Order
Now
Product
Folder
Support &
Community
Tools &
Software
Technical
Documents
TLV6703
SBOS865B – JANUARY 2018 – REVISED NOVEMBER 2019
TLV6703 Micropower, 18-V Comparator With Integrated Reference
1 Features
3 Description
•
•
•
The TLV6703 high voltage comparator operates over
a 1.8-V to 18-V range. The TLV6703 has a highaccuracy comparator with an internal 400-mV
reference and an open-drain output rated to 18 V for
precision voltage detection. The monitored voltage
can be set with the use of external resistors.
1
•
•
•
•
•
•
Wide supply voltage range: 1.8 V to 18 V
Adjustable threshold: down to 400 mV
High threshold accuracy:
– 0.5% Max at 25°C
– 1.0% Max over temperature
Low quiescent current: 5.5 µA (Typ)
Open-drain output
Internal hysteresis: 5.5 mV (Typ)
Temperature range: –40°C to +125°C
Package: thin SOT-23-6
WSON-6
The OUT pin is driven low when the voltage at the
SENSE pin drops below (VIT–), and goes high when
the voltage returns above the respective threshold
(VIT+). The comparator in the TLV6703 includes builtin hysteresis for filtering to reject brief glitches,
thereby ensuring stable output operation without false
triggering.
The TLV6703 is available in a Thin SOT-23-6
package and a leadless WSON-6; all package
variants are specified over the junction temperature
range of –40°C to +125°C.
2 Applications
•
•
•
•
•
•
•
•
Notebook PCs and tablets
Smartphones
Digital cameras
Video game controllers
Relays and circuit breakers
Portable medical devices
Door and window sensors
Portable- and battery-powered products
Device Information
PART NUMBER
TLV6703
PACKAGE
(1)
BODY SIZE (NOM)
SOT-23 (6)
2.90 mm × 1.60 mm
WSON (6)
1.50 mm × 1.50 mm
(1) For all available packages, see the package option addendum
at the end of the datasheet.
Simplified Block Diagram
VMON
0.01 F
VPULLUP
Up to 18 V
VDD
R1
RP
SENSE
OUT
R2
VIT
+
GND
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.
TLV6703
SBOS865B – JANUARY 2018 – REVISED NOVEMBER 2019
www.ti.com
Table of Contents
1
2
3
4
5
6
7
8
Features ..................................................................
Applications ...........................................................
Description .............................................................
Revision History.....................................................
Device Comparison Table.....................................
Pin Configuration and Functions .........................
Specifications.........................................................
1
1
1
2
2
3
4
7.1
7.2
7.3
7.4
7.5
7.6
7.7
7.8
4
4
4
4
5
6
6
7
Absolute Maximum Ratings ......................................
ESD Ratings..............................................................
Recommended Operating Conditions.......................
Thermal Information ..................................................
Electrical Characteristics...........................................
Timing Requirements ................................................
Switching Characteristics ..........................................
Typical Characteristics ..............................................
Detailed Description .............................................. 9
8.1 Overview ................................................................... 9
8.2 Functional Block Diagram ......................................... 9
8.3 Feature Description................................................. 10
8.4 Device Functional Modes........................................ 10
9
Application and Implementation ........................ 11
9.1 Application Information............................................ 11
9.2 Typical Application .................................................. 13
9.3 Dos and Don'ts........................................................ 14
10 Power-Supply Recommendations ..................... 15
11 Layout................................................................... 15
11.1 Layout Guidelines ................................................. 15
11.2 Layout Example .................................................... 15
12 Device and Documentation Support ................. 16
12.1
12.2
12.3
12.4
12.5
12.6
Device Support......................................................
Receiving Notification of Documentation Updates
Community Resources..........................................
Trademarks ...........................................................
Electrostatic Discharge Caution ............................
Glossary ................................................................
