Order
Now
Product
Folder
Support &
Community
Tools &
Software
Technical
Documents
TMP235-Q1, TMP236-Q1
SBOS939C – APRIL 2019 – REVISED NOVEMBER 2019
TMP23x-Q1 Automotive Grade, High-Accuracy Analog Output Temperature Sensors
1 Features
3 Description
•
The TMP23x-Q1 devices are a family of automotive
grade precision CMOS integrated-circuit linear analog
temperature sensors with an output voltage
proportional to temperature, serving various
automotive
applications
from
powertrain
to
infotainment. These temperature sensors have a
typical accuracy from 0°C to +70°C of ±0.5°C. The
TMP235-Q1 device provides a positive slope output
of 10 mV/°C over the full –40°C to +150°C
temperature range and a supply range from 2.3 V to
5.5 V. The higher gain TMP236-Q1 sensor provides a
positive slope output of 19.5 mV/°C from –10°C to
+125°C and a supply range from 3.1 V to 5.5 V.
1
•
•
•
•
•
•
•
•
AEC-Q100 qualified for automotive applications
– TMP235-Q1 grade 0: –40°C to +150°C
– TMP236-Q1 grade 1: –40°C to +125°C
Tight accuracy across a wide temperature range:
– ±2.5°C (maximum): –40°C to +150°C
(TMP235-Q1)
– ±2.5°C (maximum): –10°C to +125°C
(TMP236-Q1)
Positive slope sensor gain, offset (typical):
– 10 mV/°C, 500 mV at 0°C (TMP235-Q1)
– 19.5 mV/°C, 400 mV at 0°C (TMP236-Q1)
Wide operating supply voltage range:
– 2.3 V to 5.5 V (TMP235-Q1)
– 3.1 V to 5.5 V (TMP236-Q1)
Short-circuit protected output
Low power: 9 μA (typical)
Strong output for driving loads up to 1000 pF
Available package options:
– 5-pin SC70 (DCK) surface mount
– 3-pin SOT-23 (DBZ) surface mount
– Footprint compatible with industry-standard
LMT8x-Q1, LM50-Q1, and LM20 temperature
sensors
Cost-effective alternative to thermistors
Device Information(1)
PART NUMBER
TMP235-Q1,
TMP236-Q1
PACKAGE
BODY SIZE (NOM)
SC70 (5)
2.00 mm × 1.25 mm
SOT-23 (3)
2.92 mm × 1.30 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
2 Applications
•
•
•
•
•
The 9-µA typical quiescent current and 800-µs typical
power-on time enable effective power-cycling
architectures to minimize power consumption for
battery-powered devices. A class-AB output driver
provides a strong 500-µA maximum output to drive
capacitive loads up to 1000 pF and is designed to
directly interface to analog-to-digital converter sample
and hold inputs. With excellent accuracy and a strong
linear output driver, the TMP23x-Q1 analog output
temperature sensors are cost-effective alternatives to
passive thermistors.
Automotive head unit
Electric power steering (EPS)
Shifter system
Battery management system (BMS)
Gasoline engine
Functional Block Diagram
Output Voltage vs Ambient
3
VDD
2.5
Thermal Diodes
VOUT
VOUT (V)
2
1.5
1
0.5
GND
0
-50
TMP235
TMP236
-25
0
25
50
TA (qC)
75
100
125
150
D003
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.
TMP235-Q1, TMP236-Q1
SBOS939C – APRIL 2019 – REVISED NOVEMBER 2019
www.ti.com
Table of Contents
1
2
3
4
5
6
7
Features ..................................................................
Applications ...........................................................
Description .............................................................
Revision History.....................................................
Pin Configuration and Functions .........................
Specifications.........................................................
1
1
1
2
3
4
6.1
6.2
6.3
6.4
6.5
6.6
4
4
4
4
5
6
Absolute Maximum Ratings ......................................
ESD Ratings..............................................................
