TL4050B25QDBZT

TL4050 www.ti.com........................................................................................................................................................ SLOS486A – JUNE 2007 – REVISED AUGUST 2009 PRECISION MICROPOWER SHUNT VOLTAGE REFERENCE FEATURES APPLICATIONS • • • • • • • • • 1 • • • • • Fixed Output Voltages of 2.5 V, 4.096 V, 5 V, and 10 V Tight Output Tolerances and Low Temperature Coefficient – Max 0.1%, 50 ppm/°C – A Grade – Max 0.2%, 50 ppm/°C – B Grade – Max 0.5%, 50 ppm/°C – C Grade Low Output Noise: 41 µVRMS Typ Wide Operating Current Range: 60 µA Typ to 15 mA Stable With All Capacitive Loads; No Output Capacitor Required Available in Extended Temperature Range: –40°C to 125°C DBZ (SOT-23-3) PACKAGE (TOP VIEW) CATHODE 1 3 * ANODE 2 « Pin 3 is attached to Substrate and must be connected to ANODE or left open. Data-Acquisition Systems Power Supplies and Power-Supply Monitors Instrumentation and Test Equipment Process Controls Precision Audio Automotive Electronics Energy Management Battery-Powered Equipment DCK (SC-70) PACKAGE (TOP VIEW) ANODE NC CATHODE 1 5 NC 4 NC 2 3 NC – No internal connection DESCRIPTION/ORDERING INFORMATION The TL4050 series of shunt voltage references are versatile easy-to-use references suitable for a wide array of applications. The two-terminal fixed-output device requires no external capacitors for operation and is stable with all capacitive loads. Additionally, the reference offers low dynamic impedance, low noise, and low temperature coefficient to ensure a stable output voltage over a wide range of operating currents and temperatures. The TL4050 is offered in three initial tolerances, ranging from 0.1% (max) for the A grade to 0.5% (max) for the C grade. Thus, a great deal of flexibility is offered to designers in choosing the best cost-to-performance ratio for their applications. Packaged in the space-saving SOT-23-3 and SC-70 packages and requiring a minimum current of 45 µA (typ), the TL4050 also is ideal for portable applications. The TL4050xI is characterized for operation over an ambient temperature range of –40°C to 85°C. The TL4050xQ is characterized for operation over an ambient temperature range of –40°C to 125°C. 1 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright © 2007–2009, Texas Instruments Incorporated TL4050 SLOS486A – JUNE 2007 – REVISED AUGUST 2009........................................................................................................................................................ www.ti.com ORDERING INFORMATION (1) TA DEVICE GRADE PACKAGE (2) VKA SOT-23-3 – DBZ 2.5 V SC-70 – DCK SOT-23-3 – DBZ A grade: 0.1% initial accuracy and 50 ppm/°C temperature coefficient 4.096 V SC-70 – DCK SOT-23-3 – DBZ 5V SC-70 – DCK SOT-23-3 – DBZ 10 V SC-70 – DCK –40°C to 85°C SOT-23-3 – DBZ 2.5 V SC-70 – DCK SOT-23-3 – DBZ B grade: 0.2% initial accuracy and 50 ppm/°C temperature coefficient 4.096 V SC-70 – DCK SOT-23-3 – DBZ 5V SC-70 – DCK SOT-23-3 – DBZ 10 V SC-70 – DCK (1) (2) (3) 2 ORDERABLE PART NUMBER Reel of 3000 TL4050A25IDBZR Reel of 250 TL4050A25IDBZT Reel of 3000 TL4050A25IDCKR Reel of 250 TL4050A25IDCKT Reel of 3000 TL4050A41IDBZR Reel of 250 TL4050A41IDBZT Reel of 3000 TL4050A41IDCKR Reel of 250 TL4050A41IDCKT Reel of 3000 TL4050A50IDBZR Reel of 250 TL4050A50IDBZT Reel of 3000 TL4050A50IDCKR Reel of 250 TL4050A50IDCKT Reel of 3000 TL4050A10IDBZR Reel of 250 TL4050A10IDBZT Reel of 3000 TL4050A10IDCKR Reel of 250 TL4050A10IDCKT Reel of 3000 TL4050B25IDBZR Reel of 250 TL4050B25IDBZT Reel of 3000 TL4050B25IDCKR Reel of 250 TL4050B25IDCKT Reel of 3000 TL4050B41IDBZR Reel of 250 TL4050B41IDBZT Reel of 3000 TL4050B41IDCKR Reel of 250 TL4050B41IDCKT Reel of 3000 TL4050B50IDBZR Reel of 250 TL4050B50IDBZT Reel of 3000 TL4050B50IDCKR Reel of 250 TL4050B50IDCKT Reel of 3000 TL4050B10IDBZR Reel of 250 TL4050B10IDBZT Reel of 3000 TL4050B10IDCKR Reel of 250 TL4050B10IDCKT TOP-SIDE MARKING (3) TKE_ 82_ TKL_ 8E_ TKS_ 8L_ TK2_ 8Z_ TKF_ 83_ TKM_ 8F_ TKT_ 8M_ TK3_ 92_ For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI web site at www.ti.com. Package drawings, thermal data, and symbolization are available at www.ti.com/packaging. The actual top-side marking has one additional character that designates the wafer fab/assembly site. Submit Documentation