TL080
JFET-INPUT OPERATIONAL AMPLIFIER
SLOS368 − JUNE 2001
D Low Power Consumption
D Wide Common-Mode and Differential
D
D
D
P PACKAGE
(TOP VIEW)
Voltage Ranges
Low Input Bias and Offset Currents
Output Short-Circuit Protection
Low Total Harmonic
Distortion . . . 0.003% Typ
High Input Impedance . . . JFET Input Stage
N1/COMP
IN−
IN+
VCC
1
8
2
7
3
6
4
5
COMP
VCC+
OUT
OFFSET N2
D
D External Frequency Compensation
D Common-Mode Input Voltage Range
D
D
Includes VCC+
Latch-Up-Free Operation
High Slew Rate . . . 13 V/µs Typ
description
The TL080 JFET-input operational amplifier incorporates well-matched, high-voltage JFET and bipolar
transistors in an integrated circuit. This device features high slew rates, low input bias and offset currents, and
a low offset-voltage temperature coefficient. Offset adjustment and external-compensation options are
available.
The TL080C is characterized for operation from 0°C to 70°C.
AVAILABLE OPTIONS
PACKAGE
TA
VIOmax
AT 25°C
PLASTIC
DIP
(P)
0°C to 70°C
10 mV
TL080CP
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Copyright 2001, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
•
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443
•
1
TL080
JFET-INPUT OPERATIONAL AMPLIFIER
SLOS368 − JUNE 2001
schematic
VCC+
IN+
7
3
2
64 Ω
IN−
128 Ω
6
OUT
N1/COMP
OFFSET N2
64 Ω
1
5
8
COMP
1080 Ω
VCC−
4
ÌÌÌ
1080 Ω
All component values shown are nominal.
2
•
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443
•
TL080
JFET-INPUT OPERATIONAL AMPLIFIER
SLOS368 − JUNE 2001
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)†
Supply voltage (see Note 1): VCC+ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 V
VCC− . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −18 V
Differential input voltage, VID (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±30 V
Input voltage, VI (see Notes 1 and 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±15 V
Duration of short-circuit current (see Note 4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Unlimited
Package thermal impedance, θJA (see Notes 5 and 6) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85°C/W
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C
Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65°C to 150°C
†
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. All voltage values, except differential voltages, are with respect to the midpoint between VCC+ and VCC−.
2. Differential voltages are at IN+ with respect to IN−.
3. The magnitude of the input voltage must never exceed the magnitude of the supply voltage or 15 V, whichever is less.
4. The output can be shorted to ground or to either supply. Temperature and/or supply voltages must be limited to ensure that the
dissipation rating is not exceeded.
5. Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable
ambient temperature is PD = (TJ(max) − TA)/θJA. Operating at the absolute maximum TJ of 150°C can impact reliability.
6. The package thermal impedance is calculated in accordance with JESD 51-7.
electrical characteristics, VCC± = ±15 V (unless otherwise noted)
PARAMETER
TEST CONDITIONS
VIO
Input offset voltage
VO = 0
0,
RS = 50 Ω
aV
Temperature coefficient of input offset voltage
VO = 0,
RS = 50 Ω
IO
IIO
Input offset current‡
VO = 0
TA†
MIN
25°C
Input bias current‡
VICR
Common-mode input voltage range
VOM
Maximum peak output voltage swing
3
15
20
RL = 10 kΩ
RL ≥ 2 kΩ
µV/°C
18
5
200
pA
2
nA
30
400
pA
10
nA
25°C
±11
−12
to 15
25°C
±12
±13.5
Full range
RL ≥ 2 kΩ
mV
25°C
Full range
RL ≥ 10 kΩ
UNIT
Full range
Full range
VO = 0
VO = ±10 V
V,
MAX
Full range
25°C
IIB
TYP
V
±12
V
±10
±12
25°C
25
200
Full range
15
AVD
Large signal differential voltage amplification
Large-signal
V/mV
B1
Unity-gain bandwidth
25°C
3
ri
Input resistance
25°C
1012
Ω
CMRR
Common-mode rejection ratio
VIC = VICRmin,
VO = 0, RS = 50 Ω
kSVR
Supply-voltage rejection ratio (∆VCC±/∆VIO)
VCC = ±15 V to ±9 V,
VO = 0, RS = 50 Ω
25°C
ICC
Supply current
VO = 0,
25°C
1.4
VO1/VO2
Crosstalk attenuation
AVD = 100
25°C
120
No load
MHz
25°C
70
86
dB
70
86
dB
2.8
mA
dB
†
All characteristics are measured under open-loop conditions with zero common-mode voltage unless otherwise specified. Full range for TA is
−40°C to 85°C.
