TLE2161, TLE2161A, TLE2161B
EXCALIBUR JFET-INPUT HIGH-OUTPUT-DRIVE
µPOWER OPERATIONAL AMPLIFIERS
SLOS049D – NOVEMBER 1989 – REVISED MAY 1996
D
D
D
D
Excellent Output Drive Capability
VO = ± 2.5 V Min at RL = 100 Ω,
VCC± = ± 5 V
VO = ± 12.5 V Min at RL = 600 Ω,
VCC± = ± 15 V
Low Supply Current . . . 280 µA Typ
Decompensated for High Slew Rate and
Gain-Bandwidth Product
AVD = 0.5 Min
Slew Rate = 10 V/µs Typ
Gain-Bandwidth Product = 6.5 MHz Typ
Wide Operating Supply Voltage Range
VCC ± = ± 3.5 V to ± 18 V
High Open-Loop Gain . . . 280 V/mV Typ
Low Offset Voltage . . . 500 µV Max
Low Offset Voltage Drift With Time
0.04 µV/Month Typ
Low Input Bias Current . . . 5 pA Typ
D
D
D
D
MAXIMUM PEAK-TO-PEAK OUTPUT VOLTAGE
vs
LOAD RESISTANCE
VO(PP) – Maximum Peak-to-Peak Output Voltage – V
description
The TLE2161, TLE2161A, and TLE2161B are
JFET-input, low-power, precision operational
amplifiers manufactured using the Texas
Instruments Excalibur process. Decompensated
for stability with a minimum closed-loop gain of 5,
these devices combine outstanding output drive
capability with low power consumption, excellent
dc precision, and high gain-bandwidth product.
In addition to maintaining the traditional JFET
advantages of fast slew rates and low input bias
and offset currents, the Excalibur process offers
outstanding parametric stability over time and
temperature. This results in a device that remains
precise even with changes in temperature and
over years of use.
10
VCC ± = ± 5 V
TA = 25°C
8
6
4
2
0
10
100
1k
RL – Load Resistance – Ω
10 k
AVAILABLE OPTIONS
PACKAGE
TA
VIOmax
AT 25°C
25 C
0°C
to
70°C
SMALL
OUTLINE
(D)
CHIP
CARRIER
(FK)
CERAMIC
DIP
(JG)
PLASTIC
DIP
(P)
500 µV
1 5 mV
1.5
3 mV
—
TLE2161ACD
TLE2161CD
—
—
—
—
TLE2161BCP
TLE2161ACP
TLE2161CP
– 40°C
to
85°C
500 µV
1 5 mV
1.5
3 mV
—
TLE2161AID
TLE2161ID
—
—
—
—
TLE2161BIP
TLE2161AIP
TLE2161IP
– 55°C
to
125°C
500 µV
1.5
1 5 mV
3 mV
—
TLE2161AMD
TLE2161MD
—
TLE2161AMFK
TLE2161MFK
TLE2161BMJG
TLE2161AMJG
TLE2161MJG
TLE2161BMP
TLE2161AMP
TLE2161MP
The D packages are available taped and reeled. Add R suffix to device type (e.g., TLE2161ACDR).
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Copyright 1996, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
1
TLE2161, TLE2161A, TLE2161B
EXCALIBUR JFET-INPUT HIGH-OUTPUT-DRIVE
µPOWER OPERATIONAL AMPLIFIERS
SLOS049D – NOVEMBER 1989 – REVISED MAY 1996
description (continued)
A variety of available options includes small-outline packages and chip-carrier versions for high-density system
applications.
The C-suffix devices are characterized for operation from 0°C to 70°C. The I-suffix devices are characterized
for operation from – 40°C to 85°C. The M-suffix devices are characterized for operation over the full military
temperature range of – 55°C to 125°C.
FK PACKAGE
(TOP VIEW)
1
8
2
7
3
6
4
5
NC
VCC +
OUT
OFFSET N2
NC
IN –
NC
IN +
NC
4
3 2 1 20 19
18
5
17
6
16
7
15
8
14
9 10 11 12 13
NC
VCC +
NC
OUT
NC
NC
VCC –
NC
N2
NC
OFFSET N1
IN –
IN +
VCC –
NC
N1
NC
NC
NC
D, JG, OR P PACKAGE
(TOP VIEW)
NC – No internal connection
equivalent schematic
VCC +
Q9
Q13
Q32
Q14
Q18
Q29
Q33
Q4
Q36
Q16
Q19
IN +
Q25
Q37
Q27
IN –
Q3
Q5
Q1
Q7
Q43
R8
Q17
Q35
R6
Q11
2.7 kΩ
Q10
Q6
C1
Q30
C3
1.6 pF
R3
2.4 kΩ
20
Q38
Q42
Q41
Q39
Q15
C2 15 pF
Q8
Q21
OFFSET N1
OFFSET N2
Q12
R1
1.1 kΩ
R4
55 kΩ
R2
1.1 kΩ
R5
60 kΩ
Q26
Q22
VCC –
All component values are nominal.
POST OFFICE BOX 655303
OUT
R9
100
Q24
Q31
Q2
Ω
Q28
Q20
15 pF
2
Q40
Q34
Q23
• DALLAS, TEXAS 75265
R7
600 Ω
Ω
TLE2161, TLE2161A, TLE2161B
EXCALIBUR JFET-INPUT HIGH-OUTPUT-DRIVE
µPOWER OPERATIONAL AMPLIFIERS
SLOS049D – NOVEMBER 1989 – REVISED MAY 1996
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)†
Supply voltage, VCC + (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 V
Supply voltage, VCC – . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 19 V
Differential input voltage, VID (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 38 V
Input voltage range, VI (any input) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VCC ±
Input current, II (each input) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 1 mA
Output current, IO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 80 mA
Total current into VCC + . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 mA
Total current out of VCC – . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 mA
Duration of short-circuit current at (or below) 25°C (see Note 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . unlimited
Continuous total power dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Dissipation Rating Table
Operating free-air temperature range, TA: C suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C
I suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 40°C to 85°C
M suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 55°C to 125°C
Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 65°C to 150°C
Case temperature for 60 seconds: FK package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds: D or P package . . . . . . . . . . . . . . . . . 260°C
Lead temperature 1,6 mm (1/16 inch) from case for 60seconds: JG package . . . . . . . . . . . . . . . . . . . . 300°C
† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. All voltage values, except differential voltages, are with respect to the midpoint between VCC +, and VCC –.
2. Differential voltages are at IN+ with respect to IN –.
3. The output may be shorted to either supply. Temperature and /or supply voltages must be limited to ensure that the maximum
dissipation rating is not exceeded.
