TLV2361CDBVR

TLV2361, TLV2362 HIGH-PERFORMANCE LOW-VOLTAGE OPERATIONAL AMPLIFIERS
SLOS195H − FEBRUARY 1997 − REVISED JUNE 2007 D Low Supply-Voltage TLV2361 . . . DBV PACKAGE (TOP VIEW) Operation . . . VCC = ±1 V Min D Wide Bandwidth . . . 7 MHz Typ at D D D IN+ VCC− IN− VCC± = ±2.5 V High Slew Rate . . . 3 V/µs Typ at VCC± = ±2.5 V Wide Output Voltage Swing . . . ±2.4 V Typ at VCC± = ±2.5 V, RL = 10 kΩ Low Noise . . . 8 nV/√Hz Typ at f = 1 kHz 1 5 VCC+ 4 OUT 2 3 TLV2362 . . . D, DGK, P, PS, OR PW PACKAGE (TOP VIEW) 1OUT 1IN− 1IN+ VCC− description/ordering information 1 8 2 7 3 6 VCC+ 2OUT 2IN− 2IN+ The TLV236x devices are high-performance dual 4 5 operational amplifiers built using an original Texas Instruments bipolar process. These devices can be operated at a very low supply voltage (±1 V), while maintaining a wide output swing. The TLV236x devices offer a dramatically improved dynamic range of signal conditioning in low-voltage systems. The TLV236x devices also provide higher performance than other general-purpose operational amplifiers by combining higher unity-gain bandwidth and faster slew rate. With their low distortion and low-noise performance, these devices are well suited for audio applications. ORDERING INFORMATION −0°C 0°C to 70°C TOP-SIDE MARKING‡ Reel of 3000 TLV2361CDBVR Reel of 250 TLV2361CDBVT Reel of 3000 TLV2361IDBVR Reel of 250 TLV2361IDBVT MSOP/VSSOP (DGK) Reel of 2500 TLV2362IDGKR YBS PDIP (P) Tube of 50 TLV2362IP TLV2362IP Tube of 75 TLV2362ID Reel of 2500 TLV2362IDR Reel of 2000 TLV2362IPSR Tube of 150 TLV2362IPW Reel of 2000 TLV2362IPWR SOT 23 5 (DBV) SOT-23-5 SOT 23 5 (DBV) SOT-23-5 −40°C 40 C to 85°C 85 C ORDERABLE PART NUMBER PACKAGE† TA SOIC (D) SOP (PS) TSSOP (PW) YC3 YC3_ YC4 YC4_ 2362I TY2362 TY2362 † Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. ‡ DBV: The actual top-side marking has one additional character that designates the wafer fab/assembly site. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Copyright  2007, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. • POST OFFICE BOX 655303 DALLAS, TEXAS 75265 POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443 • 1 TLV2361, TLV2362 HIGH-PERFORMANCE LOW-VOLTAGE OPERATIONAL AMPLIFIERS
SLOS195H − FEBRUARY 1997 − REVISED JUNE 2007 equivalent schematic (each amplifier) VCC+ IN+ IN− OUT VCC− ACTUAL DEVICE COMPONENT COUNT COMPONENT TLV2361 TLV2362 30 46 Resistors 6 11 Diodes 1 1 Capacitors 2 4 JFET 1 1 Transistors 2 • POST OFFICE BOX 655303 DALLAS, TEXAS 75265 POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443 • TLV2361, TLV2362 HIGH-PERFORMANCE LOW-VOLTAGE OPERATIONAL AMPLIFIERS
