TLV810M, TLV810R
TLV810S, TLV810Z
SBVS158A – APRIL 2011 – REVISED JUNE 2011
www.ti.com
3-Pin Voltage Supervisors
with Active-High, Push-Pull Reset
Check for Samples: TLV810M, TLV810R, TLV810S, TLV810Z
FEATURES
DESCRIPTION
•
•
•
The TLV810 family of supervisory circuits provides
circuit initialization and timing supervision, primarily
for DSPs and processor-based systems.
1
2
•
•
•
•
3-Pin SOT23 Package
Supply Current: 9 µA (Typical)
Precision Supply Voltage Monitor:
2.5 V, 3 V, 3.3 V, 5 V
Power-On Reset Generator with
Fixed Delay Time of 200 ms
Pin-for-Pin Compatible with MAX810
Temperature Range: –40°C to +125°C
Push-Pull, RESET Output
APPLICATIONS
•
•
•
•
•
•
•
•
DSPs, Microcontrollers, and Microprocessors
Wireless Communication Systems
Portable/Battery-Powered Equipment
Programmable Controls
Intelligent Instruments
Industrial Equipment
Notebook and Desktop Computers
Automotive Systems
During power-on, RESET is asserted when the
supply voltage (VDD) becomes higher than 1.1 V.
Thereafter, the supervisory circuit monitors VDD and
keeps RESET active as long as VDD remains below
the threshold voltage VIT. An internal timer delays the
return of the output to the inactive state (low) to
ensure proper system reset. The delay time (td(typ) =
200 ms) starts after VDD has risen above the
threshold voltage, VIT. When the supply voltage drops
below the VIT threshold voltage, the output becomes
active (high) again. No external components are
required. All the devices in this family have a fixed
sense-threshold voltage (VIT) set by an internal
voltage divider.
The product spectrum is designed for supply voltages
of 2.5 V, 3 V, 3.3 V, and 5 V. The circuits are
available in a 3-pin SOT-23 package. The TLV810
devices are characterized for operation over a
temperature range of –40°C to +125°C.
DEVICE FAMILY COMPARISON
DEVICE
FUNCTION
TLV803
Open-Drain, RESET Output
TLV809
Push-Pull, RESET Output
TLV810
Push-Pull, RESET Output
TYPICAL APPLICATION
3.3-V LDO
3.3 V
5V
OUT
IN
GND
VDD
TLV810
DBZ Package
(Top View)
VDD
DSP/FPGA/ASIC
TLV810S
GND
1
RESET
RESET
GND
3
RESET
VDD
GND
2
1
2
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2011, Texas Instruments Incorporated
TLV810M, TLV810R
TLV810S, TLV810Z
SBVS158A – APRIL 2011 – REVISED JUNE 2011
www.ti.com
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
PACKAGE/ORDERING INFORMATION (1)
PRODUCT
THRESHOLD
VOLTAGE
PACKAGELEAD
PACKAGE
DESIGNATOR
SPECIFIED
OPERATING
TEMPERATURE
PACKAGE
MARKING
TLV810Z
2.25 V
SOT23-3
DBZ
–40°C to +125°C
VOVQ
TLV810R
TLV810S
TLV810M
(1)
2.64 V
2.93 V
4.38 V
SOT23-3
SOT23-3
SOT23-3
–40°C to +125°C
DBZ
–40°C to +125°C
DBZ
–40°C to +125°C
DBZ
VOWQ
VOXQ
VOYQ
ORDERING
INFORMATION
TRANSPORT MEDIA,
QUANTITY
TLV810ZDBZR
Tape and Reel, 3000
TLV810ZDBZT
Tape and Reel, 250
TLV810RDBZR
Tape and Reel, 3000
TLV810RDBZT
Tape and Reel, 250
TLV810SDBZR
Tape and Reel, 3000
TLV810SDBZT
Tape and Reel, 250
TLV810MDBZR
Tape and Reel, 3000
TLV810MDBZT
Tape and Reel, 250
For the most current package and ordering information, see the Package Option Addendum at the end of this data sheet, or visit the
device product folders at www.ti.com.
ABSOLUTE MAXIMUM RATINGS (1)
Over operating free-air temperature range (unless otherwise noted).
VALUE
Voltage
VDD
(2)
All other pins (2)
MIN
MAX
0
7
–0.3
7
V
5
mA
Maximum low output current, IOL
Current
Temperature
(2)
V
–5
mA
Input clamp current, IIK (VI < 0 or VI > VDD)
±20
mA
Output clamp current, IOK (VO < 0 or VO > VDD)
±20
mA
Maximum high output current, IOH
Operating free-air temperature range, TA
–40
+125
°C
Storage temperature range, Tstg
–65
+150
°C
+260
°C
Soldering temperature
(1)
UNIT
Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating
Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
All voltage values are with respect to GND. For reliable operation the device should not be operated at 7 V for more than t = 1000h
continuously.
