±
SLOS293D − JUNE 2000 − REVISED DECEMBER 2001
D Remote Terminal ADSL Line Driver
D
D
D
D
D High Speed
− Ideal for Both Full Rate ADSL and G.Lite
− Compatible With 1:1 Transformer Ratio
Low 2.7 pA/√Hz Noninverting Current Noise
− Reduces Noise Feedback Through
Hybrid Into Downstream Channel
Wide Supply Voltage Range ± 5 V to ± 15 V
− Ideal for ± 12-V Operation
Wide Output Swing
− 42 Vpp Differential Output Voltage,
RL = 200 Ω, ± 12-V Supply
High Output Current
− 175 mA (typ)
D
D
D
D
D
THS6052
SOIC (D) AND
SOIC PowerPAD (DDA) PACKAGE
(TOP VIEW)
D1 OUT
D1 IN−
D1 IN+
VCC−
1
8
2
7
3
6
4
5
− 110 MHz (−3 dB, G=8, ± 12 V)
− 1500 V/µs Slew Rate (G = 8, ± 12 V)
Low Distortion, Single-Ended, G = 8
− −83 dBc (250 kHz, 2 Vpp, 100-Ω load)
Low Power Shutdown (THS6053)
− 300-µA Total Standby Current
Thermal Shutdown and Short Circuit
Protection
Standard SOIC, SOIC PowerPAD, and
TSSOP PowerPAD Package
Evaluation Module Available
THS6053
SOIC (D) AND
TSSOP PowerPAD (PWP) PACKAGE
(TOP VIEW)
D1 OUT
D1 IN−
D1 IN+
VCC−
N/C
GND
N/C
VCC+
D2 OUT
D2 IN−
D2 IN+
1
14
2
13
3
12
4
11
5
10
6
9
7
8
VCC+
D2 OUT
D2 IN−
D2 IN+
N/C
SHUTDOWN
N/C
description
The THS6052/3 is a high-speed line driver ideal for driving signals from the remote terminal to the central office
in asymmetrical digital subscriber line (ADSL) applications. It can operate from ±12-V supply voltages while
drawing only 5.2 mA of supply current per channel. It offers low –83 dBc total harmonic distortion driving a 100-Ω
load (2 Vpp). The THS6052/3 offers a high 42-Vpp differential output swing across a 200-Ω load from a ±12-V
supply. The THS6053 features a low-power shutdown mode, consuming only 300 µA quiescent current per
channel. The THS6052/3 is packaged in a standard SOIC, SOIC PowerPAD, and TSSOP PowerPAD
packages.
+12 V
THS6052
Driver 1
+
_
VI+
1:1
750 Ω
210 Ω
VI−
+
_
RELATED PRODUCTS
50 Ω
THS6052
Driver 2
50 Ω
DEVICE
15.4 dBm
Delivered
to Telephone
Line
DESCRIPTION
THS6042/3 350-mA, ±12 ADSL CPE line driver
100 Ω
THS6092/3 275-mA, +12 V ADSL CPE line driver
OPA2677
380-mA, +12 V ADSL CPE line driver
THS6062
Low noise ADSL receiver
0.68 µF
−12 V
750 Ω
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PowerPAD is a trademark of Texas Instruments.
Copyright 2001, Texas Instruments Incorporated
! "# $ ! %#&'" ( $)
(#" ! " !%$"" ! %$ *$ $ ! $+ ! ! # $ !
! ( ( , -) (#" % "$!!. ( $! $"$!! '- "'#($
$! . '' % $ $ !)
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
1
±
SLOS293D − JUNE 2000 − REVISED DECEMBER 2001
AVAILABLE OPTION
PACKAGED DEVICE
EVALUATION
MODULES
TA
SOIC-8
(D)
SOIC-8 PowerPAD
(DDA)
SOIC-14
(D)
TSSOP-14
(PWP)
0°C to 70°C
THS6052CD
THS6052CDDA
THS6053CD
THS6053CPWP
THS6052EVM
THS6053EVM
−40°C to 85°C
THS6052ID
THS6052IDDA
THS6053ID
THS6053IPWP
—
absolute maximum ratings over operating free-air temperature (unless otherwise noted)†
Supply voltage, VCC+ to VCC− . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 V
Input voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± VCC
Output current (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 275 mA
Differential input voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 4 V
Maximum junction temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150°C
Total power dissipation at (or below) 25°C free-air temperature . . . . . . . . . . . See Dissipation Ratings Table
Operating free-air temperature, TA: Commercial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C
Industrial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −40°C to 85°C
Storage temperature, Tstg : Commercial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65°C to 125°C
Industrial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65°C to 125°C
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300°C
† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTE 1: The THS6052 and THS6053 may incorporate a PowerPAD on the underside of the chip. This acts as a heatsink and must be
connected to a thermally dissipating plane for proper power dissipation. Failure to do so may result in exceeding the maximum junction
temperature which could permanently damage the device. See TI technical brief SLMA002 for more information about utilizing the
PowerPAD thermally enhanced package.