SLOS195H − FEBRUARY 1997 − REVISED JUNE 2007 absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† Supply voltage, VCC+ (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.5 V Supply voltage, VCC− (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −3.5 V Differential input voltage, VID (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±3.5 V Input voltage, VI (any input) (see Notes 1 and 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VCC± Output voltage, VO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±3.5 V Output current, IO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 mA Duration of short-circuit current at (or below) 25°C (output shorted to GND) . . . . . . . . . . . . . . . . . . . Unlimited Package thermal impedance, θJA (see Notes 4 and 5): D package . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97°C/W DBV package . . . . . . . . . . . . . . . . . . . . . . . . 206°C/W DGK package . . . . . . . . . . . . . . . . . . . . . . . . 172°C/W P package . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85°C/W PS package . . . . . . . . . . . . . . . . . . . . . . . . . . . 95°C/W PW package . . . . . . . . . . . . . . . . . . . . . . . . . 149°C/W Operating virtual junction temperature, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150°C Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65°C to 150°C † Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. All voltage values, except differential voltages, are with respect to the midpoint between VCC+ and VCC−. 2. Differential voltages are at IN+ with respect to IN−. 3. All input voltage values must not exceed VCC. 4. Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable ambient temperature is PD = (TJ(max) − TA)/θJA. Selecting the maximum of 150°C can affect reliability. 5. The package thermal impedance is calculated in accordance with JESD 51-7. recommended operating conditions VCC Supply voltage TA free air temperature Operating free-air TLV2361C TLV2361I, TLV2362I • POST OFFICE BOX 655303 DALLAS, TEXAS 75265 POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443 • MIN MAX UNIT ±1 ±2.5 V 0 70 −40 85 °C 3 TLV2361, TLV2362 HIGH-PERFORMANCE LOW-VOLTAGE OPERATIONAL AMPLIFIERS
SLOS195H − FEBRUARY 1997 − REVISED JUNE 2007 TLV2361 and TLV2362 electrical characteristics, VCC± = ±1.5 V (unless otherwise noted) PARAMETER TEST CONDITIONS MIN TA 25°C TYP 1 MAX UNIT 6 VIO Input offset voltage VO = 0 0, VIC = 0 IIO Input offset current VO = 0 0, VIC = 0 IIB Input bias current VO = 0 0, VIC = 0 VIC Common-mode Common mode input voltage |VIO| ≤ 7 5 mV 7.5 VOM+ Maximum positive-peak positive peak output voltage VOM− Maximum negative negative-peak peak output voltage ICC Supply current (per amplifier) AVD Large signal differential Large-signal voltage amplification VO = ±1 V V, CMRR Common-mode rejection ratio VIC = ±0.5 V 25°C 75 dB kSVR Supply-voltage rejection ratio VCC± = ±1.5 V to ±2.5 V 25°C 80 dB Full range 7.5 25°C 5 Full range 20 Full range 25°C ±0.5 ±0.5 RL = 10 kΩ 25°C 1.2 RL ≥ 10 kΩ Full range 1.2 RL = 10 kΩ 25°C −1.2 RL ≥ 10 kΩ Full range −1.2 25°C No load 1.4 V −1.4 V Full range RL = 10 kΩ TLV2362 60 25°C nA V 1.4 TLV2361 nA 150 250 Full range VO = 0 0, 100 150 25°C mV 2.25 mA 2.75 mA 80 dB 55 TLV2361 and TLV2362 operating characteristics, VCC± = ±1.5 V, TA = 25°C PARAMETER 4 TEST CONDITIONS SR Slew rate AV = 1, VI = ±0.5 V B1 Unity-gain bandwidth AV = 40, RL = 10 kΩ, Vn Equivalent input noise voltage RS = 100 Ω, RF = 10 kΩ, • POST OFFICE BOX 655303 DALLAS, TEXAS 75265 POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443 • TYP UNIT 2.5 V/µs CL = 100 pF 6 MHz f = 1 kHz 9 nV/√Hz TLV2361, TLV2362 HIGH-PERFORMANCE LOW-VOLTAGE OPERATIONAL AMPLIFIERS
