TL751L10QD

TL750L TL751L www.ti.com.................................................................................................................................... SLVS017U – SEPTEMBER 1987 – REVISED SEPTEMBER 2009 LOW-DROPOUT VOLTAGE REGULATORS FEATURES 1 • • • Very Low Dropout Voltage, Less Than 0.6 V at 150 mA Very Low Quiescent Current TTL- and CMOS-Compatible Enable on TL751L Series 60-V Load-Dump Protection 8 2 7 3 6 4 5 INPUT COMMON COMMON NC COMMON 1 Reverse Transient Protection Down to –50 V Internal Thermal-Overload Protection Overvoltage Protection Internal Overcurrent-Limiting Circuitry Less Than 500-μA Disable (TL751L Series) TL750L . . . KC PACKAGE (TOP VIEW) TL750L . . . D PACKAGE (TOP VIEW) OUTPUT COMMON COMMON NC • • • • • OUTPUT COMMON INPUT COMMON • TL750L . . . KCS PACKAGE (TOP VIEW) OUTPUT COMMON INPUT NC – No internal connection COMMON INPUT TL750L . . . LP PACKAGE (TO-92, TO-226AA) (TOP VIEW) INPUT COMMON OUTPUT COMMON INPUT TL751L . . . D PACKAGE (TOP VIEW) OUTPUT COMMON COMMON NC OUTPUT 1 8 2 7 3 6 4 5 INPUT COMMON COMMON ENABLE NC – No internal connection TL750L . . . KVU PACKAGE (TOP VIEW) OUTPUT COMMON OUTPUT TL750L . . . KTT PACKAGE (TOP VIEW) COMMON COMMON TL750L . . . KTE PACKAGE (TOP VIEW) COMMON INPUT TL751L . . .P PACKAGE (TOP VIEW) OUTPUT NC NC NC 1 8 2 7 3 6 4 5 INPUT NC COMMON ENABLE NC – No internal connection DESCRIPTION/ORDERING INFORMATION The TL750L and TL751L series of fixed-output voltage regulators offer 5-V, 8-V, 10-V, and 12-V options. The TL751L series also has an enable (ENABLE) input. When ENABLE is high, the regulator output is placed in the high-impedance state. This gives the designer complete control over power up, power down, or emergency shutdown. The TL750L and TL751L series are low-dropout positive-voltage regulators specifically designed for battery-powered systems. These devices incorporate overvoltage and current-limiting protection circuitry, along with internal reverse-battery protection circuitry to protect the devices and the regulated system. The series is fully protected against 60-V load-dump and reverse-battery conditions. Extremely low quiescent current during full-load conditions makes these devices ideal for standby power systems. 1 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright © 1987–2009, Texas Instruments Incorporated TL750L TL751L SLVS017U – SEPTEMBER 1987 – REVISED SEPTEMBER 2009.................................................................................................................................... www.ti.com ORDERING INFORMATION (1) TJ VO TYP AT 25°C PACKAGE PowerFLEX™ – KTE 0°C to 125°C 8V 10 V TL750L05CKTER TL750L05CD Reel of 2500 TL750L05CDR Tube of 75 TL751L05CD Reel of 2500 TL751L05CDR Bulk of 1000 TL750L05CLP Reel of 2000 TL750L05CLPR TO-220 – KC Tube of 50 TL750L05CKC TL750L05C TO-220 – KCS Tube of 50 TL750L05CKCS TL750L05C TO-252 – KVU Reel of 2500 TL750L05CKVUR 750L05C TO-263 – KTT Reel of 500 TL750L05CKTTR 750L05C Tube of 75 TL750L08CD Reel of 2500 TL750L08CDR TO-226/TO-92 – LP Bulk of 1000 TL750L08CLP 750L08C PDIP – P Tube of 50 TL751L10CP TL751L10C Tube of 75 TL750L10CD Reel of 2500 TL750L10CDR Tube of 75 TL751L10CD Reel of 2500 TL751L10CDR Bulk of 1000 TL750L10CLP Reel of 2000 TL750L10CLPR Tube of 75 TL750L12CD Reel of 2500 TL750L12CDR Tube of 75 TL751L12CD Reel of 2500 TL751L12CDR Bulk of 1000 TL750L12CLP TO-226/TO-92 – LP SOIC – D SOIC – D SOIC – D TO-226/TO-92 – LP (1) (2) TOP-SIDE MARKING Tube of 75 TO-226/TO-92 – LP 12 V ORDERABLE PART NUMBER Reel of 2000 SOIC – D 5V (2) TL750L05C 50L05C 51L05C 750L05C 50L08C 50L10C 51L10C 750L10C 50L12C 51L12C 750L12C For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI web site at www.ti.com. Package drawings, thermal data, and symbolization are available at www.ti.com/packaging. DEVICE COMPONENT COUNT 2 Submit Documentation Feedback Transistors 20 JFETs 2 Diodes 5 Resistors 