TS5A23160
0.9-Ω DUAL SPDT ANALOG SWITCH
5-V/3.3-V 2-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER
www.ti.com
SCDS210A – AUGUST 2005 – REVISED APRIL 2006
FEATURES
APPLICATIONS
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Specified Make-Before-Break Switching
Low ON-State Resistance (1 Ω)
Control Inputs Are 5.5-V Tolerant
Low Charge Injection
Excellent ON-State Resistance Matching
Low Total Harmonic Distortion (THD)
1.65-V to 5.5-V Single-Supply Operation
Latch-Up Performance Exceeds 100 mA Per
JESD 78, Class II
ESD Performance Tested Per JESD 22
– 2000-V Human-Body Model
(A114-B, Class II)
– 1000-V Charged-Device Model (C101)
Cell Phones
PDAs
Portable Instrumentation
Audio and Video Signal Routing
Low-Voltage Data Acquisition Systems
Communication Circuits
Modems
Hard Drives
Computer Peripherals
Wireless Terminals and Peripherals
VSSOP PACKAGE
(TOP VIEW)
IN1 1
10 COM1
NO1 2
9
NC1
GND 3
8
V+
NO2 4
7
NC2
IN2 5
6
COM2
DESCRIPTION
The TS5A23160 is a dual single-pole double-throw (SPDT) analog switch that is designed to operate from
1.65 V to 5.5 V. The device offers a low ON-state resistance and an excellent channel-to-channel ON-state
resistance matching. The device has excellent total harmonic distortion (THD) performance and consumes very
low power. These features make this device suitable for portable audio applications.
FUNCTION TABLE
NC TO COM,
COM TO NC
NO TO COM,
COM TO NO
L
ON
OFF
H
OFF
ON
IN
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2005–2006, Texas Instruments Incorporated
TS5A23160
0.9-Ω DUAL SPDT ANALOG SWITCH
5-V/3.3-V 2-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER
www.ti.com
SCDS210A – AUGUST 2005 – REVISED APRIL 2006
SUMMARY OF CHARACTERISTICS (1)
Dual 2:1 Multiplexer/
Demultiplexer
(2 × SPDT)
Configuration
Number of channels
2
ON-state resistance (ron)
0.9 Ω
ON-state resistance match (∆ron)
0.1 Ω
ON-state resistance flatness
(ron(flat))
0.15 Ω
Turn-on/turn-off time (tON/tOFF)
2.5 ns/6 ns
Make-before-break time (tMBB)
5.5 ns
Charge injection (QC)
1 pC
Bandwidth (BW)
95 MHz
OFF isolation (OISO)
–64 dB at 1 MHz
Crosstak (XTALK)
–64 dB at 1 MHz
Total harmonic distortion (THD)
0.004%
Leakage current (INC(OFF))
±20 nA
Power-supply current (I+)
0.1 µA
Package option
(1)
10-pin VSSOP
V+ = 5 V, TA = 25°C
ORDERING INFORMATION
TA
–40°C to 85°C
(1)
2
PACKAGE (1)
VSSOP – DGS (MSOP)
ORDERABLE PART NUMBER
Tape and reel
TS5A23160DGSR
TOP-SIDE MARKING
PREVIEW
Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at
www.ti.com/sc/package.
Submit Documentation Feedback
TS5A23160
0.9-Ω DUAL SPDT ANALOG SWITCH
5-V/3.3-V 2-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER
www.ti.com
SCDS210A – AUGUST 2005 – REVISED APRIL 2006
Absolute Maximum Ratings
(1) (2)
over operating free-air temperature range (unless otherwise noted)
MIN
MAX
V+
Supply voltage range (3)
–0.5
6.5
V
VNC
VNO
VCOM
Analog voltage range (3) (4) (5)
–0.5
V+ + 0.5
V
IK
Analog port diode current
–50
50
INC
INO
ICOM
On-state switch current
–200
200
–400
400
VI
Digital input voltage range (3) (4)
–0.5
6.5
IIK
Digital input clamp current
I+
Continuous current through V+
IGND
Continuous current through GND
On-state peak switch current (6)
θJA
Package thermal
Tstg
Storage temperature range
(1)
(2)
(3)
(4)
(5)
(6)
(7)
VNC, VNO, VCOM < 0 or VNC, VNO, VCOM > V+
VNC, VNO, VCOM = 0 to V+
VI < 0
–50
–100
impedance (7)
–65
UNIT
mA
mA
V
mA
100
mA
100
mA
165
°C/W
150
°C
Stresses above these ratings may cause permanent damage. Exposure to absolute maximum conditions for extended periods may
degrade device reliability. These are stress ratings only, and functional operation of the device at these or any other conditions beyond
those specified is not implied.
The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum
All voltages are with respect to ground, unless otherwise specified.
The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed.
This value is limited to 5.5 V maximum.
Pulse at 1-ms duration < 10% duty cycle
The package thermal impedance is calculated in accordance with JESD 51-7.