SLOS195H − FEBRUARY 1997 − REVISED JUNE 2007 TLV2361 and TLV2362 electrical characteristics, VCC± = ±2.5 V (unless otherwise noted) PARAMETER TEST CONDITIONS TA MIN TYP 25°C 1 MAX UNIT 6 VIO Input offset voltage VO = 0 0, VIC = 0 IIO Input offset current VO = 0 0, VIC = 0 IIB Input bias current VO = 0 0, VIC = 0 VIC Common-mode Common mode input voltage |VIO| ≤ 7 5 mV 7.5 Maximum positive-peak positive peak output voltage RL = 10 kΩ 25°C 2 VOM+ RL ≥ 10 kΩ Full range 2 Maximum negative negative-peak peak output voltage RL = 10 kΩ 25°C −2 VOM− RL ≥ 10 kΩ Full range −2 ICC Supply current (per amplifier) VO = 0 0, No load AVD Large signal differential Large-signal voltage amplification VO = ±1 V V, RL = 10 kΩ CMRR Common-mode rejection ratio VIC = ±0.5 V 25°C 85 dB kSVR Supply-voltage rejection ratio VCC± = ±1.5 V to ±2.5 V 25°C 80 dB Full range 7.5 25°C 5 Full range 20 Full range 25°C ±1.5 ±1.4 25°C 2.4 V −2.4 V 1.75 2.5 3 60 25°C nA V Full range TLV2361 nA 150 250 Full range TLV2362 100 150 25°C mV mA 80 dB 60 TLV2361 and TLV2362 operating characteristics, VCC± = ±2.5 V, TA = 25°C PARAMETER TEST CONDITIONS SR Slew rate AV = 1, VI = ±0.5 V B1 Unity-gain bandwidth AV = 40, RL = 10 kΩ, Vn Equivalent input noise voltage RS = 100 Ω, THD + N Total harmonic distortion, plus noise AV = 1, • UNIT 3 V/µs CL = 100 pF 7 MHz RF = 10 kΩ, f = 1 kHz 8 nV/√Hz VO = ±1.2 V, RL = 10 kΩ, f = 3 kHz POST OFFICE BOX 655303 DALLAS, TEXAS 75265 POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443 • TYP 0.004 % 5 TLV2361, TLV2362 HIGH-PERFORMANCE LOW-VOLTAGE OPERATIONAL AMPLIFIERS SLOS195H − FEBRUARY 1997 − REVISED JUNE 2007 TYPICAL CHARACTERISTICS Table of Graphs GRAPH TITLE 6 FIGURE Supply current vs Free-air temperature 1 Supply current vs Supply voltage 2 Maximum positive output voltage vs Output current 3 Maximum negative output voltage vs Output current 4 Maximum peak-to-peak output voltage vs Frequency 5 Equivalent input noise voltage vs Frequency 6 Total harmonic distortion vs Frequency 7 Total harmonic distortion vs Output voltage 8 • POST OFFICE BOX 655303 DALLAS, TEXAS 75265 POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443 •
TLV2361, TLV2362 HIGH-PERFORMANCE LOW-VOLTAGE OPERATIONAL AMPLIFIERS