Recommended Operating Conditions.......................
Thermal Information ..................................................
Electrical Characteristics...........................................
Typical Characteristics ..............................................
Detailed Description .............................................. 8
7.1 Overview ................................................................... 8
7.2 Functional Block Diagram ......................................... 8
7.3 Feature Description................................................... 8
7.4 Device Functional Modes........................................ 10
8
Application and Implementation ........................ 11
8.1 Application Information............................................ 11
8.2 Typical Application .................................................. 11
9 Power Supply Recommendations...................... 12
10 Layout................................................................... 12
10.1 Layout Guidelines ................................................. 12
10.2 Layout Examples................................................... 12
11 Device and Documentation Support ................. 13
11.1
11.2
11.3
11.4
11.5
11.6
Related Links ........................................................
Receiving Notification of Documentation Updates
Support Resources ...............................................
Trademarks ...........................................................
Electrostatic Discharge Caution ............................
Glossary ................................................................
13
13
13
13
13
13
12 Mechanical, Packaging, and Orderable
Information ........................................................... 13
4 Revision History
NOTE: Page numbers for previous revisions may differ from page numbers in the current version.
Changes from Revision B (October 2019) to Revision C
•
Added temperature accuracy specs for the TMP236-Q1 SOT-23 package.......................................................................... 5
Changes from Revision A (May 2019) to Revision B
•
2
Page
Changed document status from Advance Information to Production Data ............................................................................ 1
Changes from Original (April 2019) to Revision A
•
Page
Page
Changed recommended operating temperature range from: –50°C to 150°C to: –40°C to 150°C ..................................... 4
Submit Documentation Feedback
Copyright © 2019, Texas Instruments Incorporated
Product Folder Links: TMP235-Q1 TMP236-Q1
TMP235-Q1, TMP236-Q1
www.ti.com
SBOS939C – APRIL 2019 – REVISED NOVEMBER 2019
5 Pin Configuration and Functions
DBZ Package
3-Pin SOT-23
Top View
VDD
DCK Package
5-Pin SC70
Top View
1
GND
3
VOUT
2
NC
1
GND
2
VOUT
3
5
NC
4
VDD
Not to scale
Not to scale
NC- no internal connection
Pin Functions
NAME
PIN
TYPE
DESCRIPTION
SOT-23
SC70
GND
3
2
Ground
NC
—
5
—
No internal connection. This pin may be left floating or connected to GND.
NC
—
1
—
No internal connection. This pin may be left floating or connected to GND.
VOUT
2
3
O
Outputs voltage proportional to temperature
VDD
1
4
I
Positive supply input
Power supply ground.
Submit Documentation Feedback
Copyright © 2019, Texas Instruments Incorporated
Product Folder Links: TMP235-Q1 TMP236-Q1
3
TMP235-Q1, TMP236-Q1
SBOS939C – APRIL 2019 – REVISED NOVEMBER 2019
www.ti.com
6 Specifications
6.1 Absolute Maximum Ratings
over operating free-air temperature range (unless otherwise noted)
(1)
MIN
MAX
Supply voltage, VDD
Output voltage, VOUT
–0.3
Output current
Latch-up current, each pin
V
(VDD + 0.3)
–30
+30
–200
+200
Junction temperature (TJ)
mA
+150
Storage temperature (Tstg)
(1)
UNIT
+6
–65
°C
+150
Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, which do not imply functional operation of the device at these or anyother conditions beyond those indicated under Recommended
Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
6.2 ESD Ratings
Human body model (HBM), per AEC Q100-002
HBM ESD Classification Level 2
V(ESD)
(1)
VALUE
UNIT
±2000
V
All Pins
±500
V
Corner Pins
±750
V
(1)
Electrostatic discharge
Charged device model (CDM), per AEC Q100-011
CDM ESD Classification Level C4B
AEC Q100-002 indicates that HBM stressing shall be in accordance with the ANSI/ESDA/JEDEC JS-001 specification
6.3 Recommended Operating Conditions
over operating free-air temperature range (unless otherwise noted)
MIN
VDD
TA
NOM
MAX
Input voltage (TMP235-Q1)
2.3
5.5
Input voltage (TMP236-Q1)
3.1
5.5
Operating free-air temperature
–40
150
UNIT
V
°C
6.4 Thermal Information
TMP23X-Q1
THERMAL METRIC
(1) (2)
DCK (SC70)
DBZ (SOT-23)
5 PINS
3 PINS
UNIT
RθJA
Junction-to-ambient thermal resistance (3) (4)
275
167
°C/W
RθJC(top)
Junction-to-case (top) thermal resistance
84
90
°C/W
RθJB
Junction-to-board thermal resistance
56
146
°C/W
ΨJT
Junction-to-top characterization parameter
1.2
35
°C/W
ΨJB
Junction-to-board characterization parameter
55
146
°C/W
(1)
(2)
(3)
(4)
4
For more information about traditional and new thermal metrics, see the Semiconductor and IC Package Thermal Metrics application
report.