DISSIPATION RATING TABLE
TA = 25°C
TJ = 150°C
POWER RATING
PACKAGE
θJA
θJC
D-8
38.3°C/W‡
9.2°C/W‡
1.32 W
D-14
95°C/W‡
45.8°C/W‡
66.6°C/W‡
26.9°C/W‡
1.88 W
PWP
37.5°C/W
1.4°C/W
DDA
2.73 W
3.3 W
‡ This data was taken using the JEDEC proposed high-K test PCB. For the JEDEC low-K test
PCB, the ΘJA is168°C/W for the D−8 package and 122.3°C/W for the D−14 package.
recommended operating conditions
MIN
Supply voltage, VCC+ to VCC−
2
MAX
±5
±15
Single supply
10
30
0
70
−40
85
C-suffix
Operating free-air temperature, TA
NOM
Dual supply
I-suffix
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
UNIT
V
°C
±
SLOS293D − JUNE 2000 − REVISED DECEMBER 2001
electrical characteristics over recommended operating free-air temperature range, TA = 25°C,
VCC = ±12 V, RFEEDBACK = 750 Ω, RL = 100 Ω (unless otherwise noted)
dynamic performance
PARAMETER
TEST CONDITIONS
G= 1, RF = 1 kΩ
RL = 50 Ω
BW
G= 2, RF = 680 Ω
G= 8, RF = 330 Ω
Small-signal bandwidth (− 3 dB)
G= 1, RF = 1 kΩ
RL = 100 Ω
G= 2, RF = 680 Ω
G= 8, RF = 330 Ω
MIN
TYP
VCC = ± 5 V
110
VCC = ±12 V
120
90
VCC = ± 5 V
150
VCC = ±12 V
170
110
650
VCC = ±15 V
VCC = ±12 V
VCC = ±15 V
VCC = ±12 V
950
1500
VCC = ±15 V
NOTE 2: Slew rate is defined from the 25% to the 75% output levels.
VCC = ±15 V
1700
Slew rate (see Note 2), G=8
VO = 16 VPP
MHz
135
VCC = ±5 V, ±12 V
VCC = ± 5 V
VCC = ±12 V
SR
UNIT
100
VCC = ±5 V, ±12 V
VCC = ± 5 V
VCC = ±12 V
VO = 4 VPP
MAX
850
V/µs
noise/distortion performance
PARAMETER
THD
TEST CONDITIONS
Total harmonic distortion (single-ended
configuration)
Vn
Input voltage noise
In
Input current noise
XT
Gain = 8,
RL = 100 Ω,
VCC = ±12
12 V, f = 250 kHz
VO(pp) = 16 V
−78
RL = 50 Ω,
f = 250 kHz
VO(pp) = 2 V
−74
VO(pp) = 6 V
−72
Gain = 8,
VCC = ±5
5 V,
f = 250 kHz,
G = 2,
VCC = ±5 V,
VCC = ±12 V,
VCC = ±15 V
VCC = ±12 V,
RL= 100 Ω
f = 250 kHz,
G = 2,
VCC = ±5 V,
RL= 50 Ω
f = 10 kHz,
−Input
Crosstalk
TYP
−83
VCC = ±5 V, f = 10 kHz ,
±12 V
+Input
MIN
VO(pp) = 2 V
POST OFFICE BOX 655303
2.1
MAX
UNIT
dBc
nV/√Hz
2.7
pA/√Hz
10.7
VO = 2 Vp-p
−79
VO = 2 Vp-p
−71
dBc
• DALLAS, TEXAS 75265
3
±
SLOS293D − JUNE 2000 − REVISED DECEMBER 2001
electrical characteristics over recommended operating free-air temperature range, TA = 25°C,
VCC = ±12 V, RFEEDBACK = 750 Ω, RL = 100 Ω (unless otherwise noted) (continued)
dc performance
PARAMETER
TEST CONDITIONS
Input offset voltage
VOS
VCC = ±12 V,
VCC = ±6 V
Differential offset voltage
Offset drift
− Input bias current
IIB
VCC = ±12 V,
VCC = ±6
6V
+ Input bias current
MAX
TA = 25°C
TA = full range
5
10
TA = 25°C
TA = full range
3
UNIT
15
6
mV
8
TA = full range
TA = 25°C
30
5
TA = full range
TA = 25°C
2
µV/°C
10
12
5
6
5
TA = full range
RL = 1 kΩ,
VCC = ±12 V,
VCC = ±6 V
Open loop transimpedance
TYP
TA = full range
TA = 25°C
Differential input bias current
ZOL
MIN
A
µA
10
12
1
MΩ
input characteristics
PARAMETER
TEST CONDITIONS
VICR
Input common-mode voltage range
VCC = ±12 V
VCC = ± 6 V
CMRR
Common-mode rejection ratio
VCC = ±12 V,
VCC = ±6 V
RI
Input resistance
CI
Input capacitance
TA = 25°C
TA = full range
MIN
TYP
±9.7
±10.1
± 3.8
±4.2
59
66
MAX
UNIT
V
dB
57
+ Input
1.5
MΩ
− Input
15
Ω
2
pF
output characteristics
PARAMETER
TEST CONDITIONS
RL = 50 Ω,
VO
Output voltage swing
Single ended
RL = 100 Ω
RL = 25 Ω,
IO
Output current
ISC
Short-circuit current
