TLV1393, TLV1393Y, TLV2393, TLV2393Y
DUAL DIFFERENTIAL COMPARATORS
SLCS121A – AUGUST 1993 – REVISED APRIL 1994
D
D
D
D
D
D, P, OR PW PACKAGE
(TOP VIEW)
Low-Voltage and Single-Supply Operation
VCC = 2 V to 7 V
Common-Mode Voltage Range Includes
Ground
Fast Response Time
450 ns Typ (TLV2393)
Low Supply Current
0.16 mA Typ (TLV1393)
Fully Specified at 3-V and 5-V Supply
Voltages
1OUT
1IN –
1IN+
GND
1
8
2
7
3
6
4
5
VCC
2OUT
2IN –
2IN+
description
The TLV1393 and the TLV2393 are dual differential comparators built using a new Texas Instruments
low-voltage, high-speed bipolar process. These devices have been specifically developed for low-voltage,
single-supply applications. Their enhanced performance makes them excellent replacements for the LM393 in
today’s improved 3-V and 5-V system designs.
The TLV1393, with its typical supply current of only 0.16 mA, is ideal for low-power systems. Response time
has also been improved to 0.7 µs. For higher-speed applications, the TLV2393 features excellent ac
performance with a response time of just 0.45 µs, three times that of the LM393.
Package availability for these devices includes the TSSOP (thin-shrink small-outline package). With a
maximum thickness of 1.1 mm and a package area that is 25% smaller than the standard surface-mount
package, the TSSOP is ideal for high-density circuits, particularly in hand-held and portable equipment.
AVAILABLE OPTIONS
PACKAGED DEVICES
TA
– 40°C to 105°C
SUPPLY CURRENT
(TYP)
RESPONSE TIME
(TYP)
SMALL OUTLINE
(D)
PLASTIC DIP
(P)
0.16 mA
1.1 mA
0.7 µs
µ
0.45 µs
TLV1393ID
TLV2393ID
TLV1393IP
TLV2393IP
TSSOP
(PW)†
TLV1393IPWLE
TLV2393IPWLE
CHIP FORM
(Y)
TLV1393Y
TLV2393Y
† The PW packages are only available left-ended taped and reeled (e.g., TLV1393IPWLE).
symbol (each comparator)
IN+
OUT
IN –
Copyright 1994, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
1
TLV1393, TLV1393Y, TLV2393, TLV2393Y
DUAL DIFFERENTIAL COMPARATORS
SLCS121A – AUGUST 1993 – REVISED APRIL 1994
TLV1393, TLV1393Y equivalent schematic (each comparator)
VCC
IN +
IN –
GND
OUT
COMPONENT COUNT
Transistors
Resistors
Diodes
Epi-FET
E i FET
2
POST OFFICE BOX 655303
44
1
7
2
• DALLAS, TEXAS 75265
TLV1393, TLV1393Y, TLV2393, TLV2393Y
DUAL DIFFERENTIAL COMPARATORS
SLCS121A – AUGUST 1993 – REVISED APRIL 1994
TLV2393, TLV2393Y equivalent schematic (each comparator)
VCC
IN +
IN –
GND
OUT
COMPONENT COUNT
Transistors
Resistors
Diodes
Epi-FET
E i FET
POST OFFICE BOX 655303
44
1
7
2
• DALLAS, TEXAS 75265
3
TLV1393, TLV1393Y, TLV2393, TLV2393Y
DUAL DIFFERENTIAL COMPARATORS
SLCS121A – AUGUST 1993 – REVISED APRIL 1994
TLV1393Y chip information
This chip, when properly assembled, displays characteristics similar to the TLV1393. Thermal compression or
ultrasonic bonding may be used on the doped-aluminum bonding pads. Chips may be mounted with conductive
epoxy or a gold-silicon preform.
BONDING PAD ASSIGNMENTS
(7)
(6)
1IN +
1IN –
2OUT
(3)
(2)
VCC
(8)
+
(1)
1OUT
–
+
(7)
–
(5)
(6)
2IN +
2IN –
(4)
GND
(5)
(8)
38
(1)
(4)
CHIP THICKNESS: 13 TYPICAL
BONDING PADS: 3.54 × 3.54 MINIMUM
TJmax = 150°C
TOLERANCES ARE ± 10%.
