TPS658629IZWSRQ1

TPS658629-Q1 www.ti.com SLVSAT6A – JUNE 2011 – REVISED JUNE 2012 Advanced Power Management Unit Check for Samples: TPS658629-Q1 1 INTRODUCTION 1.1 MAIN FEATURES 1 • Qualified for Automotive Applications • AEC-Q100 Test Guidance With the Following Results: – Device Temperature Grade 3: –40°C to 85°C Ambient Operating Temperature Range – Device HBM ESD Classification Level H1C – Device CDM ESD Classification Level C2 • INTEGRATED POWER SUPPLIES – 3 Programmable Step-Down Converters • Software Controlled Enable/Forced PWM Mode • Automatic Power Saving Mode • Maximum 1.5 A Outputs (SM0 and SM2) • Maximum 1.3 A Output (SM1) – 11 Programmable General Purpose LDOs • 7 With Output Voltages of 1.25V to 3.3V • 2 With Output Voltages of 0.725V to 1.5V or 1.25V to 2.586V (Factory Configurable) • 1 “Always On” With Output Voltages of 1.25V to 3.3V • 1 With Output Voltage of 1.7V–2.475V • DISPLAY SUPPORT FUNCTIONS – 4 PWM Outputs With Programmable Frequency and Duty Cycle – Dual RGB LED Drivers – Constant Current WLED Driver • 26.5V (max) at 25mA • Over-Voltage Protection • Programmable Current Level and Brightness Control 1.3 • HOST INTERFACE – Interrupt Controller With Maskable Interrupts – External ADC Triggering and Step-Down Converter Mode Control • SYSTEM MANAGEMENT – Dual Input Power Path • USB Current Limiting • Max 18V Over-Voltage Protection – Power Good Monitoring on all Supply Outputs – Software Reset Function – Hardware On/Off and Reboot Control – AUTOBOOT Support – 11 Channel ADC With 3 Operating Modes • Single Conversion • Peak Detection • Averaging 1.2 • • APPLICATIONS Portable Navigation Devices Portable Media Players DESCRIPTION The TPS658629-Q1 provides an easy to use, fully integrated solution for handheld devices, integrating multiple regulated power supplies, system management and display functions in a small package. The I2C interface enables control of a wide range of subsystem parameters. Internal registers have a complete set of status information, enabling easy diagnostics and host-controlled handling of fault conditions. To request a full datasheet, please send an e-mail to msapmu_contact@list.ti.com 1 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright © 2011–2012, Texas Instruments Incorporated TPS658629-Q1 SLVSAT6A – JUNE 2011 – REVISED JUNE 2012 1.4 ORDERING INFORMATION (1) TA –40°C to 85°C (1) (2) (3) (4) 2 www.ti.com PART NUMBER (2) (3) TPS658629 PACKAGE (4) PACKAGE DESIGNATOR ORDERING (2) PACKAGE MARKING 169 Pin nFBGA ZWS TPS658629IZWSRQ1 TPS658629I For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI website at www.ti.com. The TPS658629 is only available taped and reeled. Quantities are 1,000 devices per reel. Devices with distinct part numbers have unique factory configurations for supply defaults, sequencing and other functions. Consult the factor for configuration information for each part number. This product is RoHS compatible, including a lead concentration that does not exceed 0.1% of total product weight, and is suitable for use in specified lead-free soldering processes. In addition, this product uses package materials that do not contain halogens, including bromine (Br) or antimony (Sb) above 0.1% of total product weight. ELECTRICAL SPECIFICATIONS Copyright © 2011–2012, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Link(s): TPS658629-Q1 PACKAGE OPTION ADDENDUM www.ti.com 10-Dec-2020 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan (2) Lead finish/ Ball material MSL Peak Temp Op Temp (°C) Device Marking (3) (4/5) (6) TPS658629IZWSRQ1 ACTIVE NFBGA ZWS 169 1000 RoHS & Green SNAGCU Level-3-260C-168 HR -40 to 85 TPS658629I (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of