For information on self-heating and thermal response time see Layout Guidelines section.
The junction to ambient thermal resistance (RθJA ) under natural convection is obtained in a simulation on a JEDEC-standard, High-K
board as specified in JESD51-7, in an environment described in JESD51-2. Exposed pad packages assume that thermal vias are
included in the PCB, per JESD 51-5.
Changes in output due to self heating can be computed by multiplying the internal dissipation by the thermal resistance.
Submit Documentation Feedback
Copyright © 2019, Texas Instruments Incorporated
Product Folder Links: TMP235-Q1 TMP236-Q1
TMP235-Q1, TMP236-Q1
www.ti.com
SBOS939C – APRIL 2019 – REVISED NOVEMBER 2019
6.5 Electrical Characteristics
TMP235-Q1: VDD = 2.3 V to 5.5 V, GND = Ground, TA = –40°C to +125°C and no load (unless otherwise noted)
TMP236-Q1: VDD = 3.1 V to 5.5 V, GND = Ground, TA = –10°C to +125°C and no load (unless otherwise noted)
PARAMETER
TEST CONDITIONS
MIN
TYP
MAX
UNIT
TA = –40℃ to +125℃, TMP235-Q1
14.5
µA
TA = –10℃ to +125℃, TMP236-Q1
15
TA = 150℃, TMP235-Q1
17
POWER SUPPLY
IDD
Operating current
Δ℃/
ΔVDD
TA = 25℃, VDD = 2.3 V, TMP235-Q1
9
TA = 25℃, VDD = 3.1 V, TMP236-Q1
10
Line regulation
–0.1
0.02
0.1
℃/V
SENSOR ACCURACY
TA = 25°C
Temperature accuracy (1)
TACY
TACY
Temperature accuracy
(1)
±0.5
TA = 0°C to 70°C (SC70 Package) (TMP235-Q1)
–1.5
±0.5
+1.2
TA = 0°C to 70°C (SOT-23 Package) (TMP235Q1)
–1.5
±0.5
+1.2
TA = –40°C to 125°C (TMP235-Q1)
–2.5
±0.5
+2.5
TA = –40°C to 150°C (TMP235-Q1)
–2.5
±0.5
+2.5
TA = –10°C to 125°C (TMP236-Q1)
–2.5
±0.5
+2.5
TA = 0°C to 70°C (SOT-23 Package) (TMP236Q1)
–1.5
±0.5
+1.5
℃
℃
SENSOR OUTPUT
V0℃
Output voltage offset at 0 °C
TC
Temperature coefficient (sensor gain)
VONL
Output nonlinearity (2)
IOUT
Output current
ZOUT
Output impedance
TMP235-Q1
500
TMP236-Q1
400
TMP235-Q1
10
TMP236-Q1
19.5
TA = 0 °C to 70 °C, no load
±0.5
IOUT = 100 μA, f = 100 Hz
20
IOUT = 100 μA, f = 500 Hz
50
TA = 0°C to 70°C, IOUT = 100 μA,
ΔVOUT / ΔIOUT
tON
Turn on time
Time to reach accuracy within ±0.5°C
CLOAD
Typical load capacitance
tRES
Thermal response to 63%
(2)
mV/℃
℃
500
Output load regulation
(1)
mV
Ω
Ω
1
800
μs
1000
SC70
30°C (Air) to +125°C (Fluid Bath)
μA
1.3
pF
s
Accuracy is defined as the error between the measured and reference output voltages, tabulated in the TMP235-Q1 Transfer
Table and TMP236-Q1 Transfer Table at the specified conditions of supply voltage and temperature (expressed in °C). Accuracy limits
include line regulation within the specified conditions. Accuracy limits do not include load regulation; they assume no DC load.