ALL DIMENSIONS ARE IN MILS.
(3)
(2)
PIN (4) IS INTERNALLY CONNECTED
TO BACKSIDE OF CHIP.
32
4
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
TLV1393, TLV1393Y, TLV2393, TLV2393Y
DUAL DIFFERENTIAL COMPARATORS
SLCS121A – AUGUST 1993 – REVISED APRIL 1994
TLV2393Y chip information
This chip, when properly assembled, displays characteristics similar to the TLV2393. Thermal compression or
ultrasonic bonding may be used on the doped-aluminum bonding pads. Chips may be mounted with conductive
epoxy or a gold-silicon preform.
BONDING PAD ASSIGNMENTS
(7)
(6)
1IN +
1IN –
2OUT
(3)
(2)
VCC
(8)
+
(1)
1OUT
–
+
(7)
–
(5)
(6)
2IN +
2IN –
(4)
GND
(5)
(8)
38
(1)
(4)
CHIP THICKNESS: 15 TYPICAL
BONDING PADS: 3.6 × 3.6 MINIMUM
TJmax = 150°C
TOLERANCES ARE ± 10%.
ALL DIMENSIONS ARE IN MILS.
(3)
(2)
PIN (4) IS INTERNALLY CONNECTED
TO BACKSIDE OF CHIP.
32
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5
TLV1393, TLV1393Y, TLV2393, TLV2393Y
DUAL DIFFERENTIAL COMPARATORS
SLCS121A – AUGUST 1993 – REVISED APRIL 1994
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)†
Supply voltage, VCC (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V
Differential input voltage, VID (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V
Input voltage, VI (any input) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V
Output voltage, VO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V
Output current, IO (each output) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 mA
Duration of short-circuit current to GND (see Note 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . unlimited
Continuous total dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Dissipation Rating Table
Operating free-air temperature range, TA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 40°C to 105°C
Storage temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 65°C to 150°C
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C
† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. All voltage values, except differential voltages, are with respect to the network GND.
2. Differential voltages are at the noninverting input with respect to the inverting input.
3. Short circuits from the outputs to VCC can cause excessive heating and eventual destruction of the chip.
DISSIPATION RATING TABLE
PACKAGE
TA ≤ 25°C
POWER RATING
DERATING FACTOR
ABOVE TA = 25°C
TA = 70°C
POWER RATING
TA = 85°C
POWER RATING
D
725 mW
5.8 mW/° C
464 mW
377 mW
P
1000 mW
8.0 mW/° C
640 mW
520 mW
PW
525 mW
4.2 mW/°C
336 mW
273 mW
recommended operating conditions
MIN
Supply voltage, VCC
Operating free-air temperature, TA
6
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
MAX
UNIT
2
7
V
– 40
105
°C
TLV1393, TLV1393Y, TLV2393, TLV2393Y
DUAL DIFFERENTIAL COMPARATORS
SLCS121A – AUGUST 1993 – REVISED APRIL 1994
electrical characteristics, VCC = 3 V
PARAMETER
VIO
Input offset voltage
VICR
VOL
VO = 1
1.4
4V
V,
VIC = VICRmin
VID = –1 V,
IOL = 500 µA
Input offset current
4V
VO = 1
1.4
IIB
Input bias current
VO = 1
1.4
4V
IOH
High level output current
High-level
VID = 1 V,
VID = 1 V,
VOH = 3 V
VOH = 5 V
IOL
Low-level output current
VID = –1 V,
VOL = 1.5 V
ICCL
Low level supply current
Low-level
MIN
MAX
25°C
1.5
5
Full range
120
9
25°C
0 to
VCC – 1.5
Full range
0 to
VCC – 2
0 to
VCC – 1.2
Full range
25°C
IIO
High level supply current
High-level
TLV1393
TYP
Common mode input voltage range
Common-mode
Low-level output voltage
ICCH
TA†
TEST CONDITIONS
300
5
50
150
25°C
– 40
–250
Full range
– 400
25°C
0.1
Full range
25°C
100
160
nA
nA
nA
250
Full range
300
25°C
VO = VOL
mV
µA
500
25°C
VO = VOH
mV
V
120
Full range
UNIT
160
250
Full range
µA
300
† Full range is – 40°C to 105°C.