DISSIPATION RATING TABLE
PACKAGE
TA ≤ 25°C
POWER RATING
DERATING FACTOR
ABOVE TA = 25°C
TA = 70°C
POWER RATING
TA = 85°C
POWER RATING
TA = 125°C
POWER RATING
D
725 mW
5.8 mW/°C
464 mW
377 mW
145 mW
FK
1375 mW
11.0 mW/°C
880 mW
715 mW
275 mW
JG
1050 mW
8.4 mW/°C
672 mW
546 mW
210 mW
P
1000 mW
8.0 mW/°C
640 mW
520 mW
200 mW
recommended operating conditions
C SUFFIX
Supply voltage, VCC ±
Common mode input voltage,
Common-mode
voltage VIC
Operating free-air temperature, TA
VCC ± = ± 5 V
VCC ± = ± 15 V
I SUFFIX
M SUFFIX
MIN
MAX
MIN
MAX
MIN
MAX
± 3.5
± 18
± 3.5
± 18
+ 3.5
± 18
– 1.6
4
– 1.6
4
– 1.6
4
– 11
13
– 11
13
– 11
13
0
70
– 40
85
– 55
125
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
UNIT
V
V
°C
3
TLE2161, TLE2161A, TLE2161B
EXCALIBUR JFET-INPUT HIGH-OUTPUT-DRIVE
µPOWER OPERATIONAL AMPLIFIERS
SLOS049D – NOVEMBER 1989 – REVISED MAY 1996
electrical characteristics at specified free-air temperature, VCC ± = ± 5 V (unless otherwise noted)
PARAMETER
TEST CONDITIONS
TA†
TLE2161C, TLE2161AC
TLE2161BC
MIN
25°C
TLE2161C
VIO
Input offset voltage
IIB
VICR
RS = 50 Ω
VIC = 0
0,
Input offset current
0.5
Full range
Input bias current
6
µV/°C
0.04
µV/mo
25°C
1
0.8
Full range
– 1.6
to 4
RL = 100 Ω
Large signal differential voltage amplification
Large-signal
25°C
3.5
Full range
3.3
25°C
2.5
VO = ± 2
2.8
8V
V,
RL = 10 kΩ
VO = 0 to 2 V
V,
RL = 100 Ω
VO = 0 to – 2 V
V, RL = 100 Ω
nA
pA
2
– 1.6
to 4
Full range
pA
3
25°C
Common mode input voltage range
Common-mode
Maximum negative peak output voltage swing
1.9
25°C
Full range
Full range
Maximum positive peak output voltage swing
mV
2.4
25°C
RL = 10 kΩ
AVD
2.6
Full range
RL = 100 Ω
VOM –
0.6
3.5
25°C
RL = 10 kΩ
VOM +
3.1
Full range
Input offset voltage long-term drift (see Note 4)
IIO
0.8
UNIT
4
25°C
TLE2161AC
Temperature coefficient of input offset voltage
MAX
Full range
TLE2161BC
αVIO
TYP
–2
to 6
nA
V
V
3.7
V
3.1
2
25°C
– 3.7
Full range
– 3.3
25°C
– 2.5
Full range
–2
25°C
15
Full range
2
25°C
0.75
Full range
0.5
25°C
0.5
Full range
0.25
– 3.9
V
– 2.7
80
45
V/mV
3
ri
Input resistance
25°C
1012
Ω
ci
Input capacitance
25°C
4
pF
zo
Open-loop output impedance
IO = 0
25°C
280
Ω
CMRR
Common mode rejection ratio
Common-mode
VIC=V
=VICRmin
min, RS = 50 Ω
kSVR
Supply voltage rejection ratio (∆VCC± /∆VIO)
Supply-voltage
VCC± = ± 5 V to ± 15 V,
RS = 50 Ω
ICC
Supply current
∆ICC
Supply-current
y
change
g over operating
g
temperature range
25°C
65
Full range
65
25°C
75
Full range
75
25°C
VO = 0
0,
No load
82
93
280
Full range
Full range
dB
dB
325
350
29
µA
µA
† Full range is 0°C to 70°C.
NOTE 4: Typical values are based on the input offset voltage shift observed through 168 hours of operating life test at TA = 150°C extrapolated
to TA = 25°C using the Arrhenius equation and assuming an activation energy of 0.96 eV.
4
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
TLE2161, TLE2161A, TLE2161B
EXCALIBUR JFET-INPUT HIGH-OUTPUT-DRIVE
µPOWER OPERATIONAL AMPLIFIERS
SLOS049D – NOVEMBER 1989 – REVISED MAY 1996
operating characteristics at specified free-air temperature, VCC ± = ±5 V (unless otherwise noted)
PARAMETER
TEST CONDITIONS
SR
Slew rate (see Figure 1)
Vn
Equivalent
q
input noise voltage
g
(see Figure 2)
Vn(PP)
Peak-to-peak equivalent input
noise voltage
f = 0.1 Hz to 10 Hz
In
Equivalent input noise current
f = 1 kHz
Total harmonic distortion
VO(PP) = 2 V,
RL = 10 kΩ
THD
Gain-bandwidth product
(see Figure 3)
AVD = 5,
RL = 10 kΩ,
RS = 20 Ω,
f = 10 Hz
RS = 20 Ω,
f = 1 kHz
f = 100 kHz,
f = 100 kHz,
AVD = 5,
RL = 10 kΩ,
RL = 100 kΩ,
CL = 100 pF
f = 10 kHz,
CL = 100 pF
CL = 100 pF
Settling time
BOM
Maximum output-swing
bandwidth
AVD = 5,
φm
Phase margin (see Figure 3)
AVD = 5,
AVD = 5,
TYP
25°C
7
10
Full
range
5
RL = 10 kΩ
RL = 10 kΩ,
RL = 100 Ω,
CL = 100 pF
100
43
60
25°C
1
25°C
25°C
CL = 100 pF
59
1.1
25°C
25°C
UNIT
MAX
V/µs
25°C
25°C
ε = 0.01%
TLE2161C, TLE2161AC
TLE2161BC
MIN
25°C
ε = 0.1%
ts
TA†
nV/√H
nV/√Hz
µV
fA/√Hz
0.025%
5.8
4.3
5
10
420
MHz
µs
kHz
70°
84°
† Full range is 0°C to 70°C.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5
TLE2161, TLE2161A, TLE2161B
EXCALIBUR JFET-INPUT HIGH-OUTPUT-DRIVE
µPOWER OPERATIONAL AMPLIFIERS
SLOS049D – NOVEMBER 1989 – REVISED MAY 1996
electrical characteristics at specified free-air temperature, VCC ± = ± 15 V (unless otherwise noted)
PARAMETER
TEST CONDITIONS
TA†
TLE2161C, TLE2161AC
TLE2161BC
MIN
25°C
TLE2161C
VIO
Input offset voltage
25°C
RS = 50 Ω
IIB
VICR
Input offset current
VOM –
0.04
µV/mo
25°C
2
4
Full range
– 11
to 13
25°C
13.2
25°C
Full range
Maximum negative peak output voltage swing
25°C
Large signal differential voltage amplification
Large-signal
Full range
VO = ± 10 V
V,
RL = 10 kΩ
VO = 0 to 8 V
V,
RL = 600 Ω
VO = 0 to – 8 V
V,
RL = 600 Ω
– 12
to 16
nA
V
V
13.7
13
12.5
nA
pA
3
25°C
Full range
pA
1
– 11
to 13
25°C
RL = 600 Ω
AVD
25°C
Full range
RL = 10 kΩ
0.5
µV/°C
Common mode input voltage range
Common-mode
RL = 600 Ω
mV
1
Full range
Maximum positive peak output voltage swing
1.5
6
Full range
25°C
RL = 10 kΩ
VOM +
0.3
Full range
Input bias current
3
2.5
Full range
Input offset voltage long-term drift
(see Note 4)
IIO
0.5
Full range
VIC = 0,
UNIT
MAX
3.9
25°C
TLE2161AC
Temperature coefficient of input offset voltage
0.6
Full range
TLE2161BC
αVIO
TYP
V
13.2
12
– 13.2
– 13.7
– 13
– 12.5
V
– 13
– 12
25°C
30
Full range
20
25°C
25
Full range
10
25°C
3
Full range
1
230
100
V/mV
25
ri
Input resistance
25°C
1012
Ω
ci
Input capacitance
25°C
4
pF
zo
Open-loop output impedance
IO = 0
25°C
280
Ω
CMRR
Common mode rejection ratio
Common-mode
VIC = VICRmin
min,
kSVR
Supply voltage rejection ratio (∆VCC± /∆VIO)
Supply-voltage
VCC± = ± 5 V to ± 15 V,,
RS = 50 Ω
ICC
Supply current
25°C
72
Full range
70
25°C
75
Full range
75
25°C
0
VO = 0,
∆ICC
RS = 50 Ω
No load
Supply-current
y
change
g over operating
g
temperature range
90
93
290
Full range
Full range
dB
dB
350
375
34
µA
µA
† Full range is 0°C to 70°C.
NOTE 4: Typical values are based on the input offset voltage shift observed through 168 hours of operating life test at TA = 150°C extrapolated
to TA = 25°C using the Arrhenius equation and assuming an activation energy of 0.96 eV.