Nonlinearity is defined as the deviation of the output-voltage-versus-temperature curve from the best-fit straight line, over the device's
rated temperature range.
Submit Documentation Feedback
Copyright © 2019, Texas Instruments Incorporated
Product Folder Links: TMP235-Q1 TMP236-Q1
5
TMP235-Q1, TMP236-Q1
SBOS939C – APRIL 2019 – REVISED NOVEMBER 2019
www.ti.com
6.6 Typical Characteristics
at TA = 25°C, (unless otherwise noted)
6
3
Average
Avg ±3V
Limits
2.5
2
2
VOUT (V)
Accuracy (°C)
4
0
1.5
-2
1
-4
0.5
-6
-50
-25
0
25
50
TA (°C)
75
100
125
TMP235
TMP236
0
-50
150
-25
25
50
75
100
D001
D003
Figure 2. Output Voltage vs. Ambient Temperature
Figure 1. Accuracy vs. TA Temperature
0.05
12
IDD (PA)
14
0
10
8
-0.05
VDD = 2.3 V
VDD = 5.5 V
-25
0
25
50
75
100
125
TA (qC)
VDD = 2.3 V
6
-50
150
0
25
D004
50
75
100
125
150
D005
TMP23x-Q1: IOUT = 0 µA, CLOAD = 1000 pF
Figure 3. Changes in Accuracy vs. Ambient Temperature
(Due to Load)
Figure 4. Supply Current vs. Temperature
0.1
3.5
2.5
Normalized Line Regulation ('qC/'VDD)
IOUT = 500 PA
IOUT = 400 uA
IOUT = 300 uA
IOUT = 200 uA
IOUT = 100 uA
3
Load Regulation 'V/'I (:)
-25
TA (qC)
TMP23x-Q1: IOUT = from 0 µA to 100 µA, CLOAD = 1000 pF
2
1.5
1
0.5
0
-50
-25
0
25
50
TA (qC)
75
100
125
150
TMP235
0.05
0
-0.05
-0.1
-50
-25
D006
TMP23x-Q1: VDD = 2.3 V, CLOAD = 1000 pF
Figure 5. Load Regulation vs. Ambient Temperature
6
150
IOUT = 0 µA, CLOAD = 1000 pF
0.1
-0.1
-50
125
TA (qC)
TMP235-Q1: VDD = 2.3 to 5.5 V, IOUT = 0 µA, CLOAD = 1000 pF
' Accuracy Due to Load (qC)
0
0
25
50
TA (qC)
75
100
125
150
D007
TMP23x-Q1: VDD = 2.3 to 5.5 V, IOUT = 0 µA, CLOAD = 1000 pF
Figure 6. Line Regulation (Δ°C / ΔVDD) vs. Ambient
Temperature
Submit Documentation Feedback
Copyright © 2019, Texas Instruments Incorporated
Product Folder Links: TMP235-Q1 TMP236-Q1
TMP235-Q1, TMP236-Q1
www.ti.com
SBOS939C – APRIL 2019 – REVISED NOVEMBER 2019
Typical Characteristics (continued)
at TA = 25°C, (unless otherwise noted)
150
1
125
Temperature (qC)
VOUT (V)
0.8
0.6
0.4
0.2
100
75
50
25
SC70 Package
0
-2
0
0
0.5
1
1.5
2
2.5
3
VDD (V)
3.5
4
4.5
5
5.5
0
2
4
D008
TMP23x-Q1: TA = 25°C
6
8
Time (ms)
10
12
14
16
D011
TMP23x-Q1: 1 × 1 (inches) PCB, Air 26°C to Fluid Bath 123°C
Figure 7. Output Voltage vs. Power Supply
Figure 8. Thermal Response (Air-to-Fluid Bath)
Output Impedance (:
1000
100
10
1
1
10
100
1000
Frequency (Hz)
10000
100000