Feedback Copyright © 2007–2009, Texas Instruments Incorporated Product Folder Link(s): TL4050 TL4050 www.ti.com........................................................................................................................................................ SLOS486A – JUNE 2007 – REVISED AUGUST 2009 ORDERING INFORMATION (continued) TA DEVICE GRADE PACKAGE (2) VKA SOT-23-3 – DBZ 2.5 V SC-70 – DCK SOT-23-3 – DBZ –40°C to 85°C C grade: 0.5% initial accuracy and 50 ppm/°C temperature coefficient 4.096 V SC-70 – DCK SOT-23-3 – DBZ 5V SC-70 – DCK SOT-23-3 – DBZ 10 V SC-70 – DCK SOT-23-3 – DBZ 2.5 V SC-70 – DCK SOT-23-3 – DBZ –40°C to 125°C A grade: 0.1% initial accuracy and 50 ppm/°C temperature coefficient 4.096 V SC-70 – DCK SOT-23-3 – DBZ 5V SC-70 – DCK SOT-23-3 – DBZ 10 V SC-70 – DCK ORDERABLE PART NUMBER Reel of 3000 TL4050C25IDBZR Reel of 250 TL4050C25IDBZT Reel of 3000 TL4050C25IDCKR Reel of 250 TL4050C25IDCKT Reel of 3000 TL4050C41IDBZR Reel of 250 TL4050C41IDBZT Reel of 3000 TL4050C41IDCKR Reel of 250 TL4050C41IDCKT Reel of 3000 TL4050C50IDBZR Reel of 250 TL4050C50IDBZT Reel of 3000 TL4050C50IDCKR Reel of 250 TL4050C50IDCKT Reel of 3000 TL4050C10IDBZR Reel of 250 TL4050C10IDBZT Reel of 3000 TL4050C10IDCKR Reel of 250 TL4050C10IDCKT Reel of 3000 TL4050A25QDBZR Reel of 250 TL4050A25QDBZT Reel of 3000 TL4050A25QDCKR Reel of 250 TL4050A25QDCKT Reel of 3000 TL4050A41QDBZR Reel of 250 TL4050A41QDBZT Reel of 3000 TL4050A41QDCKR Reel of 250 TL4050A41QDCKT Reel of 3000 TL4050A50QDBZR Reel of 250 TL4050A50QDBZT Reel of 3000 TL4050A50QDCKR Reel of 250 TL4050A50QDCKT Reel of 3000 TL4050A10QDBZR Reel of 250 TL4050A10QDBZT Reel of 3000 TL4050A10QDCKR Reel of 250 TL4050A10QDCKT TOP-SIDE MARKING (3) TKG_ 84_ TKN_ 8G_ TKU_ 8N_ TK4_ 93_ TKH_ 85_ TKP_ 8H_ TKV_ 8P_ TK5_ 94_ Submit Documentation Feedback Copyright © 2007–2009, Texas Instruments Incorporated Product Folder Link(s): TL4050 3 TL4050 SLOS486A – JUNE 2007 – REVISED AUGUST 2009........................................................................................................................................................ www.ti.com ORDERING INFORMATION (continued) TA DEVICE GRADE PACKAGE (2) VKA SOT-23-3 – DBZ 2.5 V SC-70 – DCK SOT-23-3 – DBZ B grade: 0.2% initial accuracy and 50 ppm/°C temperature coefficient 4.096 V SC-70 – DCK SOT-23-3 – DBZ 5V SC-70 – DCK SOT-23-3 – DBZ 10 V SC-70 – DCK –40°C to 125°C SOT-23-3 – DBZ 2.5 V SC-70 – DCK SOT-23-3 – DBZ C grade: 0.5% initial accuracy and 50 ppm/°C temperature coefficient 4.096 V SC-70 – DCK SOT-23-3 – DBZ 5V SC-70 – DCK SOT-23-3 – DBZ 10 V SC-70 – DCK 4 ORDERABLE PART NUMBER Reel of 3000 TL4050B25QDBZR Reel of 250 TL4050B25QDBZT Reel of 3000 TL4050B25QDCKR Reel of 250 TL4050B25QDCKT Reel of 3000 TL4050B41QDBZR Reel of 250 TL4050B41QDBZT Reel of 3000 TL4050B41QDCKR Reel of 250 TL4050B41QDCKT Reel of 3000 TL4050B50QDBZR Reel of 250 TL4050B50QDBZT Reel of 3000 TL4050B50QDCKR Reel of 250 TL4050B50QDCKT Reel of 3000 TL4050B10QDBZR Reel of 250 TL4050B10QDBZT Reel of 3000 TL4050B10QDCKR Reel of 250 TL4050B10QDCKT Reel of 3000 TL4050C25QDBZR Reel of 250 TL4050C25QDBZT Reel of 3000 TL4050C25QDCKR Reel of 250 TL4050C25QDCKT Reel of 3000 TL4050C41QDBZR Reel of 250 TL4050C41QDBZT Reel of 3000 TL4050C41QDCKR Reel of 250 TL4050C41QDCKT Reel of 3000 TL4050C50QDBZR Reel of 250 TL4050C50QDBZT Reel of 3000 TL4050C50QDCKR Reel of 250 TL4050C50QDCKT Reel of 3000 TL4050C10QDBZR Reel of 250 TL4050C10QDBZT Reel of 3000 TL4050C10QDCKR Reel of 250 TL4050C10QDCKT Submit Documentation Feedback TOP-SIDE MARKING (3) TKJ_ 86_ TKQ_ 8J_ TKW_ 8R_ TK6_ 95_ TKK_ 87_ TKR_ 8K_ TKY_ 8S_ TK7_ 96_ Copyright © 2007–2009, Texas Instruments Incorporated Product Folder Link(s): TL4050 TL4050 www.ti.com........................................................................................................................................................ SLOS486A – JUNE 2007 – REVISED AUGUST 2009 FUNCTIONAL BLOCK DIAGRAM CATHODE + _ ANODE ABSOLUTE MAXIMUM RATINGS (1) over free-air temperature range (unless otherwise noted) IZ Continuous cathode current θJA Package thermal impedance (2) (3) TJ Operating virtual junction temperature Tstg Storage temperature range (1) (2) (3) MIN MAX –10 20 DBV package 206 DCK package 252 –65 UNIT mA °C/W 150 °C 150 °C Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable ambient temperature is PD = (TJ(max) – TA)/θJA. Operating at the absolute maximum TJ of 150°C can affect reliability. The package thermal impedance is calculated in accordance with JESD 51-7. RECOMMENDED OPERATING CONDITIONS IZ TA (1) MIN MAX (1) 15 I temperature –40 85 Q temperature –40 125 Cathode current Free-air temperature UNIT mA °C See parametric tables Submit Documentation Feedback Copyright © 2007–2009, Texas Instruments Incorporated Product Folder Link(s): TL4050 5 TL4050 SLOS486A – JUNE 2007 – REVISED AUGUST 2009........................................................................................................................................................ www.ti.com TL4050x25I ELECTRICAL CHARACTERISTICS at industrial temperature range, full range TA = –40°C to 85°C (unless otherwise noted) PARAMETER TEST CONDITIONS TA TL4050A25I MIN TYP TL4050B25I MAX MIN TYP TL4050C25I MAX MIN TYP MAX VZ Reverse breakdown voltage IZ = 100 µA 25°C Reverse breakdown IZ = 100 µA voltage tolerance 25°C –2.5 2.5 –5 5 –13 13 ΔVZ Full range –11 11 –14 14 –21 21 IZ,min Minimum cathode current IZ = 10 mA 25°C ±20 ±20 ±20 IZ = 1 mA 25°C ±15 ±15 ±15 αVZ Average temperature coefficient of reverse breakdown voltage 25°C ±15 ±15 ±15 Reverse breakdown voltage change with cathode current change IZ,min < IZ < 1 mA 25°C IZ = 100 µA 1 mA < IZ < 15 mA I = 1 mA, Reverse dynamic Z f = 120 Hz, impedance IAC = 0.1 IZ eN Wideband noise IZ = 100 µA, 10 Hz ≤ f ≤ 10 kHz Long-term stability of reverse breakdown voltage Thermal hysteresis (1) (1) 6 2.5 60 41 65 Full range 0.3 0.8 Full range 6 60 41 0.3 0.8 8 6 mV 60 µA ppm/°C ±50 0.3 1.2 2.3 V 65 ±50 1.2 2.3 2.5 65 ±50 Full range 25°C ZZ VHYST 41 Full range 25°C DVZ DI Z 2.5 UNIT 0.8 1.2 2.3 8 6 mV 8 25°C 0.3 0.3 0.3 Ω 25°C 41 41 41 µVRMS t = 1000 h, TA = 25°C ± 0.1°C, IZ = 100 µA 120 120 120 ppm ΔTA = –40°C to 125°C 0.7 0.7 0.7 mV Thermal hysteresis is defined as VZ,25°C (after cycling to –40°C) – VZ,25°C (after cycling to 125°C). Submit Documentation Feedback Copyright © 2007–2009, Texas Instruments Incorporated Product Folder Link(s): TL4050 TL4050 www.ti.com........................................................................................................................................................ SLOS486A – JUNE 2007 – REVISED AUGUST 2009 TL4050x25Q ELECTRICAL CHARACTERISTICS at extended temperature range, full range TA = –40°C to 125°C (unless otherwise noted) PARAMETER TEST CONDITIONS TA TL4050A25Q MIN TYP TL4050B25Q MAX MIN TYP TL4050C25Q MAX MIN TYP MAX VZ Reverse breakdown voltage IZ = 100 µA 25°C Reverse breakdown IZ = 100 µA voltage tolerance 25°C –2.5 2.5 –5 5 –13 13 ΔVZ Full range –15 15 –18 18 –25 25 IZ,min Minimum cathode current IZ = 10 mA 25°C ±20 ±20 ±20 IZ = 1 mA 25°C ±15 ±15 ±15 αVZ Average temperature coefficient of reverse breakdown voltage 25°C ±15 ±15 ±15 Reverse breakdown voltage change with cathode current change IZ,min < IZ < 1 mA 25°C IZ = 100 µA 1 mA < IZ < 15 mA I = 1 mA, Reverse dynamic Z f = 120 Hz, impedance IAC = 0.1 IZ eN Wideband noise IZ = 100 µA, 10 Hz ≤ f ≤ 10 kHz Long-term stability of reverse breakdown voltage Thermal hysteresis (1) (1) 2.5 60 41 65 Full range 0.3 0.8 Full range 6 60 41 0.3 0.8 8 6 mV 60 µA ppm/°C ±50 0.3 1.2 2.3 V 65 ±50 1.2 2.3 2.5 65 ±50 Full range 25°C ZZ VHYST 41 Full range 25°C DVZ DI Z 2.5 UNIT 0.8 1.2 2.3 8 6 mV 8 25°C 0.3 0.3 0.3 Ω 25°C 41 41 41 µVRMS t = 1000 h, TA = 25°C ± 0.1°C, IZ = 100 µA 120 120 120 ppm ΔTA = –40°C to 125°C 0.7 0.7 0.7 mV Thermal hysteresis is defined as VZ,25°C (after cycling to –40°C) – VZ,25°C (after cycling to 125°C). Submit Documentation Feedback Copyright © 2007–2009, Texas Instruments Incorporated Product Folder Link(s): TL4050 7 TL4050 SLOS486A – JUNE 2007 – REVISED AUGUST 2009........................................................................................................................................................ www.ti.com TL4050x41I ELECTRICAL CHARACTERISTICS at industrial temperature range, full range TA = –40°C to 85°C (unless otherwise noted) PARAMETER TEST CONDITIONS TA TL4050A41I MIN TYP TL4050B41I MAX MIN TYP TL4050C41I MAX MIN TYP MAX VZ Reverse breakdown voltage IZ = 100 µA 25°C Reverse breakdown IZ = 100 µA voltage tolerance 25°C –4.1 4.1 –8.2 8.2 –21 21 ΔVZ Full range –18 