16 Copyright © 1987–2009, Texas Instruments Incorporated TL750L TL751L www.ti.com.................................................................................................................................... SLVS017U – SEPTEMBER 1987 – REVISED SEPTEMBER 2009 Absolute Maximum Ratings (1) over operating junction temperature range (unless otherwise noted) MIN Continuous input voltage Transient input voltage (2) TA = 25°C Continuous reverse input voltage t ≤ 100 ms Transient reverse input voltage TJ Operating virtual junction temperature Lead temperature Tstg (1) (2) 1,6 mm (1/16 in) for 10 s Storage temperature range –65 MAX UNIT 26 V 60 V –15 V –50 V 150 °C 260 °C 150 °C Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. The transient input voltage rating applies to the waveform shown in Figure 1. Package Thermal Data (1) (1) PACKAGE BOARD θJC θJA PDIP (P) High K, JESD 51-7 57°C/W 85°C/W PowerFLEX™ (KTE) High K, JESD 51-5 3°C/W 23°C/W SOIC (D) High K, JESD 51-7 39°C/W 97°C/W TO-226/TO-92 (LP) High K, JESD 51-7 55°C/W 140°C/W TO-220 (KC) High K, JESD 51-5 3°C/W 19°C/W TO-220 (KCS) High K, JESD 51-5 3°C/W 19°C/W TO-252 (KVU) High K, JESD 51-5 – 30.3°C/W TO-263 (KTT) High K, JESD 51-5 18°C/W 25.3°C/W Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable ambient temperature is PD = (TJ(max) – TA)/θJA. Operating at the absolute maximum TJ of 150°C can affect reliability. Recommended Operating Conditions over recommended operating junction temperature range (unless otherwise noted) MIN MAX 6 26 TL75xL08 9 26 TL75xL10 11 26 TL75xL12 13 26 TL75xLxx 2 15 TJ = 25°C TL75xLxx –0.3 0.8 TJ = 0°C to 125°C TL75xLxx –0.15 0.8 TL75xL05 VI Input voltage VIH High-level ENABLE input voltage VIL (1) Low-level ENABLE input voltage UNIT V V V IO Output current TL75xLxx 0 150 mA TJ Operating virtual junction temperature TL75xLxxC 0 125 °C (1) The algebraic convention, in which the least positive (most negative) value is designated minimum, is used in this data sheet for ENABLE voltage levels and temperature only. Copyright © 1987–2009, Texas Instruments Incorporated Submit Documentation Feedback 3 TL750L TL751L SLVS017U – SEPTEMBER 1987 – REVISED SEPTEMBER 2009.................................................................................................................................... www.ti.com TL75xL05 Electrical Characteristics (1) VI = 14 V, IO = 10 mA, TJ = 25°C (unless otherwise noted) PARAMETER Output voltage Input regulation voltage VI = 6 V to 26 V, IO = 0 to 150 mA TJ = 0°C to 125°C TYP 4.8 5 4.75 VI = 6 V to 26 V 6 30 IO = 5 mA to 150 mA 60 65 20 0.2 IO = 150 mA 0.6 f = 10 Hz to 100 kHz VI = 6 V to 26 V, IO = 10 mA, TJ = 0°C to 125°C 1 ENABLE ≥ 2 V mV mV V μV 500 10 V dB 50 IO = 10 mA IO = 150 mA (1) 5.2 5.25 10 VI = 8 V to 18 V, f = 120 Hz Quiescent current UNIT MAX 5 Output regulation voltage Output noise voltage TJ = 25°C MIN VI = 9 V to 16 V Ripple rejection Dropout voltage TL750L05 TL751L05 TEST CONDITIONS 12 2 mA 0.5 Pulse-testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into account separately. All characteristics are measured with a 0.1-μF capacitor across the input and a 10-μF capacitor, with equivalent series resistance of less than 0.4 Ω, across the output. TL75xL08 Electrical Characteristics (1) VI = 14 V, IO = 10 mA, TJ = 25°C (unless otherwise noted) PARAMETER Output voltage Input regulation voltage VI = 9 V to 26 V, IO = 0 to 150 mA TJ = 0°C to 125°C 8 8.32 7.6 8.4 25 50 60 65 40 0.2 IO = 150 mA 0.6 f = 10 Hz to 100 kHz VI = 9 V to 26 V, IO = 10 mA, TJ = 0°C to 125°C ENABLE ≥ 2 V 1 mV mV V μV 500 10 V dB 80 IO = 10 mA IO = 150 mA 4 7.68 VI = 9 V to 26 V IO = 5 mA to 150 mA (1) MAX 20 VI = 11 V to 21 V, f = 120 Hz Quiescent current TYP 10 Output regulation voltage Output noise voltage TJ = 25°C UNIT MIN VI = 10 V to 17 V Ripple rejection Dropout voltage TL750L08 TL751L08 TEST CONDITIONS 12 2 mA 0.5 