www.ti.com
Table of Contents
User’s Guide
TPS40193 Buck Controller Evaluation Module User's
Guide
ABSTRACT
The TPS40193EVM-001 evaluation module is a 12-V to 1.8-V synchronous buck converter built around the
TPS40193 synchronous buck controller. This module provides a convenient test platform for both evaluating the
TPS40193 controller in a real application and prototyping synchronous buck converters using the TPS40193
controller.
Table of Contents
1 Introduction.............................................................................................................................................................................3
1.1 Description......................................................................................................................................................................... 3
1.2 Applications........................................................................................................................................................................3
1.3 Features............................................................................................................................................................................. 3
2 TPS40193EVM-001 Electrical Performance Specifications................................................................................................ 4
3 Schematic................................................................................................................................................................................5
4 General Configuration and Description................................................................................................................................6
4.1 Adjusting Output Voltage (R7)............................................................................................................................................6
4.2 Adjusting Short-Circuit Protection (R9).............................................................................................................................. 6
4.3 Disable Jumper (JP1).........................................................................................................................................................6
4.4 Test Point Descriptions.......................................................................................................................................................7
5 Test Setup................................................................................................................................................................................9
5.1 Equipment.......................................................................................................................................................................... 9
5.2 Equipment Setup..............................................................................................................................................................10
5.3 Start-Up/Shutdown Procedure..........................................................................................................................................11
5.4 Output Ripple Voltage Measurement Procedure.............................................................................................................. 11
5.5 Control Loop Gain and Phase Measurement Procedure..................................................................................................11
5.6 Equipment Shutdown....................................................................................................................................................... 12
6 TPS40193EVM-001 Typical Performance Data and Characteristic Curves..................................................................... 13
6.1 Efficiency..........................................................................................................................................................................13
6.2 Line and Load Regulation................................................................................................................................................ 13
6.3 Output Voltage Ripple...................................................................................................................................................... 14
6.4 Switch Node..................................................................................................................................................................... 15
6.5 Control Loop Bode Plot.................................................................................................................................................... 16
7 EVM Assembly Drawings and Layout.................................................................................................................................17
8 Bill of Materials..................................................................................................................................................................... 21
9 Revision History................................................................................................................................................................... 22
List of Figures
Figure 3-1. TPS40193EVM-001 Schematic.................................................................................................................................5
Figure 5-1. TPS40193EVM-001 Recommended Test Setup..................................................................................................... 10
Figure 5-2. TPS40193EVM-001 Output Ripple Measurement—Tip and Barrel Using TP15 and TP16.................................... 10
Figure 5-3. TPS40193EVM-001 Control Loop Measurement Setup..........................................................................................11
Figure 6-1. TPS40193EVM-001 Efficiency vs Load Current......................................................................................................13
Figure 6-2. TPS40193EVM-001 Output Voltage vs Load Current (±0.5% Window Shown)......................................................13
Figure 6-3. TPS40193EVM-001 Output Voltage Ripple............................................................................................................ 14
Figure 6-4. TPS40193EVM-001 Switching Waveforms (VIN = 8 V, IOUT = 10 A)....................................................................... 15
Figure 6-5. TPS40193EVM-001 Switching Waveforms (VIN = 14 V, IOUT = 10 A)..................................................................... 15
Figure 6-6. TPS40193EVM-001 Gain and Phase vs Frequency............................................................................................... 16
Figure 6-7. TPS40193EVM-001 Gain and Phase vs Frequency............................................................................................... 16
Figure 7-1. TPS40193EVM-001 Component Placement...........................................................................................................17
SLUU274A – MAY 2007 – REVISED JANUARY 2022
Submit Document Feedback
TPS40193 Buck Controller Evaluation Module User's Guide
Copyright © 2022 Texas Instruments Incorporated
1
Trademarks
www.ti.com
Figure 7-2. TPS40193EVM-001 Silkscreen...............................................................................................................................18
Figure 7-3. TPS40193EVM-001 Top Copper Layer...................................................................................................................18
Figure 7-4. TPS40193EVM-001 Bottom Copper Layer............................................................................................................. 19
Figure 7-5. TPS40193EVM-001 Internal Layer 1...................................................................................................................... 19
Figure 7-6. TPS40193EVM-001 Internal Layer 2...................................................................................................................... 20
List of Tables
Table 2-1. TPS40193EVM-001 Electrical and Performance Specifications.................................................................................4
Table 4-1. Adjusting VOUT with R7............................................................................................................................................... 6
Table 4-2. Adjusting VSCP with R9............................................................................................................................................... 6
Table 4-3. Test Point Descriptions............................................................................................................................................... 7
Table 8-1. Bill of Materials..........................................................................................................................................................21
Trademarks
All trademarks are the property of their respective owners.
2
TPS40193 Buck Controller Evaluation Module User's Guide
Copyright © 2022 Texas Instruments Incorporated
SLUU274A – MAY 2007 – REVISED JANUARY 2022
Submit Document Feedback
www.ti.com
Introduction
1 Introduction
The TPS40193EVM-001 evaluation module (EVM) is a synchronous buck converter that provides a fixed 1.8-V
output at up to 10 A from a 12-V input bus. The EVM is designed to power up from a single supply, so no
additional bias voltage is required for start-up. The demonstration module uses the TPS40193 reduced pin count
mid-voltage synchronous buck controller.
1.1 Description
The TPS40193EVM-001 is designed to use a regulated 12-V (8V–14V) bus to produce a regulated 1.8-V output
at up to 10 A of load current. The EVM is designed to demonstrate the capabilities of the TPS40193 in a typical
12-V bus to low-voltage application while providing a number of test points for evaluating the TPS40193 in a
given application. The EVM can be modified to support output voltages from 0.9 V to 3.3 V by changing a single
set resistor.
1.2 Applications
•
•
•
•
•
Non-isolated medium current point-of-load and low voltage bus converters
Networking equipment
Telecommunications equipment
Computer peripherals
Digital set-top box
1.3 Features
•
•
•
•
•
•
•
•
8-V to 14-V input range
1.8-V fixed output, adjustable with single resistor
10-ADC steady state output current
300-kHz switching frequency (fixed by the TPS40193)
Single SO-8 MOSFETs for both the main switch and synchronous rectifier
Double-sided, two active layer printed circuit board (PCB) with all components on top side
– Test point signals routed on internal layers
Active converter area of less than 1.2 inch2(
很抱歉,暂时无法提供与“TPS40193EVM-001”相匹配的价格&库存,您可以联系我们找货
免费人工找货