TRPGR30ENATGA

Order Now Product Folder Technical Documents Tools & Software Support & Community TRPGR30ENATGA SCBS898 – OCTOBER 2013 23-mm Low-Frequency Glass-Encapsulated Transponder, Read Only, EN 14803 Numbering 1 Features 3 Description • Texas Instruments 23-mm low-frequency (LF) glass transponders provide superior performance and operate at a resonance frequency of 134.2 kHz. The products are compliant to ISO/IEC 11784/11785 global open standards. Texas Instruments LF glass transponders are manufactured with TI's patented tuning process to provide consistent read performance. Prior to delivery, the transponders undergo complete functional and parametric testing, to provide the high quality customers have come to expect from TI. 1 • • • • Best-in-Class Performance Through Patented HDX+ (Half-Duplex) Technology Patented Transponder Tuning Provides Stable and High Read Performance 80-Bit Read-Only Type EN 14803 Numbering Insensitive to Almost All Nonmetallic Materials 2 Applications • Waste Container Management 4 Specifications 4.1 Absolute Maximum Ratings (1) over operating free-air temperature range (unless otherwise noted) TRPGR30ENATGA TA Operating temperature –25°C to 70°C TSTG Storage temperature –40°C to 85°C (1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under Specifications is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. 4.2 Characteristics PARAMETER TRPGR30ENATGA Functionality Read only Memory (bits) 80 (64-bit unique ID + 16-bit BCC) Memory (pages) 1 Resonance frequency 134.6 kHz Modulation FSK (frequency shift keying) 134.2 kHz and 124.2 kHz Transmission principle HDX (half duplex) Power source Powered from the reader signal (battery-less) Typical reading range ≤110 cm (1) Typical reading time 70 ms Case material Glass Protection glass Hermetically sealed EMC Programmed code is not affected by natural electromagnetic interference or x-rays Signal penetration Transponder can be read through almost all nonmetallic material Mechanical shock IEC 60068-2-32 free-fall drop test, 20 times from 1.5-m height Dimensions Ø 3.85 ± 0.05 mm x 23.1 ± 0.5 mm Weight 0.8 g (1) Depends on RF regulation in country of use, the reader antenna configuration, and the environmental conditions. 1 An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications, intellectual property matters and other important disclaimers. PRODUCTION DATA. PACKAGE OPTION ADDENDUM www.ti.com 10-Dec-2020 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan (2) Lead finish/ Ball material MSL Peak Temp Op Temp (°C) (3) Device Marking (4/5) (6) TRPGR30ENATGA ACTIVE RFIDT TGA 0 2000 RoHS & Non-Green Call TI N / A for Pkg Type -25 to 70 (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of