D012
TMP23x-Q1: TA = 25°C, VDD = 5 V, IOUT = 100 µA
Figure 9. Output Impedance vs. Frequency
Submit Documentation Feedback
Copyright © 2019, Texas Instruments Incorporated
Product Folder Links: TMP235-Q1 TMP236-Q1
7
TMP235-Q1, TMP236-Q1
SBOS939C – APRIL 2019 – REVISED NOVEMBER 2019
www.ti.com
7 Detailed Description
7.1 Overview
The TMP23x-Q1 devices are a family of linear analog temperature sensors with an output voltage proportional to
temperature. These temperature sensors have an accuracy from 0°C to 70°C of ±1.5°C. The TMP235-Q1 device
provides a positive slope output of 10 mV/°C over the full –40°C to +150°C temperature range and a supply
range from 2.3 V to 5.5 V. The higher gain TMP236-Q1 sensor provides a positive slope output of 19.5 mV/°C
from –10°C to +125°C and a supply range from 3.1 V to 5.5 V. A class-AB output driver provides a maximum
output of 500 µA to drive capacitive loads up to 1000 pF.
7.2 Functional Block Diagram
VDD
Thermal Diodes
VOUT
GND
7.3 Feature Description
As shown in Figure 2, the TMP23x-Q1 devices are linear. A small VOUT gain shift, however, is present at
temperatures above 100°C. When small shifts are expected, a piecewise linear function provides the best
accuracy and is used for the device accuracy specifications (see Specifications). Typical output voltages of the
TMP23x-Q1 devices across the full operating temperature range are listed in Table 3 and Table 4. The ideal
linear columns represent the ideal linear VOUT output response with respect to temperature, while the piecewise
linear columns indicate the small voltage shift at elevated temperatures.
The piecewise linear function uses three temperature ranges listed in Table 1 and Table 2. In equation form, the
voltage output VOUT of the TMP23x-Q1 is calculated by Equation 1:
VOUT = (TA – TINFL) × TC + VOFFS
where
•
•
•
•
•
VOUT is the TMP23x-Q1 voltage output for a given temperature
TA is the ambient temperature in °C
TINFL is the temperature inflection point for a piecewise segment in °C
TC is the TMP23x-Q1 temperature coefficient or gain
VOFFS is the TMP23x-Q1 voltage offset
(1)
Therefore, the TA temperature for a given VOUT voltage output within a piecewise voltage range (VRANGE) is
calculated in Equation 2. For applications where the accuracy enhancement above 100°C is not required, use the
first row of Table 1 and Table 2 for all voltages.
