!
" "# $#%&
Data Manual
February 2004
Digital Audio Products
SLES001C
Contents
Section
Title
Page
1
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1−1
1.1
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1−2
1.2
Functional Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1−3
1.3
Terminal Assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1−4
1.4
Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1−5
1.5
Terminal Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1−6
2 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2−1
2.1
Absolute Maximum Ratings Over Operating Free-Air Temperature
Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2−1
2.2
Recommended Operating Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . 2−1
2.3
Electrical Characteristics Over Recommended Operating
Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2−2
2.3.1
DAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2−2
2.3.2
Analog Line Input to Line Output . . . . . . . . . . . . . . . . . . . . . . 2−2
2.3.3
Stereo Headphone Output . . . . . . . . . . . . . . . . . . . . . . . . . . . 2−3
2.3.4
Analog Reference Levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2−3
2.3.5
Digital I/O . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2−3
2.3.6
Supply Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2−3
2.4
Digital-Interface Timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2−4
2.4.1
Audio Interface (Master Mode) . . . . . . . . . . . . . . . . . . . . . . . 2−4
2.4.2
Audio Interface (Slave-Mode) . . . . . . . . . . . . . . . . . . . . . . . . 2−5
2.4.3
Three-Wire Control Interface (SDI) . . . . . . . . . . . . . . . . . . . . 2−6
2.4.4
Two-Wire Control Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . 2−6
3 How to Use the DAC23 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3−1
3.1
Control Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3−1
3.1.1
SPI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3−1
3.1.2
2-Wire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3−1
3.1.3
Register Map . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3−2
3.2
Analog Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3−4
3.2.1
Line Inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3−4
3.2.2
Line Outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3−5
3.2.3
Headphone Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3−5
3.3
Digital Audio Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3−5
3.3.1
Digital Audio-Interface Modes . . . . . . . . . . . . . . . . . . . . . . . . 3−5
3.3.2
Audio Sampling Rates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3−7
3.3.3
Digital Filter Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 3−10
A Mechanical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A−1
iii
List of Illustrations
Figure
2−1
2−2
2−3
2−4
2−5
3−1
3−2
3−3
3−4
3−5
3−6
3−7
3−8
3−9
3−10
3−11
3−12
3−13
3−14
3−15
3−16
3−17
iv
Title
System-Clock Timing Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Master-Mode Timing Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Slave-Mode Timing Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Three-Wire Control Interface Timing Requirements . . . . . . . . . . . . . . . . . .
Two-Wire Control Interface Timing Requirements . . . . . . . . . . . . . . . . . . .
SPI Timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-Wire Compatible Timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Analog Line Input Circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Right Justified Mode Timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Left Justified Mode Timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
I2S Mode Timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DSP Mode Timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Digital De-Emphasis Filter Response − 44.1 kHz Sampling . . . . . . . . . . .
Digital De-Emphasis Filter Response − 48 kHz Sampling . . . . . . . . . . . .
DAC Digital Filter Response 0: USB Mode . . . . . . . . . . . . . . . . . . . . . . . . .
DAC Digital Filter Ripple 0: USB Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DAC Digital Filter Response 1: USB Mode Only . . . . . . . . . . . . . . . . . . . .
DAC Digital Filter Ripple 1: USB Mode Only . . . . . . . . . . . . . . . . . . . . . . . .
DAC Digital Filter Response 2: USB Mode and Normal Modes . . . . . . . .
DAC Digital Filter Ripple 2: USB Mode and Normal Modes . . . . . . . . . . .
DAC Digital Filter Response 3: USB Mode Only . . . . . . . . . . . . . . . . . . . .
DAC Digital Filter Ripple 3: USB Mode Only . . . . . . . . . . . . . . . . . . . . . . . .