Submit Documentation Feedback
3
TS5A23160
0.9-Ω DUAL SPDT ANALOG SWITCH
5-V/3.3-V 2-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER
www.ti.com
SCDS210A – AUGUST 2005 – REVISED APRIL 2006
Electrical Characteristics for 5-V Supply (1)
V+ = 4.5 V to 5.5 V, TA = –40°C to 85°C (unless otherwise noted)
PARAMETER
SYMBOL
TEST CONDITIONS
TA
V+
MIN
TYP
MAX
UNIT
Analog Switch
Analog signal
range
VCOM, VNO,
VNC
Peak ON
resistance
rpeak
ON-state
resistance
ron
ON-state
resistance
match
between
channels
ON-state
resistance
flatness
NC, NO
OFF leakage
current
4
0 ≤ (VNO or VNC) ≤ V+,
ICOM = –100 mA,
Switch ON,
See Figure 14
25°C
VNO or VNC = 2.5 V,
ICOM = –100 mA,
Switch ON,
See Figure 14
25°C
Full
Full
∆ron
ron(flat)
INC(OFF),
INO(OFF)
NC, NO
ON leakage
current
INC(ON),
INO(ON)
COM
OFF leakage
current
ICOM(PWROFF)
COM
ON leakage
current
ICOM(ON)
VNO or VNC = 2.5 V,
ICOM = –100 mA,
Switch ON,
See Figure 14
0 ≤ (VNO or VNC) ≤ V+,
ICOM = –100 mA,
Switch ON,
See Figure 14
VNO or VNC = 1 V,
1.5 V, 2.5 V,
ICOM = –100 mA,
Switch ON,
See Figure 14
VNC or VNO = 1 V,
VCOM = 4.5 V,
or
VNC or VNO = 4.5 V,
VCOM = 1 V,
Switch OFF,
See Figure 15
VNC or VNO = 0 to 5.5 V,
VCOM = 5.5 V to 0,
Switch OFF,
See Figure 15
VNC or VNO = 1 V,
VCOM = Open,
VNC or VNO = 4.5 V,
VCOM = Open,
Switch ON,
See Figure 16
VNC or VNO = 0 to 5.5 V,
VCOM = 5.5 V to 0,
Switch OFF,
See Figure 15
VNC or VNO = Open,
VCOM = 1 V,
VNC or VNO = Open,
VCOM = 4.5 V,
Switch ON,
See Figure 16
Full
0.7
4.5 V
0.05
4.5 V
Full
0.1
–20
5.5 V
0V
5.5 V
Ω
Ω
20
150
–1
1
20
–20
20
–150
150
0.1
–20
1
20
2
–150
The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum
Submit Documentation Feedback
0.25
–20
–20
5.5 V
2
–150
–1
0V
25°C
Full
Ω
0.25
25°C
Full
Ω
0.15
25°C
Full
V
0.1
0.1
4.5 V
25°C
25°C
0.9
1.1
Full
Full
1.1
1.5
25°C
25°C
V+
0.8
4.5 V
25°C
INC(PWROFF),
INO(PWROFF)
(1)
0
nA
µA
nA
µA
20
150
nA
TS5A23160
0.9-Ω DUAL SPDT ANALOG SWITCH
5-V/3.3-V 2-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER
www.ti.com
SCDS210A – AUGUST 2005 – REVISED APRIL 2006
Electrical Characteristics for 5-V Supply (continued)
V+ = 4.5 V to 5.5 V, TA = –40°C to 85°C (unless otherwise noted)
PARAMETER
SYMBOL
Digital Control Inputs (IN1,
TEST CONDITIONS
TA
V+
MIN
TYP
MAX
UNIT
IN2) (2)
Input logic high
VIH
Full
2.4
5.5
V
Input logic low
VIL
Full
0
0.8
V
Input leakage
current
IIH, IIL
–2
2
nA
–1
1
µA
25°C
VI = 5.5 V or 0
Full
5.5 V
Dynamic
25°C
5V
Full
4.5 V to
5.5 V
25°C
5V
Full
4.5 V to
5.5 V
25°C
5V
Full
4.5 V to
5.5 V
CL = 1 nF,
See Figure 23
25°C
5V
1
pC
Turn-on time
tON
VCOM = V+,
RL = 50 Ω,
CL = 35 pF,
See Figure 18
Turn-off time
tOFF
VCOM = V+,
RL = 50 Ω,
CL = 35 pF,
See Figure 18
Make-before
break time
tMBB
VCOM = V+,
RL = 50 Ω,
CL = 35 pF,
See Figure 19
Charge
injection
QC
VGEN = 0,
RGEN = 0,
1
2.5
0.5
2
5.5
6.5
6
0.5
ns
10
13.5
ns
5.5
2
9.5
ns
NC, NO
OFF
capacitance
CNC(OFF),
CNO(OFF)
VNC or VNO = V+ or GND,
Switch OFF,
See Figure 17
25°C
5V
18
pF
NC, NO
ON
capacitance
CNC(ON),
CNO(ON)
VNC or VNO = V+ or GND,
Switch ON,
See Figure 17
25°C
5V
55
pF
COM
ON
capacitance
CCOM(ON)
VCOM = V+ or GND,
Switch ON,
See Figure 17
25°C
5V
55
pF
Digital input
capacitance
CI
VI = V+ or GND,
See Figure 17
25°C
5V
2
pF
Bandwidth
BW
RL = 50 Ω,
Switch ON,
See Figure 20
25°C
5V
95
MHz
OFF isolation
OISO
RL = 50 Ω,
f = 1 MHz,
Switch OFF,
See Figure 21
25°C
5V
–64
dB
Crosstalk
XTALK
RL = 50 Ω,
f = 1 MHz,
Switch ON,
See Figure 22
25°C
5V
–64
dB
Total harmonic
distortion
THD
RL = 600 Ω,
CL = 50 pF,
f = 20 Hz to 20 kHz,
See Figure 24
25°C
5V
0.004
%
VI = V+ or GND,
Switch ON or OFF
Supply
Positive supply
current
(2)
I+
25°C
Full
5.5 V
10
nA
0.5
µA
All unused digital inputs of the device must be held at V+ or GND to ensure proper device operation. Refer to the TI application report,
Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
Submit Documentation Feedback
5
TS5A23160
0.9-Ω DUAL SPDT ANALOG SWITCH