18 –22 22 –34 34 IZ,min Minimum cathode current IZ = 10 mA 25°C ±30 ±30 ±30 IZ = 1 mA 25°C ±20 ±20 ±20 αVZ Average temperature coefficient of reverse breakdown voltage 25°C ±20 ±20 ±20 Reverse breakdown voltage change with cathode current change IZ,min < IZ < 1 mA 25°C IZ = 100 µA 1 mA < IZ < 15 mA I = 1 mA, Reverse dynamic Z f = 120 Hz, impedance IAC = 0.1 IZ eN Wideband noise IZ = 100 µA, 10 Hz ≤ f ≤ 10 kHz Long-term stability of reverse breakdown voltage t = 1000 h, TA = 25°C ± 0.1°C, IZ = 100 µA Thermal hysteresis (1) ΔTA = –40°C to 125°C (1) 8 4.096 68 52 73 Full range 0.2 0.9 Full range 7 68 52 0.2 0.9 10 7 mV 68 µA ppm/°C ±50 0.2 1.2 2 V 73 ±50 1.2 2 4.096 73 ±50 Full range 25°C ZZ VHYST 52 Full range 25°C DVZ DI Z 4.096 UNIT 0.9 1.2 2 10 7 mV 10 25°C 0.5 0.5 0.5 Ω 25°C 93 93 93 µVRMS 120 120 120 ppm 1.148 1.148 1.148 mV Thermal hysteresis is defined as VZ,25°C (after cycling to –40°C) – VZ,25°C (after cycling to 125°C). Submit Documentation Feedback Copyright © 2007–2009, Texas Instruments Incorporated Product Folder Link(s): TL4050 TL4050 www.ti.com........................................................................................................................................................ SLOS486A – JUNE 2007 – REVISED AUGUST 2009 TL4050x41Q ELECTRICAL CHARACTERISTICS at extended temperature range, full range TA = –40°C to 125°C (unless otherwise noted) PARAMETER TEST CONDITIONS TA TL4050A41Q MIN TYP TL4050B41Q MAX MIN TYP TL4050C41Q MAX MIN TYP MAX VZ Reverse breakdown voltage IZ = 100 µA 25°C Reverse breakdown IZ = 100 µA voltage tolerance 25°C –4.1 4.1 –8.2 8.2 –21 21 ΔVZ Full range –25 25 –29 29 –41 41 IZ,min Minimum cathode current IZ = 10 mA 25°C ±30 ±30 ±30 IZ = 1 mA 25°C ±20 ±20 ±20 αVZ Average temperature coefficient of reverse breakdown voltage 25°C ±20 ±20 ±20 Reverse breakdown voltage change with cathode current change IZ,min < IZ < 1 mA 25°C IZ = 100 µA 1 mA < IZ < 15 mA I = 1 mA, Reverse dynamic Z f = 120 Hz, impedance IAC = 0.1 IZ eN Wideband noise IZ = 100 µA, 10 Hz ≤ f ≤ 10 kHz Long-term stability of reverse breakdown voltage t = 1000 h, TA = 25°C ± 0.1°C, IZ = 100 µA Thermal hysteresis (1) ΔTA = –40°C to 125°C (1) 4.096 68 52 78 Full range 0.2 0.9 Full range 7 68 52 0.2 0.9 10 7 mV 68 µA ppm/°C ±50 0.2 1.2 2 V 78 ±50 1.2 2 4.096 78 ±50 Full range 25°C ZZ VHYST 52 Full range 25°C DVZ DI Z 4.096 UNIT 0.9 1.2 2 10 7 mV 10 25°C 0.5 0.5 0.5 Ω 25°C 93 93 93 µVRMS 120 120 120 ppm 1.148 1.148 1.148 mV Thermal hysteresis is defined as VZ,25°C (after cycling to –40°C) – VZ,25°C (after cycling to 125°C). Submit Documentation Feedback Copyright © 2007–2009, Texas Instruments Incorporated Product Folder Link(s): TL4050 9 TL4050 SLOS486A – JUNE 2007 – REVISED AUGUST 2009........................................................................................................................................................ www.ti.com TL4050x50I ELECTRICAL CHARACTERISTICS at industrial temperature range, full range TA = –40°C to 85°C (unless otherwise noted) PARAMETER TEST CONDITIONS TA TL4050A50I MIN TYP TL4050B50I MAX MIN TYP TL4050C50I MAX MIN TYP MAX VZ Reverse breakdown voltage IZ = 100 µA 25°C Reverse breakdown IZ = 100 µA voltage tolerance 25°C –5 5 –10 10 –25 25 ΔVZ Full range –22 22 –27 27 –42 42 IZ,min Minimum cathode current IZ = 10 mA 25°C ±30 ±30 ±30 IZ = 1 mA 25°C ±20 ±20 ±20 αVZ Average temperature coefficient of reverse breakdown voltage 25°C ±20 ±20 ±20 Reverse breakdown voltage change with cathode current change IZ,min < IZ < 1 mA 25°C IZ = 100 µA 1 mA < IZ < 15 mA I = 1 mA, Reverse dynamic Z f = 120 Hz, impedance IAC = 0.1 IZ eN Wideband noise IZ = 100 µA, 10 Hz ≤ f ≤ 10 kHz Long-term stability of reverse breakdown voltage Thermal hysteresis (1) (1) 10 5 74 56 80 Full range 0.2 1 Full range 8 74 56 0.2 1 12 8 mV 74 µA ppm/°C ±50 0.2 1.4 2 V 80 ±50 1.4 2 5 80 ±50 Full range 25°C ZZ VHYST 56 Full range 25°C DVZ DI Z 5 UNIT 1 1.4 2 12 8 mV 12 25°C 0.5 0.5 0.5 Ω 25°C 93 93 93 µVRMS t = 1000 h, TA = 25°C ± 0.1°C, IZ = 100 µA 120 120 120 ppm ΔTA = –40°C to 125°C 1.4 1.4 1.4 mV Thermal hysteresis is defined as VZ,25°C (after cycling to –40°C) – VZ,25°C (after cycling to 125°C). Submit Documentation Feedback Copyright © 2007–2009, Texas Instruments Incorporated Product Folder Link(s): TL4050 TL4050 