Page
2−4
2−4
2−5
2−6
2−6
3−1
3−2
3−5
3−6
3−6
3−6
3−7
3−10
3−11
3−11
3−11
3−12
3−12
3−12
3−13
3−13
3−13
1 Introduction
The TLV320DAC23 is a high performance stereo DAC with highly integrated analog functionality. The DACs within
the TLV320DAC23 are comprised of multibit sigma-delta technology with integrated over-sampling digital
interpolation filters. Supported data transfer word lengths are 16, 20, 24, and 32 bits with sample rates from 8 kHz
to 96 kHz. The DAC sigma-delta modulator features a second order multibit architecture with up to 100 dBA SNR
at audio sample rates up to 96 kHz. This enables high quality digital audio playback capability while consuming less
than 19 mW during playback only. The TLV320DAC23 is the ideal choice for portable digital audio player applications
such as MP3 digital audio players.
Integrated analog features consist of stereo line inputs with an analog bypass path and a stereo headphone amplifier
with analog volume control and mute. The headphone amplifier is capable of delivering 30 mW per channel into 32 Ω.
The analog bypass path allows use of the stereo line inputs and the headphone amplifier with analog volume control
while completely bypassing the DAC, thus enabling further design flexibility such as integrated FM tuners.
While the TLV320DAC23 supports the industry standard over-sample rates of 256 fs and 384 fs, unique over-sample
rates of 250 fs and 272 fs are provided which optimize interface considerations in designs using TI C54x DSPs and
USB data interfaces. A single 12-MHz crystal can be used to supply clocking to the DSP, USB, and DAC. The
TLV320DAC23 features an internal oscillator which, when connected to a 12-MHz external crystal, will provide a
system clock to the DSP and other peripherals at either 12 MHz or 6 MHz using an internal clock buffer and selectable
divider. Audio sample rates of 48 kHz and CD standard rates of 44.1 kHz are directly supported from a 12-MHz master
clock with 250 fs and 272 fs over-sample rates.
Low power consumption and flexible power management allow selective shutdown of DAC functions, thus extending
battery life in portable applications. Couple this design solution with the industry’s smallest package, the TI proprietary
MicroStar Junior using only 25 mm2 of board area, powerful portable stereo audio designs are easily realizable in
a cost effective, space saving total analog solution.
MicroStar Junior is a trademark of Texas Instruments.
1−1
1.1 Features
•
High-Performance Stereo DAC
−
−
−
−
•
Software control via TI McBSP-compatible multiprotocol serial port
−
−
•
2-wire-compatible and SPI-compatible serial port protocols
Glueless interface to TI McBSPs
Audio data input/output via TI McBSP compatible programmable audio interface
−
−
−
−
−
−
I2S-compatible interface
Standard I2S, MSB, or LSB justified data transfers
16/20/24/32-bit word lengths
Audio master/slave timing capability optimized for TI DSPs (250/272 fs)
Industry-standard master/slave support also provided (256/384 fs)
Glueless interface to TI McBSPs
•
Stereo line inputs
•
Stereo line outputs
−
Analog stereo mixer for DAC and analog bypass path
•
Analog volume control with mute
•
Highly efficient linear headphone amplifier
−
•
•