TA = (VOUT – VOFFS ) / TC + TINFL
(2)
Table 1. TMP235-Q1 Piecewise Linear Function Summary
TA RANGE
(°C)
8
VRANGE (mV)
TINFL (°C)
TC (mV/°C)
VOFFS (mV)
–40 to +100
< 1500
0
10
500
100 to 125
1500 to 1752.5
100
10.1
1500
125 to 150
> 1752.5
125
10.6
1752.5
Submit Documentation Feedback
Copyright © 2019, Texas Instruments Incorporated
Product Folder Links: TMP235-Q1 TMP236-Q1
TMP235-Q1, TMP236-Q1
www.ti.com
SBOS939C – APRIL 2019 – REVISED NOVEMBER 2019
Table 2. TMP236-Q1 Piecewise Linear Function Summary
TA RANGE
(°C)
VRANGE (mV)
TINFL (°C)
TC (mV/°C)
VOFFS (mV)
–40 to +100
≤ 2350
0
19.5
400
100 to 125
> 2350
100
19.7
2350
125 to 150
—
—
—
—
Table 3. TMP235-Q1 Transfer Table
TEMPERATURE (°C)
VOUT (mV)
IDEAL LINEAR VALUES
VOUT (mV)
PIECEWISE LINEAR VALUES
–40
100
100
–35
150
150
–30
200
200
–25
250
250
–20
300
300
–15
350
350
–10
400
400
–5
450
450
0
500
500
5
550
550
10
600
600
15
650
650
20
700
700
25
750
750
30
800
800
35
850
850
40
900
900
45
950
950
50
1000
1000
55
1050
1050
60
1100
1100
65
1150
1150
70
1200
1200
75
1250
1250
80
1300
1300
85
1350
1350
90
1400
1400
95
1450
1450
100
1500
1500
105
1550
1550.5
110
1600
1601
115
1650
1651.5
120
1700
1702
125
1750
1752.5
130
1800
1805.5
135
1850
1858.5
140
1900
1911.5
145
1950
1964.5
150
2000
2017.5
Submit Documentation Feedback
Copyright © 2019, Texas Instruments Incorporated
Product Folder Links: TMP235-Q1 TMP236-Q1
9
TMP235-Q1, TMP236-Q1
SBOS939C – APRIL 2019 – REVISED NOVEMBER 2019
www.ti.com
Table 4. TMP236-Q1 Transfer Table
TEMPERATURE (°C)
VOUT (mV)
IDEAL LINEAR VALUES
VOUT (mV)
PIECEWISE LINEAR VALUES
–40
—
—
–35
—
—
–30
—
—
–25
—
—
–20
—
—
–15
—
—
–10
205
205
–5
303
303
0
400
400
5
498
498
10
595
595
15
693
693
20
790
790
25
888
888
30
985
985
35
1083
1083
40
1180
1180
45
1278
1278
50
1375
1375
55
1473
1473
60
1570
1570
65
1668
1668
70
1765
1765
75
1863
1863
80
1960
1960
85
2058
2058
90
2155
2155
2253
95
2253
100
2350
2350
105
2448
2448.5
110
2545
2547
115
2643
2645.4
120
2740
2743.9
125
2838
2842.4
130
—
—
135
—
—
140
—
—
145
—
—
150
—
—
7.4 Device Functional Modes
The singular functional mode of the TMP23x-Q1 is an analog output directly proportional to temperature.
10
Submit Documentation Feedback
Copyright © 2019, Texas Instruments Incorporated
Product Folder Links: TMP235-Q1 TMP236-Q1
TMP235-Q1, TMP236-Q1
www.ti.com
SBOS939C – APRIL 2019 – REVISED NOVEMBER 2019
8 Application and Implementation
NOTE
Information in the following applications sections is not part of the TI component
specification, and TI does not warrant its accuracy or completeness. TI’s customers are
responsible for determining suitability of components for their purposes. Customers should
validate and test their design implementation to confirm system functionality.
8.1 Application Information
The features of the TMP235-Q1 make the series of devices designed for various general temperature-sensing
applications. The TMP235-Q1 and TMP236-Q1 devices can operate down to a 2.3-V and a 3.1-V supply with 9µA power consumption, respectively. The TMP23x-Q1 series is mounted in two surface mount technology
packages (SC70 and SOT-23.)
