TL1431
www.ti.com
SLVS062M – DECEMBER 1991 – REVISED APRIL 2012
PRECISION PROGRAMMABLE REFERENCE
Check for Samples: TL1431
FEATURES
1
•
•
•
0.4% Initial Voltage Tolerance
0.2-Ω Typical Output Impedance
Fast Turnon…500 ns
D PACKAGE
(TOP VIEW)
1
8
2
7
3
6
4
5
JG OR PW PACKAGE
(TOP VIEW)
REF
ANODE
ANODE
NC
NC – No internal connection
ANODE terminals are connected internally.
ANODE
KTP PACKAGE
(TOP VIEW)
CATHODE
NC
NC
NC
1
8
2
7
3
6
4
5
FK PACKAGE
(TOP VIEW)
REF
NC
ANODE
NC
NC
CATHODE
NC
REF
NC
CATHODE
ANODE
ANODE
NC
Sink Current Capability…1 mA to 100 mA
Low Reference Current (REF)
Adjustable Output Voltage…VI(ref) to 36 V
NC – No internal connection
LP PACKAGE
(TOP VIEW)
CATHODE
CATHODE
ANODE
ANODE
REF
REF
NC
NC
NC
NC
NC
4
3 2 1 20 19
18
5
6
17
7
15
14
9 10 11 12 13
8
16
NC
NC
NC
ANODE
NC
NC
NC
NC
NC
NC
•
•
•
2
DESCRIPTION/ORDERING INFORMATION
The TL1431 is a precision programmable reference with specified thermal stability over automotive, commercial,
and military temperature ranges. The output voltage can be set to any value between VI(ref) (approximately 2.5 V)
and 36 V with two external resistors (see Figure 16). This device has a typical output impedance of 0.2 Ω. Active
output circuitry provides a very sharp turnon characteristic, making the device an excellent replacement for Zener
diodes and other types of references in applications such as onboard regulation, adjustable power supplies, and
switching power supplies.
The TL1431C is characterized for operation over the commercial temperature range of 0°C to 70°C. The
TL1431Q is characterized for operation over the full automotive temperature range of –40°C to 125°C. The
TL1431M is characterized for operation over the full military temperature range of –55°C to 125°C.
1
2
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PowerFLEX is a trademark of Texas Instruments.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 1991–2012, Texas Instruments Incorporated
TL1431
SLVS062M – DECEMBER 1991 – REVISED APRIL 2012
www.ti.com
ORDERING INFORMATION (1)
PACKAGE (2)
TA
PowerFLEX™ – KTP
TL1431CKTPR
Tube of 75
TL1431CD
Reel of 2500
TL1431CDR
Bulk of 1000
TL1431CLP
Reel of 2000
TL1431CLPR
Ammo of 2000
TL1431CLPME3
Tube of 150
TL1431CPW
Reel of 2000
TL1431CPWR
Tube of 75
TL1431QD
Reel of 2500
TL1431QDR
Tube of 150
TL1431QPW
Reel of 2000
TL1431QPWR
CDIP – JG
Tube of 50
TL1431MJG
TL1431MJG
LCCC – FK
Tube of 55
TL1431MFK
TL1431MFK
TO-226 / TO-92 – LP
TSSOP – PW
SOIC – D
–40°C to 125°C
TSSOP – PW
–55°C to 125°C
(1)
(2)
TOP-SIDE MARKING
Reel of 3000
SOIC – D
0°C to 70°C
ORDERABLE PART NUMBER
OBSOLETE
1431C
TL1431C
T1431
TL1431QD
T1431QPW
For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
web site at www.ti.com.
Package drawings, thermal data, and symbolization are available at www.ti.com/packaging.
SYMBOL
REF
ANODE
CATHODE
FUNCTIONAL BLOCK DIAGRAM
CATHODE
+
−
REF
Vref
ANODE
2
Submit Documentation Feedback
Copyright © 1991–2012, Texas Instruments Incorporated
Product Folder Links: TL1431
TL1431
www.ti.com
SLVS062M – DECEMBER 1991 – REVISED APRIL 2012
EQUIVALENT SCHEMATIC
CATHODE
1
800 Ω
REF
800 Ω
8
20 pF
150 Ω
4 kΩ
3.28 kΩ
10 kΩ
2.4 kΩ
20 pF
7.2 kΩ
1 kΩ
800 Ω
ANODE
2, 3, 6, 7
A.
All component values are nominal.
B.
Pin numbers shown are for the D package.
Absolute Maximum Ratings (1)
over operating free-air temperature range (unless otherwise noted)
MIN
VKA
Cathode voltage (2)
IKA
Continuous cathode current range
II(ref)
Reference input current range
θJA
Package thermal impedance (3)
(4)
θJC
Package thermal impedance (5)
(6)
TJ
Operating virtual junction temperature
Lead temperature
Tstg
(1)
(2)
(3)
(4)
(5)
(6)
MAX
V
–100
150
mA
–0.05
10
mA
D package
97
LP package
140
PW package
149
FK package
5.61
JG package
14.5
1,6 mm (1/16 in) from case for 10 s
Storage temperature range
UNIT
37
–65
°C/W
°C/W
150
°C
260
°C
150
°C
Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
All voltage values are with respect to ANODE, unless otherwise noted.
Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable ambient
temperature is PD = (TJ(max) – TA)/θJA. Operating at the absolute maximum TJ of 150°C can affect reliability.
The package thermal impedance is calculated in accordance with JESD 51-7.
Maximum power dissipation is a function of TJ(max), θJC, and TC. The maximum allowable power dissipation at any allowable case
temperature is PD = (TJ(max) – TC)/θJC. Operating at the absolute maximum TJ of 150°C can affect reliability.
The package thermal impedance is calculated in accordance with MIL-STD-883.
Submit Documentation Feedback
Copyright © 1991–2012, Texas Instruments Incorporated
Product Folder Links: TL1431
3
TL1431
SLVS062M – DECEMBER 1991 – REVISED APRIL 2012
www.ti.com
Recommended Operating Conditions
MIN
MAX
VKA
Cathode voltage
VI(ref)
36
V
IKA
Cathode current
1
100
mA
TL1431C
0
70
TL1431Q
–40
125
TL1431M
–55
125
TA
Operating free-air temperature
UNIT
°C
Electrical Characteristics
at specified free-air temperature, IKA = 10 mA (unless otherwise noted)
PARAMETER
TEST CONDITIONS
(1)
25°C
VI(ref)
Reference input voltage
VKA = VI(ref)
VI(dev)
Deviation of reference input
voltage over full temperature
range (2)
VKA = VI(ref)
∆VI(ref)
∆VKA
Ratio of change in reference
input voltage to the change in ΔVKA = 3 V to 36 V
cathode voltage
II(ref)
Reference input current
R1 = 10 kΩ, R2 = ∞
II(dev)
Deviation of reference input
current over full temperature
range (2)
R1 = 10 kΩ, R2 = ∞
Imin
Minimum cathode current for
regulation
VKA = VI(ref)
Ioff
Off-state cathode current
VKA = 36 V, VI(ref) = 0
|zKA|
Output impedance (3)
VKA = VI(ref), f ≤ 1 kHz,
IKA = 1 mA to 100 mA
(1)
(2)
TA
Full range
TEST
CIRCUIT
Figure 1
TL1431C
MIN
TYP
MAX
2490
2500
2510
2480
2520
UNIT
mV
Full range
Figure 1
4
20
mV
Full range
Figure 2
–1.1
–2
mV/V
1.5
2.5
25°C
Full range
Figure 2
3
μA
Full range
Figure 2
0.2
1.2
μA
25°C
Figure 1
0.45
1
mA
0.18
0.5
25°C
Full range
25°C
Figure 3
2
Figure 1
0.2
0.4
μA
Ω
Full range is 0°C to 70°C for C-suffix devices.
The deviation parameters VI(dev) and II(dev) are defined as the differences between the maximum and minimum values obtained over the
rated temperature range. The average full-range temperature coefficient of the reference input voltage αVI(ref) is defined as:
αVI(ref)
=
( ppm
°C (
(
V(
I dev)
°
V ( ) at 25 C
I ref
(
6
× 10
Max VI(ref)
TA
VI(dev)
where:
∆TA is the rated operating temperature range of the device.
Min VI(ref)
˙TA
(3)
αVI(ref) is positive or negative, depending on whether minimum VI(ref) or maximum VI(ref), respectively, occurs at the lower temperature.
∆VKA
|zKA| =
∆IKA
The output impedance is defined as:
When the device is operating with two external resistors (see Figure 2), the total dynamic impedance of the circuit is given by:
|z'| = ∆V
|z | 1 + R1
R2 .
