!
" "# $#%&
Data Manual
February 2004
Digital Audio Products
SLES001C
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,
enhancements, improvements, and other changes to its products and services at any time and to discontinue
any product or service without notice. Customers should obtain the latest relevant information before placing
orders and should verify that such information is current and complete. All products are sold subject to TI’s terms
and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI
deems necessary to support this warranty. Except where mandated by government requirements, testing of all
parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for
their products and applications using TI components. To minimize the risks associated with customer products
and applications, customers should provide adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,
copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process
in which TI products or services are used. Information published by TI regarding third-party products or services
does not constitute a license from TI to use such products or services or a warranty or endorsement thereof.
Use of such information may require a license from a third party under the patents or other intellectual property
of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of information in TI data books or data sheets is permissible only if reproduction is without
alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction
of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for
such altered documentation.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that
product or service voids all express and any implied warranties for the associated TI product or service and
is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.
Following are URLs where you can obtain information on other Texas Instruments products and application
solutions:
Products
Applications
Amplifiers
amplifier.ti.com
Audio
www.ti.com/audio
Data Converters
dataconverter.ti.com
Automotive
www.ti.com/automotive
DSP
dsp.ti.com
Broadband
www.ti.com/broadband
Interface
interface.ti.com
Digital Control
www.ti.com/digitalcontrol
Logic
logic.ti.com
Military
www.ti.com/military
Power Mgmt
power.ti.com
Optical Networking
www.ti.com/opticalnetwork
Microcontrollers
microcontroller.ti.com
Security
www.ti.com/security
Telephony
www.ti.com/telephony
Video & Imaging
www.ti.com/video
Wireless
www.ti.com/wireless
Mailing Address:
Texas Instruments
Post Office Box 655303 Dallas, Texas 75265
Copyright 2004, Texas Instruments Incorporated
Contents
Section
Title
Page
1
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1−1
1.1
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1−2
1.2
Functional Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1−3
1.3
Terminal Assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1−4
1.4
Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1−5
1.5
Terminal Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1−6
2 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2−1
2.1
Absolute Maximum Ratings Over Operating Free-Air Temperature
Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2−1
2.2
Recommended Operating Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . 2−1
2.3
Electrical Characteristics Over Recommended Operating
Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2−2
2.3.1
DAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2−2
2.3.2
Analog Line Input to Line Output . . . . . . . . . . . . . . . . . . . . . . 2−2
2.3.3
Stereo Headphone Output . . . . . . . . . . . . . . . . . . . . . . . . . . . 2−3
2.3.4
Analog Reference Levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2−3
2.3.5
Digital I/O . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2−3
2.3.6
Supply Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2−3
2.4
Digital-Interface Timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2−4
2.4.1
Audio Interface (Master Mode) . . . . . . . . . . . . . . . . . . . . . . . 2−4
2.4.2
Audio Interface (Slave-Mode) . . . . . . . . . . . . . . . . . . . . . . . . 2−5
2.4.3
Three-Wire Control Interface (SDI) . . . . . . . . . . . . . . . . . . . . 2−6
2.4.4
Two-Wire Control Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . 2−6
3 How to Use the DAC23 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3−1
3.1
Control Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3−1
3.1.1
SPI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3−1
3.1.2
2-Wire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3−1
3.1.3
Register Map . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3−2
3.2
Analog Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3−4
3.2.1
Line Inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3−4
3.2.2
Line Outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3−5
3.2.3
Headphone Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3−5
3.3
Digital Audio Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3−5
3.3.1
Digital Audio-Interface Modes . . . . . . . . . . . . . . . . . . . . . . . . 3−5
3.3.2
Audio Sampling Rates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3−7
3.3.3
Digital Filter Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 3−10
A Mechanical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A−1
iii
List of Illustrations
Figure
2−1
2−2
2−3
2−4
2−5
3−1
3−2
3−3
3−4
3−5
3−6
3−7
3−8
3−9
3−10
3−11
3−12
3−13
3−14
3−15
3−16
3−17
iv
Title
System-Clock Timing Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Master-Mode Timing Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Slave-Mode Timing Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Three-Wire Control Interface Timing Requirements . . . . . . . . . . . . . . . . . .
Two-Wire Control Interface Timing Requirements . . . . . . . . . . . . . . . . . . .
SPI Timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-Wire Compatible Timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Analog Line Input Circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Right Justified Mode Timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Left Justified Mode Timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
I2S Mode Timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DSP Mode Timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Digital De-Emphasis Filter Response − 44.1 kHz Sampling . . . . . . . . . . .
Digital De-Emphasis Filter Response − 48 kHz Sampling . . . . . . . . . . . .
DAC Digital Filter Response 0: USB Mode . . . . . . . . . . . . . . . . . . . . . . . . .