switching characteristics, VCC = 3 V, CL = 15 pF, TA = 25°C
PARAMETER
Response time
TEST CONDITIONS
100-mV input step with 5-mV overdrive,
RL connected to 5 V through 5.1 kΩ
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
TLV1393
MIN
TYP
0.7
MAX
UNIT
µs
7
TLV1393, TLV1393Y, TLV2393, TLV2393Y
DUAL DIFFERENTIAL COMPARATORS
SLCS121A – AUGUST 1993 – REVISED APRIL 1994
electrical characteristics, VCC = 5 V
PARAMETER
VIO
Input offset voltage
VICR
VOL
TA†
TEST CONDITIONS
VO = 1
1.4
4V
V,
VIC = VICRmin
IOL = 500 µA
VID = –1 V,
Input offset current
4V
VO = 1
1.4
IIB
Input bias current
VO = 1
1.4
4V
IOH
High level output current
High-level
VID = 1 V,
VID = 1 V,
VOH = 3 V
VOH = 5 V
IOL
Low-level output current
VID = –1 V,
VOL = 1.5 V
ICCL
High level supply current
High-level
Low level supply current
Low-level
MAX
1.5
5
25°C
9
25°C
0 to
VCC – 1.5
Full range
0 to
VCC – 2
0 to
VCC – 1.2
Full range
25°C
IIO
ICCH
TYP
Full range
Common mode input voltage range
Common-mode
Low-level output voltage
TLV1393
MIN
300
5
50
150
25°C
– 40
–250
Full range
– 400
25°C
0.1
Full range
25°C
100
200
nA
nA
nA
300
Full range
350
25°C
VO = VOL
mV
µA
600
25°C
VO = VOH
mV
V
120
Full range
UNIT
200
300
Full range
µA
350
† Full range is – 40°C to 105°C.
switching characteristics, VCC = 5 V, CL = 15 pF, TA = 25°C
PARAMETER
Response time
TLV1393
TEST CONDITIONS
MIN
TYP
100-mV input step with 5-mV overdrive,
RL connected to 5 V through 5.1 kΩ
0.65
TTL-level input step,
RL connected to 5 V through 5.1 kΩ
0.18
MAX
UNIT
µs
electrical characteristics, VCC = 3 V, TA = 25°C
PARAMETER
VIO
Input offset voltage
VICR
Common-mode input voltage range
IIO
IIB
Input offset current
IOH
IOL
High-level output current
ICCH
ICCL
High-level supply current
Input bias current
Low-level output current
Low-level supply current
TEST CONDITIONS
VO = 1.4 V,
TLV1393Y
MIN
TYP
MAX
1.5
5
VIC = VICRmin
0 to
VCC – 1.5
0 to
VCC – 1.2
VO = 1.4 V
VO = 1.4 V
VID = 1 V,
VID = –1 V,
VOH = 3 V
VOL = 1.5 V
UNIT
mV
V
5
50
nA
– 40
–250
nA
0.1
nA
µA
500
VO = VOH
VO = VOL
160
250
160
250
µA
switching characteristics, VCC = 3 V, CL = 15 pF, TA = 25°C
PARAMETER
Response time
8
TEST CONDITIONS
100-mV input step with 5-mV overdrive,
RL connected to 5 V through 5.1 kΩ
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
TLV1393Y
MIN
TYP
0.7
MAX
UNIT
µs
TLV1393, TLV1393Y, TLV2393, TLV2393Y
DUAL DIFFERENTIAL COMPARATORS
SLCS121A – AUGUST 1993 – REVISED APRIL 1994
electrical characteristics, VCC = 5 V, TA = 25°C
PARAMETER
VIO
Input offset voltage
VICR
Common-mode input voltage range
IIO
IIB
Input offset current
IOH
IOL
High-level output current
ICCH
ICCL
High-level supply current
Input bias current
Low-level output current
Low-level supply current
TEST CONDITIONS
VO = 1.4 V,
TLV1393Y
MIN
TYP
MAX
1.5
5
0 to
VCC – 1.5
0 to
VCC – 1.2