www.ti.com........................................................................................................................................................ SLOS486A – JUNE 2007 – REVISED AUGUST 2009 TL4050x50Q ELECTRICAL CHARACTERISTICS at extended temperature range, full range TA = –40°C to 125°C (unless otherwise noted) PARAMETER TEST CONDITIONS TA TL4050A50Q MIN TYP TL4050B50Q MAX MIN TYP TL4050C50Q MAX MIN TYP MAX VZ Reverse breakdown voltage IZ = 100 µA 25°C Reverse breakdown IZ = 100 µA voltage tolerance 25°C –5 5 –10 10 –25 25 ΔVZ Full range –30 30 –35 35 –50 50 IZ,min Minimum cathode current IZ = 10 mA 25°C ±30 ±30 ±30 IZ = 1 mA 25°C ±20 ±20 ±20 αVZ Average temperature coefficient of reverse breakdown voltage 25°C ±20 ±20 ±20 Reverse breakdown voltage change with cathode current change IZ,min < IZ < 1 mA 25°C IZ = 100 µA 1 mA < IZ < 15 mA I = 1 mA, Reverse dynamic Z f = 120 Hz, impedance IAC = 0.1 IZ eN Wideband noise IZ = 100 µA, 10 Hz ≤ f ≤ 10 kHz Long-term stability of reverse breakdown voltage Thermal hysteresis (1) (1) 5 74 56 90 Full range 0.2 1 Full range 8 74 56 0.2 1 12 8 mV 74 µA ppm/°C ±50 0.2 1.4 2 V 90 ±50 1.4 2 5 90 ±50 Full range 25°C ZZ VHYST 56 Full range 25°C DVZ DI Z 5 UNIT 1 1.4 2 12 8 mV 12 25°C 0.5 0.5 0.5 Ω 25°C 93 93 93 µVRMS t = 1000 h, TA = 25°C ± 0.1°C, IZ = 100 µA 120 120 120 ppm ΔTA = –40°C to 125°C 1.4 1.4 1.4 mV Thermal hysteresis is defined as VZ,25°C (after cycling to –40°C) – VZ,25°C (after cycling to 125°C). Submit Documentation Feedback Copyright © 2007–2009, Texas Instruments Incorporated Product Folder Link(s): TL4050 11 TL4050 SLOS486A – JUNE 2007 – REVISED AUGUST 2009........................................................................................................................................................ www.ti.com TL4050x10I ELECTRICAL CHARACTERISTICS at industrial temperature range, full range TA = –40°C to 85°C (unless otherwise noted) PARAMETER TEST CONDITIONS TA TL4050A10I MIN TYP TL4050B10I MAX MIN TYP TL4050C10I MAX MIN TYP MAX VZ Reverse breakdown voltage IZ = 100 µA 25°C Reverse breakdown IZ = 100 µA voltage tolerance 25°C –10 10 –20 20 –50 50 ΔVZ Full range –43 43 –53 53 –83 83 IZ,min Minimum cathode current IZ = 10 mA 25°C ±40 ±40 ±40 IZ = 1 mA 25°C ±20 ±20 ±20 αVZ Average temperature coefficient of reverse breakdown voltage 25°C ±20 ±20 ±20 Reverse breakdown voltage change with cathode current change IZ,min < IZ < 1 mA 25°C IZ = 100 µA 1 mA < IZ < 15 mA I = 1 mA, Reverse dynamic Z f = 120 Hz, impedance IAC = 0.1 IZ eN Wideband noise IZ = 100 µA, 10 Hz ≤ f ≤ 10 kHz Long-term stability of reverse breakdown voltage Thermal hysteresis (1) (1) 12 10 100 80 103 Full range 0.8 1.5 Full range 12 100 80 0.8 1.5 23 12 mV 100 µA ppm/°C ±50 0.8 3.5 8 V 103 ±50 3.5 8 10 103 ±50 Full range 25°C ZZ VHYST 80 Full range 25°C DVZ DI Z 10 UNIT 1.5 3.5 8 23 12 mV 23 25°C 0.7 0.7 0.7 Ω 25°C 150 150 150 µVRMS t = 1000 h, TA = 25°C ± 0.1°C, IZ = 100 µA 120 120 120 ppm ΔTA = –40°C to 125°C 2.8 2.8 2.8 mV Thermal hysteresis is defined as VZ,25°C (after cycling to –40°C) – VZ,25°C (after cycling to 125°C). Submit Documentation Feedback Copyright © 2007–2009, Texas Instruments Incorporated Product Folder Link(s): TL4050 TL4050 www.ti.com........................................................................................................................................................ SLOS486A – JUNE 2007 – REVISED AUGUST 2009 TL4050x10Q ELECTRICAL CHARACTERISTICS at extended temperature range, full range TA = –40°C to 125°C (unless otherwise noted) PARAMETER TEST CONDITIONS TA TL4050A10Q MIN TYP TL4050B10Q MAX MIN TYP TL4050C10Q MAX MIN TYP MAX VZ Reverse breakdown voltage IZ = 100 µA 25°C Reverse breakdown IZ = 100 µA voltage tolerance 25°C –10 10 –20 20 –50 50 ΔVZ Full range –60 60 –70 70 –100 100 IZ,min Minimum cathode current IZ = 10 mA 25°C ±40 ±40 ±40 IZ = 1 mA 25°C ±20 ±20 ±20 αVZ Average temperature coefficient of reverse breakdown voltage 25°C ±20 ±20 ±20 Reverse breakdown voltage change with cathode current change IZ,min < IZ < 1 mA 25°C IZ = 100 µA 1 mA < IZ < 15 mA I = 1 mA, Reverse dynamic Z f = 120 Hz, impedance IAC = 0.1 IZ eN Wideband noise IZ = 100 µA, 10 Hz ≤ f ≤ 10 kHz Long-term stability of reverse breakdown voltage Thermal hysteresis (1) (1) 10 100 80 110 Full range 0.8 1.5 Full range 