User's Guide
SLVU893 – June 2013
Using the TPS92075 BUCK Converter
The TPS92075EVM is a 14-W maximum, 120-VAC non-isolated dimmable LED driver whose form factor
intended for A-15, A-19, A-21, A-23, R-20, R-25, R-27, R-30, R-40, PS-25, PS-30, PS-35, BR-30, BR-38,
BR-40, PAR-20, PAR-30, PAR-30L, G-25, G-30, G-40, and other LED bulbs..
Contents
Description ................................................................................................................... 2
Description ................................................................................................................... 2
2.1
Typical Applications ................................................................................................ 2
2.2
TPS92075 Features ............................................................................................... 2
3
Electrical Performance Specifications .................................................................................... 3
4
Schematic .................................................................................................................... 3
5
Performance Data and Typical Characteristic Curves ................................................................. 4
5.1
Efficiency ............................................................................................................ 4
5.2
Line Regulation ..................................................................................................... 5
5.3
Load Regulation .................................................................................................... 5
5.4
Output Ripple ....................................................................................................... 6
5.5
Turn On Waveform ................................................................................................ 6
5.6
Turn Off Waveform ................................................................................................ 7
5.7
Dimming – Lutron Rotary Triac Dimmer at One Position ..................................................... 7
5.8
Dimming – Leviton 6684 Triac Dimmer at Minimum Position ................................................ 8
5.9
Thermal Scans ..................................................................................................... 8
5.10 EMI Scan – 9 LEDs ................................................................................................ 9
5.11 Dimmer Testing .................................................................................................... 9
6
Reference Design, Assembly Drawing, PCB layout, and Bill of Materials ......................................... 10
6.1
Reference Design, Assembly Drawing and PCB Layout .................................................... 10
6.2
Bill of Materials .................................................................................................... 11
Appendix A
Table Data ......................................................................................................... 12
Appendix B
Table Data – Dimmer Testing .................................................................................. 14
Appendix C EVM ................................................................................................................ 17
1
2
List of Figures
1
2
3
4
5
6
7
8
9
10
11
12
13
14
........................................................................................
..................................................................................................
TPS92075 Buck EVM Efficiency ..........................................................................................
TPS92075 Buck EVM Line Regulation ...................................................................................
TPS92075 Buck EVM Load Regulation ..................................................................................
TPS92075 Buck EVM Typical Operation Waveforms, Non-Dimming ...............................................
TPS92075 Buck EVM Start-Up ...........................................................................................
TPS92075 Buck EVM Output Ripple .....................................................................................
Lutron Leading-Edge Rotary Dimmer, Output = 150 mA, VLED = 26 V ...............................................
Leviton Leading-Edge 6684, Output = 20 mA, VLED = 26 V............................................................
Thermal Scan 1 .............................................................................................................
Thermal Scan 2 .............................................................................................................
Conducted EMI Scan, 9 LEDs ............................................................................................
Typical Top Overall View .................................................................................................
TPS92075 Buck EVM Schematic
3
Dimming Wiring Diagram
4
SLVU893 – June 2013
Submit Documentation Feedback
Using the TPS92075 BUCK Converter
Copyright © 2013, Texas Instruments Incorporated
4
5
5
6
6
7
7
8
8
8
9
10
1
Description
www.ti.com
15
TPS92075 Buck EVM Top Layer Assembly Drawing (Top view) ................................................... 10
16
TPS92075 Buck EVM Bottom Assembly Drawing (Bottom view) ................................................... 10
17
EVM Board and LED Bulb................................................................................................ 17
1
TPS92075 Buck REF DESIGN-001 Electrical Performance Specifications ......................................... 3
2
Dimmer Testing
3
Bill of Materials............................................................................................................. 11
List of Tables
1
.............................................................................................................
9
Description
The TPS92075EVM is a 14-W maximum, 120-VAC non-isolated dimmable LED driver whose form factor
is intended for A-15, A-19, A-21, A-23, R-20, R-25, R-27, R-30, R-40, PS-25, PS-30, PS-35, BR-30, BR38, BR-40, PAR-20, PAR-30, PAR-30L, G-25, G-30, G-40, and other LED bulbs.
2
Description
The TPS92075EVM implements a dimming solution using the TPS92075 integrated circuit from Texas
Instruments (TI). The TPS92075 is a hybrid power-factor controller with a built-in phase dimming decoder.
Line cycles are analyzed continuously by an internal low-power digital controller for shape and symmetry.
An analog current reference is then generated and used by the power converter stage to regulate the
output current. The analog reference is manipulated using control algorithms developed to optimize
dimmer compatibility, power factor, and THD.
Using constant off-time control, the solution achieves a low part count, high efficiency and inherently
provides variation in the switching frequency. This variation creates an emulated spread-spectrum effect
easing the converters EMI signature and allowing a smaller input filter.
2.1
Typical Applications
Triac-compatible LED lighting, including forward- and reverse-phase compatibility.
2.2
TPS92075 Features
•
•
•
•
•
•
•
•
•
•
•
•
2
Controlled reference derived Power Factor Correction (PFC)
Integrated digital phase angle decoder
Digital PLL with active 50 Hz, 60 Hz sync
Phase-symmetry balancing
Leading and trailing edge dimmer compatibility
Dimming implemented via an analog reference
Smooth dimming transitions
Overvoltage protection
Output short-circuit protection
Low BOM cost and small PCB footprint
Patent pending digital architecture
6-pin SOT and 8-pin SOIC available
Using the TPS92075 BUCK Converter
SLVU893 – June 2013
Submit Documentation Feedback
Copyright © 2013, Texas Instruments Incorporated
Electrical Performance Specifications
www.ti.com
3
Electrical Performance Specifications
Table 1 presents the electrical performance specifications of the TPS92075 EVM.
Table 1. TPS92075 Buck REF DESIGN-001 Electrical Performance Specifications (1)
Parameter
Test Conditions
MIN
TYP
MAX
Units
90
120
135
V
0.140
A
Input Characteristics
Voltage range
Maximum Input current
Output Characteristics
Output voltage, VOUT
< 15 V with modification
Output voltage regulation
Line Regulation: Input voltage = 90 to 135
15
35
Line Regulation: Input voltage = 100 to 135
V
±7
%
±5
%
Load Regulation: 25- to 30-V change
±1.5
%
120-Hz LED Ripple, Typical
300
mApp
90
kHz
88.1
%
Systems Characteristics
Switching frequency
Peak efficiency
Operating temperature
25
Solution Volume
17
cm3
1.2
W/cm3
Solution Volume per Watt
(1)
4
Based on 14 W maximum
125
ºC
All performance results are for this design configuration only. Many opportunities exist to balance one performance factor for
another in this design.
Schematic
Figure 1 is the EVM schematic, and Figure 2 shows suggested dimming connections.