6
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
TLE2161, TLE2161A, TLE2161B
EXCALIBUR JFET-INPUT HIGH-OUTPUT-DRIVE
µPOWER OPERATIONAL AMPLIFIERS
SLOS049D – NOVEMBER 1989 – REVISED MAY 1996
operating characteristics at specified free-air temperature, VCC ± = ±15 V (unless otherwise noted)
PARAMETER
TEST CONDITIONS
SR
Slew rate (see Figure 1)
AVD = 5
5,
RL = 10 kΩ
kΩ,
Vn
Equivalent
input noise voltage
q
g
(see Figure 2)
RS = 20 Ω,
RS = 20 Ω,
f = 10 Hz
Vn(PP)
Peak-to-peak equivalent input
noise voltage
f = 0.1 Hz to 10 Hz
In
Equivalent input noise current
f = 1 kHz
Total harmonic distortion
VO(PP) = 2 V,
RL = 10 kΩ
AVD = 5,
f = 10 kHz,
f = 100 kHz,
RL = 10 kΩ,
CL = 100 pF
THD
Gain-bandwidth product
(see Figure 3)
f = 100 kHz,
CL = 100 pF
RL = 600 Ω,
CL = 100 pF
Settling time
BOM
Maximum output-swing
bandwidth
AVD = 5,
φm
Phase margin (see Figure 3)
AVD = 5,
AVD = 5,
TYP
25°C
7
10
Full range
5
RL = 10 kΩ
RL = 10 kΩ,
RL = 600 Ω,
CL = 100 pF
V/µs
70
100
40
60
nV/√Hz
1.1
µV
25°C
1.1
fA/√Hz
25°C
25°C
25°C
CL = 100 pF
UNIT
MAX
25°C
25°C
ε = 0.01%
TLE2161C, TLE2161AC
TLE2161BC
MIN
25°C
f = 1 kHz
ε = 0.1%
ts
TA†
25°C
0.025%
6.4
5.6
5
10
116
MHz
µs
kHz
72°
78°
† Full range is 0°C to 70°C.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
7
TLE2161, TLE2161A, TLE2161B
EXCALIBUR JFET-INPUT HIGH-OUTPUT-DRIVE
µPOWER OPERATIONAL AMPLIFIERS
SLOS049D – NOVEMBER 1989 – REVISED MAY 1996
electrical characteristics at specified free-air temperature, VCC ± = ± 5 V (unless otherwise noted)
PARAMETER
TEST CONDITIONS
TA†
TLE2161I, TLE2161AI
TLE2161BI
MIN
25°C
TLE2161I
VIO
Input offset voltage
IIB
VICR
VIC = 0,
RS = 50 Ω
Input offset current
25°C
0.04
µV/mo
25°C
1
Large signal differential voltage amplification
Large-signal
VO = ± 2
2.8
8V
V,
RL = 10 kΩ
VO = 0 to 2 V
V,
RL = 100 Ω
VO = 0 to – 2 V
V, RL = 100 Ω
ri
Input resistance
ci
Input capacitance
zo
Open-loop output impedance
3
25°C
Full range
– 1.6
to
4
25°C
3.5
Full range
3.1
25°C
2.5
CMRR
Common mode rejection ratio
Common-mode
VIC=V
=VICRmin
min, RS = 50 Ω
kSVR
Supply voltage rejection ratio (∆VCC± /∆VIO)
Supply-voltage
VCC± = ± 5 V to ± 15 V,
RS = 50 Ω
ICC
Supply current
Supply-current change over operating
temperature range
No load
–2
to
6
nA
V
3.7
V
3.1
2
25°C
– 3.7
Full range
– 3.1
25°C
– 2.5
Full range
–2
25°C
15
Full range
2
25°C
0.75
Full range
0.5
25°C
0.5
Full range
0.25
– 3.9
V
– 2.7
80
45
V/mV
3
1012
Ω
25°C
4
pF
25°C
280
Ω
25°C
65
Full range
65
25°C
75
Full range
65
25°C
VO = 0
0,
nA
pA
4
25°C
IO = 0
pA
2
– 1.6
to
4
Full range
RL = 100 Ω
∆ICC
µV/°C
Common mode input voltage range
Common-mode
Maximum negative peak output voltage swing
1.9
2.7
Full range
Maximum positive peak output voltage
mV
6
Full range
25°C
RL = 10 kΩ
AVD
0.5
Full range
Input bias current
2.6
3.9
25°C
RL = 100 Ω
VOM –
0.6
Full range
RL = 10 kΩ
VOM +
3.1
Full range
Input offset voltage long-term drift
(see Note 4)
IIO
0.8
UNIT
4.4
25°C
TLE2161AI
Temperature coefficient of input offset voltage
MAX
Full range
TLE2161BI
αVIO
TYP
82
93
280
Full range
Full range
dB
dB
325
350
29
µA
µA
† Full range is – 40°C to 85°C.
NOTE 4: Typical values are based on the input offset voltage shift observed through 168 hours of operating life test at TA = 150°C extrapolated
to TA= 25°C using the Arrhenius equation and assuming an activation energy of 0.96 eV.
8
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
TLE2161, TLE2161A, TLE2161B
EXCALIBUR JFET-INPUT HIGH-OUTPUT-DRIVE
µPOWER OPERATIONAL AMPLIFIERS
SLOS049D – NOVEMBER 1989 – REVISED MAY 1996
operating characteristics at specified free-air temperature, VCC ± = ± 5 V (unless otherwise noted)
PARAMETER
TEST CONDITIONS
TLE2161I, TLE2161AI
TLE2161BI
MIN
TYP
25°C
7
10
Full range
5
SR
Slew rate (see Figure 1)
AVD = 5
5,
RL = 10 kΩ
kΩ,
Vn
Equivalent
input noise
q
voltage (see Figure 2)
RS = 20 Ω,
RS = 20 Ω,
f = 10 Hz
Vn(PP)
Peak-to-peak equivalent
input noise voltage
f = 0.1 Hz to 10 Hz
25°C
1.1
In
Equivalent input noise
current
f = 1 kHz
25°C
1
THD
Total harmonic distortion
VO(PP) = 2 V,
RL = 10 kΩ
25°C
0.025%
Gain-bandwidth product
(see Figure 3)
f = 100 kHz,
f = 100 kHz,
CL = 100 pF
TA†
25°C
f = 1 kHz
AVD = 5,
f = 10 kHz,
RL = 10 kΩ,
CL = 100 pF
RL = 100 Ω,
CL = 100 pF
ε = 0.1%
ts
Settling time
BOM
Maximum output-swing
bandwidth
AVD = 5,
φm
Phase margin (see Figure 3)
AVD = 5,
AVD = 5,
25°C
25°C
ε = 0.01%
RL = 10 kΩ
RL = 10 kΩ,
RL = 100 Ω,
25°C
CL = 100 pF
CL = 100 pF
25°C
V/µs
59
100
43
60
5.8
4.3
5
10
420
UNIT
MAX
nV/√Hz
µV
fA/√Hz
MHz
µs
kHz
70°
84°
† Full range is – 40°C to 85°C.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
9
TLE2161, TLE2161A, TLE2161B
EXCALIBUR JFET-INPUT HIGH-OUTPUT-DRIVE
µPOWER OPERATIONAL AMPLIFIERS
SLOS049D – NOVEMBER 1989 – REVISED MAY 1996
electrical characteristics at specified free-air temperature, VCC ± = ± 15 V (unless otherwise noted)
PARAMETER
TEST CONDITIONS
TA†
TLE2161I, TLE2161AI
TLE2161BI
MIN
25°C
TLE2161I
VIO
Input offset voltage
RS = 50 Ω
IIB
VICR
Input offset current
VOM –
µV/mo
25°C
2
4
Full range
– 11
to
13
25°C
13.2
25°C
Full range
Maximum negative peak output voltage swing
25°C
Large signal differential voltage amplification
Large-signal
Full range
V
V0 = ± 10 V,
RL = 10 kΩ
V0 = 0 to 8 V
V,
RL = 600 Ω
V RL = 600 Ω
V0 = 0 to – 8 V,
– 12
to
16
nA
V
V
13.7
13
12.5
nA
pA
5
25°C
Full range
pA
3
– 11
to
13
25°C
RL = 600 Ω
AVD
µV/°C
0.04
Full range
RL = 10 kΩ
0.5
25°C
Common mode input voltage range
Common-mode
RL = 600 Ω
mV
1.3
Full range
Maximum positive peak output voltage swing
1.5
6
Full range
25°C
RL = 10 kΩ
VOM +
0.3
Full range
Full range
Input bias current
3
2.9
25°C
Input offset voltage long-term drift (see Note 4)
IIO
0.5
Full range
VIC = 0
0,
UNIT
MAX
4.3
25°C
TLE2161AI
Temperature coefficient of input offset voltage
0.6
Full range
TLE2161BI
αVIO
TYP
V
13.2
12
– 13.2
– 13.7
– 13
– 12.5
V
– 13
– 12
25°C
30
Full range
20
25°C
25
Full range
10
25°C
3
Full range
1
230
100
V/mV
25
ri
Input resistance
25°C
1012
Ω
ci
Input capacitance
25°C
4
pF
zo
Open-loop output impedance
IO = 0
25°C
280
Ω
CMRR
Common mode rejection ratio
Common-mode
VIC=V
=VICRmin
min, RS = 50 Ω
kSVR
Supply voltage rejection ratio (∆VCC± /∆VIO)
Supply-voltage
VCC± = ± 5 V to ± 15 V,
RS = 50 Ω
ICC
Supply current
∆ICC
25°C
72
Full range
65
25°C
75
Full range
65
25°C
Supply-current change over operating
temperature range
VO = 0
0,
No load
90
93
290
Full range
Full range
dB
dB
350
375
34
µA
µA
† Full range is – 40°C to 85°C.