12 100 80 0.8 1.5 23 12 mV 100 µA ppm/°C ±50 0.8 3.5 8 V 110 ±50 3.5 8 10 110 ±50 Full range 25°C ZZ VHYST 80 Full range 25°C DVZ DI Z 10 UNIT 1.5 3.5 8 23 12 mV 23 25°C 0.7 0.7 0.7 Ω 25°C 150 150 150 µVRMS t = 1000 h, TA = 25°C ± 0.1°C, IZ = 100 µA 120 120 120 ppm ΔTA = –40°C to 125°C 2.8 2.8 2.8 mV Thermal hysteresis is defined as VZ,25°C (after cycling to –40°C) – VZ,25°C (after cycling to 125°C). Submit Documentation Feedback Copyright © 2007–2009, Texas Instruments Incorporated Product Folder Link(s): TL4050 13 TL4050 SLOS486A – JUNE 2007 – REVISED AUGUST 2009........................................................................................................................................................ www.ti.com TYPICAL CHARACTERISTICS OUTPUT IMPEDANCE vs FREQUENCY 1000 IZ = IZ(MIN) + 100 µA IZ = 1 mA Output Impedance – W Output Impedance – W 1000 OUTPUT IMPEDANCE vs FREQUENCY 100 VKA = 10 V 10 VKA = 2.5 V 1 100 10 VKA = 10 V 1 VKA = 2.5 V 0.1 100 1k 10k 100k 0.1 100 1M 1k REVERSE CHARACTERISTICS AND MINIMUM OPERATING CURRENT 1M NOISE VOLTAGE vs FREQUENCY 100 10 80 8 Noise Voltage – µV/ÖHz Reverse Current – A 100k Frequency – Hz Frequency – Hz VKA = 2.5 V 60 10k VKA = 10 V 40 20 6 4 VKA = 10 V 2 VKA = 2.5 V 0 0 0 1 2 3 4 5 6 7 8 9 10 1 100 1k 10k 100k Frequency – Hz Reverse Voltage (V) 14 10 Submit Documentation Feedback Copyright © 2007–2009, Texas Instruments Incorporated Product Folder Link(s): TL4050 TL4050 www.ti.com........................................................................................................................................................ SLOS486A – JUNE 2007 – REVISED AUGUST 2009 TYPICAL CHARACTERISTICS (continued) LARGE SIGNAL PULSE RESPONSE LARGE SIGNAL PULSE RESPONSE 20 6 VKA = 2.5 V VKA = 10 V 5 15 3 Voltage – V Voltage – V 4 2 10 5 1 0 0 -1 -20 0 20 40 60 Time – µs 80 -5 -100 0 100 200 300 400 Time – µs Submit Documentation Feedback Copyright © 2007–2009, Texas Instruments Incorporated Product Folder Link(s): TL4050 15 TL4050 SLOS486A – JUNE 2007 – REVISED AUGUST 2009........................................................................................................................................................ www.ti.com APPLICATION INFORMATION RS VIN 1-Hz Rate TL4050 VZ Figure 1. Start-Up Test Circuit Output Capacitor The TL4050 does not require an output capacitor across cathode and anode for stability. However, if an output bypass capacitor is desired, the TL4050 is designed to be stable with all capacitive loads. SOT-23 Pin Connections There is a parasitic Schottky diode connected between pins 2 and 3 of the SOT-23 packaged device. Thus, pin 3 of the SOT-23 package must be left floating or connected to pin 2. Use With ADCs or DACs The TL4050x-41 is designed to be a cost-effective voltage reference as required in 12-bit data-acquisition systems. For 12-bit systems operating from 5-V supplies, such as the ADS7842 (see Figure 2), the TL4050x-41 (4.096 V) permits operation with an LSB of 1 mV. ADS7842 0 V to VREF 1 AIN0 5V 2 AIN1 909 + 2.2 µF TL4050A-41 VANA VDIG 28 27 3 AIN2 A1 26 4 AIN3 A0 25 5 VREF CLK 24 + 0.1 µF + 5-V Analog Supply 10 µF 3.2-MHz Clock BUSY 23 BUSY Output 7 DB11 WR 22 Write Input 8 DB10 CS 21 9 DB9 RD 20 6 AGND 10 DB8 DB0 19 11 DB7 DB1 18 12 DB6 DB2 17 13 DB5 DB3 16 14 DGND DB4 15 Read Input Figure 2. Data-Acquisition Circuit With TL4050x-41 16 Submit Documentation Feedback Copyright © 2007–2009, Texas Instruments Incorporated Product Folder Link(s): TL4050 TL4050 www.ti.com........................................................................................................................................................ SLOS486A – JUNE 2007 – REVISED AUGUST 2009 Cathode and Load Currents In a typical shunt-regulator configuration (see Figure 3), an external resistor, RS, is connected between the supply and the cathode of the TL4050. RS must be set properly, as it sets the total current available to supply the load (IL) and bias the TL4050 (IZ). In all cases, IZ must stay within a specified range for proper operation of the reference. Taking into consideration one extreme in the variation of the load and supply voltage (maximum IL and minimum VS), RS must be small enough to supply the minimum IZ required for operation of the regulator, as given by data-sheet