L1
RL875S-222K
L2
RL875S-222K
LED+
1
2.2mH
160mA
+
F1
L
4
~
3
400V
2
-
SSQ 500
500mA
~
2.2mH
160mA
C2
0.47µF
250V
BR1
RH04-T
C1
0.022µF
250V
C6
0.22µF
250V
R1
220
1W
R3
402k
0.25W
R12
C9
680µF 49.9k
0.1W
35V
STTH1R04U
D2
400V
GND
R4
590k
D4
SMAJ75A-13-F
MMBTA92
Q3
AOU3N60
Q1
DNP
LEDN
L4
GND
MSS1260T-474KLB
470µH
D1
MMSZ4702T1G
15V
R13
0
TPS92075DDC
GND
6
5
4
R5
DNP
C5
0.1µF
25V
COFF
ASNS
VCC
GND
GATE
ISNS
R9
1
R2
20.0k
0.1W
3
C7
4700pF
16V
D3
BZT52C4V7-13-F
GND
U1
GND
C8
220pF
50V
GND
LED-
332k
0.25W
2
GND
FDD6N25TM
Q2
250V
R6
4.99
0.1W
R10
7.68k
0.1W
D5
BAW56-V-GS08
R11
1.00k
0.125W
C10
0.033µF
25V
R7
R8
1.50
1.8
0.125W 0.125W
GND
GND
whitewhitewhitewhiteFor VLED < 15 V, replace R13 with a diode (DFLS1200 or similar) and modify C5 ≥ 22 µF.
Figure 1. TPS92075 Buck EVM Schematic
SLVU893 – June 2013
Submit Documentation Feedback
Using the TPS92075 BUCK Converter
Copyright © 2013, Texas Instruments Incorporated
3
Performance Data and Typical Characteristic Curves
www.ti.com
Triac
Dimmer
PWR541 TPS92075EVM2
L
J3 LED-
AC Source
N
J1
AMP
Meter
L E D Load
J2 LED+
Figure 2. Dimming Wiring Diagram
5
Performance Data and Typical Characteristic Curves
Figure 3 through Figure 12 present typical performance curves for TPS92075 Buck EVM.
Efficiency
Efficiency (%)
5.1
90
Efficiency
85
Buck EVM
35 V LED String
80
30 V LED String
75
25 V LED String
18 V LED String
70
15 V LED String
65
12 V LED String
60
90
100
110
120
130
Input Voltage (VAC)
Figure 3. TPS92075 Buck EVM Efficiency
4
Using the TPS92075 BUCK Converter
SLVU893 – June 2013
Submit Documentation Feedback
Copyright © 2013, Texas Instruments Incorporated
Performance Data and Typical Characteristic Curves
www.ti.com
5.2
Line Regulation
450
Line Reg
Buck EVM
Output Current (mA)
400
350
35 V
300
30 V
25 V
250
18 V
15 V
200
12 V
150
90
100
110
120
130
Input Voltage (VAC)
Figure 4. TPS92075 Buck EVM Line Regulation
Load Regulation
Output Current (mA)
5.3
500
Load Reg
450
Buck EVM
400
Load Reg
350
300
250
200
150
100
10
15
20
25
30
35
LED Stack Voltage
Figure 5. TPS92075 Buck EVM Load Regulation
SLVU893 – June 2013
Submit Documentation Feedback
Using the TPS92075 BUCK Converter
Copyright © 2013, Texas Instruments Incorporated
5
Performance Data and Typical Characteristic Curves
5.4
www.ti.com
Output Ripple
4
3
1
CH1: FET Q2 Source CH3: Input Current CH4: LED Current
whitewhitewhitewhitewhitewhitewhiOutput Ripple (VOUT: 26.2 V, IOUT 380 mA, THD 13.8%)
Figure 6. TPS92075 Buck EVM Typical Operation Waveforms, Non-Dimming
5.5
Turn On Waveform
Figure 7. TPS92075 Buck EVM Start-Up
6
Using the TPS92075 BUCK Converter
SLVU893 – June 2013
Submit Documentation Feedback
Copyright © 2013, Texas Instruments Incorporated
Performance Data and Typical Characteristic Curves
www.ti.com
5.6
Turn Off Waveform
Figure 8. TPS92075 Buck EVM Output Ripple
5.7
Dimming – Lutron Rotary Triac Dimmer at One Position
4
3
1
Ch1: FET Q2 Source CH3: Input Current CH4: LED Current
Figure 9. Lutron Leading-Edge Rotary Dimmer, Output = 150 mA, VLED = 26 V
SLVU893 – June 2013
Submit Documentation Feedback
Using the TPS92075 BUCK Converter
Copyright © 2013, Texas Instruments Incorporated
7
Performance Data and Typical Characteristic Curves
5.8
www.ti.com
Dimming – Leviton 6684 Triac Dimmer at Minimum Position
4
3
1
CH1: FET Q2 Source CH3: Input Current CH4: LED Current
Figure 10. Leviton Leading-Edge 6684, Output = 20 mA, VLED = 26 V
5.9
Thermal Scans
20-Minutes Soak, 9-LED Load,
Top View,
Hottest Point in Box: 74.7°C
Figure 11. Thermal Scan 1
8
20-Minutes Soak, 9-LED Load,
Bottom View,
Hottest Point in Box: 58.6°C
Figure 12. Thermal Scan 2
Using the TPS92075 BUCK Converter
SLVU893 – June 2013
Submit Documentation Feedback
Copyright © 2013, Texas Instruments Incorporated
Performance Data and Typical Characteristic Curves
www.ti.com
5.10 EMI Scan – 9 LEDs
Figure 13. Conducted EMI Scan, 9 LEDs
5.11 Dimmer Testing
Table 2. Dimmer Testing
Make
Model
Flicker-Free
NEMA SSL6 Curve
Decora
RP106
Y
Y
Decora
6631
Y
Y
Leviton
6683
Y
Y
DIVA
DV-600PR-LA
Y
Y
Diva
DVELV-303P
Y
Y
Leviton
6161
Y
Y
Abella
AB-600
Y
Y
Skylark
S-600P
Y
Y
Leviton Trimatron
6684
Y
Y
Lyneo Lx
LX-600-PL
Y
Y
Lyneo Lx
LXLV-600PL-WH
Y
Y
Skylark
S-600
Y
Y
Ariadni
AYLV-600P
Y
Y
Ariadni
AY-600PNL
Y
Y
See Appendix A for a complete summary of results by individual dimmer.
SLVU893 – June 2013
Submit Documentation Feedback
Using the TPS92075 BUCK Converter
Copyright © 2013, Texas Instruments Incorporated
9
Reference Design, Assembly Drawing, PCB layout, and Bill of Materials
www.ti.com
6
Reference Design, Assembly Drawing, PCB layout, and Bill of Materials
6.1
Reference Design, Assembly Drawing and PCB Layout
Figure 14. Typical Top Overall View
Figure 15 and Figure 16 show the design of the TPS92075 Buck EVM printed-circuit board.
Figure 15. TPS92075 Buck EVM Top Layer Assembly Drawing (Top view)
Figure 16. TPS92075 Buck EVM Bottom Assembly Drawing (Bottom view)
10
Using the TPS92075 BUCK Converter
SLVU893 – June 2013
Submit Documentation Feedback
Copyright © 2013, Texas Instruments Incorporated
Reference Design, Assembly Drawing, PCB layout, and Bill of Materials
www.ti.com
6.2
Bill of Materials
Table 3 is the BOM for this EVM.