5-V/3.3-V 2-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER
www.ti.com
SCDS210A – AUGUST 2005 – REVISED APRIL 2006
Electrical Characteristics for 3.3-V Supply (1)
V+ = 3 V to 3.6 V, TA = –40°C to 85°C (unless otherwise noted)
PARAMETER
SYMBOL
TEST CONDITIONS
TA
V+
MIN
TYP
MAX
UNIT
Analog Switch
Analog signal
range
VCOM, VNO,
VNC
Peak ON
resistance
rpeak
ON-state
resistance
ron
ON-state
resistance
match
between
channels
ON-state
resistance
flatness
NC, NO
OFF leakage
current
6
0 ≤ (VNO or VNC) ≤ V+,
ICOM = –100 mA,
Switch ON,
See Figure 14
25°C
VNO or VNC = 2 V,
ICOM = –100 mA,
Switch ON,
See Figure 14
25°C
Full
Full
∆ron
ron(flat)
INC(OFF),
INO(OFF)
NC, NO
ON leakage
current
INC(ON),
INO(ON)
COM
OFF leakage
current
ICOM(PWROFF)
COM
ON leakage
current
ICOM(ON)
VNO or VNC = 2 V, 0.8 V,
ICOM = –100 mA,
Switch ON,
See Figure 14
0 ≤ (VNO or VNC) ≤ V+,
ICOM = –100 mA,
Switch ON,
See Figure 14
VNO or VNC = 2 V, 0.8 V,
ICOM = –100 mA,
Switch ON,
See Figure 14
VNC or VNO = 1 V,
VCOM = 3 V,
or
VNC or VNO = 3 V,
VCOM = 1 V,
Switch OFF,
See Figure 15
VNC or VNO = 0 to 3.6 V,
VCOM = 3.6 V to 0,
Switch OFF,
See Figure 15
VNC or VNO = 1 V,
VCOM = Open,
or
VNC or VNO = 3 V,
VCOM = Open,
Switch ON,
See Figure 16
VNC or VNO = 3.6 V to 0,
VCOM = 0 to 3.6 V,
Switch OFF,
See Figure 15
VNC or VNO = Open,
VCOM = 1 V,
VNC or VNO = Open,
VCOM = 3 V,
Switch ON,
See Figure 16
Full
1.2
3V
0.01
3V
Full
0.15
–20
3.6 V
0V
3.6 V
–1
Ω
Ω
20
1
15
2
–20
0.2
1
15
2
–20
nA
µA
20
20
–15
–20
3.6 V
0.2
The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum
Submit Documentation Feedback
0.3
50
–15
–1
0V
2
–50
–20
25°C
Full
Ω
0.3
25°C
Full
Ω
0.2
25°C
Full
V
0.15
0.15
3V
25°C
25°C
1.5
1.7
Full
Full
1.6
2
25°C
25°C
V+
1.3
3V
25°C
INC(PWROFF),
INO(PWROFF)
(1)
0
nA
µA
20
20
nA
TS5A23160
0.9-Ω DUAL SPDT ANALOG SWITCH
5-V/3.3-V 2-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER
www.ti.com
SCDS210A – AUGUST 2005 – REVISED APRIL 2006
Electrical Characteristics for 3.3-V Supply (continued)
V+ = 3 V to 3.6 V, TA = –40°C to 85°C (unless otherwise noted)
PARAMETER
SYMBOL
Digital Control Inputs (IN1,
TEST CONDITIONS
TA
V+
MIN
TYP
MAX
UNIT
IN2) (2)
Input logic high
VIH
Full
2
5.5
V
Input logic low
VIL
Full
0
0.8
V
Input leakage
current
IIH, IIL
25°C
VI = 5.5 V or 0
Full
3.6 V
–2
2
–20
20
nA
Dynamic
25°C
3.3 V
1.5
Full
3 V to
3.6 V
0.5
25°C
3.3 V
2.5
Full
3 V to
3.6 V
1
25°C
3.3 V
Full
3 V to
3.6 V
CL = 1 nF,
See Figure 23
25°C
3.3 V
3
pC
Turn-on time
tON
VCOM = V+,
RL = 50 Ω,
CL = 35 pF,
See Figure 18
Turn-off time
tOFF
VCOM = V+,
RL = 50 Ω,
CL = 35 pF,
See Figure 18
Make-before
break time
tMBB
VCOM = V+,
RL = 50 Ω,
CL = 35 pF,
See Figure 19
VGEN = 0,
RGEN = 0,
Charge
injection
QC
3.5
6.5
8
7
ns
11.5
14.5
ns
5.5
2
9.5
ns
NC, NO
OFF
capacitance
CNC(OFF),
CNO(OFF)
VNC or VNO = V+ or GND,
Switch OFF,
See Figure 17
25°C
3.3 V
18
pF
NC, NO
ON
capacitance
CNC(ON),
CNO(ON)
VNC or VNO = V+ or GND,
Switch ON,
See Figure 17
25°C
3.3 V
56
pF
COM
ON
capacitance
CCOM(ON)
VCOM = V+ or GND,
Switch ON,
See Figure 17
25°C
3.3 V
56
pF
Digital input
capacitance
CI
VI = V+ or GND,
See Figure 17
25°C
3.3 V
2
pF
Bandwidth
BW
RL = 50 Ω,
Switch ON,
See Figure 20
25°C
3.3 V
95
MHz
OFF isolation
OISO
RL = 50 Ω,
f = 1 MHz,
Switch OFF,
See Figure 21
25°C
3.3 V
–64
dB
Crosstalk
XTALK
RL = 50 Ω,
f = 1 MHz,
Switch ON,
See Figure 22
25°C
3.3 V
–64
dB
Total harmonic
distortion
THD
RL = 600 Ω,
CL = 50 pF,
f = 20 Hz to 20 kHz,
See Figure 24
25°C
3.3 V
0.01
%
VI = V+ or GND,
Switch ON or OFF
Supply
Positive supply
current
(2)
I+
25°C
Full
3.6 V
10
100
nA
All unused digital inputs of the device must be held at V+ or GND to ensure proper device operation. Refer to the TI application report,
Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
Submit Documentation Feedback
7
TS5A23160
0.9-Ω DUAL SPDT ANALOG SWITCH
5-V/3.3-V 2-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER
www.ti.com
SCDS210A – AUGUST 2005 – REVISED APRIL 2006