DAC Digital Filter Ripple 0: USB Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DAC Digital Filter Response 1: USB Mode Only . . . . . . . . . . . . . . . . . . . .
DAC Digital Filter Ripple 1: USB Mode Only . . . . . . . . . . . . . . . . . . . . . . . .
DAC Digital Filter Response 2: USB Mode and Normal Modes . . . . . . . .
DAC Digital Filter Ripple 2: USB Mode and Normal Modes . . . . . . . . . . .
DAC Digital Filter Response 3: USB Mode Only . . . . . . . . . . . . . . . . . . . .
DAC Digital Filter Ripple 3: USB Mode Only . . . . . . . . . . . . . . . . . . . . . . . .
Page
2−4
2−4
2−5
2−6
2−6
3−1
3−2
3−5
3−6
3−6
3−6
3−7
3−10
3−11
3−11
3−11
3−12
3−12
3−12
3−13
3−13
3−13
1 Introduction
The TLV320DAC23 is a high performance stereo DAC with highly integrated analog functionality. The DACs within
the TLV320DAC23 are comprised of multibit sigma-delta technology with integrated over-sampling digital
interpolation filters. Supported data transfer word lengths are 16, 20, 24, and 32 bits with sample rates from 8 kHz
to 96 kHz. The DAC sigma-delta modulator features a second order multibit architecture with up to 100 dBA SNR
at audio sample rates up to 96 kHz. This enables high quality digital audio playback capability while consuming less
than 19 mW during playback only. The TLV320DAC23 is the ideal choice for portable digital audio player applications
such as MP3 digital audio players.
Integrated analog features consist of stereo line inputs with an analog bypass path and a stereo headphone amplifier
with analog volume control and mute. The headphone amplifier is capable of delivering 30 mW per channel into 32 Ω.
The analog bypass path allows use of the stereo line inputs and the headphone amplifier with analog volume control
while completely bypassing the DAC, thus enabling further design flexibility such as integrated FM tuners.
While the TLV320DAC23 supports the industry standard over-sample rates of 256 fs and 384 fs, unique over-sample
rates of 250 fs and 272 fs are provided which optimize interface considerations in designs using TI C54x DSPs and
USB data interfaces. A single 12-MHz crystal can be used to supply clocking to the DSP, USB, and DAC. The
TLV320DAC23 features an internal oscillator which, when connected to a 12-MHz external crystal, will provide a
system clock to the DSP and other peripherals at either 12 MHz or 6 MHz using an internal clock buffer and selectable
divider. Audio sample rates of 48 kHz and CD standard rates of 44.1 kHz are directly supported from a 12-MHz master
clock with 250 fs and 272 fs over-sample rates.
Low power consumption and flexible power management allow selective shutdown of DAC functions, thus extending
battery life in portable applications. Couple this design solution with the industry’s smallest package, the TI proprietary
MicroStar Junior using only 25 mm2 of board area, powerful portable stereo audio designs are easily realizable in
a cost effective, space saving total analog solution.
MicroStar Junior is a trademark of Texas Instruments.
1−1
1.1 Features
•
High-Performance Stereo DAC
−
−
−
−
•
Software control via TI McBSP-compatible multiprotocol serial port
−
−
•
2-wire-compatible and SPI-compatible serial port protocols
Glueless interface to TI McBSPs
Audio data input/output via TI McBSP compatible programmable audio interface
−
−
−
−
−
−
I2S-compatible interface
Standard I2S, MSB, or LSB justified data transfers
16/20/24/32-bit word lengths
Audio master/slave timing capability optimized for TI DSPs (250/272 fs)
Industry-standard master/slave support also provided (256/384 fs)
Glueless interface to TI McBSPs
•
Stereo line inputs
•
Stereo line outputs
−
Analog stereo mixer for DAC and analog bypass path
•