16
16
16
16
16
16
13 Mechanical, Packaging, and Orderable
Information ........................................................... 16
4 Revision History
Changes from Revision A (April 2018) to Revision B
•
Page
Added WSON-6 package ....................................................................................................................................................... 1
Changes from Original (Jan 2018) to Revision A
•
Page
Changed Advance Information to Production Data ............................................................................................................... 1
5 Device Comparison Table
Table 1. TLV67xx Integrated Comparator Family
2
PART NUMBER
CONFIGURATION
OPERATING
VOLTAGE RANGE
THRESHOLD ACCURACY OVER
TEMPERATURE
TLV6700
Window
1.8 V to 18 V
1%
TLV6703
Non-Inverting Single Channel
1.8 V to 18 V
1%
TLV6710
Window
1.8 V to 36 V
0.75%
TLV6713
Non-Inverting Single Channel
1.8 V to 36 V
0.75%
Submit Documentation Feedback
Copyright © 2018–2019, Texas Instruments Incorporated
Product Folder Links: TLV6703
TLV6703
www.ti.com
SBOS865B – JANUARY 2018 – REVISED NOVEMBER 2019
6 Pin Configuration and Functions
DDC Package
SOT-23-6
Top View
OUT
1
6
GND
GND
2
5
VDD
SENSE
3
4
GND
DSE Package
WSON-6
Top View
GND
1
6 OUT
VDD
2
5 GND
GND
3
4 SENSE
Pin Functions
PIN
NAME
I/O
DESCRIPTION
DDC
DSE
GND
2, 4, 6
1, 3, 5
—
Connect all three pins to ground.
OUT
1
6
O
SENSE comparator has an open-drain output. OUT is driven low when SENSE is below
(VIT-). OUT goes high when SENSE returns above the respective threshold (VIT+).
SENSE
3
4
I
This pin is connected to the voltage to be monitored with the use of an external resistor
divider. When the voltage at this pin drops below the threshold voltage (VIT-), OUT is
driven low.
VDD
5
2
I
Supply voltage input. Connect a 1.8-V to 18-V supply to VDD to power the device. Good
analog design practice is to place a 0.1-µF ceramic capacitor close to this pin.
Submit Documentation Feedback
Copyright © 2018–2019, Texas Instruments Incorporated
Product Folder Links: TLV6703
3
TLV6703
SBOS865B – JANUARY 2018 – REVISED NOVEMBER 2019
www.ti.com
7 Specifications
7.1 Absolute Maximum Ratings
over operating temperature range (unless otherwise noted) (1)
Voltage (2)
Current
(2)
MAX
–0.3
20
OUT
–0.3
20
SENSE
–0.3
7
OUT (output sink current)
Temperature
(1)
MIN
VDD
UNIT
V
40
mA
Operating junction, TJ
–40
125
Storage, Tstg
–65
150
°C
Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended
Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
All voltages are with respect to network ground pin.
7.2 ESD Ratings
VALUE
V(ESD)
(1)
(2)
Human body model (HBM), per ANSI/ESDA/JEDEC JS-001, all pins
Electrostatic discharge
(1)
±2500
Charged device model (CDM), per JEDEC specification JESD22-C101, all pins
(2)
±1000
UNIT
V
JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.
JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.
7.3 Recommended Operating Conditions
over operating temperature range (unless otherwise noted)
MIN
VDD
Supply voltage
VI
Input voltage
VO
Output voltage
NOM
MAX
UNIT
1.8
18
V
SENSE
0
6.5
V
OUT
0
18
V
7.4 Thermal Information
TLV6703
THERMAL METRIC (1)
DDC
(SOT)
DSE
(WSON)
6 PINS
6 PINS
UNIT
RθJA
Junction-to-ambient thermal resistance
204.6
194.9
°C/W
RθJC(top)
Junction-to-case (top) thermal resistance
50.5
128.9
°C/W
RθJB
Junction-to-board thermal resistance
54.3
153.8
°C/W
ψJT
Junction-to-top characterization parameter
0.8
11.9
°C/W
ψJB
Junction-to-board characterization parameter
52.8
157.4
°C/W
RθJC(bot)
Junction-to-case (bottom) thermal resistance
N/A
N/A
°C/W
(1)
4
For more information about traditional and new thermal metrics, see the Semiconductor an IC Package Thermal Metrics application
report.