NOTE 4: Typical values are based on the input offset voltage shift observed through 168 hours of operating life test at TA= 150°C extrapolated
to TA = 25°C using the Arrhenius equation and assuming an activation energy of 0.96 eV.
10
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
TLE2161, TLE2161A, TLE2161B
EXCALIBUR JFET-INPUT HIGH-OUTPUT-DRIVE
µPOWER OPERATIONAL AMPLIFIERS
SLOS049D – NOVEMBER 1989 – REVISED MAY 1996
operating characteristics at specified free-air temperature, VCC ± = ± 15 V (unless otherwise noted)
PARAMETER
TEST CONDITIONS
TLE2161I, TLE2161AI
TLE2161IB
MIN
TYP
25°C
7
10
Full range
5
UNIT
MAX
SR
Slew rate (see Figure 1)
AVD = 5
5,
RL = 10 kΩ
kΩ,
Vn
Equivalent
input noise voltage
q
g
(see Figure 2)
RS = 20 Ω,
RS = 20 Ω,
f = 10 Hz
Vn(PP)
(PP)
Peak-to-peak equivalent
q
input
noise voltage
f = 0.1
0 1 Hz to 10 Hz
25°C
11
1.1
µV
In
Equivalent input noise current
f = 1 kHz
25°C
1.1
fA/√Hz
THD
Total harmonic distortion
VO(PP) = 2 V,,
RL = 10 kΩ
Gain-bandwidth product
(see Figure 3)
f = 100 kHz,
f = 100 kHz,
CL = 100 pF
TA†
25°C
f = 1 kHz
AVD = 5,,
f = 10 kHz,,
RL = 10 kΩ,
RL = 600 Ω,
CL = 100 pF
CL = 100 pF
ε = 0.1%
ts
Settling time
BOM
Maximum output-swing
g
bandwidth
AVD = 5,
5
φm
Phase margin (see Figure 3)
AVD = 5,
AVD = 5,
25°C
25°C
25°C
ε = 0.01%
RL = 10 kΩ
RL = 10 kΩ,
RL = 600 Ω,
25°C
CL = 100 pF
CL = 100 pF
25°C
V/µs
70
100
40
60
nV/√Hz
0 025%
0.025%
6.4
5.6
5
10
116
MHz
µs
kHz
72°
78°
† Full range is – 40°C to 85°C.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
11
TLE2161, TLE2161A, TLE2161B
EXCALIBUR JFET-INPUT HIGH-OUTPUT-DRIVE
µPOWER OPERATIONAL AMPLIFIERS
SLOS049D – NOVEMBER 1989 – REVISED MAY 1996
electrical characteristics at specified free-air temperature, VCC ± = ± 5 V (unless otherwise noted)
PARAMETER
TEST CONDITIONS
TA†
TLE2161M
TLE2161AM
TLE2161BM
MIN
25°C
TLE2161M
VIO
Input offset voltage
αVIO
Input offset current
IIB
Input bias current
VICR
VOM +
VOM –
AVD
Maximum negative
peak
g
output voltage swing
Large-signal
g
g
differential
voltage amplification
3.1
0.6
2.6
4.6
25°C
0.5
Full range
RS = 50 Ω
VIC = 0,
µV/°C
25°C
0.04
µV/mo
25°C
1
25°C
3
25°C
Full range
– 1.6
to 4
FK and JG
packages
RL = 600 Ω
Full range
25°C
Full range
25°C
D and P
packages
RL = 100 Ω
All packages
RL = 10 kΩ
FK and JG
packages
RL = 600 Ω
D and P
packages
RL = 100 Ω
All packages
V0 = ± 2.8
28V
V,
RL = 10 kΩ
V0 = 0 to 2.5
2 5 V,
V
RL = 600 Ω
FK and JG
packages
D and P
packages
Full range
25°C
Full range
25°C
Full range
25°C
V0 = 0 to – 2
2.5
5 V,
V
RL = 600 Ω
V0 = 0 to 2 V
V,
RL = 100 Ω
V0 = 0 to – 2 V,
V
RL = 100 Ω
3.5
2.5
V
V
3.6
3.1
V
2
– 3.7
– 3.9
–3
– 2.5
– 3.5
–2
– 2.5
–2
25°C
15
Full range
2
25°C
1
25°C
3.7
2
2.5
nA
V
3
Full range
Full range
–2
to 6
nA
pA
30
– 1.6
to 4
25°C
pA
15
Full range
RL = 10 kΩ
1.9
6
Full range
All packages
mV
3.1
Full range
Common mode input voltage range
Common-mode
Maximum positive peak
output voltage swing
0.8
Full range
Input offset voltage long-term drift
(see Note 4)
IIO
MAX
6
25°C
TLE2161BM
Temperature coefficient of input offset
voltage
TYP
Full range
TLE2161AM
UNIT
V
– 2.7
80
65
0.5
1
Full range
0.5
25°C
0.75
Full range
0.5
25°C
0.5
Full range
0.25
16
V/mV
45
3
† Full range is – 55°C to 125°C.
NOTE 4: Typical values are based on the input offset voltage shift observed through 168 hours of operating life test at TA = 150°C extrapolated
to TA = 25°C using the Arrhenius equation and assuming an activation energy of 0.96 eV.
12
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
TLE2161, TLE2161A, TLE2161B
EXCALIBUR JFET-INPUT HIGH-OUTPUT-DRIVE
µPOWER OPERATIONAL AMPLIFIERS
SLOS049D – NOVEMBER 1989 – REVISED MAY 1996
electrical characteristics at specified free-air temperature, VCC ± = ± 5 V (unless otherwise noted
continued)
PARAMETER
TLE2161M
TLE2161AM
TLE2161BM
TA†
TEST CONDITIONS
MIN
UNIT
ri
Input resistance
25°C
TYP
1012
ci
Input capacitance
25°C
4
pF
zo
Open-loop output impedance
IO = 0
25°C
280
Ω
CMRR
Common mode rejection ratio
Common-mode
VIC = VICRmin
min,
kSVR
Supply voltage rejection ratio (∆VCC±/∆VIO)
Supply-voltage
VCC± = ± 5 V to ± 15 V,,
RS = 50 Ω
ICC
Supply current
∆ICC
RS = 50 Ω
25°C
65
Full range
60
25°C
75
Full range
65
25°C
VO = 0
0,
Supply-current change over operating
temperature range
Ω
82
dB
93
280
Full range
No load
MAX
dB
325
350
Full range
µA
µA
39
† Full range is – 55°C to 125°C.