Table 3. Bill of Materials
Ref
Qty
Description
Manufacturer
PartNumber
BR1
1
Diode, Switching-Bridge, 400V, 0.5A, MiniDip
Diodes Inc
RH04-T
C1
1
Cap, Film, 0.022uF, 250VDC, 5%, Radial
EPCOS Inc
B32529C3223J
C2
1
Cap, Film, 0.47uF, 250VDC, 10%, Radial
EPCOS Inc
B32521C3474K
C5
1
CAP, CERM, 0.1uF, 25V, +/-10%, X7R, 0603
TDK
C1608X7R1E104K
C6
1
CAP, Film, 0.22uF, 250VDC, 5%, Radial
EPCOS Inc
B32529D3224J
C7
1
CAP, CERM, 4700pF, 16V, X7R, 10%, 0603
Kemet
C0603C472K4RACTU
C8
1
CAP, CERM, 220pF, 50V, +/-5%, C0G/NP0, 0603
MuRata
GRM1885C1H221JA01D
C9
1
CAP, Alum, 680uF, 35V, +/-20%, Radial
Panasonic
EEU-FR1V681
C10
1
CAP, CERM, 0.033uF, 25V, X7R, 20%, 0603
TDK Corporation
C1608X7R1E333M
D1
1
Diode, Zener, 15V, 500mW, SOD-123
ON Semiconductor
MMSZ4702T1G
D2
1
Diode, Ultra Fast, 400V, 1A, SMB
STMicroelectronics
STTH1R04U
D3
1
Diode, Zener, 4.7V, 500mW, SOD-123
Diodes Inc
BZT52C4V7-13-F
D4
1
Diode, TVS, 75V, 400W, SMA
Diodes Inc
SMAJ75A-13-F
D5
1
Diode, Sw Dual, 75V, 350mW, SOT23
Vishay
BAW56-V-GS08
F1
1
Fuse, Fast SSQ, 500mA, 125V, Radial
Bel Fuse Inc
SSQ 500
L1, L2
2
Inductor, 2.2mH, 0.16A, 7.56 ohm, Radial
Bourns Inc.
RL875S-222K
L4
1
Inductor, 470uH, 0.96A, 0.72 ohm, SMD
Coilcraft
MSS1260T-474KLB
Q1
1
MOSFET, N-CH, 600V, 2.5A, IPAK
A & O Semi Inc
AOU3N60
Q2
1
MOSFET, N-CH, 250V, 4.4A, DPAK
Fairchild
FDD6N25TM
Q3
1
Transistor, PNP, 300V, 0.2A, SOT-23
Fairchild
MMBTA92
R1
1
RES, 220 ohm, 5%, 1W, 2512
Vishay
CRCW2512220RJNEG
R2
1
RES, 20.0k ohm, 1%, 0.1W, 0603
Vishay-Dale
CRCW060320K0FKEA
R3
1
RES, 402k ohm, 1%, 0.25W, 1206
Vishay-Dale
CRCW1206402KFKEA
R4
1
RES, 590k ohm, 1%, 0.1W, 0603
Vishay-Dale
CRCW0603590KFKEA
R6
1
RES, 4.99 ohm, 1%, 0.1W, 0603
Vishay-Dale
CRCW06034R99FKEA
R7
1
RES, 1.8 ohm, 5%, 0.125W, 0805
Vishay-Dale
CRCW08051R80JNEA
R8
1
RES, 1.50 ohm, 1%, 0.125W, 0805
Vishay-Dale
CRCW08051R50FKEA
R9
1
RES, 332k ohm, 1%, 0.25W, 1206
Vishay-Dale
CRCW1206332KFKEA
R10
1
RES, 7.68k ohm, 1%, 0.1W, 0603
Vishay-Dale
CRCW06037K68FKEA
R11
1
RES, 1.00k ohm, 1%, 0.125W, 0805
Vishay-Dale
CRCW08051K00FKEA
R12
1
RES, 49.9k ohm, 1%, 0.1W, 0603
Vishay-Dale
CRCW060349K9FKEA
R13
1
RES, 0 ohm, 5%, 0.1W, 0603
Vishay-Dale
CRCW06030000Z0EA
U1
1
LED Driver
Texas Instruments
TPS92075DDC
Total
34
Hardware for EVM
H1,
H2,
H3, H4
4
Machine Screw, Round, #4-40 x 1/4, Nylon, Philips panhead
B&F Fastener Supply
NY PMS 440 0025 PH
H5,
H6,
H7, H8
4
Standoff, Hex, 0.5"L #4-40 Nylon
Keystone
1902C
J1
1
Conn Term Block, 2POS, 5.08mm PCB
Phoenix Contact
1715721
J2,J3,
TP1,T
P2
4
Terminal, Turret, TH, Double
Keystone
1502-2
J4, J5,
J6, J7
4
Jumper Wire, 300mil spacing, Orange, pkg of 200
3M
923345-03-C
Not Populated
R5
0
RES, 280k ohm, 1%, 0.125W, 0805
Vishay-Dale
CRCW0805280KFKEA
RV1
0
Varistor, 130VAC, 170VDC, 6J, 5mm, Radial
Panasonic Electronic Components
ERZ-V05D201
SLVU893 – June 2013
Submit Documentation Feedback
Using the TPS92075 BUCK Converter
Copyright © 2013, Texas Instruments Incorporated
11
www.ti.com
Appendix A Table Data
POUT Eff = Efficiency Calculated using POUT = POUT reading on power meter
Calc POUT Eff = Efficiency Calculated using POUT = VOUT × IOUT
Test Data ~12 V LED Load
Input Measurement
Load Measurement
Calculation
Vin
(Vrms)
Iin
(mArms)
Pin (W)
PF
%ATHD
Vout
(Vdc)
Iout
(mAdc)
Pout (W)
Pout Eff
(%)
Pout
Calc (W)
Calc
Pout Eff
(%)
Loss (W)
1.02
90
0.059
5.2
0.974
18.77
12.1
340
4.18
80.4
4.1
79.1
100
0.056
5.4
0.967
18.03
12.1
355
4.37
80.9
4.3
79.5
1.03
120
0.052
5.9
0.944
19.28
12.2
379.8
4.69
79.5
4.6
78.5
1.21
135
0.05
6.2
0.919
22.22
12.2
394.2
4.88
78.7
4.8
77.6
1.32
Test Data ~15 V LED Load
Input Measurement
Load Measurement
Calculation
Vin
(Vrms)
Iin
(mArms)
Pin (W)
PF
%ATHD
Vout
(Vdc)
Iout
(mAdc)
Pout (W)
Pout Eff
(%)
Pout
Calc (W)
Calc
Pout Eff
(%)
Loss (W)
90
0.075
6.7
0.987
15.66
15.1
364.6
5.56
83.0
5.5
82.2
1.14
100
0.07
6.9
0.986
13.8
15.1
376.3
5.75
83.3
5.7
82.3
1.15
120
0.063
7.3
0.969
15.83
15.18
393.5
6.03
82.6
6.0
81.8
1.27
135
0.06
7.7
0.951
17.53
15.2
408.5
6.26
81.3
6.2
80.6
1.44
Vout
(Vdc)
Iout
(mAdc)
Pout
Meas
(W)
Pout Eff
(%)
Pout
Calc (W)
Calc
Pout Eff
(%)
Loss (W)
Test Data ~18 V LED Load
Input Measurement
Load Measurement
Vin
(Vrms)
Iin
(mArms)
Pin (W)
PF
%ATHD
Calculation
90
0.087
7.7
0.987
15.92
18
360
6.56
85.2
6.5
84.2
1.14
100
0.08
7.9
0.987
14.9
18.1
368
6.71
84.9
6.7
84.3
1.19
120
0.072
8.4
0.98
13.94
18.1
387
7.07
84.2
7.0
83.4
1.33
135
0.068
8.9
0.969
15.18
18.2
404.1
7.41
83.3
7.4
82.6
1.49
Test Data ~25 V LED Load
Input Measurement
Load Measurement
Calculation
Vin
(Vrms)
Iin
(mArms)
Pin (W)
PF
%THD
Vout
(Vdc)
Iout
(mAdc)
Pout
Meas
(W)
Pout Eff
(%)
Pout
Calc (W)
Calc
Pout Eff
(%)
Loss (W)
90
0.107
9.5
0.983
18.71
23.8
341.2
8.17
86.0
8.1
85.5
1.33
100
0.1
9.8
0.986
16.84
23.9
354
8.5
86.7
8.5
86.3
1.3
120
0.088
10.5
0.987
13.62
23.94
373.9
9
85.7
9.0
85.2
1.5
135
0.083
11.1
0.983
12.87
24
391.6
9.45
85.1
9.4
84.7
1.65
Test Data ~30 V LED Load
Input Measurement
Load Measurement
Vin
(Vrms)
Iin
(mArms)
Pin (W)
PF
%THD
Vout
(Vdc)
Iout
(mAdc)
Pout
Meas
(W)
Pout Eff
(%)
Calculation
Pout
Calc (W)
Calc
Pout Eff
(%)
Loss (W)
90
0.128
11.3
0.973
23.45
29.7
330.9
9.86
87.3
9.8
87.0
1.44
100
0.118
11.5
0.979
21.04
29.7
339.2
10.1
87.8
10.1
87.6
1.4
120
0.105
12.4
0.986
16.26
29.8
363.6
10.9
87.9
10.8
87.4
1.5
135
0.1
13.3
0.989
13.6
29.9
386
11.6
87.2
11.5
86.8
1.7
white text
12
Table Data
SLVU893 – June 2013
Submit Documentation Feedback
Copyright © 2013, Texas Instruments Incorporated
Appendix A
www.ti.com
white text
Test Data ~35 V LED Load
Input Measurement
Load Measurement
Calculation
Vin
(Vrms)
Iin
(mArms)
Pin (W)
PF
%THD
Vout
(Vdc)
Iout
(mAdc)
Pout
Meas
(W)
Pout Eff
(%)
Pout
Calc (W)
Calc
Pout Eff
(%)
Loss (W)
90
0.143
12.5
0.962
28.16
35.3
308.2
10.9
87.2
10.9
87.0
1.6
100
0.136
13.3
0.972
23.7
35.4
330
11.7
88.0
11.7
87.8
1.6
120
0.122
14.3
0.984
17.96
35.5
354.4