‡ Input bias currents of a FET-input operational amplifier are normal junction reverse currents, which are temperature sensitive, as shown in
Figure 5. Pulse techniques must be used that will maintain the junction temperature as close to the ambient temperature as possible.
•
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443
•
3
TL080
JFET-INPUT OPERATIONAL AMPLIFIER
SLOS368 − JUNE 2001
operating characteristics, VCC± = ±15 V, TA = 25°C
PARAMETER
TEST CONDITIONS
SR
Slew rate at unity gain
VI = 10 V,
RL = 2 kΩ,
CL = 100 pF,
See Figure 1
tr
Rise time overshoot factor
Rise-time
mV
VI = 20 mV,
kΩ
RL = 2 kΩ,
CL = 100 pF
pF,
See Figure 1
Vn
Equivalent input noise voltage
RS = 100 Ω
In
Equivalent input noise current
RS = 100 Ω,
f = 1 kHz
THD
Total harmonic distortion
VO(rms) = 10 V,
RS ≤ 1 kΩ,
MIN
TYP
8
13
MAX
UNIT
V/µs
µs
0.05
20%
f = 1 kHz
18
nV/√Hz
4
µV
f = 10 Hz to 10 kHz
0.01
RL ≥ 2 kΩ,
f = 1 kHz
pA/√Hz
0.003%
APPLICATION INFORMATION
_
10 kΩ
OUT
1 kΩ
−
VI
VI
+
OUT
CL =
100 pF
RL = 2 kΩ
+
RL
CC = 18 pF
Figure 1. Unity-Gain Amplifier
CL = 100 pF
Figure 2. Gain-of-10 Inverting Amplifier
100 kΩ
VCC+
C2
1 MΩ
C1 = 500 pF
2 MΩ
N2
N1
IN−
−
OUT
−
IN−
COMP
OUT
+
Figure 3. Feed-Forward Compensation
+
IN+
4
CC
N1
Figure 4. Input Offset Voltage Null Circuit
•
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443
•
TL080
JFET-INPUT OPERATIONAL AMPLIFIER
SLOS368 − JUNE 2001
TYPICAL CHARACTERISTICS
Table of Graphs
FIGURE
Maximum peak output voltage
vs Frequency
vs Free-air
Free air temperature
vs Load resistance
vs Supply voltage
5, 6, 7
8
9
10
Large signal differential voltage amplification
Large-signal
vs Free-air
Free air temperature
vs Frequency
11
12
Differential voltage amplification
vs Frequency
13
Total power dissipation
vs Free-air temperature
14
ICC
Supply current
vs Free-air
Free air temperature
vs Supply voltage
14
15
IIB
Input bias current
vs Free-air temperature
16
VOM
AVD
PD
Large-signal pulse response
vs Time
17
VO
Output voltage
vs Elapsed time
18
CMRR
Common-mode rejection ratio
vs Free-air temperature
19
Vn
Equivalent input noise voltage
vs Frequency
20
THD
Total harmonic distortion
vs Frequency
21
MAXIMUM PEAK OUTPUT VOLTAGE
vs
FREQUENCY
MAXIMUM PEAK OUTPUT VOLTAGE
vs
FREQUENCY
± 15
VCC ± = ± 15 V
RL = 10 kΩ
TA = 25°C
See Figure 2
± 12.5
± 10
VOM − Maximum Peak Output Voltage − V
VOM − Maximum Peak Output Voltage − V
± 15
VCC ± = ± 10 V
± 7.5
VCC ± = ± 5 V
±5
± 2.5
RL = 2 kΩ
TA = 25°C
See Figure 2
VCC ± = ± 15 V
± 12.5
± 10
VCC ± = ± 10 V
± 7.5
±5
VCC ± = ± 5 V
± 2.5
0
0
100
1k
10 k
100 k
1M
100
10 M
1k
f − Frequency − Hz
10 k
100 k
1M
10 M
f − Frequency − Hz
Figure 5
Figure 6
•
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443
•
5
TL080
JFET-INPUT OPERATIONAL AMPLIFIER
SLOS368 − JUNE 2001
TYPICAL CHARACTERISTICS
MAXIMUM PEAK OUTPUT VOLTAGE
vs
FREQUENCY
MAXIMUM PEAK OUTPUT VOLTAGE
vs
FREE-AIR TEMPERATURE
TA = 25°C
± 12.5
See Figure 2
± 10
TA = − 55°C
± 7.5
±5
TA = 125°C
± 2.5
0
10 k
40 k 100 k
400 k
1M
4M
ÌÌÌÌÌ
ÌÌÌÌ
±15
VCC ± = ± 15 V
RL = 2 kΩ
VOM − Maximum Peak Output Voltage − V
VOM − Maximum Peak Output Voltage − V
± 15
RL = 10 kΩ
±12.5
RL = 2 kΩ