∆I , which is approximately equal to KA
(
4
(
Submit Documentation Feedback
Copyright © 1991–2012, Texas Instruments Incorporated
Product Folder Links: TL1431
TL1431
www.ti.com
SLVS062M – DECEMBER 1991 – REVISED APRIL 2012
Electrical Characteristics
at specified free-air temperature, IKA = 10 mA (unless otherwise noted)
PARAMETER
TEST CONDITIONS
TA
(1)
TEST
CIRCUIT
25°C
TL1431M
MIN
TYP
MAX
MIN
TYP
MAX
2490
2500
2510
2475
2500
2540
2530
2460
UNIT
VI(ref)
Reference input voltage
VKA = VI(ref)
VI(dev)
Deviation of reference
input voltage over full
temperature range (2)
VKA = VI(ref)
Full
range
Figure 1
17
55
17
55 (3)
∆VI(ref)
∆VKA
Ratio of change in
reference input voltage
to the change in
cathode voltage
ΔVKA = 3 V to 36 V
Full
range
Figure 2
–1.1
–2
–1.1
–2
1.5
2.5
1.5
2.5
II(ref)
Reference input current
R1 = 10 kΩ, R2 = ∞
II(dev)
Deviation of reference
input current over full
temperature range (2)
R1 = 10 kΩ, R2 = ∞
Full
range
Figure 2
0.5
2
0.5
3 (3)
μA
Imin
Minimum cathode
current for regulation
VKA = VI(ref)
25°C
Figure 1
0.45
1
0.45
1
mA
Off-state cathode
current
0.18
0.5
0.18
0.5
Ioff
VKA = 36 V, VI(ref) = 0
|zKA|
Output impedance (4)
VKA = VI(ref), f ≤ 1 kHz,
IKA = 1 mA to 100 mA
Full
range
Figure 1
TL1431Q
25°C
(1)
(2)
Full
range
2470
Figure 2
25°C
Full
range
Figure 3
25°C
Figure 1
2550
4
5
2
0.2
0.4
2
0.2
0.4
mV
mV
mV/V
μA
μA
Ω
Full range is –40°C to 125°C for Q-suffix devices and –55°C to 125°C for M-suffix devices.
The deviation parameters VI(dev) and II(dev) are defined as the differences between the maximum and minimum values obtained over the
rated temperature range. The average full-range temperature coefficient of the reference input voltage αVI(ref) is defined as:
αVI(ref)
=
( ppm
°C (
(
V(
I dev)
°
V ( ) at 25 C
I ref
(
6
× 10
Max VI(ref)
TA
VI(dev)
where:
∆TA is the rated operating temperature range of the device.
Min VI(ref)
˙TA
(3)
(4)
αVI(ref) is positive or negative, depending on whether minimum VI(ref) or maximum VI(ref), respectively, occurs at the lower temperature.
On products compliant to MIL-PRF-38535, this parameter is not production tested.
∆VKA
|zKA| =
∆IKA
The output impedance is defined as:
When the device is operating with two external resistors (see Figure 2), the total dynamic impedance of the circuit is given by:
|z'| = ∆V
|z | 1 + R1
R2 .
∆I , which is approximately equal to KA
(
(
Submit Documentation Feedback
Copyright © 1991–2012, Texas Instruments Incorporated
Product Folder Links: TL1431
5
TL1431
SLVS062M – DECEMBER 1991 – REVISED APRIL 2012
www.ti.com
PARAMETER MEASUREMENT INFORMATION
VKA
Input
Input
VKA
IKA
IKA
R1
VI(ref)
II(ref)
VI(ref)
R2
Figure 1. Test Circuit for V(KA) = Vref
ǒ
Ǔ
VKA + VI(ref) 1 ) R1 ) II(ref)
R2
R1
Figure 2. Test Circuit for V(KA) > Vref
Input
VKA
Ioff
Figure 3. Test Circuit for Ioff
TYPICAL CHARACTERISTICS
Data at high and low temperatures are applicable only within the recommended operating free-air temperature
ranges of the various devices.
Table of Graphs
GRAPH
FIGURE
Reference voltage vs Free-air temperature
Figure 4
Reference current vs Fire-air temperature
Figure 5
Cathode current vs Cathode voltage
Figure 6, Figure 7
Off-state cathode current vs Free-air temperature
Figure 8
Ratio of delta reference voltage to delta cathode voltage vs Free-air temperature
Figure 9
Equivalent input-noise voltage vs Frequency
Figure 10
Equivalent input-noise voltage over a 10-second period
Figure 11
Small-signal voltage amplification vs Frequency
Figure 12
Reference impedance vs Frequency
Figure 13
Pulse response
Figure 14
Stability boundary conditions
Figure 15
6
Submit Documentation Feedback
Copyright © 1991–2012, Texas Instruments Incorporated
Product Folder Links: TL1431
TL1431
www.ti.com
SLVS062M – DECEMBER 1991 – REVISED APRIL 2012
REFERENCE CURRENT
vs
FREE-AIR TEMPERATURE
REFERENCE VOLTAGE
vs
FREE-AIR TEMPERATURE
2.5
2.52
IKA = 10 mA
R1 = 10 kΩ
R2 = ∞
2.51
2.5
2.49
2.48
− 50
2
I I(ref) − Reference Current − µ A
VI(ref) − Reference Voltage − V
VI(ref) = VKA
IKA = 10 mA
0
− 25
25
50
75
100
1.5
1
0.5
0
− 50
125
− 25
TA − Free-Air Temperature − °C
0
25
50
75
100
TA − Free-Air Temperature − °C
Figure 4.
125
Figure 5.
CATHODE CURRENT
vs
CATHODE VOLTAGE
CATHODE CURRENT
vs
CATHODE VOLTAGE
150
800
VKA = VI(ref)
TA = 25°C
VKA = VI(ref)
TA = 25°C
600
I KA − Cathode Current − µ A
I KA − Cathode Current − mA
100
50
0
− 50
200
0
− 100
− 150
−3
400
−2
0
1
−1
VKA − Cathode Voltage − V
2
3
− 200
−2
−1
0
1
2
3
4
VKA − Cathode Voltage − V
Figure 6.