THERMAL INFORMATION
TLV810
THERMAL METRIC
(1)
DBZ
UNITS
3 PINS
θJA
Junction-to-ambient thermal resistance
286.9
θJCtop
Junction-to-case (top) thermal resistance
105.6
θJB
Junction-to-board thermal resistance
124.4
ψJT
Junction-to-top characterization parameter
25.8
ψJB
Junction-to-board characterization parameter
107.9
θJCbot
Junction-to-case (bottom) thermal resistance
—
(1)
2
°C/W
For more information about traditional and new thermal metrics, see the IC Package Thermal Metrics application report, SPRA953.
Copyright © 2011, Texas Instruments Incorporated
TLV810M, TLV810R
TLV810S, TLV810Z
SBVS158A – APRIL 2011 – REVISED JUNE 2011
www.ti.com
RECOMMENDED OPERATING CONDITIONS
At specified temperature range (unless otherwise noted).
MIN
MAX
UNIT
VDD
Supply voltage
1.1
6
V
TA
Operating free-air temperature range
–40
+125
°C
ELECTRICAL CHARACTERISTICS
Over recommended operating free-air temperature range (unless otherwise noted).
PARAMETER
VOH
VOL
High-level output voltage
Low-level output voltage
TEST CONDITIONS
MIN
VDD = 2.0 V to 6 V, IOH = –500 µA
VDD – 0.2
VDD = 3.3 V, IOH = –2 mA
VDD – 0.4
VDD = 6 V, IOH = –4 mA, TA = –40°C to +85°C
VDD – 0.4
VDD = 6 V, IOH = –4 mA, TA = +85°C to +125°C
VDD – 0.5
TYP
VDD = 2.5 V to 6 V, IOL = 500 µA
0.2
VDD = 3.3 V, IOL = 2 mA
0.4
VIT–
Negative-going input
threshold voltage (2)
VOH ≥ VDD – 0.2 V, IOH = –50 µA
Vhys
Hysteresis
2.25
2.30
TLV810R
2.58
2.64
2.70
TLV810S
2.87
2.93
2.99
TLV810M
4.28
4.38
4.48
TLV810S
(1)
(2)
Supply current
V
30
IOH = –50 µA, TA = +25°C
TLV810M
IDD
V
2.20
TLV810R
V
0.4
1.1
TLV810Z
TLV810Z
UNIT
V
VDD = 6 V, IOL = 4 mA
Power-up reset voltage (1)
MAX
35
mV
40
60
VDD = 2 V, output unconnected
9
15
VDD = 6 V, output unconnected
20
30
µA
The lowest supply voltage at which RESET becomes valid. tr, VDD ≤ 66.7 ms/V.
To ensure best stability of the threshold voltage, a bypass capacitor ( 0.1-µF ceramic) should be placed near the supply terminals.
Copyright © 2011, Texas Instruments Incorporated
3
TLV810M, TLV810R
TLV810S, TLV810Z
SBVS158A – APRIL 2011 – REVISED JUNE 2011
www.ti.com
SWITCHING CHARACTERISTICS
At TA = +25°C, unless otherwise noted.
PARAMETER
TEST CONDITIONS
tw
Pulse width at VDD
VDD = 1.08 VIT– to 0.92 VIT–
td
Delay time
VDD ≥ VIT– + 0.2 V; see Timing Diagram
MIN
TYP
120
200
MAX
UNIT
280
ms
µs
1
TIMING DIAGRAM
VIT- + Vhys
VIT-
VDD
1.1 V
1.1 V
RESET
td
Valid Output
FUNCTIONAL BLOCK DIAGRAM
TLV810
VDD
R1
_
VDD
+
R2
Reset
Logic
+
Timer
(1)
RESET
(1)
GND
Reference
Voltage
of 1.137 V
(1)
4
Oscillator
Parasitic diode.
Copyright © 2011, Texas Instruments Incorporated
TLV810M, TLV810R
TLV810S, TLV810Z
SBVS158A – APRIL 2011 – REVISED JUNE 2011
www.ti.com
TYPICAL CHARACTERISTICS
At TA = +25°C, VIT– = 4.38 V, and VDD = 5.0 V, unless otherwise noted.
LOW-LEVEL OUTPUT VOLTAGE
vs LOW-LEVEL OUTPUT CURRENT
SUPPLY CURRENT
vs SUPPLY VOLTAGE
1.2
25
+125°C
+85°C
+25°C
0°C
-40°C
1
20
IDD (mA)
VOL (V)
0.8
+125°C
+85°C
+25°C
0°C
-40°C
0.6
15
10
0.4
5
0.2
VDD = 2.5 V
0
0
0
1
2
3
4
5
0
1
2
IOL (mA)
5
6
Figure 2.
HIGH-LEVEL OUTPUT VOLTAGE
vs HIGH-LEVEL OUTPUT CURRENT
NORMALIZED INPUT THRESHOLD VOLTAGE
vs FREE-AIR TEMPERATURE AT VDD
1.001
VDD = 2.5 V
1
Normalized VIT- (V)
2.5
2
VOH (V)
4
Figure 1.