±10
±7.5
±5
±2.5
ÌÌÌÌÌ
ÌÌÌÌÌ
ÌÌÌÌÌ
VCC± = ±15 V
See Figure 2
0
−75
10 M
−50
−25
50
75
100
125
Figure 8
Figure 7
MAXIMUM PEAK OUTPUT VOLTAGE
vs
SUPPLY VOLTAGE
MAXIMUM PEAK OUTPUT VOLTAGE
vs
LOAD RESISTANCE
± 15
± 15
VCC ± = ± 15 V
TA = 25°C
See Figure 2
± 12.5
VOM − Maximum Peak Output Voltage − V
VOM − Maximum Peak Output Voltage − V
25
TA − Free-Air Temperature − °C
f − Frequency − Hz
RL = 10 kΩ
TA = 25°C
± 12.5
± 10
± 7.5
±5
± 2.5
0
± 10
± 7.5
±5
± 2.5
0
0.1
0.2
0.4
0.7
1
2
4
7
0
10
2
4
6
8
10
12
| VCC ± | − Supply Voltage − V
RL − Load Resistance − kΩ
Figure 10
Figure 9
6
0
•
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443
•
14
16
TL080
JFET-INPUT OPERATIONAL AMPLIFIER
SLOS368 − JUNE 2001
1000
400
200
100
40
20
10
ÌÌÌÌÌ
ÌÌÌÌÌ
ÌÌÌÌÌ
4
2
1
−75
VCC± = ±15 V
VO = ±10 V
RL = 2 kΩ
−50
−25
0
25
50
75
100
125
TA − Free-Air Temperature − °C
LARGE-SIGNAL
DIFFERENTIAL VOLTAGE AMPLIFICATION
AND PHASE SHIFT
vs
FREQUENCY
ÌÌÌÌÌÌÌ
ÌÌÌÌÌÌÌ
ÌÌÌÌÌÌÌ
ÌÌÌÌÌ
ÌÌÌÌÌ
ÌÌÌÌÌ
ÌÌÌÌ
ÌÌÌÌ
106
VCC± = ±5 V to ±15 V
RL = 2 kΩ
TA = 25°C
105
104
Differential
Voltage
Amplification
(left scale)
103
102
Phase Shift
(right scale)
101
1
1
10
100
10 k
100 k
1M
45°
90°
135°
180°
10 M
f − Frequency − Hz
Figure 12
Figure 11
DIFFERENTIAL VOLTAGE AMPLIFICATION
vs
FREQUENCY WITH FEED-FORWARD COMPENSATION
SUPPLY CURRENT PER AMPLIFIER
vs
FREE-AIR TEMPERATURE
2.0
106
VCC ± = ± 15 V
C2 = 3 pF
TA = 25°C
See Figure 3
105
VCC ± = ± 15 V
No Signal
No Load
1.8
I CC ± − Supply Current − mA
AVD − Differential Voltage Amplification − V/mV
1k
0°
Phase Shift
LARGE-SIGNAL
DIFFERENTIAL VOLTAGE AMPLIFICATION
vs
FREE-AIR TEMPERATURE
A VD − Large-Signal Differential Voltage Amplification − V/mV
A VD − Large-Signal Differential Voltage Amplification − V/mV
TYPICAL CHARACTERISTICS
104
103
102
1.6
1.4
1.2
1.0
0.8
0.6
0.4
10
0.2
1
100
1k
10 k
100 k
1M
0
−75
10 M
−50
−25
0
25
50
75
100
125
TA − Free-Air Temperature − °C
f − Frequency − Hz
Figure 13
Figure 14
•
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443
•
7
TL080
JFET-INPUT OPERATIONAL AMPLIFIER
SLOS368 − JUNE 2001
TYPICAL CHARACTERISTICS
INPUT BIAS CURRENT
vs
FREE-AIR TEMPERATURE
SUPPLY CURRENT
vs
SUPPLY VOLTAGE
100
2.0
I IB − Input Bias Current − nA
1.6
I CC ± − Supply Current − mA
V CC ± = ± 15 V
TA = 25°C
No Signal
No Load
1.8
1.4
1.2
1.0
0.8
0.6
10
1
0.1
0.4
0.2
0.01
− 50
0
0
2
4
6
8
10
12
16
14
− 25
0
| VCC ± | − Supply Voltage − V
Figure 15
50
75
100
125
Figure 16
OUTPUT VOLTAGE
vs
ELAPSED TIME
VOLTAGE-FOLLOWER
LARGE-SIGNAL PULSE RESPONSE
6
28
VCC ± = ± 15 V
RL = 2 k Ω
CL = 100 pF
TA = 25°C
4
24
VO − Output Voltage − mV
Input and Output Voltages − V
25
TA − Free-Air Temperature − °C
Output
2
0
−2
Input
20
16
VCC ± = ± 15 V
RL = 2 k Ω
CL = 100 pF
TA = 25°C
See Figure 1
12
8
4
−4
0
−6
−4
0
0.5
1
1.5
2
2.5
3
3.5
0
t − Time − µ s
Figure 17
8
0.2
0.4
0.6
t − Elapsed Time − µ s
Figure 18
•
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443
•
0.8
1.0
1.2
TL080
JFET-INPUT OPERATIONAL AMPLIFIER
SLOS368 − JUNE 2001
TYPICAL CHARACTERISTICS
EQUIVALENT INPUT NOISE VOLTAGE
vs
FREQUENCY
COMMON-MODE REJECTION RATIO
vs
FREE-AIR TEMPERATURE
50