Figure 7.
Submit Documentation Feedback
Copyright © 1991–2012, Texas Instruments Incorporated
Product Folder Links: TL1431
7
TL1431
SLVS062M – DECEMBER 1991 – REVISED APRIL 2012
www.ti.com
OFF-STATE CATHODE CURRENT
vs
FREE-AIR TEMPERATURE
RATIO OF DELTA REFERENCE VOLTAGE TO
DELTA CATHODE VOLTAGE
vs
FREE-AIR TEMPERATURE
0.35
VKA = 36 V
VI(ref) = 0
−0.85
VKA = 3 V to 36 V
−0.95
0.3
∆V I(ref) /∆V KA − mV/V
I KA(off) − Off-State Cathode Current − µ A
0.4
0.25
0.2
0.15
0.1
0.05
0
−50
−1.05
−1.15
−1.25
−1.35
− 25
0
25
50
75
100
125
−1.45
−50
TA − Free-Air Temperature − °C
− 25
0
25
50
75
100
125
TA − Free-Air Temperature − °C
Figure 8.
Figure 9.
EQUIVALENT INPUT-NOISE VOLTAGE
vs
FREQUENCY
260
Hz
IO = 10 mA
TA = 25°C
Vn − Equivalent Input-Noise Voltage − nV/
240
220
200
180
160
140
120
100
10
100
1k
10 k
100 k
f − Frequency − Hz
Figure 10.
8
Submit Documentation Feedback
Copyright © 1991–2012, Texas Instruments Incorporated
Product Folder Links: TL1431
TL1431
www.ti.com
SLVS062M – DECEMBER 1991 – REVISED APRIL 2012
EQUIVALENT INPUT-NOISE VOLTAGE
OVER A 10-SECOND PERIOD
6
Vn − Equivalent Input-Noise Voltage − mV
5
4
3
2
1
0
−1
−2
−3
−4
f = 0.1 to 10 Hz
IKA = 10 mA
TA = 25°C
−5
−6
0
2
4
6
8
10
t − Time − s
19.1 V
1 kW
910 W
2000 µF
VCC
VCC
500 µF
TL1431
(DUT)
+
TLE2027
AV = 10 V/mV
−
16 W
820 W
1 mF
+
16 W
16 W
TLE2027
−
2.2 µF
1 µF
160 kW
33 kW
AV = 2 V/V
0.1 µF
CRO 1 MW
33 kW
VEE
VEE
TEST CIRCUIT FOR 0.1-Hz TO 10-Hz EQUIVALENT INPUT-NOISE VOLTAGE
Figure 11.
Submit Documentation Feedback
Copyright © 1991–2012, Texas Instruments Incorporated
Product Folder Links: TL1431
9
TL1431
SLVS062M – DECEMBER 1991 – REVISED APRIL 2012
www.ti.com
SMALL-SIGNAL VOLTAGE AMPLIFICATION
vs
FREQUENCY
AV − Small-Signal Voltage Amplification − dB
60
IKA = 10 mA
TA = 25°C
Output
I(K)
50
15 kW
40
230 W
9 mF
+
30
8.25 kW
−
20
GND
10
TEST CIRCUIT FOR VOLTAGE AMPLIFICATION
0
1k
10 k
100 k
1M
10 M
f − Frequency − Hz
Figure 12.
REFERENCE IMPEDANCE
vs
FREQUENCY
100
W
|zka
|z
KA | − Reference Impedance − O
IKA = 1 mA to 100 mA
TA = 25°C
1 kW
Output
I(K)
10
50 W
−
+
1
GND
TEST CIRCUIT FOR REFERENCE IMPEDANCE
0.1
1k
10 k
100 k
1M
10 M
f − Frequency − Hz
Figure 13.
10
Submit Documentation Feedback
Copyright © 1991–2012, Texas Instruments Incorporated
Product Folder Links: TL1431
TL1431
www.ti.com
SLVS062M – DECEMBER 1991 – REVISED APRIL 2012
PULSE RESPONSE
6
TA = 25°C
VI
Input
220 W
Output
Input and Output Voltages − V
5
4
Pulse
Generator
f = 100 kHz
3
Output
50 W
2
GND
1
TEST CIRCUIT FOR PULSE RESPONSE
0
0
1
2
3
4
t − Time − µs
5
6
7
Figure 14.