12.6
88.1
12.6
88.0
1.7
135
0.113
15.1
0.989
14.6
35.6
371.7
13.3
88.1
13.2
87.6
1.8
SLVU893 – June 2013
Submit Documentation Feedback
Table Data
Copyright © 2013, Texas Instruments Incorporated
13
www.ti.com
Appendix B Table Data – Dimmer Testing
7 LED Load
Dimmer: Lutron
NonDim Max-->
381
Maestro Duo
MAW-600H-LA
Input Voltage
Output Current
% Output Current
Input Power
Output Voltage
25.8
27.4
7.19
0.71
18.9
50.6
118.4
31.08
3.35
19.9
69.7
163.1
42.81
4.7
20.1
89.4
213.8
56.12
6.02
20.4
112.3
300
78.74
7.82
20.8
Dimmer: L*
NonDim Max-->
381
Decora
RP106
Input Voltage
Output Current
% Output Current
Input Power
Output Voltage
17.9
8.9
2.34
0.048
17.5
50
76.4
20.05
2.33
19.5
70.7
129.6
34.02
3.89
19.9
90.5
204.5
53.67
5.8
20.3
118.5
350
91.86
8.74
20.9
Dimmer: L*
NonDim Max-->
381
Skylark Contour
CTCL-153PDH
Input Voltage
Output Current
% Output Current
Input Power
Output Voltage
25.4
19.2
5.04
0.586
18.7
50.6
107.1
28.11
3.07
19.6
70.7
153.4
40.26
4.47
20.1
90
202
53.02
5.76
20.3
111.1
280
73.49
7.38
20.7
Dimmer: Leviton
NonDim Max-->
381
Decora
6631
Input Voltage
Output Current
% Output Current
Input Power
Output Voltage
18.80
3.35
0.88
0.10
17.80
50.30
107.50
28.22
3.07
19.80
70.40
153.40
40.26
4.47
20.10
90.60
205.60
53.96
5.83
20.40
114.50
302.30
79.34
7.77
20.80
Dimmer: Leviton
NonDim Max-->
381
Leviton
6683
Input Voltage
Output Current
% Output Current
Input Power
Output Voltage
17.40
0.28
0.07
0.03
17.10
50.50
106.30
27.90
3.06
19.80
70.20
151.90
39.87
4.44
20.10
90.60
204.40
53.65
5.81
20.40
118.80
341.70
89.69
11.70
29.70
Dimmer: Lutron
NonDim Max-->
381
DIVA
DV-600PR-LA
Input Voltage
Output Current
% Output Current
Input Power
Output Voltage
28.00
32.20
8.45
0.91
19.00
50.30
108.80
28.56
3.11
19.80
70.10
154.10
40.45
4.47
20.10
90.10
205.10
53.83
5.83
20.40
112.60
290.00
76.12
7.54
20.60
white text
white text
14
Table Data – Dimmer Testing
SLVU893 – June 2013
Submit Documentation Feedback
Copyright © 2013, Texas Instruments Incorporated
Appendix B
www.ti.com
white text
Dimmer: Lutron
NonDim Max-->
381
Diva
DVELV-303P
Input Voltage
Output Current
% Output Current
Input Power
Output Voltage
31.10
49.70
13.04
1.22
19.20
50.00
124.20
32.60
3.07
19.90
70.10
180.70
47.43
4.47
20.30
90.40
236.80
62.15
5.88
20.50
112.10
303.00
79.5
3 7.53
20.80
Dimmer: Leviton
NonDim Max-->
381
Leviton
6161
Input Voltage
Output Current
% Output Current
Input Power
Output Voltage
22.87
21.80
5.72
0.50
18.60
38.40
74.00
19.42
2.06
19.50
53.20
121.90
31.99
3.47
19.90
83.00
192.80
50.60
5.51
20.30
114.40
306.10
80.34
7.87
20.80
Dimmer: Lutron
NonDim Max-->
381
Abella
AB-600
Input Voltage
Output Current
% Output Current
Input Power
Output Voltage
30.10
42.30
11.10
1.07
19.10
46.70
113.20
29.71
3.15
19.80
70.10
169.80
44.57
4.86
20.20
91.60
226.70
59.50
6.37
20.50
110.60
298.00
78.22
7.88
20.80
Dimmer: Lutron
NonDim Max-->
381
Skylark
S-600P
Input Voltage
Output Current
% Output Current
Input Power
Output Voltage
25.00
2.30
0.60
0.12
25.40
50.50
90.40
23.73
3.36
27.90
70.80
143.80
37.74
5.42
28.40
90.20
194.60
51.08
7.22
28.90
111.70
275.20
72.23
9.70
29.40
Dimmer: Leviton
NonDim Max-->
381
Trimatron
6684
Input Voltage
Output Current
% Output Current
Input Power
Output Voltage
27.40
10.70
2.81
0.42
26.20
50.40
88.00
23.10
3.28
27.80
70.40
142.20
37.32
5.35
28.40
90.40
194.60
51.08
7.24
28.80
118.70
339.80
89.19
11.60
29.70
Dimmer: Lutron
NonDim Max-->
381
Lyneo Lx
LX-600-PL
Input Voltage
Output Current
% Output Current
Input Power
Output Voltage
36.20
28.70
7.53
1.13
26.80
50.40
86.50
22.70
3.21
27.80
70.00
141.50
37.14
5.30
28.40
90.70
196.00
51.44
7.25
28.80
114.70
294.40
77.27
10.22
29.40
white text
white text
white text
white text
white text
SLVU893 – June 2013
Submit Documentation Feedback
Table Data – Dimmer Testing
Copyright © 2013, Texas Instruments Incorporated
15
Appendix B
www.ti.com
white text
white text
16
Dimmer: Lutron
NonDim Max-->
381
Lyneo Lx
LXLV-600PL-WH
Input Voltage
Output Current
% Output Current
Input Power
Output Voltage
26.401
8.20
2.15
0.31
26.10
50.70
92.10
24.17
3.42
27.90
70.20
143.20
37.59
5.38
28.40
90.00
195.10
51.21
7.23
28.80
112.00
277.80
72.91
9.76
29.40
Dimmer: Lutron
NonDim Max-->
381
Skylark
S-600
Input Voltage
Output Current
% Output Current
Input Power
Output Voltage
23.70
0.14
0.04
43.10
24.20
50.10
86.00
22.57
3.20
27.80
70.10
141.00
37.01
5.29
28.40
90.40
194.20
50.97
7.20
28.80
110.10
266.50
69.95
9.43
29.30
Dimmer: Lutron
NonDim Max-->
381
Ariadni
AYLV-600P
Input Voltage
Output Current
% Output Current
Input Power
Output Voltage
25.70
5.93
1.56
0.23
26.00
50.40
89.30
23.44
3.33
27.90
70.00
142.70
37.45
5.38
28.40
90.20
196.00
51.44
7.28
28.90
111.70
276.10
72.47
9.73
29.40
Dimmer: Lutron
NonDim Max-->
381
Ariadni
AY-600PNL
Input Voltage
Output Current
% Output Current
Input Power
Output Voltage
29.207
14.10
3.70
0.55
26.40
50.00
88.20
23.15
3.29
27.90
70.80
144.70
37.98
5.44
28.50
90.80
197.20
51.76
7.33
28.90
113.00
283.00
74.28
9.97
29.50
Table Data – Dimmer Testing
SLVU893 – June 2013
Submit Documentation Feedback
Copyright © 2013, Texas Instruments Incorporated
www.ti.com
Appendix C EVM
Figure 17 illustrates the EVM board and an LED light as a size reference.
Figure 17. EVM Board and LED Bulb
SLVU893 – June 2013
Submit Documentation Feedback
EVM
Copyright © 2013, Texas Instruments Incorporated
17
EVALUATION BOARD/KIT/MODULE (EVM) ADDITIONAL TERMS
Texas Instruments (TI) provides the enclosed Evaluation Board/Kit/Module (EVM) under the following conditions:
The user assumes all responsibility and liability for proper and safe handling of the goods. Further, the user indemnifies TI from all claims
arising from the handling or use of the goods.
Should this evaluation board/kit not meet the specifications indicated in the User’s Guide, the board/kit may be returned within 30 days from