8.2 Typical Application
8.2.1 Connection to an ADC
Simplified Input Circuit of
SAR Analog-to-Digital Converter
2.3 V to 5.5 V
Reset
TMP235-xx
VDD
OUT
CBP
Input
Pin
RFILTER
GND
CFILTER
RMUX
RSS Sample
CMUX
CSAMPLE
Figure 10. Suggested Connections to an ADC Input Stage
8.2.1.1 Design Requirements
See Figure 10 for suggested connections to an ADC input stage. Most CMOS-based ADCs have a sampled data
comparator input structure. When the ADC charges the sampling capacitor (CSAMPLE), the capacitor requires
instantaneous charge from the output of the analog source temperature sensor, such as the TMP235-Q1.
Therefore, the output impedance of the temperature sensor can affect ADC performance. In most cases, adding
an external capacitor (CFILTER) mitigates design challenges. The TMP235-Q1 is specified and characterized with
a 1000-pF maximum capacitive load (CLOAD). Figure 10 shows CLOAD as the sum of CFILTER + CMUX + CSAMPLE. TI
recommends maximizing the CFILTER value while allowing for the maximum specified ADC input capacitance
(CMUX + CSAMPLE) to limit the total CLOAD at 1000 pF. In most cases, a 680-pF CFILTER provides a reasonable
allowance for ADC input capacitance to minimize ADC sampling error and reduce noise coupling. An optional
series resistor (RFILTER) and CFILTER provides additional low-pass filtering to reject system level noise. TI
recommends placing RFILTER and CFILTER as close as possible to the ADC input for optimal performance.
8.2.1.2 Detailed Design Procedure
Depending on the input characteristics of the ADC, an external CFILTER may be required. The value of CFILTER
depends on the size of the sampling capacitor (CSAMPLE) and the sampling frequency while observing a maximum
CLOAD of 1000 pF. The capacitor requirements can vary because the input stages of all ADCs are not identical.
Figure 10 shows a general ADC application as an example only.
Submit Documentation Feedback
Copyright © 2019, Texas Instruments Incorporated
Product Folder Links: TMP235-Q1 TMP236-Q1
11
TMP235-Q1, TMP236-Q1
SBOS939C – APRIL 2019 – REVISED NOVEMBER 2019
www.ti.com
Typical Application (continued)
8.2.1.3 Application Curve
3
2.5
VOUT (V)
2
1.5
1
0.5
TMP235
TMP236
0
-50
-25
0
25
50
75
100
125
TA (qC)
150
D003
Figure 11. Output Voltage vs. Ambient
9 Power Supply Recommendations
The low supply current and supply range of the TMP23x-Q1 allow the device to be easily powered from many
sources.
Power supply bypassing is strongly recommended. In noisy environments, TI recommends to add a filter with
0.1-μF capacitor and 100-Ω resistor between external supply and VDD to limit the power supply noise. Larger
capacitances may be required and are dependent on the noise of the power supply.
10 Layout
10.1 Layout Guidelines
The layout of the TMP23x-Q1 series is simple. If a power supply bypass capacitor is used, the capacitor must be
connected as Layout Examples shows.
10.2 Layout Examples
VIA to ground plane
VIA to power plane
GND
GND
GND
OUT
0.1 µF
VDD
Figure 12. Recommended Layout: SC70 Package
12
Submit Documentation Feedback
Copyright © 2019, Texas Instruments Incorporated
Product Folder Links: TMP235-Q1 TMP236-Q1
TMP235-Q1, TMP236-Q1
www.ti.com
SBOS939C – APRIL 2019 – REVISED NOVEMBER 2019
11 Device and Documentation Support
11.1 Related Links
The table below lists quick access links. Categories include technical documents, support and community
resources, tools and software, and quick access to order now.