Electrical Characteristics for 2.5-V Supply (1)
V+ = 2.3 V to 2.7 V, TA = –40°C to 85°C (unless otherwise noted)
PARAMETER
SYMBOL
TEST CONDITIONS
TA
V+
MIN
TYP
MAX
UNIT
Analog Switch
Analog signal
range
VCOM, VNO,
VNC
0 ≤ (VNO or VNC) ≤ V+,
ICOM = –8 mA,
Switch ON,
See Figure 14
25°C
ron
VNO or VNC = 1.8 V,
ICOM = –8 mA,
Switch ON,
See Figure 14
25°C
∆ron
VNO or VNC = 1.8 V,
0.8 V,
ICOM = –8 mA,
Switch ON,
See Figure 14
0 ≤ (VNO or VNC) ≤ V+,
ICOM = –8 mA,
Switch ON,
See Figure 14
Peak ON
resistance
rpeak
ON-state
resistance
ON-state
resistance
match
between
channels
ON-state
resistance
flatness
NC, NO
OFF leakage
current
8
Full
Full
ron(flat)
INC(OFF),
INO(OFF)
NC, NO
ON leakage
current
INC(ON),
INO(ON)
COM
OFF leakage
current
ICOM(PWROFF)
COM
ON leakage
current
ICOM(ON)
VNO or VNC = 0.8 V,
1.8 V,
ICOM = –8 V mA,
Switch ON,
See Figure 14
VNC or VNO = 0.5 V,
VCOM = 2.3 V,
or
VNC or VNO = 2.3 V,
VCOM = 0.5 V,
Switch OFF,
See Figure 15
VNC or VNO = 0 to 2.7 V,
VCOM = 2.7 V to 0,
Switch OFF,
See Figure 15
VNC or VNO = 0.5 V,
VCOM = Open,
or
VNC or VNO = 2.3 V,
VCOM = Open,
Switch ON,
See Figure 16
VNC or VNO = 2.7 V to 0,
VCOM = 0 to 2.7 V,
Switch OFF,
See Figure 15
VNC or VNO = Open,
VCOM = 0.5 V,
VNC or VNO = Open,
VCOM = 2.3 V,
Switch ON,
See Figure 16
Full
1.5
2.3 V
0.15
2.3 V
Full
0.6
–20
2.7 V
0V
2.7 V
–1
Ω
Ω
20
1
10
2
–20
0.1
–20
µA
nA
1
10
2
µA
20
20
–10
–20
2.7 V
0.1
The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum
Submit Documentation Feedback
1
50
–10
–1
0V
2
–50
–20
25°C
Full
Ω
1
25°C
Full
Ω
0.6
25°C
Full
V
0.2
0.2
2.3 V
25°C
25°C
2
2.4
Full
Full
2.5
2.7
25°C
25°C
V+
1.8
2.3 V
25°C
INC(PWROFF),
INO(PWROFF)
(1)
0
nA
20
20
nA
TS5A23160
0.9-Ω DUAL SPDT ANALOG SWITCH
5-V/3.3-V 2-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER
www.ti.com
SCDS210A – AUGUST 2005 – REVISED APRIL 2006
Electrical Characteristics for 2.5-V Supply (continued)
V+ = 2.3 V to 2.7 V, TA = –40°C to 85°C (unless otherwise noted)
PARAMETER
SYMBOL
Digital Control Inputs (IN1,
TEST CONDITIONS
TA
V+
MIN
TYP
MAX
UNIT
IN2) (2)
Input logic high
VIH
Full
1.8
5.5
V
Input logic low
VIL
Full
0
0.6
V
Input leakage
current
IIH, IIL
25°C
VI = 5.5 V or 0
Full
2.7 V
–2
2
–20
20
nA
Dynamic
25°C
2.5 V
2
Full
2.3 V to
2.7 V
1
25°C
2.5 V
3.5
Full
2.3 V to
2.7 V
1.5
25°C
2.5 V
Full
2.3 V to
2.7 V
CL = 1 nF,
See Figure 23
25°C
2.5 V
4.5
pC
Turn-on time
tON
VCOM = V+,
RL = 50 Ω,
CL = 35 pF,
See Figure 18
Turn-off time
tOFF
VCOM = V+,
RL = 50 Ω,
CL = 35 pF,
See Figure 18
Make-before
break time
tMBB
VCOM = V+,
RL = 50 Ω,
CL = 35 pF,
See Figure 19
Charge
injection
QC
VGEN = 0,
RGEN = 0,
4.5
8.5
10.5
8.5
ns
13.5
16.5
ns
6
8.5
10
ns
NC, NO
OFF
capacitance
CNC(OFF),
CNO(OFF)
VNC or VNO = V+ or GND,
Switch OFF,
See Figure 17
25°C
2.5 V
18.5
pF
NC, NO
ON
capacitance
CNC(ON),
CNO(ON)
VNC or VNO = V+ or GND,
Switch ON,
See Figure 17
25°C
2.5 V
56.5
pF
COM
ON
capacitance
CCOM(ON)
VCOM = V+ or GND,
Switch ON,
See Figure 17
25°C
2.5 V
56.5
pF
Digital input
capacitance
CI
VI = V+ or GND,
See Figure 17
25°C
2.5 V
2
pF
Bandwidth
BW
RL = 50 Ω,
Switch ON,
See Figure 20
25°C
2.5 V
100
MHz
OFF isolation
OISO
RL = 50 Ω,
f = 1 MHz,
Switch OFF,
See Figure 21
25°C
2.5 V
–64
dB
Crosstalk
XTALK
RL = 50 Ω,
f = 1 MHz,
Switch ON,
See Figure 22
25°C
2.5 V
–64
dB
Total harmonic
distortion
THD
RL = 600 Ω,
CL = 50 pF,
f = 20 Hz to 20 kHz,
See Figure 24
25°C
2.5 V
0.020
%
VI = V+ or GND,
Switch ON or OFF
Supply
Positive supply
current
(2)
I+
25°C
Full
2.7 V
10
50
nA
All unused digital inputs of the device must be held at V+ or GND to ensure proper device operation. Refer to the TI application report,
Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
Submit Documentation Feedback
9
TS5A23160
0.9-Ω DUAL SPDT ANALOG SWITCH
5-V/3.3-V 2-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER
www.ti.com
SCDS210A – AUGUST 2005 – REVISED APRIL 2006
Electrical Characteristics for 1.8-V Supply (1)