the date of delivery for a full refund. THE FOREGOING LIMITED WARRANTY IS THE EXCLUSIVE WARRANTY MADE BY SELLER TO
BUYER AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED, IMPLIED, OR STATUTORY, INCLUDING ANY WARRANTY OF
MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. EXCEPT TO THE EXTENT OF THE INDEMNITY SET FORTH
ABOVE, NEITHER PARTY SHALL BE LIABLE TO THE OTHER FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES.
Please read the User's Guide and, specifically, the Warnings and Restrictions notice in the User's Guide prior to handling the product. This
notice contains important safety information about temperatures and voltages. For additional information on TI's environmental and/or safety
programs, please visit www.ti.com/esh or contact TI.
No license is granted under any patent right or other intellectual property right of TI covering or relating to any machine, process, or
combination in which such TI products or services might be or are used. TI currently deals with a variety of customers for products, and
therefore our arrangement with the user is not exclusive. TI assumes no liability for applications assistance, customer product design,
software performance, or infringement of patents or services described herein.
REGULATORY COMPLIANCE INFORMATION
As noted in the EVM User’s Guide and/or EVM itself, this EVM and/or accompanying hardware may or may not be subject to the Federal
Communications Commission (FCC) and Industry Canada (IC) rules.
For EVMs not subject to the above rules, this evaluation board/kit/module is intended for use for ENGINEERING DEVELOPMENT,
DEMONSTRATION OR EVALUATION PURPOSES ONLY and is not considered by TI to be a finished end product fit for general consumer
use. It generates, uses, and can radiate radio frequency energy and has not been tested for compliance with the limits of computing
devices pursuant to part 15 of FCC or ICES-003 rules, which are designed to provide reasonable protection against radio frequency
interference. Operation of the equipment may cause interference with radio communications, in which case the user at his own expense will
be required to take whatever measures may be required to correct this interference.
General Statement for EVMs including a radio
User Power/Frequency Use Obligations: This radio is intended for development/professional use only in legally allocated frequency and
power limits. Any use of radio frequencies and/or power availability of this EVM and its development application(s) must comply with local
laws governing radio spectrum allocation and power limits for this evaluation module. It is the user’s sole responsibility to only operate this
radio in legally acceptable frequency space and within legally mandated power limitations. Any exceptions to this are strictly prohibited and
unauthorized by Texas Instruments unless user has obtained appropriate experimental/development licenses from local regulatory
authorities, which is responsibility of user including its acceptable authorization.
For EVMs annotated as FCC – FEDERAL COMMUNICATIONS COMMISSION Part 15 Compliant
Caution
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the
equipment.
FCC Interference Statement for Class A EVM devices
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the interference at his own expense.
FCC Interference Statement for Class B EVM devices
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
For EVMs annotated as IC – INDUSTRY CANADA Compliant
This Class A or B digital apparatus complies with Canadian ICES-003.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the
equipment.
Concerning EVMs including radio transmitters
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this
device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired
operation of the device.
Concerning EVMs including detachable antennas
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain
approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should
be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.
This radio transmitter has been approved by Industry Canada to operate with the antenna types listed in the user guide with the maximum
permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain
greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.
Cet appareil numérique de la classe A ou B est conforme à la norme NMB-003 du Canada.
Les changements ou les modifications pas expressément approuvés par la partie responsable de la conformité ont pu vider l’autorité de
l'utilisateur pour actionner l'équipement.
Concernant les EVMs avec appareils radio
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est
autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout
brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
Concernant les EVMs avec antennes détachables
Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain
maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à
l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente
(p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante.
Le présent émetteur radio a été approuvé par Industrie Canada pour fonctionner avec les types d'antenne énumérés dans le manuel
d’usage et ayant un gain admissible maximal et l'impédance requise pour chaque type d'antenne. Les types d'antenne non inclus dans
cette liste, ou dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour l'exploitation de l'émetteur.
SPACER
SPACER
SPACER
SPACER
SPACER
SPACER
SPACER
SPACER
【Important Notice for Users of this Product in Japan】
】
This development kit is NOT certified as Confirming to Technical Regulations of Radio Law of Japan
If you use this product in Japan, you are required by Radio Law of Japan to follow the instructions below with respect to this product:
1.