Submit Documentation Feedback
Copyright © 2018–2019, Texas Instruments Incorporated
Product Folder Links: TLV6703
TLV6703
www.ti.com
SBOS865B – JANUARY 2018 – REVISED NOVEMBER 2019
7.5 Electrical Characteristics
Over the operating temperature range of TJ = –40°C to +125°C, and 1.8 V < VDD < 18 V (unless otherwise noted).
Typical values are at TJ = 25°C and VDD = 5 V.
PARAMETER
TEST CONDITIONS
(1)
V(POR)
Power-on reset voltage
VIT+
Positive-going input threshold voltage
VIT–
Negative-going input threshold voltage
Vhys
Hysteresis voltage (hys = VIT+ – VIT–)
I(SENSE)
Input current (at the SENSE pin)
VOL
Low-level output voltage
Ilkg(OD)
Open-drain output leakage-current
MIN
VDD = 1.8V and 18 V, TJ = 25°C
398
VDD = 1.8V and 18 V, TJ = –40°C to 125°C
396
VDD = 1.8V and 18 V, TJ = 25°C
Supply current
UVLO
Undervoltage lockout
391.6
VDD = 1.8V and 18 V, TJ = –40°C to 125°C
387
VDD = 1.8 V and 18 V, VI = 6.5 V
–25
(1)
(2)
400
402.5
404
394.5
397.5
400
mV
mV
12
mV
25
nA
VDD = 1.8 V, output sink current = 3 mA
250
VDD = 5 V, output sink current = 5 mA
250
VDD = 1.8 V and 18 V, VO = VDD
300
VDD = 1.8 V, VO = 18 V
300
5.5
11
VDD = 5 V
6
13
VDD = 12 V
6
13
7
1.3
V
1
250
VDD falling
UNIT
5.5
VDD = 1.3 V, output sink current = 0.4 mA
VDD = 18 V
(2)
MAX
0.8
VDD = 1.8 V, no load
IDD
TYP
VOLmax = 0.2 V, output sink current = 15 µA
mV
nA
µA
13
1.7
V
The lowest supply voltage (VDD) at which output is active; tr(VDD) > 15 µs/V. Below V(POR), the output cannot be determined.
When VDD falls below UVLO, OUT is driven low. The output cannot be determined below V(POR).
Submit Documentation Feedback
Copyright © 2018–2019, Texas Instruments Incorporated
Product Folder Links: TLV6703
5
TLV6703
SBOS865B – JANUARY 2018 – REVISED NOVEMBER 2019
www.ti.com
7.6 Timing Requirements
over operating temperature range (unless otherwise noted)
MIN
NOM
MAX
UNIT
tpd(HL)
High-to-low propagation delay
(1)
VDD = 5 V, 10-mV input overdrive,
RP = 10 kΩ, VOH = 0.9 × VDD, VOL = 400 mV,
see Figure 1
18
µs
tpd(LH)
Low-to-high propagation delay
(1)
VDD = 5 V, 10-mV input overdrive,
RP = 10 kΩ, VOH = 0.9 × VDD, VOL = 400 mV,
see Figure 1
29
µs
td(start)
Start-up delay
150
µs
(1)
(2)
(2)
High-to-low and low-to-high refers to the transition at the input pin (SENSE).
During power on, VDD must exceed 1.8 V for at least 150 µs before the output is in a correct state.
