TPS60133PWPR

Product Folder Sample & Buy Support & Community Tools & Software Technical Documents TPS60130, TPS60131, TPS60132, TPS60133 SLVS258B – NOVEMBER 1999 – REVISED DECEMBER 2016 TPS6013x Regulated 5-V, 300-mA High-Efficiency Charge Pump DC-DC Converters 1 Features 3 Description • The TPS6013x step-up, regulated charge pump devices generate a 5-V ±4% output voltage from a 2.7-V to 5.4-V input voltage (three alkaline, NiCd, or NiMH batteries or one Lithium or Lilon battery). The output current is 300 mA for the TPS60130 and TPS60131, and 150 mA for the TPS60132 and TPS60133 devices, all from a 3-V input. Only four external capacitors are required to build a complete high efficiency dc/dc charge pump converter. To achieve the high efficiency over a wide input voltage range, the charge pump automatically selects between a 1.5× or doubler conversion mode. From a 3-V input, all ICs can start with full load current. 1 • • • • • • • • Up to 90% Efficiency From 2.7-V to 5.4-V Input Voltage Range Because of Special Switching Topology Up to 300-mA Output Current (TPS60130 and TPS60131) No Inductors Required, Low EMI Regulated 5-V ±4% Output Only Four External Components Required 60-µA Quiescent Supply Current 0.05-µA Shutdown Current Load Disconnected in Shutdown Thermally-Enhanced PowerPAD™ Package Device Information(1) PART NUMBER PACKAGE BODY SIZE (NOM) 2 Applications TPS6013x • • (1) For all available packages, see the orderable addendum at the end of the data sheet. • • • • • • • • Battery-Powered Applications Three Battery Cells to 5-V Conversion or Point-ofUse 3.3-V to 5-V Conversion Lilon Battery to 5-V Conversion Portable Instruments Battery-Powered Microprocessor Systems Backup-Battery Boost Converters PDA’s, Organizers, Laptops Handheld Instrumentation Medical Instruments (for example, Glucose Meters) PCMCIA and 5-V Smart Card Supply HTSSOP (20) 6.50 mm × 4.40 mm Typical Operating Circuit Copyright © 2016, Texas Instruments Incorporated 1 An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications, intellectual property matters and other important disclaimers. PRODUCTION DATA. TPS60130, TPS60131, TPS60132, TPS60133 SLVS258B – NOVEMBER 1999 – REVISED DECEMBER 2016 www.ti.com Table of Contents 1 2 3 4 5 6 7 8 9 Features .................................................................. Applications ........................................................... Description ............................................................. Revision History..................................................... Device Options....................................................... Pin Configuration and Functions ......................... Specifications......................................................... 1 1 1 2 3 4 5 7.1 7.2 7.3 7.4 7.5 7.6 7.7 5 5 5 5 6 6 7 Absolute Maximum Ratings ...................................... ESD Ratings.............................................................. Recommended Operating Conditions....................... Thermal Information .................................................. Electrical Characteristics........................................... Dissipation Ratings ................................................... Typical Characteristics .............................................. Parameter Measurement Information ................ 11 Detailed Description ............................................ 12 9.1 Overview ................................................................. 12 9.2 Functional Block Diagram ....................................... 12 9.3 Feature Description................................................. 13 10 Application and Implementation........................ 17 10.1 Application Information.......................................... 17 10.2 Typical Applications .............................................. 17 11 Power Supply Recommendations ..................... 22 12 Layout................................................................... 22 12.1 Layout Guidelines ................................................. 22 12.2 Layout Example .................................................... 22 12.3 Power Dissipation ................................................. 22 13 Device and Documentation Support ................. 24 13.1 13.2 13.3 13.4 13.5 13.6 13.7 Documentation Support ........................................ Related Links ........................................................ Receiving Notification of Documentation Updates Community Resources.......................................... Trademarks ........................................................... Electrostatic Discharge Caution ............................ Glossary ................................................................ 24 24 24 24 24 24 24 14 Mechanical, Packaging, and Orderable Information ........................................................... 25 4 Revision History NOTE: Page numbers for previous revisions may differ from page numbers in the current version. Changes from Revision A (December 1999) to Revision B Page • Added ESD Ratings table, Feature Description section, Device Functional Modes, Application and Implementation section, Power Supply Recommendations section, Layout section, Device and Documentation Support section, and Mechanical, Packaging, and Orderable Information section ................................................................................................. 1 • Deleted Lead temperature (260°C maximum) from Absolute Maximum Ratings table.......................................................... 