3
1.5
+125°C
+85°C
+25°C
0°C
-40°C
1
0.5
0.999
0.998
0.997
0.996
0.995
0
0.994
0
-1
-2
-3
-4
-5
-40 -25 -10
5
IOH (mA)
20 35 50 65
Temperature (°C)
Figure 3.
Figure 4.
MINIMUM PULSE DURATION AT VDD
vs VDD THRESHOLD OVERDRIVE VOLTAGE
(TLV810M)
DELAY TIME
vs TEMPERATURE
1.6
80
95
110 125
80
95
110 125
230
1.4
220
1.2
210
1
td (ms)
Minimum Pulse Duration at VDD (ms)
3
VDD (V)
0.8
0.6
+125°C
+85°C
+25°C
0°C
-40°C
0.4
0.2
200
190
180
170
0
0
0.5
1
1.5
(VIT-) - VDD (V)
Figure 5.
Copyright © 2011, Texas Instruments Incorporated
2
2.5
-40 -25 -10
5
20 35 50 65
Temperature (°C)
Figure 6.
5
TLV810M, TLV810R
TLV810S, TLV810Z
SBVS158A – APRIL 2011 – REVISED JUNE 2011
www.ti.com
APPLICATION INFORMATION
VDD TRANSIENT REJECTION
The TLV810 has built-in rejection of fast transients on the VDD pin. The rejection of transients depends on both
the duration and the amplitude of the transient. The amplitude of the transient is measured from the bottom of the
transient to the negative threshold voltage of the TLV810, as shown in Figure 7.
VDD
VITTransient
Amplitude
tw
Duration
Figure 7. Voltage Transient Measurement
The TLV810 does not respond to transients that are fast duration/low amplitude or long duration/small amplitude.
Figure 5 shows the relationship between the transient amplitude and the duration needed to trigger a reset. Any
combination of duration and amplitude above the curve generates a reset signal.
RESET DURING POWER UP/DOWN
The TLV810 output is valid when VDD is greater than 1.1 V. When VDD is less than 1.1 V, the output is undefined.
Figure 8 shows a typical waveform for the power-up sequence.
VIT- + Vhys
VDD
1.1 V
RESET
td
Valid Output
Figure 8. Power-Up Response
6
Copyright © 2011, Texas Instruments Incorporated
TLV810M, TLV810R
TLV810S, TLV810Z
SBVS158A – APRIL 2011 – REVISED JUNE 2011
www.ti.com
BIDIRECTIONAL RESET PINS
Some microcontrollers have bidirectional reset pins that act as both inputs and outputs. In a situation where both
the TLV810 and the microcontroller are attempting to drive the RESET line, a series resistor should be placed
between the output of the TLV810 and the RESET pin of the microcontroller to protect against excessive current
flow. Figure 9 shows the connection of the TLV810 to a microcontroller using a series resistor to drive a
bidirectional RESET line.
3.3 V
VCC
VDD
Microprocessor
TLV810S
RESET
47 kW
RST
GND
Figure 9. Connection to Bidirectional Reset Pin
Copyright © 2011, Texas Instruments Incorporated
7
PACKAGE OPTION ADDENDUM
www.ti.com
15-Jul-2022
PACKAGING INFORMATION
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
(2)
Lead finish/
Ball material
MSL Peak Temp
Op Temp (°C)
Device Marking
(3)
(4/5)
(6)
TLV810MDBZR
LIFEBUY
SOT-23
DBZ
3
3000
RoHS & Green
NIPDAUAG
Level-1-260C-UNLIM
-40 to 125
VOYQ
TLV810MDBZT
LIFEBUY
SOT-23
DBZ
3
250
RoHS & Green
NIPDAUAG
Level-1-260C-UNLIM
-40 to 125
VOYQ
TLV810RDBZR
LIFEBUY
SOT-23
DBZ
3
3000
RoHS & Green
NIPDAUAG
Level-1-260C-UNLIM
-40 to 125
VOWQ
TLV810RDBZT
LIFEBUY
SOT-23
DBZ
3
250
RoHS & Green
NIPDAUAG
Level-1-260C-UNLIM
-40 to 125
VOWQ
TLV810SDBZR
LIFEBUY
SOT-23
DBZ
3
3000
RoHS & Green
NIPDAUAG
Level-1-260C-UNLIM
-40 to 125
VOXQ
TLV810SDBZT
LIFEBUY
SOT-23
DBZ
3
250
RoHS & Green
NIPDAUAG
Level-1-260C-UNLIM
-40 to 125
VOXQ
TLV810ZDBZR
LIFEBUY
SOT-23
DBZ
3
3000
RoHS & Green
NIPDAUAG
Level-1-260C-UNLIM
-40 to 125
VOVQ
TLV810ZDBZT
LIFEBUY
SOT-23
DBZ
3
250
RoHS & Green
NIPDAUAG
Level-1-260C-UNLIM
-40 to 125
VOVQ
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance
do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may
reference these types of products as "Pb-Free".
RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption.
Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of