VIC = VICRmin
VO = 1.4 V
VO = 1.4 V
VID = 1 V,
VID = –1 V,
VOH = 3 V
VOL = 1.5 V
UNIT
mV
V
5
50
nA
– 40
–250
nA
0.1
nA
µA
600
VO = VOH
VO = VOL
200
300
200
300
µA
switching characteristics, VCC = 5 V, CL = 15 pF, TA = 25°C
PARAMETER
Response time
TEST CONDITIONS
TLV1393Y
MIN
TYP
100-mV input step with 5-mV overdrive,
RL connected to 5 V through 5.1 kΩ
0.65
TTL-level input step,
RL connected to 5 V through 5.1 kΩ
0.18
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
MAX
UNIT
µs
9
TLV1393, TLV1393Y, TLV2393, TLV2393Y
DUAL DIFFERENTIAL COMPARATORS
SLCS121A – AUGUST 1993 – REVISED APRIL 1994
electrical characteristics, VCC = 3 V
PARAMETER
VIO
Input offset voltage
VICR
TA†
TEST CONDITIONS
VO = 1
1.4
4V
V,
VIC = VICRmin
Low level output voltage
Low-level
VID = –1 V,
VID = –1 V,
IOL = 1 mA
IOL = 4 mA
IIO
Input offset current
VO = 1
1.4
4V
IIB
Input bias current
VO = 1
1.4
4V
IOH
High level output current
High-level
VID = 1 V,
VID = 1 V,
VOH = 3 V
VOH = 5 V
IOL
Low-level output current
VID = –1 V,
VOL = 1.5 V
ICCH
High level supply current
High-level
VO = VOH
ICCL
Low level supply current
Low-level
VO = VOL
TYP
MAX
1.5
5
25°C
Full range
9
25°C
0 to
VCC – 1.5
Full range
0 to
VCC – 2
Common mode input voltage range
Common-mode
VOL
TLV2393
MIN
0 to
VCC – 1.2
80
300
Full range
250
700
5
50
Full range
150
25°C
–100
Full range
25°C
25°C
–250
– 400
0.1
Full range
mV
V
25°C
25°C
UNIT
100
4
mV
nA
nA
nA
mA
25°C
450
Full range
600
700
25°C
1.1
Full range
1.3
1.4
µA
mA
† Full range is – 40°C to 105°C.
switching characteristics, VCC = 3 V, CL = 15 pF, TA = 25°C
PARAMETER
Response time
10
TEST CONDITIONS
100-mV input step with 5-mV overdrive,
RL connected to 5 V through 5.1 kΩ
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
TLV2393
MIN
TYP
MAX
0.45
1
UNIT
µs
TLV1393, TLV1393Y, TLV2393, TLV2393Y
DUAL DIFFERENTIAL COMPARATORS
SLCS121A – AUGUST 1993 – REVISED APRIL 1994
electrical characteristics, VCC = 5 V
PARAMETER
VIO
Input offset voltage
VICR
TA†
TEST CONDITIONS
VO = 1
1.4
4V
V,
VIC = VICRmin
Low level output voltage
Low-level
VID = –1 V,
VID = –1 V,
IOL = 1 mA
IOL = 4 mA
IIO
Input offset current
VO = 1
1.4
4V
IIB
Input bias current
VO = 1
1.4
4V
IOH
High level output current
High-level
VID = 1 V,
VID = 1 V,
VOH = 3 V
VOH = 5 V
IOL
Low-level output current
VID = –1 V,
VOL = 1.5 V
ICCH
High level supply current
High-level
VO = VOH
ICCL
Low level supply current
Low-level
VO = VOL
TYP
MAX
1.5
5
25°C
Full range
9
25°C
0 to
VCC – 1.5
Full range
0 to
VCC –2
Common mode input voltage range
Common-mode
VOL
TLV2393
MIN
0 to
VCC – 1.2
70
300
Full range
200
700
5
50
Full range
150
25°C
–100
–250
Full range
– 400
25°C
0.1
Full range
25°C
mV
V
25°C
25°C
UNIT
100
6
mV
nA
nA
nA
mA
25°C
550
700
Full range
800
25°C
1.2
1.5
Full range
1.6
µA
mA
† Full range is – 40°C to 105°C.