7.7 Switching Characteristics
over operating temperature range (unless otherwise noted)
PARAMETER
TEST CONDITIONS
tr
Output rise time
VDD = 5 V, 10-mV input overdrive,
RP = 10 kΩ, VO = (0.1 to 0.9) × VDD
tf
Output fall time
VDD = 5 V, 10-mV input overdrive,
RP = 10 kΩ, VO = (0.1 to 0.9) × VDD
MIN
TYP
MAX
UNIT
2.2
µs
0.22
µs
VDD
V(POR)
VIT+
SENSE
V HYS
VIT±
OUT
t pd(LH)
t pd(HL)
t pd(LH)
t d(start)
Figure 1. Timing Diagram
6
Submit Documentation Feedback
Copyright © 2018–2019, Texas Instruments Incorporated
Product Folder Links: TLV6703
TLV6703
www.ti.com
SBOS865B – JANUARY 2018 – REVISED NOVEMBER 2019
7.8 Typical Characteristics
at TJ = 25°C and VDD = 5 V (unless otherwise noted)
401
9
Supply Current (PA)
8
7
6
5
4
3
TJ = -40°C
TJ = 0°C
TJ = +25°C
TJ = +85°C
TJ = +125°C
2
1
Positive-Going Input Threshold (mV)
10
400.6
400.2
399.8
399.4
399
-40
0
0
2
4
6
8
10
12
Supply Voltage (V)
14
16
18
Figure 2. Supply Current (IDD) vs Supply Voltage (VDD)
6
5
VDD = 1.8 V
VDD = 5 V
VDD = 12 V
VDD = 18 V
-25
-10
5
20 35 50 65
Temperature (qC)
80
95
Low-to-High Propagation Delay (µs)
Hysteresis Voltage (mV)
7
4
5
20 35 50 65
Temperature (qC)
80
95
110 125
21
19
17
15
13
11
9
-40
110 125
28
14
Input Pulse Duration (µs)
16
24
22
20
18
16
VDD = 1.8 V
VDD = 18 V
-25
-10
5
20 35 50 65
Temperature (qC)
80
95
110 125
-25
-10
5
20 35 50 65
Temperature (qC)
80
95
110 125
Figure 5. Propagation Delay vs Temperature
(High-to-Low Transition at Sense)
30
26
VDD = 1.8 V
VDD = 18 V
23
Figure 4. Hysteresis (Vhys) vs Temperature
Low-to-High Propagation Delay (µs)
-10
25
8
14
-40
-25
Figure 3. Rising Input Threshold Voltage (VIT+) vs
Temperature
9
3
-40
VDD = 1.8 V
VDD = 5 V
VDD = 12 V
VDD = 18 V
12
10
8
6
4
2
0
2.5
4
5.5
7
8.5
10
11.5
13
Positive-Going Input Threshold Overdrive (%)
14.5
SENSE = negative spike below VIT–
Figure 6. Propagation Delay vs Temperature
(Low-to-High Transition at Sense)
Figure 7. Minimum Pulse Width vs
Threshold Overdrive Voltage
Submit Documentation Feedback
Copyright © 2018–2019, Texas Instruments Incorporated
Product Folder Links: TLV6703
7
TLV6703
SBOS865B – JANUARY 2018 – REVISED NOVEMBER 2019
www.ti.com
Typical Characteristics (continued)
at TJ = 25°C and VDD = 5 V (unless otherwise noted)
2000
12
VDD = 1.8 V
VDD = 5 V
VDD = 18 V
Low-Level Output Voltage (mV)
1800
Supply Current (PA)
10
8
6
4
TJ = -40°C
TJ = 0°C
TJ = +25°C
TJ = +85°C
TJ = +125°C
2
4
8
12
16
20
24
28
Output Sink Current (mA)
32
36
1400
1200
1000
800
600
400
200
0
0
0
1600
0
40
2000
32
36
40
1600
36
40
36
40
VDD = 1.8 V
VDD = 5 V
VDD = 18 V
1800
Low-Level Output Voltage (mV)
Low-Level Output Voltage (mV)
12
16
20
24
28
Output Sink Current (mA)
2000
VDD = 1.8 V
VDD = 5 V
VDD = 18 V
1800
1400
1200
1000
800
600
400
200
1600
1400
1200
1000
800
600
400
200
0
0
0
4
8
12
16
20
24
28
Output Sink Current (mA)
32
36
40
0
Figure 10. Output Voltage Low (VOL) vs
Output Sink Current (0°C)
4
8
12
16
20
24
28
Output Sink Current (mA)
32
Figure 11. Output Voltage Low (VOL) vs
Output Sink Current (25°C)
2000
2000