operating characteristics, VCC ± = ± 5 V, TA = 25°C
PARAMETER
TLE2161M
TLE2161AM
TLE2161BM
TEST CONDITIONS
MIN
SR
Slew rate (see Figure 1)
AVD = 5,
RS = 20 Ω,
RL = 10 kΩ,
f = 10 Hz
59
RS = 20 Ω,
f = 1 kHz
43
Vn
Equivalent input noise voltage (see Figure 2)
Vn(PP)
In
Peak-to-peak equivalent input noise voltage
f = 0.1 Hz to 10 Hz
Equivalent input noise current
f = 1 kHz
THD
Total harmonic distortion
AVD = 5,
RL = 10 kΩ
Gain bandwidth product (see Figure 3)
Gain-bandwidth
ts
Settling time
BOM
Maximum output-swing bandwidth
φm
Phase margin (see Figure 3)
f = 100 kHz,
f = 100 kHz,
CL = 100 pF
TYP
10
1.1
1
VO(PP) = 2 V,
RL = 10 kΩ,
RL = 600 kΩ,
f = 10 kHz,
CL = 100 pF
5.8
CL = 100 pF
4.3
5
ε = 0.01%
10
AVD = 5,
POST OFFICE BOX 655303
RL = 10 kΩ
RL = 10 kΩ,
RL = 600 Ω,
420
CL = 100 pF
70°
CL = 100 pF
84°
• DALLAS, TEXAS 75265
MAX
V/µs
nV/√H
nV/√Hz
µV
fA/√Hz
0.025%
ε = 0.1%
AVD = 5,
AVD = 5,
UNIT
MHz
µs
kHz
13
TLE2161, TLE2161A, TLE2161B
EXCALIBUR JFET-INPUT HIGH-OUTPUT-DRIVE
µPOWER OPERATIONAL AMPLIFIERS
SLOS049D – NOVEMBER 1989 – REVISED MAY 1996
electrical characteristics at specified free-air temperature, VCC ± = ±15 V (unless otherwise noted)
PARAMETER
TEST CONDITIONS
TA†
TLE2161M
TLE2161AM
TLE2161BM
MIN
25°C
TLE2161M
VIO
Input offset voltage
IIB
VICR
Temperature coefficient of input offset voltage
RS = 50 Ω
VIC = 0,
Input offset current
1.5
0.3
µV/°C
25°C
0.04
µV/mo
25°C
2
4
25°C
Full range
– 11
to 13
13.2
12.5
25°C
12.5
Full range
Maximum negative peak output voltage swing
RL = 600 Ω
Large signal differential voltage amplification
Large-signal
25°C
Full range
VO = ± 10 V
V,
RL = 10 kΩ
VO = 0 to 8 V
V,
RL = 600 Ω
VO = 0 to – 8 V
V,
RL = 600 Ω
– 12
to 16
nA
V
V
13.7
V
13.2
12
25°C
– 13.2
Full range
– 12.5
25°C
– 12.5
Full range
nA
pA
40
– 11
to 13
Common mode input voltage range
Common-mode
pA
20
Full range
Maximum positive peak output voltage swing
0.5
1.7
25°C
Input bias current
mV
6
Full range
Full range
RL = 10 kΩ
AVD
0.5
3.6
25°C
RL = 600 Ω
VOM –
3
Full range
RL = 10 kΩ
VOM +
0.6
Full range
Input offset voltage long-term drift
(see Note 4)
IIO
MAX
6
25°C
TLE2161BM
αVIO
TYP
Full range
TLE2161AM
UNIT
– 13.7
V
– 13
– 12
25°C
30
Full range
20
25°C
25
Full range
7
25°C
3
Full range
1
230
100
V/mV
25
ri
Input resistance
25°C
1012
Ω
ci
Input capacitance
25°C
4
pF
zo
Open-loop output impedance
IO = 0
25°C
280
Ω
CMRR
Common mode rejection ratio
Common-mode
VIC = VICRmin
min,
kSVR
Supply voltage rejection ratio (∆VCC± /∆VIO)
Supply-voltage
VCC± = ± 5 V to ± 15 V,
RS = 50 Ω
ICC
Supply current
∆ICC
RS = 50 Ω
25°C
72
Full range
65
25°C
75
Full range
65
25°C
Supply-current change over operating
temperature range
VO = 0
0,
No load
90
93
290
Full range
Full range
dB
dB
350
375
46
µA
µA
† Full range is – 55°C to 125°C.
NOTE 4: Typical values are based on the input offset voltage shift observed through 168 hours of operating life test at TA = 150°C extrapolated
to TA = 25°C using the Arrhenius equation and assuming an activation energy of 0.96 eV.
14
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
TLE2161, TLE2161A, TLE2161B
EXCALIBUR JFET-INPUT HIGH-OUTPUT-DRIVE
µPOWER OPERATIONAL AMPLIFIERS
SLOS049D – NOVEMBER 1989 – REVISED MAY 1996
operating characteristics at specified free-air temperature, VCC ± = ±15 V (unless otherwise noted)
PARAMETER
TEST CONDITIONS
RL = 10 kΩ
kΩ,
RS = 20 Ω,
f = 10 Hz
RS = 20 Ω,
f = 1 kHz
TYP
25°C
7
10
Full range
5
MAX
Slew rate (see Figure 1)
Vn
Equivalent
q
input noise voltage
g
(see Figure 2)
VN(PP)
Peak-to-peak equivalent input
noise voltage
f = 0.1 Hz to 10 Hz
25°C
1.1
µV
In
Equivalent input noise current
f = 1 Hz
25°C
1.1
fA/√Hz
THD
Total harmonic distortion
VO(PP) = 2 V,
RL = 10 kΩ
f = 100 kHz,
f = 100 kHz,
CL = 100 pF
MIN
UNIT
SR
Gain-bandwidth product
(see Figure 3)
AVD = 5
5,
TA†
TLE2161M
TLE2161AM
TLE2161BM
25°C
AVD = 5,
f = 10 kHz,
RL = 10 kΩ,
CL = 100 pF
RL = 600 Ω,
CL = 100 pF
ε = 0.1%
ts
Settling time
BOM
Maximum output-swing
bandwidth
AVD = 5,
φm
Phase margin (see Figure 3)
AVD = 5,
AVD = 5,
25°C
25°C
25°C
ε = 0.01%
RL = 10 kΩ
RL = 10 kΩ,
RL = 600 Ω,
25°C
CL = 100 pF
CL = 100 pF
25°C
V/µs
70
40
nV/√Hz
0.025%
6.4
5.6
5
10
116
MHz
µs
kHz
72°
78°
† Full range is – 55°C to 125°C.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
15
TLE2161, TLE2161A, TLE2161B
EXCALIBUR JFET-INPUT HIGH-OUTPUT-DRIVE
µPOWER OPERATIONAL AMPLIFIERS
SLOS049D – NOVEMBER 1989 – REVISED MAY 1996
PARAMETER MEASUREMENT INFORMATION
8 kΩ
2 kΩ
VCC +
VCC +
–
–
VO
VI
2 kΩ
VO
+
+
VCC –
VCC –
CL
(see Note A)
RS
RS
NOTE A: CL includes fixture capacitance.
Figure 2. Noise-Voltage Test Circuit
Figure 1. Slew-Rate Test Circuit
10 kΩ
VCC +
100 Ω
VI
–
VO
+
VCC –
CL
(see Note A)
RL
NOTE A: CL includes fixture capacitance.
Figure 3. Gain-Bandwidth Product and Phase-Margin Test Circuit
typical values
Typical values presented in this data sheet represent the median (50% point) of device parametric performance.
Input bias and offset current
At the picoampere bias-current level typical of the TLE2161, TLE2161A, and TLE2161B, accurate
measurement of the bias current becomes difficult. Not only does this measurement require a picoammeter,
but test socket leakages can easily exceed the actual device bias currents. To accurately measure these small
currents, Texas Instruments uses a two-step process. The socket leakage is measured using picoammeters
with bias voltages applied but with no device in the socket. The device is then inserted into the socket, and a
second test that measures both the socket leakage and the device input bias current is performed. The two
measurements are then subtracted algebraically to determine the bias current of the device.