150 W
STABILITY BOUNDARY CONDITIONS
100
90
I KA − Cathode Current − mA
80
A-VKA = VI(ref)
B-VKA = 5 V
C-VKA = 10 V
D-VKA = 15 V
IKA
IKA = 10 mA
TA = 25°C
VI
+
CL
VBATT
−
70
Stable
60
Stable
B
C
TEST CIRCUIT FOR CURVE A
50
40
A
30
R1 =
10 kW
D
IKA
150 W
20
CL
10
VI
+
0
0.001
0.01
0.1
1
10
VBATT
R2
−
CL − Load Capacitance − µF
TEST CIRCUIT FOR CURVES B, C, AND D
A.
The areas under the curves represent conditions that may cause the device to oscillate. For curves B, C, and D, R2,
and V+ are adjusted to establish the initial VKA and IKA conditions, with CL = 0. VBATT and CL then are adjusted to
determine the ranges of stability.
Figure 15.
Submit Documentation Feedback
Copyright © 1991–2012, Texas Instruments Incorporated
Product Folder Links: TL1431
11
TL1431
SLVS062M – DECEMBER 1991 – REVISED APRIL 2012
www.ti.com
APPLICATION INFORMATION
Table 1. Table of Application Circuits
APPLICATION
FIGURE
Shunt regulator
Figure 16
Single-supply comparator with temperature-compensated threshold
Figure 17
Precision high-current series regulator
Figure 18
Output control of a three-terminal fixed regulator
Figure 19
Higher-current shunt regulator
Figure 20
Crowbar
Figure 21
Precision 5-V, 1.5-A, 0.5% regulator
Figure 22
5-V precision regulator
Figure 23
PWM converter with 0.5% reference
Figure 24
Voltage monitor
Figure 25
Delay timer
Figure 26
Precision current limiter
Figure 27
Precision constant-current sink
Figure 28
A.
R should provide cathode current ≥1 mA to the TL1431 at minimum V(BATT).
V(BATT)
R
V(BATT)
VO
R1
0.1%
VI(ref)
VO
Von ≈ 2 V
Voff ≈ V(BATT)
TL1431
R2
0.1%
Input
TL1431
VIT = 2.5 V
ǒ
Ǔ
VO + 1 ) R1 VI(ref)
R2
Figure 16. Shunt Regulator
A.
12
GND
Figure 17. Single-Supply Comparator With
Temperature-Compensated Threshold
R should provide cathode current ≥1 mA to the TL1431 at minimum V(BATT).
Submit Documentation Feedback
Copyright © 1991–2012, Texas Instruments Incorporated
Product Folder Links: TL1431
TL1431
www.ti.com
SLVS062M – DECEMBER 1991 – REVISED APRIL 2012
V(BATT)
V(BATT)
R
In
µA7805
2N2222
Out
VO
30 Ω
2N2222
TL1431
0.01 µF
R1
TL1431
R2
4.7 kΩ
VO
R1
0.1%
R2
0.1%
Ǔ
ǒ
ǒ
VO + 1 ) R1 VI(ref)
R2
Ǔ
V + 1 ) R1 V I(ref)
R2
Min V = VI(ref) + 5 V
Figure 18. Precision High-Current Series Regulator
A.
Common
Figure 19. Output Control of a Three-Terminal
Fixed Regulator
Refer to the stability boundary conditions in Figure 15 to determine allowable values for C.
R
V(BATT)
VO
V(BATT)
VO
R1
R1
TL1431
C
R2
R2
TL1431
ǒ
ǒ
Figure 20. Higher-Current Shunt Regulator
A.
Ǔ
Vtrip + 1 ) R1 VI(ref)
R2
Ǔ
VO + 1 ) R1 VI(ref)
R2
Figure 21. Crowbar
Rb should provide cathode current ≥1 mA to the TL1431.
In
V(BATT)
V(BATT)
Out
VO = 5 V
VO = 5 V, 1.5 A, 0.5%
LM317
Rb
8.2 kΩ
Adjust
TL1431
243 Ω
0.1%
27.4 kΩ
0.1%
TL1431
243 Ω
0.1%
27.4 kΩ
0.1%
Figure 22. Precision 5-V, 1.5-A, 0.5% Regulator
Figure 23. 5-V Precision Regulator
Submit Documentation Feedback
Copyright © 1991–2012, Texas Instruments Incorporated
Product Folder Links: TL1431
13
TL1431
SLVS062M – DECEMBER 1991 – REVISED APRIL 2012
www.ti.com
12 V
6.8 kΩ
VCC
10 kΩ
5 V +0.5%
−
10 kΩ
0.1%
TL1431
+
X
Not
Used
10 kΩ
0.1%
TL598
Feedback
Figure 24. PWM Converter With 0.5% Reference
A.
Select R3 and R4 to provide the desired LED intensity and cathode current ≥1 mA to the TL1431.