switching characteristics, VCC = 5 V, CL = 15 pF, TA = 25°C
PARAMETER
Response time
TEST CONDITIONS
TLV2393
MIN
TYP
MAX
100-mV input step with 5-mV overdrive,
RL connected to 5 V through 5.1 kΩ
0.4
0.8
TTL-level input step,
RL connected to 5 V through 5.1 kΩ
0.15
0.3
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
UNIT
µs
11
TLV1393, TLV1393Y, TLV2393, TLV2393Y
DUAL DIFFERENTIAL COMPARATORS
SLCS121A – AUGUST 1993 – REVISED APRIL 1994
electrical characteristics, VCC = 3 V, TA = 25°C
PARAMETER
VIO
Input offset voltage
TEST CONDITIONS
VO = 1.4 V,
VICR
Common-mode input voltage range
VOL
IIO
Low-level output voltage
IIB
IOH
Input bias current
IOL
ICCH
Low-level output current
High-level supply current
VID = –1 V,
VO = VOH
ICCL
Low-level supply current
VO = VOL
Input offset current
High-level output current
VID = –1 V,
VO = 1.4 V
VO = 1.4 V
VID = 1 V,
TLV2393Y
MIN
TYP
MAX
1.5
5
0 to
VCC – 1.5
0 to
VCC – 1.2
VIC = VICRmin
IOL = 1 mA
VOH = 3 V
VOL = 1.5 V
80
UNIT
mV
V
300
mV
5
50
nA
–100
–250
nA
0.1
nA
4
mA
450
600
µA
1.1
1.3
mA
switching characteristics, VCC = 3 V, CL = 15 pF, TA = 25°C
PARAMETER
Response time
TLV2393Y
TEST CONDITIONS
100-mV input step with 5-mV overdrive,
MIN
RL connected to 5 V through 5.1 kΩ
TYP
MAX
0.45
1
UNIT
µs
electrical characteristics, VCC = 5 V, TA = 25°C
PARAMETER
VIO
Input offset voltage
TEST CONDITIONS
VO = 1.4 V,
VICR
Common-mode input voltage range
VOL
IIO
Low-level output voltage
IIB
IOH
Input bias current
IOL
ICCH
Low-level output current
High-level supply current
VID = –1 V,
VO = VOH
ICCL
Low-level supply current
VO = VOL
Input offset current
High-level output current
VID = –1 V,
VO = 1.4 V
VO = 1.4 V
VID = 1 V,
TLV2393Y
MIN
TYP
MAX
1.5
5
0 to
VCC – 1.5
0 to
VCC – 1.2
VIC = VICRmin
IOL = 1 mA
VOH = 3 V
VOL = 1.5 V
70
UNIT
mV
V
300
mV
5
50
nA
–100
–250
nA
0.1
nA
6
mA
550
700
µA
1.2
1.5
mA
switching characteristics, VCC = 5 V, CL = 15 pF, TA = 25°C
PARAMETER
Response time
12
TEST CONDITIONS
TLV2393Y
MIN
TYP
MAX
100-mV input step with 5-mV overdrive,
RL connected to 5 V through 5.1 kΩ
0.4
0.8
TTL-level input step,
RL connected to 5 V through 5.1 kΩ
0.15
0.3
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
UNIT
µs
TLV1393, TLV1393Y, TLV2393, TLV2393Y
DUAL DIFFERENTIAL COMPARATORS
SLCS121A – AUGUST 1993 – REVISED APRIL 1994
TYPICAL CHARACTERISTICS
Table of Graphs
FIGURE
Input overdrives for TLV1393
Input overdrives for TLV2393
vs Low-to-high-level output response time
1, 3
vs High-to-low-level output response time
2, 4
vs Low-to-high-level output response time
5, 7
vs High-to-low-level output response time
6, 8
VO – Output Voltage – V
3
TLV1393 HIGH- TO LOW-LEVEL OUTPUT
RESPONSE FOR VARIOUS INPUT OVERDRIVES
40 mV
20 mV
10 mV
5 mV
2 mV
0
V ID – Differential
Input Voltage – mV
V ID – Differential
Input Voltage – mV
VO – Output Voltage – V
TLV1393 LOW- TO HIGH-LEVEL OUTPUT
RESPONSE FOR VARIOUS INPUT OVERDRIVES
100
VCC = 3 V
TA = 25° C
0
0
0.5
1
1.5
2
3
40 mV
20 mV
10 mV
5 mV
2 mV
0
VCC = 3 V
TA = 25° C
100
0
2.5
Low- to High-Level Output Response Time – µs
0
0.2
0.4
0.6
0.8
High- to Low-Level Output Response Time – µs
Figure 1
Figure 2
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
13
TLV1393, TLV1393Y, TLV2393, TLV2393Y
DUAL DIFFERENTIAL COMPARATORS
SLCS121A – AUGUST 1993 – REVISED APRIL 1994