V+ = 1.65 V to 1.95 V, TA = –40°C to 85°C (unless otherwise noted)
PARAMETER
SYMBOL
TEST CONDITIONS
TA
V+
MIN
TYP
MAX
UNIT
Analog Switch
Analog signal
range
VCOM, VNO,
VNC
Peak ON
resistance
rpeak
ON-state
resistance
ron
ON-state
resistance
match
between
channels
ON-state
resistance
flatness
NC, NO
OFF leakage
current
COM
OFF leakage
current
COM
ON leakage
current
(1)
10
0 ≤ (VNO or VNC) ≤ V+,
ICOM = –2 mA,
Switch ON,
See Figure 14
25°C
VNO or VNC = 1.5 V,
ICOM = –2 mA,
Switch ON,
See Figure 14
25°C
Full
Full
∆ron
ron(flat)
INC(OFF),
INO(OFF)
INC(ON),
INO(ON)
VNO or VNC = 1.5 V,
ICOM = –8 V mA,
Switch ON,
See Figure 14
0 ≤ (VNO or VNC) ≤ V+,
ICOM = –2 mA,
Switch ON,
See Figure 14
VNO or
VNC = 0.8 V, 1.8 V,
ICOM = –8 mA,
Switch ON,
See Figure 14
VNC or VNO = 0.3 V,
VCOM = 1.65 V,
or
VNC or VNO = 1.65 V,
VCOM = 0.3 V,
Switch OFF,
See Figure 15
VNC or VNO = 0 to 1.95 V,
VCOM = 1.95 V to 0,
Switch OFF,
See Figure 15
VNC or VNO = 0.3 V,
VCOM = Open,
or
VNC or VNO = 1.65 V,
VCOM = Open,
Switch ON,
See Figure 16
30
2
1.65 V
1.65 V
VNC or VNO = Open,
VCOM = 0.3 V,
VNC or VNO = Open,
VCOM = 1.65 V,
Switch ON,
See Figure 16
Ω
Ω
4.5
1
2
20
Ω
Full
Full
25°C
Full
–20
1.95 V
0V
Full
1.95 V
25°C
Full
Full
–50
–1
1
5
2
0.1
1
5
2
–20
The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum
nA
µA
20
20
–5
–20
1.95 V
0.1
–20
–1
0V
50
–5
–20
25°C
Submit Documentation Feedback
Ω
5
1.65 V
25°C
Switch OFF,
See Figure 15
V
0.4
0.4
25°C
25°C
2.5
3.5
0.15
25°C
VNC or
ICOM(PWROFF) VNO = 1.95 V to 0,
VCOM = 0 to 1.95 V,
ICOM(ON)
Full
V+
5
1.65 V
25°C
INC(PWROFF),
INO(PWROFF)
NC, NO
ON leakage
current
0
nA
µA
20
20
nA
TS5A23160
0.9-Ω DUAL SPDT ANALOG SWITCH
5-V/3.3-V 2-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER
www.ti.com
SCDS210A – AUGUST 2005 – REVISED APRIL 2006
Electrical Characteristics for 1.8-V Supply (continued)
V+ = 1.65 V to 1.95 V, TA = –40°C to 85°C (unless otherwise noted)
PARAMETER
SYMBOL
Digital Control Inputs (IN1,
TEST CONDITIONS
TA
V+
MIN
TYP
MAX
UNIT
IN2) (2)
Input logic high
VIH
Full
1.5
5.5
V
Input logic low
VIL
Full
0
0.6
V
Input leakage
current
IIH, IIL
25°C
VI = 5.5 V or 0
Full
1.95 V
–2
2
–20
20
nA
Dynamic
tON
VCOM = V+,
RL = 50 Ω,
CL = 35 pF,
See Figure 18
tOFF
VCOM = V+,
RL = 50 Ω,
CL = 35 pF,
See Figure 18
Make-before
break time
tMBB
VCOM = V+,
RL = 50 Ω,
CL = 35 pF,
See Figure 19
Charge
injection
QC
VGEN = 0,
RGEN = 0,
Turn-on time
Turn-off time
25°C
1.8 V
2.5
Full
1.65 V
to
1.95 V
1
25°C
1.8 V
6.5
Full
1.65 V
to
1.95 V
2
10
14.5
17
12.5
ns
21.5
24
ns
25°C
1.8 V
Full
1.65 V
to
1.95 V
6.5
CL = 1 nF,
See Figure 23
25°C
1.8 V
5.5
pC
2.5
14
ns
NC, NO
OFF
capacitance
CNC(OFF),
CNO(OFF)
VNC or
VNO = V+ or GND,
Switch OFF,
See Figure 17
25°C
1.8 V
18.5
pF
NC, NO
ON
capacitance
CNC(ON),
CNO(ON)
VNC or
VNO = V+ or GND,
Switch ON,
See Figure 17
25°C
1.8 V
56.5
pF
COM
ON
capacitance
CCOM(ON)
VCOM = V+ or GND,
Switch ON,
See Figure 17
25°C
1.8 V
56.5
pF
Digital input
capacitance
CI
VI = V+ or GND,
See Figure 17
25°C
1.8 V
2
pF
Bandwidth
BW
RL = 50 Ω,
Switch ON,
See Figure 20
25°C
1.8 V
100
MHz
OFF isolation
OISO
RL = 50 Ω,
f = 1 MHz,
Switch OFF,
See Figure 21
25°C
1.8 V
–64
dB
Crosstalk
XTALK
RL = 50 Ω,
f = 1 MHz,
Switch ON,
See Figure 22
25°C
1.8 V
–64
dB
Total harmonic
distortion
THD
RL = 600 Ω,
CL = 50 pF,
f = 20 Hz to 20 kHz,
See Figure 24
25°C
1.8 V
0.060
%
VI = V+ or GND,
Switch ON or OFF
Supply
Positive supply
current
(2)
I+
25°C
Full
1.95 V
50
nA
All unused digital inputs of the device must be held at V+ or GND to ensure proper device operation. Refer to the TI application report,
Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
Submit Documentation Feedback
11
TS5A23160
0.9-Ω DUAL SPDT ANALOG SWITCH
5-V/3.3-V 2-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER
www.ti.com
SCDS210A – AUGUST 2005 – REVISED APRIL 2006
TYPICAL PERFORMANCE
3.5
3
1.3
1.1
V+ = 1.8 V
2
ron (Ω)
ron (Ω)
2.5
V+ = 2.5 V