parameters. At the other extreme, maximum VS and minimum IL, RS must be large enough to limit IZ to less than its maximum-rated value of 15 mA. RS is calculated according to Equation 1: ǒVS * VZǓ RS + (I L ) I Z) (1) VS RS IZ + IL IL VZ IZ TL4050 Figure 3. Shunt Regulator Submit Documentation Feedback Copyright © 2007–2009, Texas Instruments Incorporated Product Folder Link(s): TL4050 17 PACKAGE OPTION ADDENDUM www.ti.com 13-Jul-2022 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan (2) Lead finish/ Ball material MSL Peak Temp Op Temp (°C) Device Marking (3) Samples (4/5) (6) TL4050A10IDBZR ACTIVE SOT-23 DBZ 3 3000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 TK2U Samples TL4050A10IDBZT ACTIVE SOT-23 DBZ 3 250 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 TK2U Samples TL4050A10IDCKR ACTIVE SC70 DCK 5 3000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 8ZU Samples TL4050A10IDCKT ACTIVE SC70 DCK 5 250 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 8ZU Samples TL4050A10QDBZR ACTIVE SOT-23 DBZ 3 3000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 125 TK5U Samples TL4050A10QDCKR ACTIVE SC70 DCK 5 3000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 125 94U Samples TL4050A25IDBZR ACTIVE SOT-23 DBZ 3 3000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 TKEU Samples TL4050A25IDBZT ACTIVE SOT-23 DBZ 3 250 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 TKEU Samples TL4050A25IDCKR ACTIVE SC70 DCK 5 3000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 82U Samples TL4050A25IDCKT ACTIVE SC70 DCK 5 250 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 82U Samples TL4050A25QDBZR ACTIVE SOT-23 DBZ 3 3000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 125 TKHU Samples TL4050A25QDBZT ACTIVE SOT-23 DBZ 3 250 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 125 TKHU Samples TL4050A25QDCKR ACTIVE SC70 DCK 5 3000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 125 85U Samples TL4050A41IDBZR ACTIVE SOT-23 DBZ 3 3000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 (TKL3, TKLU) Samples TL4050A41IDBZT ACTIVE SOT-23 DBZ 3 250 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 (TKL3, TKLU) Samples TL4050A41QDBZR ACTIVE SOT-23 DBZ 3 3000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 125 (TKP3, TKPU) Samples TL4050A41QDBZT ACTIVE SOT-23 DBZ 3 250 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 125 (TKP3, TKPU) Samples TL4050A41QDCKR ACTIVE SC70 DCK 5 3000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 125 8HU Samples TL4050A50IDBZR ACTIVE SOT-23 DBZ 3 3000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 (TKS3, TKSU) Samples TL4050A50IDBZT ACTIVE SOT-23 DBZ 3 250 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 (TKS3, TKSU) Samples Addendum-Page 1 PACKAGE OPTION ADDENDUM www.ti.com Orderable Device 13-Jul-2022 Status (1) Package Type Package Pins Package Drawing Qty Eco Plan (2) Lead finish/ Ball material MSL Peak Temp Op Temp (°C) Device Marking (3) Samples (4/5) (6) TL4050A50IDCKR ACTIVE SC70 DCK 5 3000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 8LU Samples TL4050A50IDCKT ACTIVE SC70 DCK 5 250 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 8LU Samples TL4050A50QDBZR ACTIVE SOT-23 DBZ 3 3000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 125 (TKV3, TKVU) Samples TL4050A50QDBZT ACTIVE SOT-23 DBZ 3 250 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 125 (TKV3, TKVU) Samples TL4050A50QDCKR ACTIVE SC70 DCK 5 3000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 125 8PU Samples TL4050B10IDBZR ACTIVE SOT-23 DBZ 3 3000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 TK3U Samples TL4050B10IDBZT ACTIVE SOT-23 DBZ 3 250 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 TK3U Samples TL4050B10QDBZR ACTIVE SOT-23 DBZ 3 3000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 125 TK6U Samples TL4050B10QDBZT ACTIVE SOT-23 DBZ 3 250 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 125 TK6U Samples TL4050B10QDCKR ACTIVE SC70 DCK 5 3000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 125 95U Samples TL4050B25IDBZR ACTIVE SOT-23 DBZ 3 3000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 TKFU Samples TL4050B25IDBZT ACTIVE SOT-23 DBZ 3 250 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 TKFU Samples TL4050B25IDCKR ACTIVE