TAS5182IDCARG4

TAS5182 www.ti.com SLES045E - JUNE 2002 - REVISED MAY 2004 100−W STEREO DIGITAL AMPLIFIER POWER STAGE CONTROLLER D Power Amplifiers D Home Theater D Subwoofer Driver FEATURES D D D D Stereo H-Bridge Controller Efficiency > 95%† 2x100 W (RMS) at 6 Ω (BTL)† DESCRIPTION THD+N < 0.15% (Typical at 100 W at 6 Ω, 1 kHz)‡ D Half-Bridge Independent Control D Glueless Interface to TAS50XX Digital Audio PWM Processors D 3.3-V Digital Interface D Fault Detection - Overcurrent - Overtemperature - Undervoltage Protection for External MOSFETs D Low Profile 56-Terminal TSSOP SMD Package The TAS5182 device is a high-performance, stereo digital amplifier power stage controller. It is designed to drive two discrete bridge-tied-load (BTL) MOSFET output stages at up to 100 W per channel at 6 Ω. The TAS5182 device, incorporating Texas Instrument’s PurePatht technology, is used in conjunction with a digital audio PWM processor (TAS50XX) and two discrete MOSFET H-bridges (4 MOSFETs per H-Bridge) to deliver high-power, true digital audio amplification. The efficiency of this digital amplifier can be greater than 95%, reducing the size of both the power supplies and heat sinks needed. The TAS5182 device accepts a stereo PWM 3.3-V input, and it controls the switching of the discrete H-bridges. Overcurrent, overtemperature, and undervoltage protections are built into the TAS5182 device, safeguarding the H-bridge and speakers against output short-circuit conditions, overtemperature conditions, and other fault conditions that could damage the system. APPLICATIONS D AV Receivers D High Power DVD Receivers Typical Stereo Audio System Using TAS5182 H-Bridge Driver Digital Audio • TI DAP • TI DSP • TI SPD IF • TI 1394 Texas Instruments Digital Audio Solutions Left LOAD Right LOAD L L TAS5182 TAS50XX R R PWM Modulator H-Bridge Driver Discrete MOSFET H-Bridges † When using appropriate MOSFETs. ‡ When using recommended design. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PurePath and PowerPAD are trademarks of Texas Instruments. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright  2003, Texas Instruments Incorporated TAS5182 www.ti.com SLES045E - JUNE 2002 - REVISED MAY 2004 ORDERING INFORMATION TA PACKAGE 0°C to 70°C TAS5182DCA -40°C to 85°C TAS5182IDCA These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates. ABSOLUTE MAXIMUM RATINGS over operating free-air temperature range (TA) unless otherwise noted(1) TAS5182 Supply voltage range GVDD to GVSS -0.3 V to 15 V DVDD to DVSS -0.3 V to 3.6 V AP, AM, BP, BM, CP, CM, DP, DM -0.3 V to DVDD + 0.3 V RESET, SHUTDOWN -0.3 V to DVDD + 0.3 V BST_A, BST_B, BST_C, BST_D to GVSS for pulse width