TYPICAL CHARACTERISTICS
VO – Output Voltage – V
5
TLV1393 HIGH- TO LOW-LEVEL OUTPUT
RESPONSE FOR VARIOUS INPUT OVERDRIVES
40 mV
20 mV
10 mV
5 mV
2 mV
0
V ID – Differential
Input Voltage – mV
V ID – Differential
Input Voltage – mV
VO – Output Voltage – V
TLV1393 LOW- TO HIGH-LEVEL OUTPUT
RESPONSE FOR VARIOUS INPUT OVERDRIVES
100
VCC = 5 V
TA = 25° C
0
0
0.5
1
1.5
2
5
40 mV
20 mV
10 mV
5 mV
2 mV
0
VCC = 5 V
TA = 25° C
100
0
2.5
0
VO – Output Voltage – V
40 mV
20 mV
10 mV
5 mV
2 mV
0
100
VCC = 3 V
TA = 25° C
0
0.4
0.6
0.8
3
40 mV
20 mV
10 mV
5 mV
2 mV
0
VCC = 3 V
TA = 25° C
100
0
1
Low- to High-Level Output Response Time – µs
0
0.1
Figure 6
POST OFFICE BOX 655303
0.2
0.3
0.4
High- to Low-Level Output Response Time – µs
Figure 5
14
0.8
TLV2393 HIGH- TO LOW-LEVEL OUTPUT
RESPONSE FOR VARIOUS INPUT OVERDRIVES
V ID – Differential
Input Voltage – mV
V ID – Differential
Input Voltage – mV
VO – Output Voltage – V
TLV2393 LOW- TO HIGH-LEVEL OUTPUT
RESPONSE FOR VARIOUS INPUT OVERDRIVES
0.2
0.6
Figure 4
Figure 3
0
0.4
High- to Low-Level Output Response Time – µs
Low- to High-Level Output Response Time – µs
3
0.2
• DALLAS, TEXAS 75265
TLV1393, TLV1393Y, TLV2393, TLV2393Y
DUAL DIFFERENTIAL COMPARATORS
SLCS121A – AUGUST 1993 – REVISED APRIL 1994
TYPICAL CHARACTERISTICS
VO – Output Voltage – V
5
40 mV
20 mV
10 mV
5 mV
2 mV
0
100
VCC = 5 V
TA = 25° C
0
0
TLV2393 HIGH- TO LOW-LEVEL OUTPUT
RESPONSE FOR VARIOUS INPUT OVERDRIVES
V ID – Differential
Input Voltage – mV
V ID – Differential
Input Voltage – mV
VO – Output Voltage – V
TLV2393 LOW- TO HIGH-LEVEL OUTPUT
RESPONSE FOR VARIOUS INPUT OVERDRIVES
0.2
0.4
0.6
0.8
5
40 mV
20 mV
10 mV
5 mV
2 mV
0
VCC = 5 V
TA = 25° C
100
0
1
Low- to High-Level Output Response Time – µs
0
0.1
0.2
0.3
0.4
High- to Low-Level Output Response Time – µs
Figure 7
Figure 8
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
15
PACKAGE OPTION ADDENDUM
www.ti.com
30-Mar-2005
PACKAGING INFORMATION
Orderable Device
Status (1)
Package
Type
Package
Drawing
Pins Package Eco Plan (2)
Qty
TLV1393CD
OBSOLETE
SOIC
D
8
TBD
Call TI
Call TI
TLV1393ID
OBSOLETE
SOIC
D
8
TBD
Call TI
Call TI
TLV1393IDR
OBSOLETE
SOIC
D
8
TBD
Call TI
Call TI
TLV1393IP
OBSOLETE
PDIP
P
8
TBD
Call TI
Call TI
TLV1393IPWLE
OBSOLETE
TSSOP
PW
8
TBD
Call TI
Call TI
TLV1393IPWR
OBSOLETE
TSSOP
PW
8
TBD
Call TI
Call TI
TLV2393ID
OBSOLETE
SOIC
D
8
TBD
Call TI
Call TI
TLV2393IDR
OBSOLETE
SOIC
D
8
TBD
Call TI
Call TI
Lead/Ball Finish
MSL Peak Temp (3)
TLV2393IP
OBSOLETE
PDIP
P
8
TBD
Call TI
Call TI
TLV2393IPWLE
OBSOLETE
TSSOP
PW
8
TBD
Call TI
Call TI
TLV2393IPWR
OBSOLETE
TSSOP
PW
8
TBD
Call TI
Call TI
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS) or Green (RoHS & no Sb/Br) - please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
Addendum-Page 1
MECHANICAL DATA
MPDI001A – JANUARY 1995 – REVISED JUNE 1999
P (R-PDIP-T8)
PLASTIC DUAL-IN-LINE
0.400 (10,60)
0.355 (9,02)
8
5
0.260 (6,60)
0.240 (6,10)
1
4
0.070 (1,78) MAX
0.325 (8,26)
0.300 (7,62)
0.020 (0,51) MIN
0.015 (0,38)
Gage Plane
0.200 (5,08) MAX
Seating Plane
0.010 (0,25) NOM
0.125 (3,18) MIN
0.100 (2,54)
0.021 (0,53)
0.015 (0,38)
0.430 (10,92)
MAX
0.010 (0,25) M
4040082/D 05/98
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. Falls within JEDEC MS-001