VDD = 1.8 V
VDD = 5 V
VDD = 18 V
1600
VDD = 1.8 V
VDD = 5 V
VDD = 18 V
1800
Low-Level Output Voltage (mV)
1800
Low-Level Output Voltage (mV)
8
Figure 9. Output Voltage Low (VOL) vs
Output Sink Current (–40°C)
Figure 8. Supply Current (IDD) vs
Output Sink Current
1400
1200
1000
800
600
400
200
1600
1400
1200
1000
800
600
400
200
0
0
0
4
8
12
16
20
24
28
Output Sink Current (mA)
32
36
40
0
Figure 12. Output Voltage Low (VOL) vs
Output Sink Current (85°C)
8
4
Submit Documentation Feedback
4
8
12
16
20
24
28
Output Sink Current (mA)
32
Figure 13. Output Voltage Low (VOL) vs
Output Sink Current (125°C)
Copyright © 2018–2019, Texas Instruments Incorporated
Product Folder Links: TLV6703
TLV6703
www.ti.com
SBOS865B – JANUARY 2018 – REVISED NOVEMBER 2019
8 Detailed Description
8.1 Overview
The TLV6703 provides precision voltage detection. The TLV6703 is a wide-supply voltage range (1.8 V to 18 V)
comparator with a high-accuracy rising input threshold of 400 mV (1% over temperature) and built-in hysteresis.
The output is also rated to 18 V, independant of supply voltage, and can sink up to 40 mA.
The TLV6703 asserts the output signal, as shown in Table 2. To monitor any voltage above 0.4 V, set the input
using an external resistor divider network. Each input pin has very low input leakage current, allowing the use of
large resistor dividers without sacrificing system accuracy. Broad voltage thresholds are supported that enable
the device for use in a wide array of applications.
Table 2. TLV6703 Truth Table
CONDITION
OUTPUT
SENSE > VIT+
OUT high
Output high impedance
OUTPUT STATE
SENSE < VIT–
OUT low
Output sinking
8.2 Functional Block Diagram
VDD
SENSE
OUT
VIT+
GND
Submit Documentation Feedback
Copyright © 2018–2019, Texas Instruments Incorporated
Product Folder Links: TLV6703
9
TLV6703
SBOS865B – JANUARY 2018 – REVISED NOVEMBER 2019
www.ti.com
8.3 Feature Description
8.3.1 Input Pin (SENSE)
The TLV6703 comparator has two inputs: one external input, and one input internally connected to the internal
400mV reference. The comparator rising threshold is trimmed to be equal to the reference voltage (400 mV). The
comparator also has a built-in falling hysteresis that makes the device less sensitive to supply-rail noise and
provides stable operation.
The comparator input (SENSE) is able to swing from ground to 6.5 V, regardless of the device supply voltage.
Although not required in most cases, to reduce sensitivity to transients and layout parasitics for extremely noisy
applications, place a 1-nF to 10-nF bypass capacitor at the comparator input.
OUT is driven to logic low when the input SENSE voltage drops below (VIT-). When the voltage exceeds VIT+, the
output (OUT) goes to a high-impedance state; see Figure 1.
8.3.2 Output Pin (OUT)
In a typical TLV6703 application, the output is connected to a GPIO input of the processor (such as a digital
signal processor [DSP], central processing unit [CPU], field-programmable gate array [FPGA], or applicationspecific integrated circuit [ASIC]).