2.
3.
Use this product in a shielded room or any other test facility as defined in the notification #173 issued by Ministry of Internal Affairs and
Communications on March 28, 2006, based on Sub-section 1.1 of Article 6 of the Ministry’s Rule for Enforcement of Radio Law of
Japan,
Use this product only after you obtained the license of Test Radio Station as provided in Radio Law of Japan with respect to this
product, or
Use of this product only after you obtained the Technical Regulations Conformity Certification as provided in Radio Law of Japan with
respect to this product. Also, please do not transfer this product, unless you give the same notice above to the transferee. Please note
that if you could not follow the instructions above, you will be subject to penalties of Radio Law of Japan.
Texas Instruments Japan Limited
(address) 24-1, Nishi-Shinjuku 6 chome, Shinjuku-ku, Tokyo, Japan
http://www.tij.co.jp
【ご使用にあたっての注】
本開発キットは技術基準適合証明を受けておりません。
本製品のご使用に際しては、電波法遵守のため、以下のいずれかの措置を取っていただく必要がありますのでご注意ください。
1.
2.
3.
電波法施行規則第6条第1項第1号に基づく平成18年3月28日総務省告示第173号で定められた電波暗室等の試験設備でご使用いただく。
実験局の免許を取得後ご使用いただく。
技術基準適合証明を取得後ご使用いただく。
なお、本製品は、上記の「ご使用にあたっての注意」を譲渡先、移転先に通知しない限り、譲渡、移転できないものとします。
上記を遵守頂けない場合は、電波法の罰則が適用される可能性があることをご留意ください。
日本テキサス・インスツルメンツ株式会社
東京都新宿区西新宿６丁目２４番１号
西新宿三井ビル
http://www.tij.co.jp
SPACER
SPACER
SPACER
SPACER
SPACER
SPACER
SPACER
SPACER
SPACER
SPACER
SPACER
SPACER
SPACER
SPACER
SPACER
SPACER
SPACER
EVALUATION BOARD/KIT/MODULE (EVM)
WARNINGS, RESTRICTIONS AND DISCLAIMERS
For Feasibility Evaluation Only, in Laboratory/Development Environments. Unless otherwise indicated, this EVM is not a finished
electrical equipment and not intended for consumer use. It is intended solely for use for preliminary feasibility evaluation in
laboratory/development environments by technically qualified electronics experts who are familiar with the dangers and application risks
associated with handling electrical mechanical components, systems and subsystems. It should not be used as all or part of a finished end
product.
Your Sole Responsibility and Risk. You acknowledge, represent and agree that:
1.
2.
3.
4.
You have unique knowledge concerning Federal, State and local regulatory requirements (including but not limited to Food and Drug
Administration regulations, if applicable) which relate to your products and which relate to your use (and/or that of your employees,
affiliates, contractors or designees) of the EVM for evaluation, testing and other purposes.
You have full and exclusive responsibility to assure the safety and compliance of your products with all such laws and other applicable
regulatory requirements, and also to assure the safety of any activities to be conducted by you and/or your employees, affiliates,
contractors or designees, using the EVM. Further, you are responsible to assure that any interfaces (electronic and/or mechanical)
between the EVM and any human body are designed with suitable isolation and means to safely limit accessible leakage currents to
minimize the risk of electrical shock hazard.
You will employ reasonable safeguards to ensure that your use of the EVM will not result in any property damage, injury or death, even
if the EVM should fail to perform as described or expected.
You will take care of proper disposal and recycling of the EVM’s electronic components and packing materials.
Certain Instructions. It is important to operate this EVM within TI’s recommended specifications and environmental considerations per the
user guidelines. Exceeding the specified EVM ratings (including but not limited to input and output voltage, current, power, and
environmental ranges) may cause property damage, personal injury or death. If there are questions concerning these ratings please contact
a TI field representative prior to connecting interface electronics including input power and intended loads. Any loads applied outside of the
specified output range may result in unintended and/or inaccurate operation and/or possible permanent damage to the EVM and/or
interface electronics. Please consult the EVM User's Guide prior to connecting any load to the EVM output. If there is uncertainty as to the
load specification, please contact a TI field representative. During normal operation, some circuit components may have case temperatures
greater than 60°C as long as the input and output are maintained at a normal ambient operating temperature. These components include
but are not limited to linear regulators, switching transistors, pass transistors, and current sense resistors which can be identified using the
EVM schematic located in the EVM User's Guide. When placing measurement probes near these devices during normal operation, please
be aware that these devices may be very warm to the touch. As with all electronic evaluation tools, only qualified personnel knowledgeable
in electronic measurement and diagnostics normally found in development environments should use these EVMs.
Agreement to Defend, Indemnify and Hold Harmless. You agree to defend, indemnify and hold TI, its licensors and their representatives
harmless from and against any and all claims, damages, losses, expenses, costs and liabilities (collectively, "Claims") arising out of or in
connection with any use of the EVM that is not in accordance with the terms of the agreement. This obligation shall apply whether Claims
arise under law of tort or contract or any other legal theory, and even if the EVM fails to perform as described or expected.
Safety-Critical or Life-Critical Applications. If you intend to evaluate the components for possible use in safety critical applications (such
as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, such as devices
which are classified as FDA Class III or similar classification, then you must specifically notify TI of such intent and enter into a separate
Assurance and Indemnity Agreement.
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2013, Texas Instruments Incorporated
STANDARD TERMS AND CONDITIONS FOR EVALUATION MODULES
1.
Delivery: TI delivers TI evaluation boards, kits, or modules, including any accompanying demonstration software, components, or
documentation (collectively, an “EVM” or “EVMs”) to the User (“User”) in accordance with the terms and conditions set forth herein.
Acceptance of the EVM is expressly subject to the following terms and conditions.
1.1 EVMs are intended solely for product or software developers for use in a research and development setting to facilitate feasibility
evaluation, experimentation, or scientific analysis of TI semiconductors products. EVMs have no direct function and are not
finished products. EVMs shall not be directly or indirectly assembled as a part or subassembly in any finished product. For
clarification, any software or software tools provided with the EVM (“Software”) shall not be subject to the terms and conditions
set forth herein but rather shall be subject to the applicable terms and conditions that accompany such Software
1.2 EVMs are not intended for consumer or household use. EVMs may not be sold, sublicensed, leased, rented, loaned, assigned,
or otherwise distributed for commercial purposes by Users, in whole or in part, or used in any finished product or production
system.
2
Limited Warranty and Related Remedies/Disclaimers:
2.1 These terms and conditions do not apply to Software. The warranty, if any, for Software is covered in the applicable Software
License Agreement.
2.2 TI warrants that the TI EVM will conform to TI's published specifications for ninety (90) days after the date TI delivers such EVM
to User. Notwithstanding the foregoing, TI shall not be liable for any defects that are caused by neglect, misuse or mistreatment
by an entity other than TI, including improper installation or testing, or for any EVMs that have been altered or modified in any
way by an entity other than TI. Moreover, TI shall not be liable for any defects that result from User's design, specifications or
instructions for such EVMs. Testing and other quality control techniques are used to the extent TI deems necessary or as
mandated by government requirements. TI does not test all parameters of each EVM.