V+ = 3 V
1.5
0.9
0.7
0.5
1
0.3
0.5
0
TA = 85°C
TA = 25°C
TA = −40°C
1.5
TA = 25C
0.1
V+ = 4.5 V
0
1
2
VCOM (V)
0
3
1
4
Figure 1. ron vs VCOM
3
4
Figure 2. ron vs VCOM (V+ = 3.3 V)
1.0
20
V+ = 5 V
0.8
TA = 85°C
0.7
TA = 25°C
0.6
TA = −40°C
0.5
0.4
Leakage (nA)
COM (on)
0.9
ron (Ω)
2
VCOM (V)
0
NO/NC (off)
−20
0.3
NO/NC (on)
0.2
0.1
0
1
2
3
4
5
−40
−60
6
−40
−20
VCOM (V)
40
60
80
10
COM
(pwroff)
2500
2000
1500
NO/NC
(pwroff)
1000
COM1−NC1
COM1−NO1
COM2−NC2
COM2−NO2
0
Charge Injection (pC)
3000
500
0
−10
−20
−30
−40
COM1−NC1
COM1−NO1
COM2−NC2
COM2−NO2
−50
−60
0
−40
−20
0
20
40
60
80
100
1
4
2
3
Bias Voltage (V)
5
Temperature (°C)
Figure 5. Leakage Current vs Temperature
12
100
Figure 4. Leakage Current vs Temperature
3500
Leakage (nA)
20
Temperature (°C)
Figure 3. ron vs VCOM
−500
−60
0
Submit Documentation Feedback
Figure 6. Charge Injection (QC) vs VCOM
6
TS5A23160
0.9-Ω DUAL SPDT ANALOG SWITCH
5-V/3.3-V 2-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER
www.ti.com
SCDS210A – AUGUST 2005 – REVISED APRIL 2006
TYPICAL PERFORMANCE (continued)
16
7
tOFF
14
6
tOFF
5
10
tON/tOFF (ns)
ton/tOFF (ns)
12
tON
8
6
4
2
4
3
2
tON
1
0
0
1
2
3
4
5
0
6
−40°C
25°C
TA (C)
V+ (V)
Figure 7. tON and tOFF vs Supply Voltage
85°C
Figure 8. tON and tOFF vs Temperature (V+ = 5 V)
2.5
2.5
0
VIN rising
−2
2
2.0
−4
VIN
Gain (dB)
VIN falling
1.5
1.5
1
1.0
−6
−8
−10
0.5
0.5
−12
0
0.0
0
1
2
3
4
5
−14
0.1
6
1
V+
0
0.010
−10
0.009
−20
0.008
−30
−40
−50
−60
1000
0.007
0.006
0.005
0.004
−70
0.003
−80
0.002
−90
0.1
100
Figure 10. Bandwidth (Gain vs Frequency)
(V+ = 5 V)
THD + (%)
Attenuation (dB)
Figure 9. Logic Threshold vs V+
10
Frequency (MHz)
1
10
Frequency (MHz)
100
1000
0.001
0
10
Figure 11. OFF Isolation vs Frequency
Submit Documentation Feedback
100
1000
Frequency (Hz)
10000
100000
Figure 12. Total Harmonic Distortion
vs Frequency (V+ = 5 V)
13
TS5A23160
0.9-Ω DUAL SPDT ANALOG SWITCH
5-V/3.3-V 2-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER
www.ti.com
SCDS210A – AUGUST 2005 – REVISED APRIL 2006
TYPICAL PERFORMANCE (continued)
250
I+ (µA)
200
150
100
50
0
−50
−40°C
25°C
85°C
TA (C)
Figure 13. Power-Supply Current
vs Temperature (V+ = 5 V)
PIN DESCRIPTION
PIN
14
NAME
DESCRIPTION
1
IN1
Digital control to connect COM to NO or NC
2
NO1
Normally open
3
GND
Digital ground
4
NO2
Normally open
5
IN2
Digital control to connect COM to NO or NC
6
COM2
7
NC2
8
V+
9
NC1
10
COM1
Common
Normally closed
Power supply
Normally closed
Power supply
Submit Documentation Feedback
TS5A23160
0.9-Ω DUAL SPDT ANALOG SWITCH
5-V/3.3-V 2-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER
www.ti.com
SCDS210A – AUGUST 2005 – REVISED APRIL 2006
PARAMETER DESCRIPTION
SYMBOL
DESCRIPTION
VCOM
Voltage at COM
VNC
Voltage at NC
VNO
Voltage at NO
ron
Resistance between COM and NC or COM and NO ports when the channel is ON
rpeak
Peak on-state resistance over a specified voltage range
∆ron
Difference of ron between channels in a specific device
ron(flat)
Difference between the maximum and minimum value of ron in a channel over the specified range of conditions
INC(OFF)
Leakage current measured at the NC port, with the corresponding channel (NC to COM) in the OFF state under
worst-case input and output conditions
INC(PWROFF)
Leakage current measured at the NC port during the power-down condition, V+ = 0
INO(OFF)
Leakage current measured at the NO port, with the corresponding channel (NO to COM) in the OFF state under
worst-case input and output conditions
INO(PWROFF)
Leakage current measured at the NO port during the power-down condition, V+ = 0
INC(ON)
Leakage current measured at the NC port, with the corresponding channel (NC to COM) in the ON state and the
output (COM) open
INO(ON)
Leakage current measured at the NO port, with the corresponding channel (NO to COM) in the ON state and the
output (COM) open
ICOM(PWROFF)
Leakage current measured at the COM port during the power-down condition, V+ = 0