The TLV6703 device provides an open-drain output (OUT). Use a pullup resistor to hold this line high when the
output goes to high impedance (not asserted). To connect the output to another device at the correct interfacevoltage level, connect a pullup resistor to the proper voltage rail. The TLV6703 output can be pulled up to 18 V,
independent of the device supply voltage.
Table 2 and the Input Pin (SENSE) section describe how the output is asserted or de-asserted. See Figure 1 for
a timing diagram that describes the relationship between threshold voltage and the respective output.
8.3.3 Immunity to Input-Pin Voltage Transients
The TLV6703 is relatively immune to short voltage transient spikes on the sense pin. Sensitivity to transients
depends on both transient duration and amplitude; see Figure 7, Minimum Pulse Width vs Threshold Overdrive
Voltage.
8.4 Device Functional Modes
8.4.1 Normal Operation (VDD > UVLO)
When the voltage on VDD is greater than 1.8 V for at least 150 µs, the OUT signal correspond to the voltage on
SENSE as listed in Table 2.
8.4.2 Undervoltage Lockout (V(POR) < VDD < UVLO)
When the voltage on VDD is less than the device UVLO voltage, and greater than the power-on reset voltage,
V(POR), the OUT signal is asserted regardless of the voltage on SENSE.
8.4.3
Power-On Reset (VDD < V(POR))
When the voltage on VDD is lower than the required voltage to internally pull the asserted output to GND (V(POR)),
SENSE is in a high-impedance state.
10
Submit Documentation Feedback
Copyright © 2018–2019, Texas Instruments Incorporated
Product Folder Links: TLV6703
TLV6703
www.ti.com
SBOS865B – JANUARY 2018 – REVISED NOVEMBER 2019
9 Application and Implementation
NOTE
Information in the following applications sections is not part of the TI component
specification, and TI does not warrant its accuracy or completeness. TI’s customers are
responsible for determining suitability of components for their purposes. Customers should
validate and test their design implementation to confirm system functionality.
9.1 Application Information
The TLV6703 device is a wide-supply voltage comparator that operates over a VDD range of 1.8 V to
18 V. The device has a high-accuracy comparator with an internal 400-mV reference and an open-drain output
rated to 18 V for precision voltage detection. The device can be used as a voltage monitor. The monitored
voltage are set with the use of external resistors.
9.1.1 VPULLUP to a Voltage Other Than VDD
The output is often tied to VDD through a resistor. However, some applications may require the output to be
pulled up to a higher or lower voltage than VDD to correctly interface with the reset and enable pins of other
devices.
VMON
1.8 V to 18 V
0.01 F
VPULLUP
Up to 18 V
R1
VDD
RP
SENSE
OUT
To a reset or enable
input of the system.
R2
GND
Figure 14. Interfacing to a Voltage Other Than VDD
Submit Documentation Feedback
Copyright © 2018–2019, Texas Instruments Incorporated
Product Folder Links: TLV6703
11
TLV6703
SBOS865B – JANUARY 2018 – REVISED NOVEMBER 2019
www.ti.com
Application Information (continued)
9.1.2 Monitoring VDD
Many applications monitor the same rail that is powering VDD. In these applications the resistor divider is simply
connected to the VDD rail.
1.8 V to 18 V
0.01 F
VPULLUP
Up to 18 V
R1
VDD
RP
SENSE
To a reset or enable
input of the system.
OUT
R2
GND
Figure 15. Monitoring the Same Voltage as VDD
9.1.3 Monitoring a Voltage Other Than VDD
Some applications monitor rails other than the one that is powering VDD. In these types of applications the
resistor divider used to set the desired threshold is connected to the rail that is being monitored.
VMON
1.8 V to 18 V
0.01 F
VPULLUP
Up to 18 V
R1
VDD
RP
SENSE
OUT
To a reset or enable
input of the system.