For the latest package information, go to http://www.ti.com/sc/docs/package/pkg_info.htm
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
MECHANICAL DATA
MTSS001C – JANUARY 1995 – REVISED FEBRUARY 1999
PW (R-PDSO-G**)
PLASTIC SMALL-OUTLINE PACKAGE
14 PINS SHOWN
0,30
0,19
0,65
14
0,10 M
8
0,15 NOM
4,50
4,30
6,60
6,20
Gage Plane
0,25
1
7
0°– 8°
A
0,75
0,50
Seating Plane
0,15
0,05
1,20 MAX
PINS **
0,10
8
14
16
20
24
28
A MAX
3,10
5,10
5,10
6,60
7,90
9,80
A MIN
2,90
4,90
4,90
6,40
7,70
9,60
DIM
4040064/F 01/97
NOTES: A.
B.
C.
D.
All linear dimensions are in millimeters.
This drawing is subject to change without notice.
Body dimensions do not include mold flash or protrusion not to exceed 0,15.
Falls within JEDEC MO-153
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,
enhancements, improvements, and other changes to its products and services at any time and to discontinue
any product or service without notice. Customers should obtain the latest relevant information before placing
orders and should verify that such information is current and complete. All products are sold subject to TI’s terms
and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI
deems necessary to support this warranty. Except where mandated by government requirements, testing of all
parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for
their products and applications using TI components. To minimize the risks associated with customer products
and applications, customers should provide adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,
copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process
in which TI products or services are used. Information published by TI regarding third-party products or services
does not constitute a license from TI to use such products or services or a warranty or endorsement thereof.
Use of such information may require a license from a third party under the patents or other intellectual property
of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of information in TI data books or data sheets is permissible only if reproduction is without
alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction
of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for
such altered documentation.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that
product or service voids all express and any implied warranties for the associated TI product or service and
is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.
Following are URLs where you can obtain information on other Texas Instruments products and application
solutions:
Products
Applications
Amplifiers
amplifier.ti.com
Audio
www.ti.com/audio
Data Converters
dataconverter.ti.com
Automotive
www.ti.com/automotive
DSP
dsp.ti.com
Broadband
www.ti.com/broadband
Interface
interface.ti.com
Digital Control
www.ti.com/digitalcontrol
Logic
logic.ti.com
Military
www.ti.com/military
Power Mgmt
power.ti.com
Optical Networking
www.ti.com/opticalnetwork
Microcontrollers
microcontroller.ti.com
Security
www.ti.com/security
Low Power Wireless www.ti.com/lpw
Mailing Address:
Telephony
www.ti.com/telephony
Video & Imaging
www.ti.com/video
Wireless
www.ti.com/wireless
Texas Instruments
Post Office Box 655303 Dallas, Texas 75265
Copyright 2006, Texas Instruments Incorporated
