 2 A2 A3 A4 A5 A6 A7 A8 3 17 4 16 5 15 6 14 7 13 8 12 9 11 B2 18 B3 B1 B4 B5 B6 B7 To Seven Other Channels B8 † This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12. absolute maximum ratings over operating free-air temperature range (unless otherwise noted)‡ Supply voltage range, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.5 V to 7 V Input voltage range, VI (except I/O ports) (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 1.2 V to 7 V Input current range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 30 mA to 5 mA Voltage range applied to any output in the disabled or power-off state . . . . . . . . . . . . . . . . . . . – 0.5 V to 5.5 V Voltage range applied to any output in the high state . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.5 V to VCC Current into any output in the low state: SN54F245 (A1 thru A8) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 mA SN54F245 (B1 thru B8) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 mA SN74F245 (A1 thru A8) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 mA SN74F245 (B1 thru B8) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128 mA Operating free-air temperature range: SN54F245 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 55°C to 125°C SN74F245 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C Storage temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 65°C to 150°C ‡ Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTE 1: The input voltage ratings may be exceeded provided the input current ratings are observed. 2–2 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 SN54F245, SN74F245 OCTAL BUS TRANSCEIVERS WITH 3-STATE OUTPUTS SDFS010A – MARCH 1987 – REVISED OCTOBER 1993 recommended operating conditions SN54F245 VCC VIH Supply voltage VIL IIK Low-level input voltage IOH High level output current High-level IOL Low level output current Low-level TA Operating free-air temperature High-level input voltage SN74F245 MIN NOM MAX MIN NOM MAX 4.5 5 5.5 4.5 5 5.5 2 2 UNIT V V 0.8 0.8 V – 18 – 18 mA A1 thru A8 –3 –3 B1 thru B8 – 12 – 15 A1 thru A8 20 24 B1 thru B8 48 64 Input clamp current – 55 125 0 70 mA mA °C electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER VIK VCC = 4.5 V, A1 thru A8 VOH 5V VCC = 4 4.5 IIL‡ IOS§ II = – 18 mA IOH = – 1 mA IOH = – 3 mA IOH = – 12 mA 3.4 2.5 3.4 2.4 3.3 2.4 3.3 2 3.2 A1 thru A8 VCC = 4 4.5 5V IOL = 20 mA IOL = 24 mA 0.3 0.5 VCC = 4 4.5 5V IOL = 48 mA IOL = 64 mA 0.38 0.55 5V VCC = 5 5.5 VI = 5.5 V VI = 7 V VCC = 5 5.5 5V V, VI = 2 2.7 7V VCC = 5 5.5 5V V, VI = 0 0.5 5V VCC = 5 5.5 5V V, VO = 0 A and B DIR, OE A and B DIR, OE A1 thru A8 B1 thru B8 IOH = – 15 mA IOH = – 1 mA to – 3 mA 2 3.1 0.35 0.5 0.42 0.55 1 1 0.1 0.1 70 70 20 20 – 0.65 – 0.65 – 1.2 – 1.2 – 60 – 150 – 60 – 150 – 100 – 225 – 100 – 225 70 90 70 90 Outputs low 95 120 95 120 Outputs disabled 85 110 85 † All typical values are at VCC = 5 V, TA = 25°C. ‡ For I/O ports, the parameters IIH and IIL include the off-state output current. § Not more than one output should be shorted at a time, and the duration of the short circuit should not exceed one second. 110 VCC = 5.5 V POST OFFICE BOX 655303 V 2.7 Outputs high ICC UNIT V VCC = 4.75 V, DIR, OE – 1.2 2.5 Any output A and B SN74F245 TYP† MAX MIN – 1.2 VCC = 4 4.5 5V B1 thru B8 IIH‡ MIN B1 thru B8 VOL II SN54F245 TYP† MAX TEST CONDITIONS • DALLAS, TEXAS 75265 V mA µA mA mA mA 2–3 SN54F245, SN74F245 OCTAL BUS TRANSCEIVERS WITH 3-STATE OUTPUTS SDFS010A – MARCH 1987 – REVISED OCTOBER 1993 switching characteristics (see Note 2) PARAMETER FROM (INPUT) TO (OUTPUT) VCC = 5 V, CL = 50 pF, RL = 500 Ω, TA = 25°C VCC = 4.5 V to 5.5 V, CL = 50 pF, RL = 500 Ω, TA = MIN to MAX† ′F245 tPLH tPHL A or B B or A tPZH tPZL OE A or B tPHZ tPLZ OE A or B SN54F245 SN74F245 MIN TYP MAX MIN MAX MIN MAX 1.7 3.8 6 1.2 7.5 1.7 7 1.7 4.2 6 1.2 7.5 1.7 7 2.2 4.9 7 1.7 9 2.2 8 2.7 5.6 8 2.2 10 2.7 9 2.2 4.6 6.5 1.7 9 2.2 7.5 1.2 4.6 6.5 1.2 10 1.2 7.5 † For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions. NOTE 2: Load circuits and waveforms are shown in Section 1. 2–4 POST OFFICE BOX 655303 UNIT • DALLAS, TEXAS 75265 ns ns ns PACKAGE OPTION ADDENDUM www.ti.com 10-Jun-2022 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan (2) Lead finish/ Ball material MSL Peak Temp Op Temp (°C) Device Marking (3) Samples (4/5) (6) 85511012A ACTIVE LCCC FK 20 1 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 85511012A SNJ54F 245FK 8551101RA ACTIVE CDIP J 20 1 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 8551101RA SNJ54F245J Samples 8551101SA ACTIVE CFP W 20 1 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 8551101SA SNJ54F245W Samples JM38510/34803B2A ACTIVE LCCC FK 20 1 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 JM38510/ 34803B2A Samples JM38510/34803BRA ACTIVE CDIP J 20 1 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 JM38510/ 34803BRA Samples JM38510/34803BSA ACTIVE CFP W 20 1 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 JM38510/ 34803BSA Samples M38510/34803B2A ACTIVE LCCC FK 20 1 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 JM38510/ 34803B2A Samples M38510/34803BRA ACTIVE CDIP J 20 1 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 JM38510/ 34803BRA Samples M38510/34803BSA ACTIVE CFP W 20 1 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 JM38510/ 34803BSA Samples SN54F245J ACTIVE CDIP J 20 1 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 SN54F245J Samples SN74F245DBR ACTIVE SSOP DB 20 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 F245 Samples SN74F245DW ACTIVE SOIC DW 20 25 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 F245 Samples SN74F245DWR ACTIVE SOIC DW 20 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 F245 Samples SN74F245N ACTIVE PDIP N 20 20 RoHS & Non-Green NIPDAU N / A for Pkg Type 0 to 70 SN74F245N Samples SN74F245NE4 ACTIVE PDIP N 20 20 RoHS & Non-Green NIPDAU N / A for Pkg Type 0 to 70 SN74F245N Samples SN74F245NSR ACTIVE SO NS 20 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 74F245 Samples SNJ54F245FK ACTIVE LCCC FK 20 1 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 85511012A SNJ54F Samples Addendum-Page 1 Samples PACKAGE OPTION ADDENDUM www.ti.com 10-Jun-2022 Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan (2) Lead finish/ Ball material MSL Peak Temp Op Temp (°C) Device Marking (3) Samples (4/5) (6) 245FK SNJ54F245J ACTIVE CDIP J 20 1 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 8551101RA SNJ54F245J Samples SNJ54F245W ACTIVE CFP W 20 1 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 8551101SA SNJ54F245W Samples (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of