5 2 Submit Documentation Feedback Copyright © 1999–2016, Texas Instruments Incorporated Product Folder Links: TPS60130 TPS60131 TPS60132 TPS60133 TPS60130, TPS60131, TPS60132, TPS60133 www.ti.com SLVS258B – NOVEMBER 1999 – REVISED DECEMBER 2016 5 Device Options Table 1. Available Options PART NUMBER DEVICE FEATURES TPS60130 Low battery detector TPS60131 Power good detector TPS60132 Low battery detector TPS60133 Power good detector 3-cell to 5 V, 300 mA 3-cell to 5 V, 150 mA Table 2. Device Family Products PART NUMBER DESCRIPTION TPS60100 Regulated 3.3-V, 200-mA low-noise charge pump dc-dc converter TPS60101 Regulated 3.3-V, 100-mA low-noise charge pump dc-dc converter TPS60110 Regulated 5-V, 300-mA low-noise charge pump dc-dc converter TPS60111 Regulated 5-V, 150-mA low-noise charge pump dc-dc converter TPS60120 Regulated 3.3-V, 200-mA high efficiency charge pump dc-dc converter with low battery comparator TPS60121 Regulated 3.3-V, 200-mA high efficiency charge pump dc-dc converter with Power Good comparator TPS60122 Regulated 3.3-V, 100-mA high efficiency charge pump dc-dc converter with low battery comparator TPS60123 Regulated 3.3-V, 100-mA high efficiency charge pump dc-dc converter with Power Good comparator Copyright © 1999–2016, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TPS60130 TPS60131 TPS60132 TPS60133 3 TPS60130, TPS60131, TPS60132, TPS60133 SLVS258B – NOVEMBER 1999 – REVISED DECEMBER 2016 www.ti.com 6 Pin Configuration and Functions TPS60130 and TPS60132 PWP Package 20-Pin HTSSOP Top View TPS60131 and TPS60133 PWP Package 20-Pin HTSSOP Top View Pin Functions PIN NAME NO. I/O DESCRIPTION C1+ 6 — Positive pin of the flying capacitor C1 C1– 8 — Negative pin of the flying capacitor C1 C2+ 15 — Positive pin of the flying capacitor C2 C2– 13 — Negative pin of the flying capacitor C2 ENABLE 3 I Enable input. Connect ENABLE to IN for normal operation. When ENABLE is a logic low, the device turns off and the supply current decreases to 0.05 µA. The output is disconnected from the input when the device is disabled. FB 4 I Feedback input. Connect FB to OUT as close to the load as possible to achieve best regulation. A resistive divider is on the chip to match internal reference voltage of 1.21 V. 1, 2, 19, 20 — Ground. Analog ground for internal reference and control circuitry. Connect to PGND pins through a short trace. 7, 14 I Supply input. Bypass IN to PGND with a capacitor that has half of the capacitance of the output capacitor. Connect both IN pins together through a short trace. O Low battery detector output (TPS60130 and TPS60132) or Power Good output (TPS60131 and TPS60133). Open drain output of the low battery or Power Good comparator. It can sink 1 mA. TI recommends a 100-kΩ to 1-MΩ pullup resistor to OUT. Leave the pin unconnected if the low battery or Power Good detector is not used. 18 I Low battery detector input (TPS60130 and TPS60132 only). The voltage at this input is compared to the internal 1.21-V reference voltage. Connect this pin to ground if the low battery detection function is not used. On the TPS60131 and TPS60133, this pin is not connected. 5, 16 O Regulated 5-V power output. Connect both OUT pins through a short trace and bypass OUT to GND with the output filter capacitor CO. 9, 10, 11, 12 — Power ground. Charge-pump current flows through this pin. Connect all PGND pins together. GND IN LBO/PG LBI/NC OUT PGND 4 17 Submit Documentation Feedback Copyright © 1999–2016, Texas Instruments Incorporated Product Folder Links: TPS60130 TPS60131 TPS60132 TPS60133 TPS60130, TPS60131, TPS60132, TPS60133 www.ti.com SLVS258B – NOVEMBER 1999 – REVISED DECEMBER 2016 7 Specifications 7.1 Absolute Maximum Ratings over operating free-air temperature range (unless otherwise noted) (1) MIN MAX UNIT –0.3 5.5 V C1+, C2+ to GND –0.3 VO + 0.3 C1−, C2− to GND –0.3 VI + 0.3 Input voltage, VI (IN, OUT, ENABLE, FB, LBI, LBO/PG) Differential input voltage, VID Continuous total power dissipation V See Dissipation Ratings Continuous output current TPS60130 and TPS60131 400 TPS60132 and TPS60133 200 mA Maximum junction temperature 150 °C Storage temperature, Tstg 150 °C (1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. 7.2 ESD Ratings VALUE Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001 V(ESD) (1) (2) Electrostatic discharge (1) UNIT ±2000 Charged-device model (CDM), per JEDEC specification JESD22-C101 (2) ±1000 Machine model (MM) ±200 V JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process. JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process. 7.3 Recommended Operating Conditions over operating free-air temperature range (unless otherwise noted) MIN VI Input voltage 2.7 IO Output current TJ Operating junction temperature MAX UNIT 5.4 TPS60130 and TPS60131 300 TPS60132 and TPS60133 150 V mA 125 °C 7.4 Thermal Information TPS6013x THERMAL METRIC (1) PWP (HTSSOP) UNIT 20 PINS RθJA Junction-to-ambient thermal resistance RθJC(bot) Junction-to-case (bottom) thermal resistance (1) 178.75 °C/W 3.5 °C/W For more information about traditional and new thermal metrics, see the Semiconductor and IC Package Thermal Metrics application report. Copyright © 1999–2016, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TPS60130 TPS60131 TPS60132 TPS60133 5 TPS60130, TPS60131, TPS60132, TPS60133 SLVS258B – NOVEMBER 1999 – REVISED DECEMBER 2016 www.ti.com 7.5 Electrical Characteristics over operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS VI Input voltage V(UVLO) Input undervoltage lockout threshold IO(MAX) MIN Maximum output current VO TC = 25°C 1.6 MAX V 1.8 V 300 TPS60132 and TPS60133 150 2.7 V < VI < 3 V, 0 < IO < IO(MAX)/2, TC = 0°C to 70°C 4.8 5.2 3 V < VI < 5 V, 0 < IO < IO(MAX) 4.8 5.2 5 V < VI < 5.4 V, 0 < IO < IO(MAX) 4.8 5.25 Output leakage current VI = 3.6 V, V(ENABLE) = 0 V IQ Quiescent current (no-load input current) VI = 3.6 V IQ(SDN) Shutdown supply current VI = 3.6 V, V(ENABLE) = 0 V fOSC(INT) Internal switching frequency VIL Enable input voltage low VI = 2.7 V VIH Enable input voltage high VI = 5.4 V Ilkg(ENABLE) Enable input leakage current V(ENABLE) = VGND or VI Output load regulation VI = 3.8 V, 1 mA