SLOS195H − FEBRUARY 1997 − REVISED JUNE 2007 TYPICAL CHARACTERISTICS SUPPLY CURRENT vs FREE-AIR TEMPERATURE SUPPLY CURRENT vs SUPPLY VOLTAGE 2.5 2.5 VO = 0 No Load Per Channel I CC − Supply Current − mA I CC − Supply Current − mA 2 VCC = ±2.5 V 1.5 VCC = ±1.5 V 1 0.5 TA = 25°C TA = 0°C 2 TA = −40°C 1.5 1 0.5 0 −50 0 −25 0 25 50 75 0 100 ±1 Figure 1 VOM− − Maximum Positive Output Voltage − V VOM+ − Maximum Positive Output Voltage − V 1.5 VCC± = ±1.5 V 1 0.5 0 −1.2 ±5 0 TA = 25°C 2 −0.8 ±4 MAXIMUM NEGATIVE OUTPUT VOLTAGE vs OUTPUT CURRENT 2.5 −0.4 ±3 Figure 2 MAXIMUM POSITIVE OUTPUT VOLTAGE vs OUTPUT CURRENT VCC± = ±2.5 V ±2 VCC± − Supply Voltage − V TA − Free-Air Temperature − °C 0 TA = 85°C TA = 75°C VO = 0 No Load Per Channel −1.8 −0.5 −1 VCC± = ±1.5 V −1.5 −2 VCC± = ±2.5 V −2.5 −2 0 IO − Output Current − mA 4 8 12 16 20 IO − Output Current − mA Figure 3 Figure 4 • POST OFFICE BOX 655303 DALLAS, TEXAS 75265 POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443 • 7 TLV2361, TLV2362 HIGH-PERFORMANCE LOW-VOLTAGE OPERATIONAL AMPLIFIERS
SLOS195H − FEBRUARY 1997 − REVISED JUNE 2007 TYPICAL CHARACTERISTICS EQUIVALENT INPUT NOISE VOLTAGE vs FREQUENCY 50 5 V n − Equivalent Input Noise Voltage − nV/ Hz VO(PP) − Maximum Peak-to-Peak Output Voltage − V MAXIMUM PEAK-TO-PEAK OUTPUT VOLTAGE vs FREQUENCY VCC± = ±2.5 V 4 3 VCC± = ±1.5 V 2 1 TA = 25°C RL = 10 kΩ 0 1k 10 k 1M 100 k VCC± = ±2.5 V TA = 25°C RS = 100 Ω 40 30 20 10 0 10 10 M f − Frequency − Hz Figure 5 Figure 6 10 k TOTAL HARMONIC DISTORTION vs OUTPUT VOLTAGE 10 1 1 THD − Total Harmonic Distortion − % VCC± = ±2.5 V RS = 10 kΩ RL = 10 kΩ VO = ±1.2 V AV = 100 0.1 AV = 10 0.01 AV = 1 VCC± = ±3 V RS = 10 kΩ RL = 4 kΩ AV = 10 V 0.1 0.01 20 kHz 20 Hz 0.001 1 kHz 0.0001 0.001 0 20 40 60 80 100 0 0.5 1 1.5 VO(rms) − Output Voltage − V f − Frequency − kHz Figure 7 8 1k f − Frequency − Hz TOTAL HARMONIC DISTORTION vs FREQUENCY THD − Total Harmonic Distortion − % 100 Figure 8 • POST OFFICE BOX 655303 DALLAS, TEXAS 75265 POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443 • 2 PACKAGE OPTION ADDENDUM www.ti.com 13-Jul-2022 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan (2) Lead finish/ Ball material MSL Peak Temp Op Temp (°C) Device Marking (3) Samples (4/5) (6) TLV2361CDBVR ACTIVE SOT-23 DBV 5 3000 RoHS & Green NIPDAU | SN Level-1-260C-UNLIM 0 to 70 (YC3B, YC3G, YC3J, YC3L) Samples TLV2361CDBVT ACTIVE SOT-23 DBV 5 250 RoHS & Green NIPDAU | SN Level-1-260C-UNLIM 0 to 70 (YC3B, YC3G, YC3J, YC3L) Samples TLV2361IDBVR ACTIVE SOT-23 DBV 5 3000 RoHS & Green NIPDAU | SN Level-1-260C-UNLIM -40 to 85 (YC4B, YC4G, YC4J, YC4L) Samples TLV2361IDBVT ACTIVE SOT-23 DBV 5 250 RoHS & Green NIPDAU | SN Level-1-260C-UNLIM -40 to 85 (YC4B, YC4G, YC4J, YC4L) Samples TLV2362ID ACTIVE SOIC D 8 75 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 2362I Samples TLV2362IDGKR ACTIVE VSSOP DGK 8 2500 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 (YBL, YBS, YBU) Samples TLV2362IDR ACTIVE SOIC D 8 2500 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 2362I Samples TLV2362IP ACTIVE PDIP P 8 50 RoHS & Green NIPDAU N / A for Pkg Type -40 to 85 TLV2362IP Samples TLV2362IPWR ACTIVE TSSOP PW 8 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 TY2362 Samples (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of