R2
GND
NOTE: The input can monitor a voltage greater than maximum VDD with the use of an external resistor divider
network.
Figure 16. Monitoring a Voltage Other Than VDD
12
Submit Documentation Feedback
Copyright © 2018–2019, Texas Instruments Incorporated
Product Folder Links: TLV6703
TLV6703
www.ti.com
SBOS865B – JANUARY 2018 – REVISED NOVEMBER 2019
9.2 Typical Application
The TLV6703 device is a wide-supply voltage comparator that operates over a VDD range of 1.8 to 18 V. The
monitored voltage is set with the use of external resistors, so the device can be used either as a precision
voltage monitor.
VMON
1.8 V to 18 V
0.01 F
VPULLUP
Up to 18 V
R1
2.21 MŸ
VDD
SENSE
OUT
RP
49.9 kŸ
To a reset or enable
input of the system.
R2
83.5 kŸ
GND
Figure 17. Wide VIN Voltage Monitor
9.2.1 Design Requirements
For this design example, use the values summarized in Table 3 as the input parameters.
Table 3. Design Parameters
PARAMETER
DESIGN REQUIREMENT
DESIGN RESULT
Monitored voltage
12-V nominal rail with maximum falling
threshold of 10%
VMON(UV)= 10.99 V (8.33%)
9.2.2 Detailed Design Procedure
9.2.2.1 Resistor Divider Selection
The resistor divider values and target threshold voltage can be calculated by using Equation 1 to determine
VMON(UV).
R1 ·
§
VMON(UV) = ¨ 1 +
¸ × VIT
R2
©
¹
(1)
where
•
•
R1 and R2 are the resistor values for the resistor divider on the SENSEx pins
VMON(UV) is the target voltage at which an undervoltage condition is detected
Choose RTOTAL ( = R1 + R2) so that the current through the divider is approximately 100 times higher than the
input current at the SENSE pin. The resistors can have high values to minimize current consumption as a result
of low input bias current without adding significant error to the resistive divider. For details on sizing input
resistors, refer to application report SLVA450, Optimizing Resistor Dividers at a Comparator Input, available for
download from www.ti.com.
Submit Documentation Feedback
Copyright © 2018–2019, Texas Instruments Incorporated
Product Folder Links: TLV6703
13
TLV6703
SBOS865B – JANUARY 2018 – REVISED NOVEMBER 2019
www.ti.com
9.2.2.2 Pullup Resistor Selection
To ensure the proper voltage level, the pullup resistor value is selected by ensuring that the pullup voltage
divided by the resistor does not exceed the sink-current capability of the device. This confirmation is calculated
by verifying that the pullup voltage minus the output-leakage current (Ilkg(OD)) multiplied by the resistor is greater
than the desired logic-high voltage. These values are specified in the Electrical Characteristics .
Use Equation 2 to calculate the value of the pullup resistor.
VPU
(VHI - VPU)
³ RPU ³
IO
Ilkg(OD)
(2)
9.2.2.3 Input Supply Capacitor
Although an input capacitor is not required for stability, for good analog design practice, connect a 0.1-μF low
equivalent series resistance (ESR) capacitor across the VDD and GND pins. A higher-value capacitor may be
necessary if large, fast rise-time load transients are anticipated, or if the device is not located close to the power
source.
9.2.2.4 Sense Capacitor
Although not required in most cases, for extremely noisy applications, place a 1-nF to 10-nF bypass capacitor
from the comparator input (SENSE) to the GND pin for good analog design practice. This capacitor placement
reduces device sensitivity to transients.
9.2.3 Application Curves
Positive-Going Input Threshold (mV)
401
VDD = 1.8 V
VDD = 5 V
VDD = 12 V
VDD = 18 V
400.6
400.2
399.8
399.4
399
-40
-25
-10
5
20 35 50 65
Temperature (qC)
80
95
110 125
Figure 18. Rising Input Threshold Voltage (VIT+) vs Temperature
9.3 Dos and Don'ts
Do connect a 0.1-µF decoupling capacitor from VDD to GND for best system performance.
