RI-ANT-G01E, RI-ANT-G02E
RI-ANT-S01C, RI-ANT-S02C
www.ti.com
SCBS845A – MARCH 2002 – REVISED JULY 2013
SERIES 2000 ANTENNAS
Check for Samples: RI-ANT-G01E, RI-ANT-G02E, RI-ANT-S01C, RI-ANT-S02C
FEATURES
DESCRIPTION
•
These antenna products connect to radio frequency
modules (RFM) and reader/writers to form the
interface to the low-frequency (LF) 134.2-kHz Texas
Instruments transponders. In combination with a
reader/writer, they transmit energy and signals to the
transponder and receive the response from the tag.
There are two standard gate antennas and two
standard stick antennas with 1-meter or 3-meter
cable length. Each antenna generates a specific size
and shape of read zone to meet the requirements of
the target application. In general, the gate antennas
generate a large read zone with greater read
distance, while the stick antennas provide a more
focused read zone and an ability to discriminate
between transponders.
1
•
•
•
•
Best in Class Performance Through Patented
HDX Technology
Protection Class IP 65 and Higher
Four Form Factors Available
Proven in Harsh Industrial Environments
Easy to Install and Use
APPLICATIONS
•
•
•
•
•
Access Control
Vehicle Identification
Container Tracking
Asset Management
Waste Management
The antennas are well suited for use in a broad range
of applications including access control, vehicle
identification, container tracking, asset management,
and waste management applications.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2002–2013, Texas Instruments Incorporated
RI-ANT-G01E, RI-ANT-G02E
RI-ANT-S01C, RI-ANT-S02C
SCBS845A – MARCH 2002 – REVISED JULY 2013
www.ti.com
Gate Antennas – Specifications
Absolute Maximum Ratings
over operating free-air temperature range (unless otherwise noted)
RI-ANT-G01E
RI-ANT-G02E
UNIT
Operating Temperature
–30 to +60
–30 to +60
°C
Storage Temperature
–40 to +70
–40 to +70
°C
RI-ANT-G02E
UNIT
Operating Characteristics
over operating free-air temperature range (unless otherwise noted)
PARAMETER
RI-ANT-G01E
Inductance (typical), at 134.2 kHz
27
27
µH
Protection Class
IP 65
IP 65
Vibration
Mil-Std-810E, Test 514.4 (Category 1, Procedure 1; Basic transportation)
Case Material
UVSHIPS (UV-Stabilized High Impact Polystyrol)
Dimensions
715 ± 5 × 270 ± 3 × 25 ± 1
200 ± 3 × 200 ± 3 × 25 ± 1
Weight (typical)
745
425
g
Cable Length
1
1
m
Connection Terminals
Spade and tongue, stud hole 3.5 mm, width 7.5 mm
Mounting
Use nonmetallic clamps, standard screws, and washers through 6.5-mm
predrilled holes, so that the screw hole is flush with the mounting. Mounting
material is not supplied with the antenna.
mm
Stick Antennas – Specifications
Absolute Maximum Ratings
over operating free-air temperature range (unless otherwise noted)
RI-ANT-S01C
RI-ANT-S02C
UNIT
Operating Temperature
–30 to +70
–30 to +70
°C
Storage Temperature
–40 to +85
–40 to +85
°C
RI-ANT-S02C
UNIT
Operating Characteristics
over operating free-air temperature range (unless otherwise noted)
PARAMETER
RI-ANT-S01C
Inductance (typical), at 134.2 kHz
27
27
Protection Class
IP 66
IP 66
Vibration
Mil-Std-810E, Test 514.4 (Category 1, Procedure 1; Basic transportation)
Case Material
Glass reinforced epoxy (gray)
Dimensions
140 ± 2 × 21 ± 2 (dia.)
140 ± 2 × 21 ± 2 (dia.)
Weight (typical)
134
185
g
Cable Length
1
3
m
Connection Terminals
Ring lugs:
3.5-mm inside diameter
7.5-mm outside diameter
Ring lugs:
3.5-mm inside diameter
7.5-mm outside diameter
Mounting
Use nonmetal clamps. Mounting material is not supplied with the antenna.