Analog volume control with mute
•
Highly efficient linear headphone amplifier
−
•
•
18-mW power consumption during playback mode
Standby power consumption 0.5465 fs
−50
0
Filter Response − dB
−2
−4
−6
−8
−10
0
0.1
0.2
0.3
0.4
0.5
Normalized Audio Sampling Frequency − Hz
Figure 3−8. Digital De-Emphasis Filter Response − 44.1 kHz Sampling
3−10
Hz
±0.03
Passband ripple
dB
dB
0
Filter Response − dB
−2
−4
−6
−8
−10
0
0.10
0.20
0.30
0.40
0.50
Normalized Audio Sampling Frequency − Hz
Figure 3−9. Digital De-Emphasis Filter Response − 48 kHz Sampling
Filter Response − dB
10
−10
−30
−50
−70
−90
0
0.5
1
1.5
2
Normalized Audio Sampling Frequency − Hz
2.5
3
Figure 3−10. DAC Digital Filter Response 0: USB Mode
Filter Response − dB
0.10
0.08
0.06
0.04
0.02
0
−0.02
−0.04
−0.06
−0.08
−0.10
0
0.05
0.1
0.15
0.2
0.25
0.3
0.35
0.4
0.45
0.5
Normalized Audio Sampling Frequency − Hz
Figure 3−11. DAC Digital Filter Ripple 0: USB Mode
3−11
Filter Response − dB
10
−10
−30
−50
−70
−90
0
0.5
1
1.5
2
2.5
3
Normalized Audio Sampling Frequency − Hz
Figure 3−12. DAC Digital Filter Response 1: USB Mode Only
Filter Response − dB
0.10
0.08
0.06
0.04
0.02
0
−0.02
−0.04
−0.06
−0.08
−0.10
0
0.05
0.1
0.15
0.2
0.25
0.3
0.35
0.4
0.45
0.5
Normalized Audio Sampling Frequency − Hz
Figure 3−13. DAC Digital Filter Ripple 1: USB Mode Only
Filter Response − dB
10
−10
−30
−50
−70
−90
0
0.5
1
1.5
2
2.5
Normalized Audio Sampling Frequency − Hz
Figure 3−14. DAC Digital Filter Response 2: USB Mode and Normal Modes
3−12
3
Filter Response − dB
0.4
0.3
0.2
0.1
0
−0.1
−0.2
−0.3
−0.4
0
0.05
0.1
0.15
0.2
0.25
0.3
0.35
0.4
0.45
0.5
Normalized Audio Sampling Frequency − Hz
Figure 3−15. DAC Digital Filter Ripple 2: USB Mode and Normal Modes
Filter Response − dB
10
−10
−30
−50
−70
−90
0
0.5
1
2
1.5
2.5
3
Normalized Audio Sampling Frequency − Hz
Figure 3−16. DAC Digital Filter Response 3: USB Mode Only
Filter Response − dB
0.4
0.3
0.2
0.1
0
−0.1
−0.2
−0.3
−0.4
0
0.05
0.1
0.15
0.2
0.25
0.3
0.35
0.4
0.45
0.5
Normalized Audio Sampling Frequency − Hz
Figure 3−17. DAC Digital Filter Ripple 3: USB Mode Only
3−13
3−14
Appendix A
Mechanical Data
GQE (S-PBGA-N80)
PLASTIC BALL GRID ARRAY
5,10
SQ
4,90
4,00 TYP
0,50
J
0,50
H
G
F
E
D
C
B
A
1
0,68
0,62
2
3
4
5
6
7
8
9
1,00 MAX
Seating Plane
0,35
0,25
NOTES: A.
B.
C.
D.
∅ 0,05 M
0,21
0,11
0,08
4200461/C 10/00
All linear dimensions are in millimeters.
This drawing is subject to change without notice.
MicroStar Junior BGA configuration
Falls within JEDEC MO-225
MicroStar Junior is a trademark of Texas Instruments.
A−1
PW (R-PDSO-G**)
PLASTIC SMALL-OUTLINE PACKAGE
14 PINS SHOWN
0,30
0,19
0,65
14
0,10 M
8
0,15 NOM
4,50
4,30
6,60
6,20
Gage Plane
0,25
1
7
0°−ā 8°
A
0,75
0,50
Seating Plane
0,15
0,05
1,20 MAX
PINS **
0,10
8
14
16
20
24
28
A MAX
3,10
5,10
5,10
6,60
7,90
9,80
A MIN
2,90
4,90
4,90
6,40
7,70
9,60
DIM
4040064/F 01/97
NOTES: A.
B.
C.
D.
A−2
All linear dimensions are in millimeters.
This drawing is subject to change without notice.
Body dimensions do not include mold flash or protrusion not to exceed 0,15.
Falls within JEDEC MO-153
RHD (S−PQFP−N28)
PLASTIC QUAD FLATPACK
5,00
A
B
ÉÉÉÉ
ÉÉÉÉ
ÉÉÉÉ
ÉÉÉÉ
ÉÉÉÉ
5,00
28
1
PIN 1
INDEX AREA
1,00
0,80
0,20 REF
C
SEATING PLANE
0,08 C
0,05 MAX
3,25
SQ
3,00
PIN 1
IDENTIFIER
1
0,65
28 0,45
0,435
28
0,18
0,435
4 3,00
0,18
0,50
EXPOSED THERMAL
DIE PAD
D
28
0,30
0,18
0,10 M C A B
4204400/A 05/02
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice.
C. QFN (Quad Flatpack No−Lead) Package configuration.
A−3
D. The Package thermal performance may be enhanced by bonding the thermal die pad to
an external thermal plane. This pad is electrically and thermally connected to the backside
of the die and possibly selected ground leads.
E. Package complies to JEDEC MO-220.
A−4