16
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
TLE2161, TLE2161A, TLE2161B
EXCALIBUR JFET-INPUT HIGH-OUTPUT-DRIVE
µPOWER OPERATIONAL AMPLIFIERS
SLOS049D – NOVEMBER 1989 – REVISED MAY 1996
TYPICAL CHARACTERISTICS
Table of Graphs
FIGURE
VIO
Input offset voltage
Distribution
4
IIB
Input bias current
vs Common-mode input voltage
vs Free-air temperature
5
6
IIO
VICR
Input offset current
vs Free-air temperature
6
Common-mode input voltage range limits
vs Free-air temperature
7
VOM
VOM
Maximum positive peak output voltage
vs Output current
8
Maximum negative peak output voltage
vs Output current
9
VOM
VO(PP)
Maximum peak output voltage
vs Supply voltage
10, 11, 12
Maximum peak-to-peak output voltage
vs Frequency
13, 14, 15
AVD
Large-signal differential voltage amplification
vs Frequency
vs Free-air temperature
16
17
IOS
Short-circuit output current
vs Elapsed time
18
Large-signal voltage amplification
vs Free-air temperature
19
zo
Output impedance
vs Frequency
20
CMRR
Common-mode rejection ratio
vs Frequency
21
Supply current
vs Supply voltage
vs Free-air temperature
22
23
Pulse response
Small signal
Large signal
24, 25
26, 27
Noise voltage (referred to input)
0.1 to 10 Hz
28
Equivalent input noise voltage
vs Frequency
29
Total harmonic distortion
vs Frequency
30, 31
Gain-bandwidth product
vs Supply voltage
vs Free-air temperature
32
33
Phase margin
vs Supply voltage
vs Free-air temperature
34
35
Phase shift
vs Frequency
16
ICC
Vn
THD
φm
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
17
TLE2161, TLE2161A, TLE2161B
EXCALIBUR JFET-INPUT HIGH-OUTPUT-DRIVE
µPOWER OPERATIONAL AMPLIFIERS
SLOS049D – NOVEMBER 1989 – REVISED MAY 1996
TYPICAL CHARACTERISTICS†
TLE2161
DISTRIBUTION OF
INPUT OFFSET VOLTAGE
INPUT BIAS CURRENT
vs
COMMON-MODE INPUT VOLTAGE
60
736 Amplifiers Tested From 3 Wafer Lots
VCC ± = ± 15 V
TA = 25°C
P Package
50
I IB – Input Bias Current – pA
Percentage of Amplifiers – %
15
10
5
VCC ± = ± 15 V
VID = 0
TA = 25°C
40
30
20
10
0
–4
–3
–2 –1
0
1
2
VIO – Input Offset Voltage – mV
3
0
4
– 20
Figure 4
COMMON-MODE
INPUT VOLTAGE RANGE LIMITS
vs
FREE-AIR TEMPERATURE
VIC – Common-Mode Input Voltage – V
I IB and I IO – Input Bias and Offset Currents – pA
VCC + +2
VCC ± = ± 15 V
VIC = 0
104
103
ÏÏ
IIB
102
ÏÏ
IIO
101
1
25
45
65
85
105
TA – Free-Air Temperature – °C
125
VCC + +1
Positive Limit
VCC +
VCC – +4
Negative Limit
VCC – +3
VCC – +2
– 75 – 50 – 25 0
25
50
75
TA – Free-Air Temperature – °C
100
Figure 7
Figure 6
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
18
20
Figure 5
INPUT BIAS CURRENT
AND INPUT OFFSET CURRENT
vs
FREE-AIR TEMPERATURE
105
– 15 –10 – 5
0
5
10
15
VIC – Common-Mode Input Voltage – V
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
125
TLE2161, TLE2161A, TLE2161B
EXCALIBUR JFET-INPUT HIGH-OUTPUT-DRIVE
µPOWER OPERATIONAL AMPLIFIERS
SLOS049D – NOVEMBER 1989 – REVISED MAY 1996
TYPICAL CHARACTERISTICS
MAXIMUM NEGATIVE PEAK
OUTPUT VOLTAGE
vs
OUTPUT CURRENT
16
TA = 25°C
14
VCC ± = ± 15 V
12
10
8
6
4
VCC ± = ± 5 V
2
0
0
– 10
– 20
– 30
– 40
IO – Output Current – mA
– 50
VOM – – Maximum Negative Peak Output Voltage – V
VOM+ – Maximum Positive Peak Output Voltage – V
MAXIMUM POSITIVE PEAK
OUTPUT VOLTAGE
vs
OUTPUT CURRENT
– 60
ÏÏÏÏ
ÏÏÏÏ
– 16
TA = 25°C
– 14
VCC ± = ± 15 V
– 12
– 10
–8
–6
–4
VCC ± = ± 5 V
–2
0
0
30
10
15
20
25
IO – Output Current – mA
5
Figure 8
MAXIMUM PEAK OUTPUT VOLTAGE
vs
SUPPLY VOLTAGE
20
RL = 10 kΩ
TA = 25°C
15
VOM +
10
5
0
–5
– 10
VOM –
– 15
VOM – Maximum Peak Output Voltage – V
20
VOM – Maximum Peak Output Voltage – V
40
Figure 9
MAXIMUM PEAK OUTPUT VOLTAGE
vs
SUPPLY VOLTAGE
– 20
35
VOM +
10
5
0
–5
– 10
VOM –
– 15
– 20
0
2
4
6
8
10
12
14
16
18 20
RL = 600 Ω
TA = 25°C
15
0
2
4
6
8
10
12
14
16
18
20
| VCC ± | – Supply Voltage – V
| VCC ± | – Supply Voltage – V
Figure 11
Figure 10
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
19
TLE2161, TLE2161A, TLE2161B
EXCALIBUR JFET-INPUT HIGH-OUTPUT-DRIVE
µPOWER OPERATIONAL AMPLIFIERS
SLOS049D – NOVEMBER 1989 – REVISED MAY 1996
TYPICAL CHARACTERISTICS
MAXIMUM PEAK-TO-PEAK
OUTPUT VOLTAGE
vs
FREQUENCY
VOM – Maximum Peak Output Voltage – V
6
RL = 100 Ω
TA = 25°C
4
VOM +
2
0
–2
–4
VOM –
–6
0
2
4
6
8
|VCC ± | – Supply Voltage – V
VO(PP) – Maximum Peak-to-Peak Output Voltage – V
MAXIMUM PEAK OUTPUT VOLTAGE
vs
SUPPLY VOLTAGE
10
10
VCC ± = ± 5 V
RL = 10 kΩ
TA = 25°C
8
6
4
2
0
10 k
VCC ± = ± 15 V
RL = 10 kΩ
TA = 25°C
20
15
10
5
0
10 k
100 k
1M
f – Frequency – Hz
10 M
VO(PP) – Maximum Peak-to-Peak Output Voltage – V
VO(PP) – Maximum Peak-to-Peak Output Voltage – V
MAXIMUM PEAK-TO-PEAK
OUTPUT VOLTAGE
vs
FRQUENCY
25
MAXIMUM PEAK-TO-PEAK
OUTPUT VOLTAGE
vs
FREQUENCY
40
VCC ± = ± 5 V
RL = 10 kΩ
TA = 25°C
35
30
25
20
15
10
5
0
10 k
Figure 14
20
10 M
Figure 13
Figure 12
30
100 k
1M
f – Frequency – Hz
100 k
1M
f – Frequency – Hz
Figure 15
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
10 M
TLE2161, TLE2161A, TLE2161B
EXCALIBUR JFET-INPUT HIGH-OUTPUT-DRIVE
µPOWER OPERATIONAL AMPLIFIERS
SLOS049D – NOVEMBER 1989 – REVISED MAY 1996
TYPICAL CHARACTERISTICS†
LARGE-SIGNAL DIFFERENTIAL VOLTAGE
AMPLIFICATION AND PHASE SHIFT
vs
FRQUENCY
LARGE-SIGNAL DIFFERENTIAL
VOLTAGE AMPLIFICATION
vs
FREE-AIR TEMPERATURE
120
60°
400
100
80°
350
80
100°
AVD
60
120°
40
140°
20
160°
ÁÁ
ÁÁ
ÁÁ
VCC ± = ± 15 V
RL = 10 kΩ
CL = 100 pF
TA = 25°C
0
– 20
0.1
1
180°
200°
100 k 1 M 10 M
10 100 1 k 10 k
f – Frequency – Hz
AVD
AVD – Large-Signal Differential
Voltage Amplification – V/mV
Phase Shift
Phase Shift
AVD
AVD – Large-Signal Differential
Voltage Amplification – dB
RL = 10 kΩ
300
250
200
ÁÁ
ÁÁ
ÁÁ
VCC ± = ± 15 V
150
100
50
VCC ± = ± 5 V
0
– 75 – 50 – 25
0
25
50
75 100
TA – Free-Air Temperature – °C
Figure 17
Figure 16
SHORT-CIRCUIT OUTPUT CURRENT
vs
ELAPSED TIME
LARGE-SIGNAL VOLTAGE AMPLIFICATION
vs
FREE-AIR TEMPERATURE
80
80
VCC ± = ± 15 V
VO = 0
I OS – Short-Circuit Output Current – mA
I OS – Short-Circuit Output Current – mA
VID = – 100 mV