Pulse-testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into account separately. All characteristics are measured with a 0.1-μF capacitor across the input and a 10-μF capacitor, with equivalent series resistance of less than 0.4 Ω, across the output. Submit Documentation Feedback Copyright © 1987–2009, Texas Instruments Incorporated TL750L TL751L www.ti.com.................................................................................................................................... SLVS017U – SEPTEMBER 1987 – REVISED SEPTEMBER 2009 TL75xL10 Electrical Characteristics (1) VI = 14 V, IO = 10 mA, TJ = 25°C (unless otherwise noted) PARAMETER Output voltage Input regulation voltage VI = 11 V to 26 V, IO = 0 to 150 mA TYP MAX TJ = 25°C 9.6 10 10.4 TJ = 0°C to 125°C 9.5 25 VI = 11 V to 26 V 30 60 VI = 12 V to 22 V, f = 120 Hz IO = 5 mA to 150 mA 60 65 50 0.2 IO = 150 mA 0.6 f = 10 Hz to 100 kHz VI = 11 V to 26 V, IO = 10 mA, TJ = 0°C to 125°C 1 ENABLE ≥ 2 V (1) mV mV V μV 700 10 V dB 100 IO = 10 mA IO = 150 mA Quiescent current 10.5 10 Output regulation voltage Output noise voltage UNIT MIN VI = 12 V to 19 V Ripple rejection Dropout voltage TL750L10 TL751L10 TEST CONDITIONS 12 2 mA 0.5 Pulse-testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into account separately. All characteristics are measured with a 0.1-μF capacitor across the input and a 10-μF capacitor, with equivalent series resistance of less than 0.4 Ω, across the output. TL75xL12 Electrical Characteristics (1) VI = 14 V, IO = 10 mA, TJ = 25°C (unless otherwise noted) PARAMETER Output voltage Input regulation voltage VI = 13 V to 26 V, IO = 0 to 150 mA TJ = 0°C to 125°C TYP MAX 11.52 12 12.48 11.4 30 VI = 13 V to 26 V 20 40 VI = 13 V to 23 V, f = 120 Hz IO = 5 mA to 150 mA 50 0.2 IO = 150 mA 0.6 f = 10 Hz to 100 kHz VI = 13 V to 26 V, IO = 10 mA, TJ = 0°C to 125°C 1 mV mV V μV 700 10 V dB 120 IO = 10 mA ENABLE ≥ 2 V (1) 55 50 IO = 150 mA Quiescent current 12.6 15 Output regulation voltage Output noise voltage TJ = 25°C UNIT MIN VI = 14 V to 19 V Ripple rejection Dropout voltage TL750L12 TL751L12 TEST CONDITIONS 12 2 mA 0.5 Pulse-testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into account separately. All characteristics are measured with a 0.1-μF capacitor across the input and a 10-μF capacitor, with equivalent series resistance of less than 0.4 Ω, across the output. PARAMETER MEASUREMENT INFORMATION The TL750L, TL751L series are low-dropout regulators. This means that capacitance loading is important to the performance of the regulator because it is a vital part of the control loop. The capacitor value and its equivalent series resistance (ESR) both affect the control loop and must be defined for the load range and temperature range. Figure 1 shows the recommended range of ESR for a given load with a 10-μF capacitor on the output. Copyright © 1987–2009, Texas Instruments Incorporated Submit Documentation Feedback 5 TL750L TL751L SLVS017U – SEPTEMBER 1987 – REVISED SEPTEMBER 2009.................................................................................................................................... www.ti.com TYPICAL CHARACTERISTICS TL750L05 EQUIVALENT SERIES RESISTANCE vs LOAD CURRENT TRANSIENT INPUT VOLTAGE vs TIME 60 0.9 0.8 Potential Instability Region 0.7 0.6 0.5 0.4 0.3 Region of Best Stability 0.2 0.1 0.024 0 TA = 25°C VI = 14 V + 46e(−t/0.230) for t ≥ 5 ms CL = 10-µF Tantalum Capacitor TA = − 40°C to 125°C V i − Transient Input Voltage − V ESR − Equivalent Series Resistance − Ω 1.0 50 ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ 40 30 tr = 1 ms 20 10 0 Potential Instability Region 10 80 120 0 0 150 100 200 300 400 500 600 t − Time − ms IL − Load Current − mA Figure 1. Figure 2. TL750L05 INPUT CURRENT vs INPUT VOLTAGE TL750L12 INPUT CURRENT vs INPUT VOLTAGE 60 40 35 50 II − Input Current − mA II − Input Current − mA 30 25 20 15 40 30 20 10 10 5 0 0 0 1 2 3 4 VI − Input Voltage − V Figure 3. 