680 Ω
R3
V(BATT)
12 V
R1B
R1A
TL1431
R4
2 kΩ
R
TL1431
R2A
TL1431
R2B
On
C
Off
ǒ
Ǔ
High Limit + ǒ1 ) R1AǓV I(ref)
R2A
Low Limit + 1 ) R1B V I(ref)
R2B
LED on When
Low Limit < V(BATT) < High Limit
Delay + R
Figure 25. Voltage Monitor
C
I
12 V
I (12 V) * V
I(ref)
Figure 26. Delay Timer
RCL 0.1%
V(BATT)
IO
V(BATT)
IO
R1
TL1431
TL1431
RS
0.1%
V
I(ref)
) IKA
IO +
R CL
V
R1 +
(BATT)
ǒ Ǔ
I
O
h FE
V
)I
IO +
KA
Figure 27. Precision Current Limiter
14
I(ref)
RS
Figure 28. Precision Constant-Current Sink
Submit Documentation Feedback
Copyright © 1991–2012, Texas Instruments Incorporated
Product Folder Links: TL1431
TL1431
www.ti.com
SLVS062M – DECEMBER 1991 – REVISED APRIL 2012
REVISION HISTORY
Changes from Revision October 2007 (N) to Revision M
•
Page
Added Ammo option to the LP package in the ORDERING INFORMATION table. ............................................................ 2
Submit Documentation Feedback
Copyright © 1991–2012, Texas Instruments Incorporated
Product Folder Links: TL1431
15
PACKAGE OPTION ADDENDUM
www.ti.com
10-Aug-2016
PACKAGING INFORMATION
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
MSL Peak Temp
(2)
(6)
(3)
Op Temp (°C)
Device Marking
(4/5)
5962-9962001Q2A
ACTIVE
LCCC
FK
20
1
TBD
POST-PLATE
N / A for Pkg Type
-55 to 125
59629962001Q2A
TL1431MFKB
5962-9962001QPA
ACTIVE
CDIP
JG
8
1
TBD
A42
N / A for Pkg Type
-55 to 125
9962001QPA
TL1431M
TL1431CD
ACTIVE
SOIC
D
8
75
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
1431C
TL1431CDE4
ACTIVE
SOIC
D
8
75
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
1431C
TL1431CDG4
ACTIVE
SOIC
D
8
75
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
1431C
TL1431CDR
ACTIVE
SOIC
D
8
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
1431C
TL1431CDRE4
ACTIVE
SOIC
D
8
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
1431C
TL1431CDRG4
ACTIVE
SOIC
D
8
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
1431C
TL1431CKTPR
OBSOLETE
PFM
KTP
2
TBD
Call TI
Call TI
0 to 70
TL1431CLP
ACTIVE
TO-92
LP
3
1000
Pb-Free
(RoHS)
CU SN
N / A for Pkg Type
0 to 70
TL1431C
TL1431CLPE3
ACTIVE
TO-92
LP
3
1000
Pb-Free
(RoHS)
CU SN
N / A for Pkg Type
0 to 70
TL1431C
TL1431CLPM
OBSOLETE
TO-92
LP
3
TBD
Call TI
Call TI
0 to 70
TL1431CLPME3
ACTIVE
TO-92
LP
3
2000
Pb-Free
(RoHS)
CU SN
N / A for Pkg Type
0 to 70
TL1431C
TL1431CLPR
ACTIVE
TO-92
LP
3
2000
Pb-Free
(RoHS)
CU SN
N / A for Pkg Type
0 to 70
TL1431C
TL1431CLPRE3
ACTIVE
TO-92
LP
3
2000
Pb-Free
(RoHS)
CU SN
N / A for Pkg Type
0 to 70
TL1431C
TL1431CPW
ACTIVE
TSSOP
PW
8
TBD
Call TI
Call TI
0 to 70
T1431
TL1431CPWR
ACTIVE
TSSOP
PW
8
Green (RoHS
& no Sb/Br)
CU NIPDAU | CU SN
Level-1-260C-UNLIM
0 to 70
T1431
2000
Addendum-Page 1
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
10-Aug-2016
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
MSL Peak Temp
(2)
(6)
(3)
Op Temp (°C)
Device Marking
(4/5)
TL1431CPWRG4
ACTIVE
TSSOP
PW
8
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
TL1431MFK
ACTIVE
LCCC
FK
20
1
TBD
POST-PLATE
N / A for Pkg Type
-55 to 125
TL1431MFK
TL1431MFKB
ACTIVE
LCCC
FK
20
1
TBD
POST-PLATE
N / A for Pkg Type
-55 to 125
59629962001Q2A
TL1431MFKB
TL1431MJG
ACTIVE
CDIP
JG
8
1
TBD
A42
N / A for Pkg Type
-55 to 125
TL1431MJG
TL1431MJGB
ACTIVE
CDIP
JG
8
1
TBD
A42
N / A for Pkg Type
-55 to 125
9962001QPA
TL1431M
TL1431QD
ACTIVE
SOIC
D
8
75
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 125
1431Q
TL1431QDG4
ACTIVE
SOIC
D
8
75
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 125
1431Q
TL1431QDR
ACTIVE
SOIC
D
8
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 125
1431Q
TL1431QDRG4
ACTIVE
SOIC
D
8
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 125
1431Q
TL1431QLP
OBSOLETE
TO-92
LP
3
TBD
Call TI
Call TI
-40 to 125
TL1431QLPR
OBSOLETE
TO-92
LP
3
TBD
Call TI
Call TI
-40 to 125
TL1431QPWR
OBSOLETE
TSSOP
PW
8
TL1431QPWRG4
ACTIVE
TSSOP
PW
8
2000
TBD
Call TI
Call TI
-40 to 125
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 125
T1431
1431Q
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Addendum-Page 2
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
10-Aug-2016
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3)
MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
(4)
There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.