Table 5. Related Links
PARTS
PRODUCT FOLDER
ORDER NOW
TECHNICAL
DOCUMENTS
TOOLS &
SOFTWARE
SUPPORT &
COMMUNITY
TMP235-Q1
Click here
Click here
Click here
Click here
Click here
TMP236-Q1
Click here
Click here
Click here
Click here
Click here
11.2 Receiving Notification of Documentation Updates
To receive notification of documentation updates, navigate to the device product folder on ti.com. In the upper
right corner, click on Alert me to register and receive a weekly digest of any product information that has
changed. For change details, review the revision history included in any revised document.
11.3 Support Resources
TI E2E™ support forums are an engineer's go-to source for fast, verified answers and design help — straight
from the experts. Search existing answers or ask your own question to get the quick design help you need.
Linked content is provided "AS IS" by the respective contributors. They do not constitute TI specifications and do
not necessarily reflect TI's views; see TI's Terms of Use.
11.4 Trademarks
E2E is a trademark of Texas Instruments.
All other trademarks are the property of their respective owners.
11.5 Electrostatic Discharge Caution
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
11.6 Glossary
SLYZ022 — TI Glossary.
This glossary lists and explains terms, acronyms, and definitions.
12 Mechanical, Packaging, and Orderable Information
The following pages include mechanical, packaging, and orderable information. This information is the most
current data available for the designated devices. This data is subject to change without notice and revision of
this document. For browser-based versions of this data sheet, refer to the left-hand navigation.
Submit Documentation Feedback
Copyright © 2019, Texas Instruments Incorporated
Product Folder Links: TMP235-Q1 TMP236-Q1
13
PACKAGE OPTION ADDENDUM
www.ti.com
10-Dec-2020
PACKAGING INFORMATION
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
(2)
Lead finish/
Ball material
MSL Peak Temp
Op Temp (°C)
Device Marking
(3)
(4/5)
(6)
TMP235AEDBZRQ1
ACTIVE
SOT-23
DBZ
3
3000
RoHS & Green
NIPDAUAG
Level-2-260C-1 YEAR
-40 to 150
235E
TMP235AEDBZTQ1
ACTIVE
SOT-23
DBZ
3
250
RoHS & Green
NIPDAUAG
Level-2-260C-1 YEAR
-40 to 150
235E
TMP235AEDCKRQ1
ACTIVE
SC70
DCK
5
3000
RoHS & Green
NIPDAUAG
Level-2-260C-1 YEAR
-40 to 150
1CF
TMP235AEDCKTQ1
ACTIVE
SC70
DCK
5
250
RoHS & Green
NIPDAUAG
Level-2-260C-1 YEAR
-40 to 150
1CF
TMP235AQDBZRQ1
ACTIVE
SOT-23
DBZ
3
3000
RoHS & Green
NIPDAUAG
Level-2-260C-1 YEAR
-40 to 125
235Q
TMP235AQDBZTQ1
ACTIVE
SOT-23
DBZ
3
250
RoHS & Green
NIPDAUAG
Level-2-260C-1 YEAR
-40 to 125
235Q
TMP235AQDCKRQ1
ACTIVE
SC70
DCK
5
3000
RoHS & Green
NIPDAUAG
Level-2-260C-1 YEAR
-40 to 125
1CG
TMP235AQDCKTQ1
ACTIVE
SC70
DCK
5
250
RoHS & Green
NIPDAUAG
Level-2-260C-1 YEAR
-40 to 125
1CG
TMP236AQDBZRQ1
ACTIVE
SOT-23
DBZ
3
3000
RoHS & Green
NIPDAUAG
Level-2-260C-1 YEAR
-40 to 125
236Q
TMP236AQDBZTQ1
ACTIVE
SOT-23
DBZ
3
250
RoHS & Green
NIPDAUAG
Level-2-260C-1 YEAR
-40 to 125
236Q
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance
do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may
reference these types of products as "Pb-Free".
RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption.
Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of
工商网监
湘ICP备2023018690号