Vn − Equilvalent Input Noise Voltage − nV/ Hz
VCC ± = ± 15 V
RL = 10 kΩ
88
87
86
85
84
83
− 75
VCC ± = ± 15 V
AVD = 10
RS = 100Ω
TA = 25°C
40
30
20
10
0
− 50
− 25
0
25
50
75
100
125
10
40
100
TA − Free-Air Temperature − °C
400 1 k
4 k 10 k
40 k 100 k
f − Frequency − Hz
Figure 19
Figure 20
TOTAL HARMONIC DISTORTION
vs
FREQUENCY
1
VCC ± = ± 15 V
AVD = 1
VI(RMS) = 6 V
TA = 25°C
0.4
THD − Total Harmonic Distortion − %
CMRR − Common-Mode Rejection Ratio − dB
89
0.1
0.04
0.01
0.004
0.001
100
400
1k
4k
10 k
40 k 100 k
f − Frequency − Hz
Figure 21
•
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443
•
9
TL080
JFET-INPUT OPERATIONAL AMPLIFIER
SLOS368 − JUNE 2001
APPLICATION INFORMATION
220 kΩ
0.00375 µF
10 kΩ
0.01 µF
0.003 µF
0.03 µF
27 kΩ
MIN
VCC+
100 Ω
−
TL080
+
1 µF
Input
10 kΩ
100 kΩ
Bass
MAX
3.3 kΩ
0.03 µF
10 kΩ
VCC−
Balance
100 Ω
+
75 µF
47 kΩ
10 pF
0.003 µF
5 kΩ +
Gain 47 µF
VCC+
−
TL080
+
VCC−
68 kΩ
10 pF
50 pF
Figure 22. IC Preamplifier
10
MIN
100 kΩ
Treble
MAX
•
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443
•
Output
PACKAGE OPTION ADDENDUM
www.ti.com
6-Sep-2015
PACKAGING INFORMATION
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
MSL Peak Temp
(2)
(6)
(3)
Op Temp (°C)
Device Marking
(4/5)
TL080CP
OBSOLETE
PDIP
P
8
TBD
Call TI
Call TI
0 to 70
TL080CPE4
OBSOLETE
PDIP
P
8
TBD
Call TI
Call TI
0 to 70
TL080IP
OBSOLETE
PDIP
P
8
TBD
Call TI
Call TI
-40 to 85
TL080CP
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3)
MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
(4)
There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.
(5)
Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation
of the previous line and the two combined represent the entire Device Marking for that device.
(6)
Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish
value exceeds the maximum column width.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
Addendum-Page 1
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
6-Sep-2015
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
Addendum-Page 2
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of
non-designated products, TI will not be responsible for any failure to meet ISO/TS16949.
Products
Applications
Audio
www.ti.com/audio
Automotive and Transportation
www.ti.com/automotive
Amplifiers
amplifier.ti.com
Communications and Telecom
www.ti.com/communications
Data Converters
dataconverter.ti.com
Computers and Peripherals
www.ti.com/computers
DLP® Products
www.dlp.com
Consumer Electronics
www.ti.com/consumer-apps
DSP
dsp.ti.com
Energy and Lighting
www.ti.com/energy
Clocks and Timers
www.ti.com/clocks
Industrial
www.ti.com/industrial
Interface
interface.ti.com
Medical
www.ti.com/medical
Logic
logic.ti.com
Security
www.ti.com/security
Power Mgmt
power.ti.com
Space, Avionics and Defense
www.ti.com/space-avionics-defense
Microcontrollers
microcontroller.ti.com
Video and Imaging
www.ti.com/video
RFID
www.ti-rfid.com
OMAP Applications Processors
www.ti.com/omap
TI E2E Community
e2e.ti.com
Wireless Connectivity
www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2015, Texas Instruments Incorporated
工商网监
湘ICP备2023018690号