SC70 DCK 5 3000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 83U Samples TL4050B25QDBZR ACTIVE SOT-23 DBZ 3 3000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 125 TKJU Samples TL4050B25QDCKR ACTIVE SC70 DCK 5 3000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 125 86U Samples TL4050B41IDBZR ACTIVE SOT-23 DBZ 3 3000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 TKMU Samples TL4050B41IDBZT ACTIVE SOT-23 DBZ 3 250 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 TKMU Samples TL4050B41IDCKR ACTIVE SC70 DCK 5 3000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 8FU Samples TL4050B41IDCKT ACTIVE SC70 DCK 5 250 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 8FU Samples TL4050B41QDBZR ACTIVE SOT-23 DBZ 3 3000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 125 (TKQ3, TKQU) Samples TL4050B41QDBZT ACTIVE SOT-23 DBZ 3 250 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 125 (TKQ3, TKQU) Samples Addendum-Page 2 PACKAGE OPTION ADDENDUM www.ti.com Orderable Device 13-Jul-2022 Status (1) Package Type Package Pins Package Drawing Qty Eco Plan (2) Lead finish/ Ball material MSL Peak Temp Op Temp (°C) Device Marking (3) Samples (4/5) (6) TL4050B50IDBZR ACTIVE SOT-23 DBZ 3 3000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 (TKT3, TKTU) Samples TL4050B50IDBZT ACTIVE SOT-23 DBZ 3 250 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 (TKT3, TKTU) Samples TL4050B50IDCKR ACTIVE SC70 DCK 5 3000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 8MU Samples TL4050B50QDBZR ACTIVE SOT-23 DBZ 3 3000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 125 (TKW3, TKWU) Samples TL4050B50QDCKR ACTIVE SC70 DCK 5 3000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 125 8RU Samples TL4050C10IDBZR ACTIVE SOT-23 DBZ 3 3000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 (TK43, TK4U) Samples TL4050C10IDBZT ACTIVE SOT-23 DBZ 3 250 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 (TK43, TK4U) Samples TL4050C10QDBZR ACTIVE SOT-23 DBZ 3 3000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 125 (TK73, TK7U) Samples TL4050C25IDBZR ACTIVE SOT-23 DBZ 3 3000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 TKGU Samples TL4050C25IDBZT ACTIVE SOT-23 DBZ 3 250 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 TKGU Samples TL4050C25IDCKR ACTIVE SC70 DCK 5 3000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 84U Samples TL4050C25IDCKT ACTIVE SC70 DCK 5 250 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 84U Samples TL4050C25QDBZR ACTIVE SOT-23 DBZ 3 3000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 125 TKKU Samples TL4050C25QDCKR ACTIVE SC70 DCK 5 3000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 125 87U Samples TL4050C41IDBZR ACTIVE SOT-23 DBZ 3 3000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 TKNU Samples TL4050C41IDBZT ACTIVE SOT-23 DBZ 3 250 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 TKNU Samples TL4050C41IDCKR ACTIVE SC70 DCK 5 3000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 8GU Samples TL4050C41QDBZR ACTIVE SOT-23 DBZ 3 3000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 125 TKRU Samples TL4050C41QDCKR ACTIVE SC70 DCK 5 3000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 125 8KU Samples TL4050C41QDCKT ACTIVE SC70 DCK 5 250 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 125 8KU Samples TL4050C50IDBZR ACTIVE SOT-23 DBZ 3 3000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 (TKU3, TKUU) Samples Addendum-Page 3 PACKAGE OPTION ADDENDUM www.ti.com Orderable Device 13-Jul-2022 Status (1) Package Type Package Pins Package Drawing Qty Eco Plan (2) Lead finish/ Ball material MSL Peak Temp Op Temp (°C) Device Marking (3) Samples (4/5) (6) TL4050C50IDBZT ACTIVE SOT-23 DBZ 3 250 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 (TKU3, TKUU) Samples TL4050C50IDCKR ACTIVE SC70 DCK 5 3000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 8NU Samples TL4050C50IDCKT ACTIVE SC70 DCK 5 250 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 8NU Samples TL4050C50QDBZR ACTIVE SOT-23 DBZ 3 3000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 125 (TKY3, TKYU) Samples TL4050C50QDCKR ACTIVE SC70 DCK 5 3000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 125 8SU Samples (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of