2.3 If any EVM fails to conform to the warranty set forth above, TI's sole liability shall be at its option to repair or replace such EVM,
or credit User's account for such EVM. TI's liability under this warranty shall be limited to EVMs that are returned during the
warranty period to the address designated by TI and that are determined by TI not to conform to such warranty. If TI elects to
repair or replace such EVM, TI shall have a reasonable time to repair such EVM or provide replacements. Repaired EVMs shall
be warranted for the remainder of the original warranty period. Replaced EVMs shall be warranted for a new full ninety (90) day
warranty period.
3
Regulatory Notices:
3.1 United States
3.1.1
Notice applicable to EVMs not FCC-Approved:
This kit is designed to allow product developers to evaluate electronic components, circuitry, or software associated with the kit
to determine whether to incorporate such items in a finished product and software developers to write software applications for
use with the end product. This kit is not a finished product and when assembled may not be resold or otherwise marketed unless
all required FCC equipment authorizations are first obtained. Operation is subject to the condition that this product not cause
harmful interference to licensed radio stations and that this product accept harmful interference. Unless the assembled kit is
designed to operate under part 15, part 18 or part 95 of this chapter, the operator of the kit must operate under the authority of
an FCC license holder or must secure an experimental authorization under part 5 of this chapter.
3.1.2
For EVMs annotated as FCC – FEDERAL COMMUNICATIONS COMMISSION Part 15 Compliant:
CAUTION
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to
operate the equipment.
FCC Interference Statement for Class A EVM devices
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to
correct the interference at his own expense.
SPACER
SPACER
SPACER
SPACER
SPACER
SPACER
SPACER
SPACER
FCC Interference Statement for Class B EVM devices
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
3.2 Canada
3.2.1
For EVMs issued with an Industry Canada Certificate of Conformance to RSS-210
Concerning EVMs Including Radio Transmitters:
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may
cause undesired operation of the device.
Concernant les EVMs avec appareils radio:
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation
est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit
accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
Concerning EVMs Including Detachable Antennas:
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser)
gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type
and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for
successful communication. This radio transmitter has been approved by Industry Canada to operate with the antenna types
listed in the user guide with the maximum permissible gain and required antenna impedance for each antenna type indicated.
Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited
for use with this device.
Concernant les EVMs avec antennes détachables
Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et
d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage
radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope
rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante. Le
présent émetteur radio a été approuvé par Industrie Canada pour fonctionner avec les types d'antenne énumérés dans le
manuel d’usage et ayant un gain admissible maximal et l'impédance requise pour chaque type d'antenne. Les types d'antenne
non inclus dans cette liste, ou dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour l'exploitation de
l'émetteur
3.3 Japan
3.3.1
Notice for EVMs delivered in Japan: Please see http://www.tij.co.jp/lsds/ti_ja/general/eStore/notice_01.page 日本国内に
輸入される評価用キット、ボードについては、次のところをご覧ください。
http://www.tij.co.jp/lsds/ti_ja/general/eStore/notice_01.page
3.3.2
Notice for Users of EVMs Considered “Radio Frequency Products” in Japan: EVMs entering Japan may not be certified
by TI as conforming to Technical Regulations of Radio Law of Japan.
If User uses EVMs in Japan, not certified to Technical Regulations of Radio Law of Japan, User is required by Radio Law of
Japan to follow the instructions below with respect to EVMs:
1.
2.
3.
Use EVMs in a shielded room or any other test facility as defined in the notification #173 issued by Ministry of Internal
Affairs and Communications on March 28, 2006, based on Sub-section 1.1 of Article 6 of the Ministry’s Rule for
Enforcement of Radio Law of Japan,
Use EVMs only after User obtains the license of Test Radio Station as provided in Radio Law of Japan with respect to
EVMs, or
Use of EVMs only after User obtains the Technical Regulations Conformity Certification as provided in Radio Law of Japan
with respect to EVMs. Also, do not transfer EVMs, unless User gives the same notice above to the transferee. Please note
that if User does not follow the instructions above, User will be subject to penalties of Radio Law of Japan.
SPACER
SPACER
SPACER
SPACER
SPACER
【無線電波を送信する製品の開発キットをお使いになる際の注意事項】 開発キットの中には技術基準適合証明を受けて
いないものがあります。 技術適合証明を受けていないもののご使用に際しては、電波法遵守のため、以下のいずれかの
措置を取っていただく必要がありますのでご注意ください。
1.
2.
3.
電波法施行規則第6条第1項第1号に基づく平成18年3月28日総務省告示第173号で定められた電波暗室等の試験設備でご使用
いただく。
実験局の免許を取得後ご使用いただく。
技術基準適合証明を取得後ご使用いただく。
なお、本製品は、上記の「ご使用にあたっての注意」を譲渡先、移転先に通知しない限り、譲渡、移転できないものとします。
上記を遵守頂けない場合は、電波法の罰則が適用される可能性があることをご留意ください。 日本テキサス・イ
ンスツルメンツ株式会社
東京都新宿区西新宿６丁目２４番１号
西新宿三井ビル
3.3.3
Notice for EVMs for Power Line Communication: Please see http://www.tij.co.jp/lsds/ti_ja/general/eStore/notice_02.page
電力線搬送波通信についての開発キットをお使いになる際の注意事項については、次のところをご覧くださ
い。http://www.tij.co.jp/lsds/ti_ja/general/eStore/notice_02.page
SPACER
4
EVM Use Restrictions and Warnings:
4.1 EVMS ARE NOT FOR USE IN FUNCTIONAL SAFETY AND/OR SAFETY CRITICAL EVALUATIONS, INCLUDING BUT NOT
LIMITED TO EVALUATIONS OF LIFE SUPPORT APPLICATIONS.
4.2 User must read and apply the user guide and other available documentation provided by TI regarding the EVM prior to handling
or using the EVM, including without limitation any warning or restriction notices. The notices contain important safety information
related to, for example, temperatures and voltages.
4.3 Safety-Related Warnings and Restrictions:
4.3.1
User shall operate the EVM within TI’s recommended specifications and environmental considerations stated in the user
guide, other available documentation provided by TI, and any other applicable requirements and employ reasonable and
customary safeguards. Exceeding the specified performance ratings and specifications (including but not limited to input
and output voltage, current, power, and environmental ranges) for the EVM may cause personal injury or death, or
property damage. If there are questions concerning performance ratings and specifications, User should contact a TI
field representative prior to connecting interface electronics including input power and intended loads. Any loads applied
outside of the specified output range may also result in unintended and/or inaccurate operation and/or possible
permanent damage to the EVM and/or interface electronics. Please consult the EVM user guide prior to connecting any
load to the EVM output. If there is uncertainty as to the load specification, please contact a TI field representative.
During normal operation, even with the inputs and outputs kept within the specified allowable ranges, some circuit
components may have elevated case temperatures. These components include but are not limited to linear regulators,
switching transistors, pass transistors, current sense resistors, and heat sinks, which can be identified using the
information in the associated documentation. When working with the EVM, please be aware that the EVM may become
very warm.
4.3.2
EVMs are intended solely for use by technically qualified, professional electronics experts who are familiar with the
dangers and application risks associated with handling electrical mechanical components, systems, and subsystems.
User assumes all responsibility and liability for proper and safe handling and use of the EVM by User or its employees,
affiliates, contractors or designees. User assumes all responsibility and liability to ensure that any interfaces (electronic
and/or mechanical) between the EVM and any human body are designed with suitable isolation and means to safely
limit accessible leakage currents to minimize the risk of electrical shock hazard. User assumes all responsibility and
liability for any improper or unsafe handling or use of the EVM by User or its employees, affiliates, contractors or
designees.