60
40
20
VCC ± = ± 15 V
TA = 25°C
VO = 0
0
– 20
– 40
VID = 100 mV
– 60
– 80
0
10
125
20
30
40
t – Elapsed Time – s
50
60
60
40
VID = –100 mV
20
0
– 20
VID = 100 mV
– 40
– 60
– 80
– 75 – 50 – 25
0
25
50
75 100
TA – Free-Air Temperature – °C
Figure 18
125
Figure 19
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
21
TLE2161, TLE2161A, TLE2161B
EXCALIBUR JFET-INPUT HIGH-OUTPUT-DRIVE
µPOWER OPERATIONAL AMPLIFIERS
SLOS049D – NOVEMBER 1989 – REVISED MAY 1996
TYPICAL CHARACTERISTICS†
1000
VCC ± = ± 15 V
TA = 25°C
100
z o – Output Impedance – Ω
COMMON-MODE REJECTION RATIO
vs
FREQUENCY
CMRR – Common-Mode Rejection Ratio – dB
OUTPUT IMPEDANCE
vs
FREQUENCY
AVD =100
10
AVD = 10
1
0.1
AVD = 1
0.01
0.001
10
100
1k
10 k
100 k
100
VCC ± = ± 5 V
TA = 25°C
80
60
40
20
0
10
1M
100
1k
100 k
1M
10 M
f – Frequency – Hz
f – Frequency – Hz
Figure 20
Figure 21
SUPPLY CURRENT
vs
SUPPLY VOLTAGE
SUPPLY CURRENT
vs
FREE-AIR TEMPERATURE
340
340
VO = 0
No Load
VO = 0
No Load
320
I CC – Supply Current – µ A
I CC – Supply Current – µ A
10 k
TA = 125°C
300
TA = 25°C
280
260
320
300
VCC ± = ± 15 V
280
VCC ± = ± 5 V
260
TA = – 55°C
240
0
2
4
6
8
10
12
14
16
18
20
240
–75
– 50
– 25
0
25
50
75
100
125
TA – Free-Air Temperature – °C
|VCC ±| – Supply Voltage – V
Figure 22
Figure 23
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
22
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
TLE2161, TLE2161A, TLE2161B
EXCALIBUR JFET-INPUT HIGH-OUTPUT-DRIVE
µPOWER OPERATIONAL AMPLIFIERS
SLOS049D – NOVEMBER 1989 – REVISED MAY 1996
TYPICAL CHARACTERISTICS
SMALL-SIGNAL
PULSE RESPONSE
SMALL-SIGNAL
PULSE RESPONSE
100
VO – Output Voltage – mV
VO – Output Voltage – mV
100
50
0
VCC± = ± 5 V
AVD = 5
RL = 10 kΩ
CL = 100 pF
TA = 25°C
See Figure 1
– 50
0.5
1
0
VCC ± = ± 15 V
AVD = 5
RL = 10 kΩ
CL = 100 pF
TA = 25°C
See Figure 1
– 50
– 100
0
50
1.5
2
2.5
3
– 100
0
0.5
t – Time – µs
Figure 24
15
3
10
VO – Output Voltage – V
VO – Output Voltage – V
2
2.5
3
LARGE-SIGNAL
PULSE RESPONSE
4
2
1
VCC ± = ± 5 V
AVD = 5
RL = 10 kΩ
CL = 100 pF
TA = 25°C
See Figure 1
–1
1.5
Figure 25
LARGE-SIGNAL
PULSE RESPONSE
0
1
t – Time – µs
5
0
–5
– 10
VCC± = ±15 V
AVD = 5
RL = 10 kΩ
CL = 100 pF
TA = 25°C
See Figure 1
– 15
–2
0
5
t – Time – µs
10
0
15
Figure 26
10
20
t – Time – µs
30
40
Figure 27
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
23
TLE2161, TLE2161A, TLE2161B
EXCALIBUR JFET-INPUT HIGH-OUTPUT-DRIVE
µPOWER OPERATIONAL AMPLIFIERS
SLOS049D – NOVEMBER 1989 – REVISED MAY 1996
TYPICAL CHARACTERISTICS
NOISE VOLTAGE
(REFERRED TO INPUT)
OVER A 10-SECOND INTERVAL
EQUIVALENT INPUT NOISE VOLTAGE
vs
FREQUENCY
Vn – Equivalent Input Noise Voltage – nV/ Hz
1
Vn – Noise Voltage – uV
µ
VCC ± = ± 15 V
f = 0.1 to 10 Hz
TA = 25°C
0.5
0
– 0.5
–1
0
1
2
3
4
5
6
7
8
9
100
80
60
40
20
0
10
VCC ± = ± 5 V
RS = 20 Ω
TA = 25°C
See Figure 2
1
10
t – Time – s
100
Figure 29
TOTAL HARMONIC DISTORTION
vs
FREQUENCY
TOTAL HARMONIC DISTORTION
vs
FREQUENCY
ÏÏÏÏÏ
0.15
0.1
Source Signal
0.05
0
10
100
1k
t – Frequency – Hz
ÏÏÏÏÏÏ
0.6
VCC ± = ± 5 V
AVD = 2
VO(PP) = 2 V
TA = 25°C
THD – Total Harmonic Distortion – %
THD – Total Harmonic Distortion – %
0.2
10 k
100 k
0.5
VCC ± = ± 5 V
AVD = 10
VO(PP) = 2 V
TA = 25°C
0.4
0.3
0.2
Source Signal
0.1
0
10
100
1k
10 k
f – Frequency – Hz
Figure 31
Figure 30
24
10 k
f – Frequency – Hz
Figure 28
0.25
1k
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
100 k
TLE2161, TLE2161A, TLE2161B
EXCALIBUR JFET-INPUT HIGH-OUTPUT-DRIVE
µPOWER OPERATIONAL AMPLIFIERS
SLOS049D – NOVEMBER 1989 – REVISED MAY 1996
TYPICAL CHARACTERISTICS
GAIN-BANDWIDTH PRODUCT
vs
SUPPLY VOLTAGE
GAIN-BANDWIDTH PRODUCT
vs
FREE-AIR TEMPERATURE
7
f = 100 kHz
RL = 10 kΩ
CL = 100 pF
TA = 25°C
See Figure 3
6.6
Gain-Bandwidth Product – MHz
Gain-Bandwidth Product – MHz
7
6.2
5.8
5.4
5
0
4
8
12
6.6
VCC ± = ± 15 V
6.2
5.8
VCC ± = ± 5 V
5.4
5
– 75
20
16
f = 100 kHz
RL = 10 kΩ
CL = 100 pF
See Figure 3
|VCC ± | – Supply Voltage – V
– 50 – 25
0
25
50
75 100
TA – Free-Air Temperature – °C
Figure 32
Figure 33
PHASE MARGIN
vs
FREE-AIR TEMPERATURE
PHASE MARGIN
vs
SUPPLY VOLTAGE
74°
AVD = 5
RL = 10 kΩ
CL = 100 pF
See Figure 3
76°
φ m – Phase Margin
72°
φ m – Phase Margin
78°
AVD = 5
RL = 10 kΩ
CL = 100 pF
TA = 25°C
See Figure 3
73°
71°
ÁÁ
ÁÁ
74°
72°
ÁÁ
ÁÁ
70°
69°
VCC ± = ± 5 V
70°
68°
68°
67°
0
2
125
4
6
8
10 12 14 16
|VCC ± | – Supply Voltage – V
18
20
66°
– 75
VCC ± = ± 15 V
– 50
– 25
0
25
50
75
TA – Free-Air Temperature – °C
Figure 34
100
125
Figure 35
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
25
TLE2161, TLE2161A, TLE2161B
EXCALIBUR JFET-INPUT HIGH-OUTPUT-DRIVE
µPOWER OPERATIONAL AMPLIFIERS
SLOS049D – NOVEMBER 1989 – REVISED MAY 1996
APPLICATION INFORMATION
macromodel information
Macromodel information provided was derived using Microsim Parts , the model generation software used
with Microsim PSpice . The Boyle macromodel (see Note 5) and subcircuit in Figure 36 and Figure 37 were
generated using the TLE2161 typical electrical and operating characteristics at 25°C. Using this information,
output simulations of the following key parameters can be generated to a tolerance of 20% (in most cases):
•
•
•
•
•
•
•
•
•
•
•
•
Maximum positive output voltage swing
Maximum negative output voltage swing
Slew rate
Quiescent power dissipation
Input bias current
Open-loop voltage amplification
Gain-bandwidth product
Common-mode rejection ratio
Phase margin
DC output resistance
AC output resistance
Short-circuit output current limit
99
+
9
3
VCC+
rss
+
vb
iss
rp
IN –
2
dp
IN +
1
j1
vc
j2
11
fb
dc
+ dlp
hlim
VCC –
vln
+
+
gcm
ga
vlim
–
ro1
rd2
54
4
ve
–
7
8
+
91
+
vlp
–
C2
6
C1
rd1
92
90
–
r2
–
53
12
–
ro2
–
+
10
dln
egnd
de
5
–
OUT
Figure 36. Boyle Macromodel
NOTE 5: G. R. Boyle, B. M. Cohn, D. O. Pederson, and J. E. Solomon, ”Macromodeling of Integrated Circuit Operational Amplifiers”, IEEE
Journal of Solid-State Circuits, SC-9, 353 (1974).
PSpice and Parts are trademark of MicroSim Corporation.