6 Submit Documentation Feedback 5 6 0 2 4 6 8 10 12 14 VI − Input Voltage − V Figure 4. Copyright © 1987–2009, Texas Instruments Incorporated PACKAGE OPTION ADDENDUM www.ti.com 6-Oct-2023 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan (2) Lead finish/ Ball material MSL Peak Temp Op Temp (°C) Device Marking (3) Samples (4/5) (6) TL750L05CD ACTIVE SOIC D 8 75 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 125 50L05C Samples TL750L05CDR ACTIVE SOIC D 8 2500 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 125 50L05C Samples TL750L05CKCS ACTIVE TO-220 KCS 3 50 RoHS & Green SN N / A for Pkg Type 0 to 125 TL750L05C Samples TL750L05CKCSE3 ACTIVE TO-220 KCS 3 50 RoHS & Green SN N / A for Pkg Type 0 to 125 TL750L05C Samples TL750L05CKTTR ACTIVE DDPAK/ TO-263 KTT 3 500 RoHS & Green SN Level-3-245C-168 HR 0 to 125 TL750L05C Samples TL750L05CKTTRG3 ACTIVE DDPAK/ TO-263 KTT 3 500 RoHS & Green SN Level-3-245C-168 HR 0 to 125 TL750L05C Samples TL750L05CKVURG3 ACTIVE TO-252 KVU 3 2500 RoHS & Green SN Level-3-260C-168 HR 0 to 125 750L05C Samples TL750L05CLP ACTIVE TO-92 LP 3 1000 RoHS & Green SN N / A for Pkg Type 0 to 125 750L05C Samples TL750L05CLPE3 ACTIVE TO-92 LP 3 1000 RoHS & Green SN N / A for Pkg Type 0 to 125 750L05C Samples TL750L05CLPR ACTIVE TO-92 LP 3 2000 RoHS & Green SN N / A for Pkg Type 0 to 125 750L05C Samples TL750L05CLPRE3 ACTIVE TO-92 LP 3 2000 RoHS & Green SN N / A for Pkg Type 0 to 125 750L05C Samples TL750L08CD ACTIVE SOIC D 8 75 RoHS & Green NIPDAU Level-2-260C-1 YEAR 0 to 125 50L08C Samples TL750L08CDR ACTIVE SOIC D 8 2500 RoHS & Green NIPDAU Level-2-260C-1 YEAR 0 to 125 50L08C Samples TL750L08CLP ACTIVE TO-92 LP 3 1000 RoHS & Green SN N / A for Pkg Type 0 to 125 750L08C Samples TL750L08CLPE3 ACTIVE TO-92 LP 3 1000 RoHS & Green SN N / A for Pkg Type 0 to 125 750L08C Samples TL750L10CD ACTIVE SOIC D 8 75 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 125 50L10C Samples TL750L10CDR ACTIVE SOIC D 8 2500 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 125 50L10C Samples TL750L10CLP ACTIVE TO-92 LP 3 1000 RoHS & Green SN N / A for Pkg Type 0 to 125 750L10C Samples TL750L10CLPR ACTIVE TO-92 LP 3 2000 RoHS & Green SN N / A for Pkg Type 0 to 125 750L10C Samples Addendum-Page 1 PACKAGE OPTION ADDENDUM www.ti.com 6-Oct-2023 Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan (2) Lead finish/ Ball material MSL Peak Temp Op Temp (°C) Device Marking (3) Samples (4/5) (6) TL750L12CD ACTIVE SOIC D 8 75 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 125 50L12C Samples TL750L12CDR ACTIVE SOIC D 8 2500 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 125 50L12C Samples TL750L12CLP ACTIVE TO-92 LP 3 1000 RoHS & Green SN N / A for Pkg Type 0 to 125 750L12C Samples TL751L05CD ACTIVE SOIC D 8 75 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 125 51L05C Samples TL751L05CDE4 ACTIVE SOIC D 8 75 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 125 51L05C Samples TL751L05CDG4 ACTIVE SOIC D 8 75 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 125 51L05C Samples TL751L05CDR ACTIVE SOIC D 8 2500 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 125 51L05C Samples TL751L10CD ACTIVE SOIC D 8 75 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 125 51L10C Samples TL751L10CDR ACTIVE SOIC D 8 2500 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 125 51L10C Samples TL751L10CP ACTIVE PDIP P 8 50 RoHS & Green NIPDAU N / A for Pkg Type 0 to 125 TL751L10C Samples TL751L12CD ACTIVE SOIC D 8 75 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 125 51L12C Samples TL751L12CDR ACTIVE SOIC D 8 2500 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 125 51L12C Samples TL751L12CDRG4 ACTIVE SOIC D 8 2500 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 125 51L12C Samples (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of