RL = 0 Ω,
Output resistance
Open loop
4
RL = 10 Ω,
POST OFFICE BOX 655303
VCC = ± 6 V
VCC = ±12 V
MIN
TYP
±4.2
±4.6
±10.1
±10.5
VCC = ±6 V
VCC = ±12 V
±4.4
±4.8
150
175
VCC = ±6 V
VCC = ±12 V
150
175
• DALLAS, TEXAS 75265
MAX
UNIT
V
mA
250
mA
14
Ω
±
SLOS293D − JUNE 2000 − REVISED DECEMBER 2001
electrical characteristics over recommended operating free-air temperature range, TA = 25°C,
VCC = ±12 V, RFEEDBACK = 750 Ω, RL = 100 Ω (unless otherwise noted) (continued)
power supply
PARAMETER
TEST CONDITIONS
Dual supply
VCC
ICC
PSRR
Operating range
Single supply
MIN
TYP
MAX
± 4.5
± 16.5
9
33
VCC = ±12 V
TA = 25°C
TA = full range
5.2
7
VCC = ±6 V
TA = 25°C
TA = full range
4.5
6.5
VCC = ±12 V
TA = 25°C
TA = full range
−64
−62
−61
−
VCC = ±6 V
TA = 25°C
TA = full range
−60
−70
Quiescent current (each driver)
Power supply rejection ratio
UNIT
V
8
mA
7.5
dB
−58
shutdown characteristics (THS6053 only)
PARAMETER
TEST CONDITIONS
VIL(SHDN)
Shutdown pin voltage for power up
VCC = ±6 V, ±12 V GND = 0 V,
(GND Pin as Reference)
VIH(SHDN)
Shutdown pin voltage for power down
VCC = ±6 V, ±12 V, GND = 0 V,
(GND Pin as Reference)
ICC(SHDN)
tDIS
Total quiescent current when in shutdown state
tEN
IIL(SHDN)
Enable time (see Note 3)
IIH(SHDN)
Shutdown pin input bias current for power down
Disable time (see Note 3)
Shutdown pin input bias current for power up
MIN
TYP
0.8
2
UNIT
V
V
VGND = 0 V, VCC = ±6 V, ±12 V
VCC = ±12 V
0.3
VCC = ±12 V
VCC = ±6 V, ±12 V
0.4
VCC = ±6 V, ±12 V,
V(SHND) = 3.3 V
MAX
0.7
mA
µs
0.1
µs
40
100
µA
50
100
µA
NOTE 3: Disable/enable time is defined as the time from when the shutdown signal is applied to the SHDN pin to when the supply current has
reached half of its final value.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5
±
SLOS293D − JUNE 2000 − REVISED DECEMBER 2001
APPLICATION INFORMATION
+12 V
THS6052
Driver 1
VI+
0.1 µF
+
6.8 µF
50 Ω
+
_
1:1
750 Ω
100 Ω
Telephone Line
1 µF
210 Ω
499 Ω
+12 V
0.68 µF
1 kΩ
THS6052
Driver 2
VI−
0.1 µF
50 Ω
+
_
499 Ω
−
+
THS6062
Receiver 1
750 Ω
0.1 µF
VO+
499 Ω
6.8 µF
+
−12 V
1 kΩ
499 Ω
−
+
VO−
THS6062
Receiver 2
−12 V
0.01 µF
Figure 1. THS6052 ADSL Application With 1:1 Transformer Ratio
6
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
PACKAGE OPTION ADDENDUM
www.ti.com
10-Dec-2020
PACKAGING INFORMATION
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
(2)
Lead finish/
Ball material
MSL Peak Temp
Op Temp (°C)
Device Marking
(3)
(4/5)
(6)
THS6052CDDA
DDA
8
75
RoHS & Green
SN
Level-1-260C-UNLIM
0 to 70
6052C
D
8
75
RoHS & Green
NIPDAU
Level-1-260C-UNLIM
-40 to 85
6052I
ACTIVE SO PowerPAD
DDA
8
75
RoHS & Green
SN
Level-1-260C-UNLIM
-40 to 85
6052I
THS6053CPWPR
ACTIVE
HTSSOP
PWP
14
2000
RoHS & Green
NIPDAU
Level-2-260C-1 YEAR
0 to 70
HS6053C
THS6053IPWP
ACTIVE
HTSSOP
PWP
14
90
RoHS & Green
NIPDAU
Level-2-260C-1 YEAR
-40 to 85
HS6053I
THS6053IPWPR
ACTIVE
HTSSOP
PWP
14
2000
RoHS & Green
NIPDAU
Level-2-260C-1 YEAR
-40 to 85
HS6053I
THS6052ID
THS6052IDDA
ACTIVE SO PowerPAD
ACTIVE
SOIC
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance
do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may
reference these types of products as "Pb-Free".
RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption.
Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of
工商网监
湘ICP备2023018690号