4.4 User assumes all responsibility and liability to determine whether the EVM is subject to any applicable international, federal,
state, or local laws and regulations related to User’s handling and use of the EVM and, if applicable, User assumes all
responsibility and liability for compliance in all respects with such laws and regulations. User assumes all responsibility and
liability for proper disposal and recycling of the EVM consistent with all applicable international, federal, state, and local
requirements.
5.
Accuracy of Information: To the extent TI provides information on the availability and function of EVMs, TI attempts to be as accurate
as possible. However, TI does not warrant the accuracy of EVM descriptions, EVM availability or other information on its websites as
accurate, complete, reliable, current, or error-free.
SPACER
SPACER
SPACER
SPACER
SPACER
SPACER
SPACER
6.
Disclaimers:
6.1 EXCEPT AS SET FORTH ABOVE, EVMS AND ANY WRITTEN DESIGN MATERIALS PROVIDED WITH THE EVM (AND THE
DESIGN OF THE EVM ITSELF) ARE PROVIDED "AS IS" AND "WITH ALL FAULTS." TI DISCLAIMS ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED, REGARDING SUCH ITEMS, INCLUDING BUT NOT LIMITED TO ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF ANY
THIRD PARTY PATENTS, COPYRIGHTS, TRADE SECRETS OR OTHER INTELLECTUAL PROPERTY RIGHTS.
6.2 EXCEPT FOR THE LIMITED RIGHT TO USE THE EVM SET FORTH HEREIN, NOTHING IN THESE TERMS AND
CONDITIONS SHALL BE CONSTRUED AS GRANTING OR CONFERRING ANY RIGHTS BY LICENSE, PATENT, OR ANY
OTHER INDUSTRIAL OR INTELLECTUAL PROPERTY RIGHT OF TI, ITS SUPPLIERS/LICENSORS OR ANY OTHER THIRD
PARTY, TO USE THE EVM IN ANY FINISHED END-USER OR READY-TO-USE FINAL PRODUCT, OR FOR ANY
INVENTION, DISCOVERY OR IMPROVEMENT MADE, CONCEIVED OR ACQUIRED PRIOR TO OR AFTER DELIVERY OF
THE EVM.
7.
USER'S INDEMNITY OBLIGATIONS AND REPRESENTATIONS. USER WILL DEFEND, INDEMNIFY AND HOLD TI, ITS
LICENSORS AND THEIR REPRESENTATIVES HARMLESS FROM AND AGAINST ANY AND ALL CLAIMS, DAMAGES, LOSSES,
EXPENSES, COSTS AND LIABILITIES (COLLECTIVELY, "CLAIMS") ARISING OUT OF OR IN CONNECTION WITH ANY
HANDLING OR USE OF THE EVM THAT IS NOT IN ACCORDANCE WITH THESE TERMS AND CONDITIONS. THIS OBLIGATION
SHALL APPLY WHETHER CLAIMS ARISE UNDER STATUTE, REGULATION, OR THE LAW OF TORT, CONTRACT OR ANY
OTHER LEGAL THEORY, AND EVEN IF THE EVM FAILS TO PERFORM AS DESCRIBED OR EXPECTED.
8.
Limitations on Damages and Liability:
8.1 General Limitations. IN NO EVENT SHALL TI BE LIABLE FOR ANY SPECIAL, COLLATERAL, INDIRECT, PUNITIVE,
INCIDENTAL, CONSEQUENTIAL, OR EXEMPLARY DAMAGES IN CONNECTION WITH OR ARISING OUT OF THESE
TERMS ANDCONDITIONS OR THE USE OF THE EVMS PROVIDED HEREUNDER, REGARDLESS OF WHETHER TI HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. EXCLUDED DAMAGES INCLUDE, BUT ARE NOT LIMITED
TO, COST OF REMOVAL OR REINSTALLATION, ANCILLARY COSTS TO THE PROCUREMENT OF SUBSTITUTE GOODS
OR SERVICES, RETESTING, OUTSIDE COMPUTER TIME, LABOR COSTS, LOSS OF GOODWILL, LOSS OF PROFITS,
LOSS OF SAVINGS, LOSS OF USE, LOSS OF DATA, OR BUSINESS INTERRUPTION. NO CLAIM, SUIT OR ACTION SHALL
BE BROUGHT AGAINST TI MORE THAN ONE YEAR AFTER THE RELATED CAUSE OF ACTION HAS OCCURRED.
8.2 Specific Limitations. IN NO EVENT SHALL TI'S AGGREGATE LIABILITY FROM ANY WARRANTY OR OTHER OBLIGATION
ARISING OUT OF OR IN CONNECTION WITH THESE TERMS AND CONDITIONS, OR ANY USE OF ANY TI EVM
PROVIDED HEREUNDER, EXCEED THE TOTAL AMOUNT PAID TO TI FOR THE PARTICULAR UNITS SOLD UNDER
THESE TERMS AND CONDITIONS WITH RESPECT TO WHICH LOSSES OR DAMAGES ARE CLAIMED. THE EXISTENCE
OF MORE THAN ONE CLAIM AGAINST THE PARTICULAR UNITS SOLD TO USER UNDER THESE TERMS AND
CONDITIONS SHALL NOT ENLARGE OR EXTEND THIS LIMIT.
9.
Return Policy. Except as otherwise provided, TI does not offer any refunds, returns, or exchanges. Furthermore, no return of EVM(s)
will be accepted if the package has been opened and no return of the EVM(s) will be accepted if they are damaged or otherwise not in
a resalable condition. If User feels it has been incorrectly charged for the EVM(s) it ordered or that delivery violates the applicable
order, User should contact TI. All refunds will be made in full within thirty (30) working days from the return of the components(s),
excluding any postage or packaging costs.
10. Governing Law: These terms and conditions shall be governed by and interpreted in accordance with the laws of the State of Texas,
without reference to conflict-of-laws principles. User agrees that non-exclusive jurisdiction for any dispute arising out of or relating to
these terms and conditions lies within courts located in the State of Texas and consents to venue in Dallas County, Texas.
Notwithstanding the foregoing, any judgment may be enforced in any United States or foreign court, and TI may seek injunctive relief
in any United States or foreign court.
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2015, Texas Instruments Incorporated
spacer
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of
non-designated products, TI will not be responsible for any failure to meet ISO/TS16949.
Products
Applications
Audio
www.ti.com/audio
Automotive and Transportation
www.ti.com/automotive
Amplifiers
amplifier.ti.com
Communications and Telecom
www.ti.com/communications
Data Converters
dataconverter.ti.com
Computers and Peripherals
www.ti.com/computers
DLP® Products
www.dlp.com
Consumer Electronics
www.ti.com/consumer-apps
DSP
dsp.ti.com
Energy and Lighting
www.ti.com/energy
Clocks and Timers
www.ti.com/clocks
Industrial
www.ti.com/industrial
Interface
interface.ti.com
Medical
www.ti.com/medical
Logic
logic.ti.com
Security
www.ti.com/security
Power Mgmt
power.ti.com
Space, Avionics and Defense
www.ti.com/space-avionics-defense
Microcontrollers
microcontroller.ti.com
Video and Imaging
www.ti.com/video
RFID
www.ti-rfid.com
OMAP Applications Processors
www.ti.com/omap
TI E2E Community
e2e.ti.com
Wireless Connectivity
www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2015, Texas Instruments Incorporated
工商网监
湘ICP备2023018690号