18-mW power consumption during playback mode
Standby power consumption 0.5465 fs
−50
0
Filter Response − dB
−2
−4
−6
−8
−10
0
0.1
0.2
0.3
0.4
0.5
Normalized Audio Sampling Frequency − Hz
Figure 3−8. Digital De-Emphasis Filter Response − 44.1 kHz Sampling
3−10
Hz
±0.03
Passband ripple
dB
dB
0
Filter Response − dB
−2
−4
−6
−8
−10
0
0.10
0.20
0.30
0.40
0.50
Normalized Audio Sampling Frequency − Hz
Figure 3−9. Digital De-Emphasis Filter Response − 48 kHz Sampling
Filter Response − dB
10
−10
−30
−50
−70
−90
0
0.5
1
1.5
2
Normalized Audio Sampling Frequency − Hz
2.5
3
Figure 3−10. DAC Digital Filter Response 0: USB Mode
Filter Response − dB
0.10
0.08
0.06
0.04
0.02
0
−0.02
−0.04
−0.06
−0.08
−0.10
0
0.05
0.1
0.15
0.2
0.25
0.3
0.35
0.4
0.45
0.5
Normalized Audio Sampling Frequency − Hz
Figure 3−11. DAC Digital Filter Ripple 0: USB Mode
3−11
Filter Response − dB
10
−10
−30
−50
−70
−90
0
0.5
1
1.5
2
2.5
3
Normalized Audio Sampling Frequency − Hz
Figure 3−12. DAC Digital Filter Response 1: USB Mode Only
Filter Response − dB
0.10
0.08
0.06
0.04
0.02
0
−0.02
−0.04
−0.06
−0.08
−0.10
0
0.05
0.1
0.15
0.2
0.25
0.3
0.35
0.4
0.45
0.5
Normalized Audio Sampling Frequency − Hz
Figure 3−13. DAC Digital Filter Ripple 1: USB Mode Only
Filter Response − dB
10
−10
−30
−50
−70
−90
0
0.5
1
1.5
2
2.5
Normalized Audio Sampling Frequency − Hz
Figure 3−14. DAC Digital Filter Response 2: USB Mode and Normal Modes
3−12
3
Filter Response − dB
0.4
0.3
0.2
0.1
0
−0.1
−0.2
−0.3
−0.4
0
0.05
0.1
0.15
0.2
0.25
0.3
0.35
0.4
0.45
0.5
Normalized Audio Sampling Frequency − Hz
Figure 3−15. DAC Digital Filter Ripple 2: USB Mode and Normal Modes
Filter Response − dB
10
−10
−30
−50
−70
−90
0
0.5
1
2
1.5
2.5
3
Normalized Audio Sampling Frequency − Hz
Figure 3−16. DAC Digital Filter Response 3: USB Mode Only
Filter Response − dB
0.4
0.3
0.2
0.1
0
−0.1
−0.2
−0.3
−0.4
0
0.05
0.1
0.15
0.2
0.25
0.3
0.35
0.4
0.45
0.5
Normalized Audio Sampling Frequency − Hz
Figure 3−17. DAC Digital Filter Ripple 3: USB Mode Only
3−13
3−14
PACKAGE OPTION ADDENDUM
www.ti.com
20-Mar-2020
PACKAGING INFORMATION
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
MSL Peak Temp
(2)
(6)
(3)
Op Temp (°C)
Device Marking
(4/5)
TLV320DAC23IPW
LIFEBUY
TSSOP
PW
28
50
Green (RoHS
& no Sb/Br)
NIPDAU
Level-1-260C-UNLIM
-40 to 85
320DAC23I
TLV320DAC23IPWG4
LIFEBUY
TSSOP
PW
28
50
Green (RoHS
& no Sb/Br)
NIPDAU
Level-1-260C-UNLIM
-40 to 85
320DAC23I
TLV320DAC23IPWR
LIFEBUY
TSSOP
PW
28
TBD
Call TI
Call TI
-40 to 85
320DAC23I
TLV320DAC23IRHD
LIFEBUY
VQFN
RHD
28
73
Green (RoHS
& no Sb/Br)
NIPDAU
Level-2-260C-1 YEAR
-40 to 85
DAC23I
TLV320DAC23PW
LIFEBUY
TSSOP
PW
28
50
Green (RoHS
& no Sb/Br)
NIPDAU
Level-1-260C-UNLIM
0 to 0
320DAC23
TLV320DAC23PWR
LIFEBUY
TSSOP
PW
28
TBD
Call TI
Call TI
0 to 0
320DAC23
TLV320DAC23RHD
OBSOLETE
VQFN
RHD
28
TBD
Call TI
Call TI
0 to 0
DAC23
TLV320DAC23RHDR
LIFEBUY
VQFN
RHD
28
Green (RoHS
& no Sb/Br)
NIPDAU
Level-2-260C-1 YEAR
0 to 0
DAC23
3000
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance
do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may
reference these types of products as "Pb-Free".
RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption.
Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of
很抱歉,暂时无法提供与“TLV320DAC23PW”相匹配的价格&库存,您可以联系我们找货
免费人工找货