ICOM(ON)
Leakage current measured at the COM port, with the corresponding channel (COM to NO or COM to NC) in the
ON state and the output (NC or NO) open
VIH
Minimum input voltage for logic high for the control input (IN)
VIL
Maximum input voltage for logic low for the control input (IN)
VI
Voltage at the control input (IN)
IIH, IIL
Leakage current measured at the control input (IN)
tON
Turn-on time for the switch. This parameter is measured under the specified range of conditions and by the
propagation delay between the digital control (IN) signal and analog output (COM, NC, or NO) signal when the
switch is turning ON.
tOFF
Turn-off time for the switch. This parameter is measured under the specified range of conditions and by the
propagation delay between the digital control (IN) signal and analog output (COM, NC, or NO) signal when the
switch is turning OFF.
tMBB
Make-before-break time. This parameter is measured under the specified range of conditions and by the
propagation delay between the output of two adjacent analog channels (NC and NO) when the control signal
changes state.
QC
Charge injection is a measurement of unwanted signal coupling from the control (IN) input to the analog (NC, NO,
or COM) output. This is measured in coulomb (C) and measured by the total charge induced due to switching of
the control input. Charge injection, QC = CL×∆ VCOM, CL is the load capacitance and ∆VCOM is the change in
analog output voltage.
CNC(OFF)
Capacitance at the NC port when the corresponding channel (NC to COM) is OFF
CNO(OFF)
Capacitance at the NO port when the corresponding channel (NO to COM) is OFF
CNC(ON)
Capacitance at the NC port when the corresponding channel (NC to COM) is ON
CNO(ON)
Capacitance at the NO port when the corresponding channel (NO to COM) is ON
CCOM(ON)
Capacitance at the COM port when the corresponding channel (COM to NC or COM to NO) is ON
CI
Capacitance of control input (IN)
OISO
OFF isolation of the switch is a measurement of OFF-state switch impedance. This is measured in dB in a specific
frequency, with the corresponding channel (NC to COM or NO to COM) in the OFF state.
XTALK
Crosstalk is a measurement of unwanted signal coupling from an ON channel to an OFF channel (NC to NO or NO
to NC). This is measured in a specific frequency and in dB.
BW
Bandwidth of the switch. This is the frequency in which the gain of an ON channel is –3 dB below the DC gain.
THD
Total harmonic distortion describes the signal distortion caused by the analog switch. This is defined as the ratio of
root mean square (RMS) value of the second, third, and higher harmonic to the absolute magnitude of the
fundamental harmonic.
I+
Static power-supply current with the control (IN) pin at V+ or GND
Submit Documentation Feedback
15
TS5A23160
0.9-Ω DUAL SPDT ANALOG SWITCH
5-V/3.3-V 2-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER
www.ti.com
SCDS210A – AUGUST 2005 – REVISED APRIL 2006
PARAMETER MEASUREMENT INFORMATION
V+
VNC NC
COM
+
VCOM
Channel ON
VNO NO
r on
IN
VI
ICOM
VCOM VNO or VNC
I COM
VI = VIH or VIL
+
GND
Figure 14. ON-State Resistance (ron)
V+
VNC NC
COM
+
VCOM
+
VNO NO
IN
OFF-State Leakage Current
Channel OFF
VI = VIH or VIL
VI
+
GND
Figure 15. OFF-State Leakage Current (INC(OFF), INC(PWROFF), INO(OFF), INO(PWROFF), ICOM(OFF), ICOM(PWROFF))
V+
VNC NC
COM
+
VNO NO
VI
VCOM
ON-State Leakage Current
Channel ON
VI = VIH or VIL
IN
+
GND
Figure 16. ON-State Leakage Current (ICOM(ON), INC(ON), INO(ON))
16
Submit Documentation Feedback
TS5A23160
0.9-Ω DUAL SPDT ANALOG SWITCH
5-V/3.3-V 2-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER
www.ti.com
SCDS210A – AUGUST 2005 – REVISED APRIL 2006
PARAMETER MEASUREMENT INFORMATION (continued)
V+
Capacitance
Meter
VNC
NC
VNO
NO
VBIAS = V+ or GND
VI = V+ or GND
VCOM COM
VBIAS
VI
Capacitance is measured at NC,
NO, COM, and IN inputs during
ON and OFF conditions.