26
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
TLE2161, TLE2161A, TLE2161B
EXCALIBUR JFET-INPUT HIGH-OUTPUT-DRIVE
µPOWER OPERATIONAL AMPLIFIERS
SLOS049D – NOVEMBER 1989 – REVISED MAY 1996
APPLICATION INFORMATION
macromodel information (continued)
.subckt TLE2161 1 2 3 4 5
c1
11 12 125.4E–14
c2
6
7 5.000E–12
dc
5 53 dx
de
54 5d x
dlp
90 91 dx
dln
92 90 dx
dp
4
3 dx
egnd 99
0 poly(2) (3,0) (4,0) 0 .5 .5
fb
7 99 poly(5) vb vc ve vlp vln 0 4.085E6 –4E6 4E6 4E6 –4E6
ga
6
0 11 12 201.1E–6
gcm
0
6 10 99 3.576E–9
iss
3 10 dc 45.00E–6
hlim 90
0 vlim 1K
j1
11
2 10 jx
j2
12
1 10 jx
r2
6
9 100.0E3
rd1
4 11 4.973E3
rd2
4 12 4.973E3
ro1
8
5 280
ro2
7 99 280
rp
3
4 113.2E3
rss
10 99 4.444E6
vb
9
0 dc 0
vc
3 53 dc 2
ve
54
4 dc 2
vlim
7
8 dc 0
vlp
91
0 dc 50
vln
0 92 dc 50
.model dx
D (Is=800.0E–18)
.model jx PJF (Is=1.000E–12 Beta=480E–6 Vto=–1)
.ends
Figure 37. Macromodel Subcircuit
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
27
TLE2161, TLE2161A, TLE2161B
EXCALIBUR JFET-INPUT HIGH-OUTPUT-DRIVE
µPOWER OPERATIONAL AMPLIFIERS
SLOS049D – NOVEMBER 1989 – REVISED MAY 1996
APPLICATION INFORMATION
input characteristics
The TLE2161, TLE2161A and TLE2161B are specified with a minimum and a maximum input voltage that if
exceeded at either input could cause the device to malfunction.
Because of the extremely high input impedance and resulting low bias-current requirements, the TLE2161,
TLE2161A, and TLE2161B are well suited for low-level signal processing; however, leakage currents on printed
circuit boards and sockets can easily exceed bias-current requirements and cause degradation in system
performance. It is a good practice to include guard rings around inputs (see Figure 38). These guards should
be driven from a low-impedance source at the same voltage level as the common-mode input.
VI
+
VI
VO
+
VO
–
–
R2
R1
R3
R4
Where R3
R4
+ R2
R1
Figure 38. Use of Guard Rings
input offset voltage nulling
The TLE2161 series offers external null pins that can further reduce the input offset voltage. The circuit in
Figure 39 can be connected as shown if the feature is desired. When external nulling is not needed, the null
pins may be left disconnected.
IN –
–
IN +
+
N1
N2
OUT
100 kΩ
5 kΩ
VCC –
Figure 39. Input Offset Voltage Nulling
28
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
PACKAGE OPTION ADDENDUM
www.ti.com
17-Dec-2015
PACKAGING INFORMATION
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
MSL Peak Temp
(2)
(6)
(3)
Op Temp (°C)
Device Marking
(4/5)
5962-9095801QPA
ACTIVE
CDIP
JG
8
1
TBD
A42
N / A for Pkg Type
-55 to 125
9095801QPA
TLE2161M
5962-9095802QPA
ACTIVE
CDIP
JG
8
1
TBD
A42
N / A for Pkg Type
-55 to 125
9095802QPA
TLE2161AM
5962-9095803QPA
ACTIVE
CDIP
JG
8
1
TBD
A42
N / A for Pkg Type
-55 to 125
9095803QPA
TLE2161BM
TLE2161ACD
ACTIVE
SOIC
D
8
75
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
TLE2161ACP
OBSOLETE
PDIP
P
8
TBD
Call TI
Call TI
0 to 70
TLE2161AID
ACTIVE
SOIC
D
8
75
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
2161AI
TLE2161AIDG4
ACTIVE
SOIC
D
8
75
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
2161AI
TLE2161AIDR
ACTIVE
SOIC
D
8
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
2161AI
TBD
Call TI
Call TI
TBD
A42
N / A for Pkg Type
-55 to 125
0 to 70
2161AC
TLE2161AIP
OBSOLETE
PDIP
P
8
TLE2161AMJGB
ACTIVE
CDIP
JG
8
TLE2161BCP
OBSOLETE
PDIP
P
8
TBD
Call TI
Call TI
TLE2161BIP
OBSOLETE
PDIP
P
8
TBD
Call TI
Call TI
TLE2161BMJGB
ACTIVE
CDIP
JG
8
TBD
A42
N / A for Pkg Type
-55 to 125
TLE2161BMP
OBSOLETE
PDIP
P
8
TBD
Call TI
Call TI
-55 to 125
TLE2161CD
ACTIVE
SOIC
D
8
75
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
2161C
TLE2161CDG4
ACTIVE
SOIC
D
8
75
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
2161C
TLE2161CP
OBSOLETE
PDIP
P
8
TBD
Call TI
Call TI
0 to 70
TLE2161ID
ACTIVE
SOIC
D
8
75
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
2161I
TLE2161IDG4
ACTIVE
SOIC
D
8
75
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
2161I
1
1
Addendum-Page 1
9095802QPA
TLE2161AM
9095803QPA
TLE2161BM
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
17-Dec-2015
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
MSL Peak Temp
(2)
(6)
(3)
Op Temp (°C)
Device Marking
(4/5)
TLE2161IDR
ACTIVE
SOIC
D
8
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
2161I
TLE2161IDRG4
ACTIVE
SOIC
D
8
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
2161I
TLE2161IP
OBSOLETE
PDIP
P
8
TBD
Call TI
Call TI
TLE2161MJGB
ACTIVE
CDIP
JG
8
TBD
A42
N / A for Pkg Type
-55 to 125
TLE2161MP
OBSOLETE
PDIP
P
8
TBD
Call TI
Call TI
-55 to 125
1
9095801QPA
TLE2161M
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3)
MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
(4)
There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.
(5)
Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation
of the previous line and the two combined represent the entire Device Marking for that device.
(6)
Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish
value exceeds the maximum column width.
Addendum-Page 2
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
17-Dec-2015
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
OTHER QUALIFIED VERSIONS OF TLE2161, TLE2161A, TLE2161AM, TLE2161B, TLE2161BM, TLE2161M :
• Catalog: TLE2161A, TLE2161B, TLE2161
• Military: TLE2161M, TLE2161AM, TLE2161BM
NOTE: Qualified Version Definitions:
• Catalog - TI's standard catalog product
• Military - QML certified for Military and Defense Applications
Addendum-Page 3
PACKAGE MATERIALS INFORMATION
www.ti.com
14-Jul-2012
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
Package Package Pins
Type Drawing
SPQ
Reel
Reel
A0
Diameter Width (mm)
(mm) W1 (mm)
B0
(mm)
K0
(mm)
P1
(mm)
W
Pin1
(mm) Quadrant
TLE2161AIDR
SOIC
D
8
2500
330.0
12.4
6.4
5.2
2.1
8.0
12.0
Q1
TLE2161IDR
SOIC
D
8
2500
330.0
12.4
6.4
5.2
2.1
8.0
12.0
Q1
TLE2161IDR
SOIC
D
8
2500
330.0
12.4
6.4
5.2
2.1
8.0
12.0
Q1
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
14-Jul-2012
*All dimensions are nominal
Device
Package Type
Package Drawing
Pins
SPQ
Length (mm)
Width (mm)
Height (mm)
TLE2161AIDR
SOIC
D
8
2500
340.5
338.1
20.6
TLE2161IDR
SOIC
D
8
2500
367.0
367.0
35.0
TLE2161IDR
SOIC
D
8
2500
340.5
338.1
20.6
Pack Materials-Page 2
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of
non-designated products, TI will not be responsible for any failure to meet ISO/TS16949.
Products
Applications
Audio
www.ti.com/audio
Automotive and Transportation
www.ti.com/automotive
Amplifiers
amplifier.ti.com
Communications and Telecom
www.ti.com/communications
Data Converters
dataconverter.ti.com
Computers and Peripherals
www.ti.com/computers
DLP® Products
www.dlp.com
Consumer Electronics
www.ti.com/consumer-apps
DSP
dsp.ti.com
Energy and Lighting
www.ti.com/energy
Clocks and Timers
www.ti.com/clocks
Industrial
www.ti.com/industrial
Interface
interface.ti.com
Medical
www.ti.com/medical
Logic
logic.ti.com
Security
www.ti.com/security
Power Mgmt
power.ti.com
Space, Avionics and Defense
www.ti.com/space-avionics-defense
Microcontrollers
microcontroller.ti.com
Video and Imaging
www.ti.com/video
RFID
www.ti-rfid.com
OMAP Applications Processors
www.ti.com/omap
TI E2E Community
e2e.ti.com
Wireless Connectivity
www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2015, Texas Instruments Incorporated
工商网监
湘ICP备2023018690号