2
Submit Documentation Feedback
µH
mm
Copyright © 2002–2013, Texas Instruments Incorporated
Product Folder Links: RI-ANT-G01E RI-ANT-G02E RI-ANT-S01C RI-ANT-S02C
RI-ANT-G01E, RI-ANT-G02E
RI-ANT-S01C, RI-ANT-S02C
www.ti.com
SCBS845A – MARCH 2002 – REVISED JULY 2013
Readout Pattern of Ferrite Rod (Stick) and Gate Antennas
Trp. 1 reading field
Trp. 2 reading field
Trp. 1
Trp. 1
Trp. 2
Trp. 2
Stick Antenna
Gate Antenna
Figure 1. Readout Pattern of Antennas
Copyright © 2002–2013, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: RI-ANT-G01E RI-ANT-G02E RI-ANT-S01C RI-ANT-S02C
3
RI-ANT-G01E, RI-ANT-G02E
RI-ANT-S01C, RI-ANT-S02C
SCBS845A – MARCH 2002 – REVISED JULY 2013
www.ti.com
REVISION HISTORY
REVISION
SCBS845
SCBS845A
4
CHANGES
First release
Removed all information about RI-ANT-G04E and RI-ANT-P02A (obsolete)
Submit Documentation Feedback
Copyright © 2002–2013, Texas Instruments Incorporated
Product Folder Links: RI-ANT-G01E RI-ANT-G02E RI-ANT-S01C RI-ANT-S02C
PACKAGE OPTION ADDENDUM
www.ti.com
23-Feb-2017
PACKAGING INFORMATION
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
MSL Peak Temp
(2)
(6)
(3)
Op Temp (°C)
Device Marking
(4/5)
RI-ANT-G01E-30
ACTIVE
0
1
TBD
Call TI
Call TI
-30 to 60
RI-ANT-G02E-30
ACTIVE
0
1
TBD
Call TI
Call TI
-30 to 60
RI-ANT-S02C-30
ACTIVE
0
TBD
Call TI
Call TI
-30 to 70
TRPGP40TGC
ACTIVE
RFIDT
TGC
0
TBD
Call TI
Call TI
-25 to 70
TRPGR30ATGA
ACTIVE
RFIDT
TGA
0
2000
Pb-Free
(RoHS)
Call TI
N / A for Pkg Type
-25 to 70
TRPGR30ATGB
ACTIVE
RFIDT
TGB
0
2000
Pb-Free
(RoHS)
Call TI
N / A for Pkg Type
-25 to 70
TRPGR30ENATGA
ACTIVE
RFIDT
TGA
0
2000
Pb-Free
(RoHS)
Call TI
N / A for Pkg Type
-25 to 70
TRPGR30ENATGB
ACTIVE
RFIDT
TGB
0
2000
Pb-Free
(RoHS)
Call TI
N / A for Pkg Type
-25 to 70
TRPGR30TGC
ACTIVE
RFIDT
TGC
0
TBD
Call TI
Call TI
-25 to 85
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3)
MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
Addendum-Page 1
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
(4)
23-Feb-2017
There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.
(5)
Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation
of the previous line and the two combined represent the entire Device Marking for that device.
(6)
Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish
value exceeds the maximum column width.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
Addendum-Page 2
IMPORTANT NOTICE FOR TI DESIGN INFORMATION AND RESOURCES
Texas Instruments Incorporated (‘TI”) technical, application or other design advice, services or information, including, but not limited to,
reference designs and materials relating to evaluation modules, (collectively, “TI Resources”) are intended to assist designers who are
developing applications that incorporate TI products; by downloading, accessing or using any particular TI Resource in any way, you
(individually or, if you are acting on behalf of a company, your company) agree to use it solely for this purpose and subject to the terms of
this Notice.
TI’s provision of TI Resources does not expand or otherwise alter TI’s applicable published warranties or warranty disclaimers for TI
products, and no additional obligations or liabilities arise from TI providing such TI Resources. TI reserves the right to make corrections,
enhancements, improvements and other changes to its TI Resources.
You understand and agree that you remain responsible for using your independent analysis, evaluation and judgment in designing your
applications and that you have full and exclusive responsibility to assure the safety of your applications and compliance of your applications
(and of all TI products used in or for your applications) with all applicable regulations, laws and other applicable requirements. You
represent that, with respect to your applications, you have all the necessary expertise to create and implement safeguards that (1)
anticipate dangerous consequences of failures, (2) monitor failures and their consequences, and (3) lessen the likelihood of failures that
might cause harm and take appropriate actions. You agree that prior to using or distributing any applications that include TI products, you
will thoroughly test such applications and the functionality of such TI products as used in such applications. TI has not conducted any
testing other than that specifically described in the published documentation for a particular TI Resource.
You are authorized to use, copy and modify any individual TI Resource only in connection with the development of applications that include
the TI product(s) identified in such TI Resource. NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO
ANY OTHER TI INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY TECHNOLOGY OR INTELLECTUAL PROPERTY
RIGHT OF TI OR ANY THIRD PARTY IS GRANTED HEREIN, including but not limited to any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information
regarding or referencing third-party products or services does not constitute a license to use such products or services, or a warranty or
endorsement thereof. Use of TI Resources may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
TI RESOURCES ARE PROVIDED “AS IS” AND WITH ALL FAULTS. TI DISCLAIMS ALL OTHER WARRANTIES OR
REPRESENTATIONS, EXPRESS OR IMPLIED, REGARDING TI RESOURCES OR USE THEREOF, INCLUDING BUT NOT LIMITED TO
ACCURACY OR COMPLETENESS, TITLE, ANY EPIDEMIC FAILURE WARRANTY AND ANY IMPLIED WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL
PROPERTY RIGHTS.
TI SHALL NOT BE LIABLE FOR AND SHALL NOT DEFEND OR INDEMNIFY YOU AGAINST ANY CLAIM, INCLUDING BUT NOT
LIMITED TO ANY INFRINGEMENT CLAIM THAT RELATES TO OR IS BASED ON ANY COMBINATION OF PRODUCTS EVEN IF
DESCRIBED IN TI RESOURCES OR OTHERWISE. IN NO EVENT SHALL TI BE LIABLE FOR ANY ACTUAL, DIRECT, SPECIAL,
COLLATERAL, INDIRECT, PUNITIVE, INCIDENTAL, CONSEQUENTIAL OR EXEMPLARY DAMAGES IN CONNECTION WITH OR
ARISING OUT OF TI RESOURCES OR USE THEREOF, AND REGARDLESS OF WHETHER TI HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
You agree to fully indemnify TI and its representatives against any damages, costs, losses, and/or liabilities arising out of your noncompliance with the terms and provisions of this Notice.
This Notice applies to TI Resources. Additional terms apply to the use and purchase of certain types of materials, TI products and services.
These include; without limitation, TI’s standard terms for semiconductor products http://www.ti.com/sc/docs/stdterms.htm), evaluation
modules, and samples (http://www.ti.com/sc/docs/sampterms.htm).
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2017, Texas Instruments Incorporated