(5)
Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation
of the previous line and the two combined represent the entire Device Marking for that device.
(6)
Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish
value exceeds the maximum column width.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
OTHER QUALIFIED VERSIONS OF TL1431, TL1431M :
• Catalog: TL1431
• Automotive: TL1431-Q1, TL1431-Q1
• Enhanced Product: TL1431-EP, TL1431-EP
• Military: TL1431M
• Space: TL1431-SP, TL1431-SP
NOTE: Qualified Version Definitions:
• Catalog - TI's standard catalog product
Addendum-Page 3
PACKAGE OPTION ADDENDUM
www.ti.com
10-Aug-2016
• Automotive - Q100 devices qualified for high-reliability automotive applications targeting zero defects
• Enhanced Product - Supports Defense, Aerospace and Medical Applications
• Military - QML certified for Military and Defense Applications
• Space - Radiation tolerant, ceramic packaging and qualified for use in Space-based application
Addendum-Page 4
PACKAGE MATERIALS INFORMATION
www.ti.com
28-Apr-2016
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
Package Package Pins
Type Drawing
SPQ
Reel
Reel
A0
Diameter Width (mm)
(mm) W1 (mm)
B0
(mm)
K0
(mm)
P1
(mm)
W
Pin1
(mm) Quadrant
TL1431CDR
SOIC
D
8
2500
330.0
12.4
6.4
5.2
2.1
8.0
12.0
Q1
TL1431CPWR
TSSOP
PW
8
2000
330.0
12.4
7.0
3.6
1.6
8.0
12.0
Q1
TL1431CPWRG4
TSSOP
PW
8
2000
330.0
12.4
7.0
3.6
1.6
8.0
12.0
Q1
TL1431QDR
SOIC
D
8
2500
330.0
12.4
6.4
5.2
2.1
8.0
12.0
Q1
TL1431QPWRG4
TSSOP
PW
8
2000
330.0
12.4
7.0
3.6
1.6
8.0
12.0
Q1
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
28-Apr-2016
*All dimensions are nominal
Device
Package Type
Package Drawing
Pins
SPQ
Length (mm)
Width (mm)
Height (mm)
TL1431CDR
SOIC
D
8
2500
340.5
338.1
20.6
TL1431CPWR
TSSOP
PW
8
2000
367.0
367.0
35.0
TL1431CPWRG4
TSSOP
PW
8
2000
367.0
367.0
35.0
TL1431QDR
SOIC
D
8
2500
340.5
338.1
20.6
TL1431QPWRG4
TSSOP
PW
8
2000
367.0
367.0
35.0
Pack Materials-Page 2
MECHANICAL DATA
MCER001A – JANUARY 1995 – REVISED JANUARY 1997
JG (R-GDIP-T8)
CERAMIC DUAL-IN-LINE
0.400 (10,16)
0.355 (9,00)
8
5
0.280 (7,11)
0.245 (6,22)
1
0.063 (1,60)
0.015 (0,38)
4
0.065 (1,65)
0.045 (1,14)
0.310 (7,87)
0.290 (7,37)
0.020 (0,51) MIN
0.200 (5,08) MAX
Seating Plane
0.130 (3,30) MIN
0.023 (0,58)
0.015 (0,38)
0°–15°
0.100 (2,54)
0.014 (0,36)
0.008 (0,20)
4040107/C 08/96
NOTES: A.
B.
C.
D.
E.
All linear dimensions are in inches (millimeters).
This drawing is subject to change without notice.
This package can be hermetically sealed with a ceramic lid using glass frit.
Index point is provided on cap for terminal identification.
Falls within MIL STD 1835 GDIP1-T8
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
PACKAGE OUTLINE
PW0008A
TSSOP - 1.2 mm max height
SCALE 2.800
SMALL OUTLINE PACKAGE
C
6.6
TYP
6.2
SEATING PLANE
PIN 1 ID
AREA
A
0.1 C
6X 0.65
8
1
3.1
2.9
NOTE 3
2X
1.95
4
5
B
4.5
4.3
NOTE 4
SEE DETAIL A
8X
0.30
0.19
0.1
C A
1.2 MAX
B
(0.15) TYP
0.25
GAGE PLANE
0 -8
0.15
0.05
0.75
0.50
DETAIL A
TYPICAL
4221848/A 02/2015
NOTES:
1. All linear dimensions are in millimeters. Any dimensions in parenthesis are for reference only. Dimensioning and tolerancing
per ASME Y14.5M.