If the monitored rail is noisy, do connect a decoupling capacitor from the comparator input (sense) to GND.
Don't use resistors for the voltage divider that cause the current through them to be less than 100 times the input
current of the comparator without also accounting for the effect to the accuracy.
Don't use a pullup resistor that is too small, because the larger current sunk by the output then exceeds the
desired low-level output voltage (VOL).
14
Submit Documentation Feedback
Copyright © 2018–2019, Texas Instruments Incorporated
Product Folder Links: TLV6703
TLV6703
www.ti.com
SBOS865B – JANUARY 2018 – REVISED NOVEMBER 2019
10 Power-Supply Recommendations
These devices operate from an input voltage supply range between 1.8 V and 18 V.
11 Layout
11.1 Layout Guidelines
Placing a 0.1-µF capacitor close to the VDD pin to reduce the input impedance to the device is good analog
design practice.
11.2 Layout Example
Pullup
Voltage
RP1
Output
Flag
Monitored
Voltage
R1
1
6
2
5
3
4
CVDD
Input
Supply
R2
Figure 19. Layout Example
Submit Documentation Feedback
Copyright © 2018–2019, Texas Instruments Incorporated
Product Folder Links: TLV6703
15
TLV6703
SBOS865B – JANUARY 2018 – REVISED NOVEMBER 2019
www.ti.com
12 Device and Documentation Support
12.1 Device Support
12.1.1 Development Support
The DIP Adapter Evaluation Module allows conversion of the SOT-23-6 package to a standard DIP-6 pinout for
ease of protoyping and bench evaluation.
12.2 Receiving Notification of Documentation Updates
To receive notification of documentation updates, navigate to the device product folder on ti.com. In the upper
right corner, click on Alert me to register and receive a weekly digest of any product information that has
changed. For change details, review the revision history included in any revised document.
12.3 Community Resources
TI E2E™ support forums are an engineer's go-to source for fast, verified answers and design help — straight
from the experts. Search existing answers or ask your own question to get the quick design help you need.
Linked content is provided "AS IS" by the respective contributors. They do not constitute TI specifications and do
not necessarily reflect TI's views; see TI's Terms of Use.
12.4 Trademarks
E2E is a trademark of Texas Instruments.
All other trademarks are the property of their respective owners.
12.5 Electrostatic Discharge Caution
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
12.6 Glossary
SLYZ022 — TI Glossary.
This glossary lists and explains terms, acronyms, and definitions.
13 Mechanical, Packaging, and Orderable Information
The following pages include mechanical, packaging, and orderable information. This information is the most
current data available for the designated devices. This data is subject to change without notice and revision of
this document. For browser-based versions of this data sheet, refer to the left-hand navigation.
16
Submit Documentation Feedback
Copyright © 2018–2019, Texas Instruments Incorporated
Product Folder Links: TLV6703
PACKAGE OPTION ADDENDUM
www.ti.com
10-Dec-2020
PACKAGING INFORMATION
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
(2)
Lead finish/
Ball material
MSL Peak Temp
Op Temp (°C)
Device Marking
(3)
(4/5)
(6)
TLV6703DDCR
ACTIVE
SOT-23-THIN
DDC
6
3000
RoHS & Green
NIPDAU
Level-2-260C-1 YEAR
-40 to 125
1MR1
TLV6703DDCT
ACTIVE
SOT-23-THIN
DDC
6
250
RoHS & Green
NIPDAU
Level-2-260C-1 YEAR
-40 to 125
1MR1
TLV6703DSER
ACTIVE
WSON
DSE
6
3000
RoHS & Green
NIPDAU
Level-1-260C-UNLIM
-40 to 125
HE
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance
do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may
reference these types of products as "Pb-Free".
RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption.
Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of