IN
GND
Figure 17. Capacitance (CI, CCOM(ON), CNC(OFF), CNO(OFF), CNC(ON), CNO(ON))
V+
VCOM
NC or NO
VNC or VNO
NC or NO
CL(2)
TEST
RL
CL
VCOM
tON
50 Ω
35 pF
V+
tOFF
50 Ω
35 pF
V+
COM
RL
IN
VI
Logic
Input(1)
CL(2)
GND
RL
V+
Logic
Input
(VI)
50%
50%
0
tON
Switch
Output
(VNC or VNO)
tOFF
90%
90%
A.
All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω, tr < 5 ns,
tf < 5 ns.
B.
CL includes probe and jig capacitance.
Figure 18. Turn-On (tON) and Turn-Off Time (tOFF)
Submit Documentation Feedback
17
TS5A23160
0.9-Ω DUAL SPDT ANALOG SWITCH
5-V/3.3-V 2-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER
www.ti.com
SCDS210A – AUGUST 2005 – REVISED APRIL 2006
PARAMETER MEASUREMENT INFORMATION (continued)
V+
VNC
NC
VCOM
COM
NO
VI
Logic
Input
(VI)
VNO
CL(2)
RL
Switch
Output
CL(2)
RL
VCOM = V+
RL = 50 Ω
CL = 35 pF
GND
0
VNC
IN
Logic
Input(1)
V+
50%
0.8 VOUT
0.8 VOUT
VNQ
tMBB
A.
All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω, tr < 5 ns,
tf < 5 ns.
B.
CL includes probe and jig capacitance.
Figure 19. Make-Before-Break Time (tMBB)
V+
Network Analyzer
50
VNC
NC
Channel ON: NC to COM
COM
Source
Signal
VCOM
VI = V+ or GND
NO
Network Analyzer Setup
50
VI
+
IN
Source Power = 0 dBm
(632-mV P-P at 50- load)
GND
Figure 20. Bandwidth (BW)
18
Submit Documentation Feedback
DC Bias = 350 mV
TS5A23160
0.9-Ω DUAL SPDT ANALOG SWITCH
5-V/3.3-V 2-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER
www.ti.com
SCDS210A – AUGUST 2005 – REVISED APRIL 2006
PARAMETER MEASUREMENT INFORMATION (continued)
V+
Network Analyzer
Channel OFF: NC to COM
50
VNC
NC
VI = V+ or GND
COM
Source
Signal
50
VCOM
NO
Network Analyzer Setup
IN
Source Power = 0 dBm
(632-mV P-P at 50- load)
VI
50
+
GND
DC Bias = 350 mV
Figure 21. OFF Isolation (OISO)
V+
Network Analyzer
Channel ON: NC to COM
50
VNC
Channel OFF: NO to COM
NC
VCOM
Source
Signal
VNO
NO
VI
50
VI = V+ or GND
50
IN
+
GND
Network Analyzer Setup
Source Power = 0 dBm
(632-mV P-P at 50- load)
DC Bias = 350 mV
A.
All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω, tr < 5 ns,
tf < 5 ns.
B.
CL includes probe and jig capacitance.
Figure 22. Crosstalk (XTALK)
Submit Documentation Feedback
19
TS5A23160
0.9-Ω DUAL SPDT ANALOG SWITCH
5-V/3.3-V 2-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER
www.ti.com
SCDS210A – AUGUST 2005 – REVISED APRIL 2006
PARAMETER MEASUREMENT INFORMATION (continued)
V+
RGEN
VGEN
Logic
Input
(VI)
OFF
ON
OFF V
IL
NC or NO
COM
+
VIH
VCOM
∆VCOM
VCOM
NC or NO
CL(2)
VI
VGEN = 0 to V+
IN
Logic
Input(1)
A.
RGEN = 0
CL = 1 nF
QC = CL × ∆VCOM
VI = VIH or VIL
GND
CL includes probe and jig capacitance.
Figure 23. Charge Injection (QC)
Channel ON: COM to NO
VSOURCE = V+ P-P
VI = VIH or VIL
RL = 600 Ω
fSOURCE = 20 Hz to 20 kHz
CL = 50 pF
V+/2
V+
Audio Analyzer
RL
10 F
Source
Signal
COM
600
NC
600
VI
IN
GND
600
Figure 24. Total Harmonic Distortion (THD)
20
10 F
NO
Submit Documentation Feedback
CL(1)
PACKAGE OPTION ADDENDUM
www.ti.com
14-Oct-2022
PACKAGING INFORMATION
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
(2)
Lead finish/
Ball material
MSL Peak Temp
Op Temp (°C)
Device Marking
(3)
Samples
(4/5)
(6)
TS5A23160DGSR
ACTIVE
VSSOP
DGS
10
2500
RoHS & Green
NIPDAU
Level-1-260C-UNLIM
-40 to 85
JLR
Samples
TS5A23160DGST
ACTIVE
VSSOP
DGS
10
250
RoHS & Green
NIPDAU
Level-1-260C-UNLIM
-40 to 85
JLR
Samples
TS5A23160DGSTG4
ACTIVE
VSSOP
DGS
10
250
RoHS & Green
NIPDAU
Level-1-260C-UNLIM
-40 to 85
JLR
Samples
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance
do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may
reference these types of products as "Pb-Free".
RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption.
Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of