2. This drawing is subject to change without notice.
3. This dimension does not include mold flash, protrusions, or gate burrs. Mold flash, protrusions, or gate burrs shall not
exceed 0.15 mm per side.
4. This dimension does not include interlead flash. Interlead flash shall not exceed 0.25 mm per side.
5. Reference JEDEC registration MO-153, variation AA.
www.ti.com
EXAMPLE BOARD LAYOUT
PW0008A
TSSOP - 1.2 mm max height
SMALL OUTLINE PACKAGE
8X (1.5)
8X (0.45)
SYMM
1
8
(R0.05)
TYP
SYMM
6X (0.65)
5
4
(5.8)
LAND PATTERN EXAMPLE
SCALE:10X
SOLDER MASK
OPENING
METAL
SOLDER MASK
OPENING
METAL UNDER
SOLDER MASK
0.05 MAX
ALL AROUND
0.05 MIN
ALL AROUND
SOLDER MASK
DEFINED
NON SOLDER MASK
DEFINED
SOLDER MASK DETAILS
NOT TO SCALE
4221848/A 02/2015
NOTES: (continued)
6. Publication IPC-7351 may have alternate designs.
7. Solder mask tolerances between and around signal pads can vary based on board fabrication site.
www.ti.com
EXAMPLE STENCIL DESIGN
PW0008A
TSSOP - 1.2 mm max height
SMALL OUTLINE PACKAGE
8X (1.5)
8X (0.45)
SYMM
(R0.05) TYP
1
8
SYMM
6X (0.65)
5
4
(5.8)
SOLDER PASTE EXAMPLE
BASED ON 0.125 mm THICK STENCIL
SCALE:10X
4221848/A 02/2015
NOTES: (continued)
8. Laser cutting apertures with trapezoidal walls and rounded corners may offer better paste release. IPC-7525 may have alternate
design recommendations.
9. Board assembly site may have different recommendations for stencil design.
www.ti.com
MECHANICAL DATA
MPSF001F – JANUARY 1996 – REVISED JANUARY 2002
KTP (R-PSFM-G2)
PowerFLEX PLASTIC FLANGE-MOUNT PACKAGE
0.080 (2,03)
0.070 (1,78)
0.243 (6,17)
0.233 (5,91)
0.228 (5,79)
0.218 (5,54)
0.050 (1,27)
0.040 (1,02)
0.010 (0,25) NOM
0.130 (3,30) NOM
0.215 (5,46)
NOM
0.247 (6,27)
0.237 (6,02)
Thermal Tab
(See Note C)
0.287 (7,29)
0.277 (7,03)
0.381 (9,68)
0.371 (9,42)
0.100 (2,54)
0.090 (2,29)
0.032 (0,81) MAX
Seating Plane
0.090 (2,29)
0.180 (4,57)
0.004 (0,10)
0.005 (0,13)
0.001 (0,02)
0.031 (0,79)
0.025 (0,63)
0.010 (0,25) M
0.010 (0,25) NOM
Gage Plane
0.047 (1,19)
0.037 (0,94)
0.010 (0,25)
2°–ā6°
4073388/M 01/02
NOTES: A.
B.
C.
D.
E.
All linear dimensions are in inches (millimeters).
This drawing is subject to change without notice.
The center lead is in electrical contact with the thermal tab.
Dimensions do not include mold protrusions, not to exceed 0.006 (0,15).
Falls within JEDEC TO-252 variation AC.
PowerFLEX is a trademark of Texas Instruments.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
1
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of
non-designated products, TI will not be responsible for any failure to meet ISO/TS16949.
Products
Applications
Audio
www.ti.com/audio
Automotive and Transportation
www.ti.com/automotive
Amplifiers
amplifier.ti.com
Communications and Telecom
www.ti.com/communications
Data Converters
dataconverter.ti.com
Computers and Peripherals
www.ti.com/computers
DLP® Products
www.dlp.com
Consumer Electronics
www.ti.com/consumer-apps
DSP
dsp.ti.com
Energy and Lighting
www.ti.com/energy
Clocks and Timers
www.ti.com/clocks
Industrial
www.ti.com/industrial
Interface
interface.ti.com
Medical
www.ti.com/medical
Logic
logic.ti.com
Security
www.ti.com/security
Power Mgmt
power.ti.com
Space, Avionics and Defense
www.ti.com/space-avionics-defense
Microcontrollers
microcontroller.ti.com
Video and Imaging
www.ti.com/video
RFID
www.ti-rfid.com
OMAP Applications Processors
www.ti.com/omap
TI E2E Community
e2e.ti.com
Wireless Connectivity
www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2016, Texas Instruments Incorporated
工商网监
湘ICP备2023018690号
