Order
Now
Product
Folder
Support &
Community
Tools &
Software
Technical
Documents
TS5MP645
SCDS385B – JANUARY 2018 – REVISED JULY 2018
TS5MP645 4-Data Lane 2:1 MIPI Switch (10-Channel, 2:1 Analog Switch)
1 Features
3 Description
•
•
•
The TS5MP645 is a four data lane MIPI switch. This
device is an optimized 10 channel (5 differential)
single-pole, double-throw switch for use in high speed
applications. The TS5MP645 is designed to facilitate
multiple MIPI compliant devices to connect to a single
CSI/DSI, C-PHY/D-PHY module.
1
•
•
•
•
•
•
•
Supply Range of 1.65 V to 5.5 V
10-Channel 2:1 Switch
Powered-Off Protection
I/Os Hi-Z when VDD = 0 V
Low RON of 2.45-Ω Typical
Low CON of 1.5 pF
Minimum bandwidth of 1.5 GHz
Ultra Low Crosstalk of -40 dB
Low Power Disable Mode
1.8-V Compatible Logic Inputs
ESD Protection Exceeds JESD 22
– 2000-V Human Body Model (HBM)
The device has excellent bandwidth, low channel to
channel skew with little signal degradation, and wide
margins to compensate for layout losses. The low
current consumption meets the need of low power
applications.
Device Information(1)
PART NUMBER
TS5MP645
2 Applications
•
•
•
•
•
PACKAGE
DSBGA (YFP)
BODY SIZE (NOM)
2.42 mm x 2.42 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Mobile Phones
Tablet
PC/Notebook
Virtual Reality
Augmented Reality
Simplified Schematic
1.65 V ± 5.5 V
100 nF
2.2 µF
CLK
VDD
Data[1:4]
CLK
MIPI Module 1
CLK
TS5MP645
4-Data Lane
MIPI Switch
Data[1:4]
Processor
Data[1:4]
MIPI Module 2
SEL
/OE
Copyright © 2018, Texas Instruments Incorporated
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.
TS5MP645
SCDS385B – JANUARY 2018 – REVISED JULY 2018
www.ti.com
Table of Contents
1
2
3
4
5
6
7
8
Features ..................................................................
Applications ...........................................................
Description .............................................................
Revision History.....................................................
Pin Configuration and Functions .........................
Specifications.........................................................
1
1
1
2
3
5
6.1
6.2
6.3
6.4
6.5
6.6
5
5
5
5
6
9
Absolute Maximum Ratings ......................................
ESD Ratings..............................................................
Recommended Operating Conditions.......................
Thermal Information ..................................................
Electrical Characteristics...........................................
Typical Characteristics ..............................................
Parameter Measurement Information ................ 10
Detailed Description ............................................ 16
8.1 Overview ................................................................. 16
8.2 Functional Block Diagram ....................................... 16
8.3 Feature Description................................................. 17
8.4 Device Functional Modes........................................ 19
9
Application and Implementation ........................ 20
9.1 Application Information............................................ 20
9.2 Typical Application ................................................. 20
10 Power Supply Recommendations ..................... 21
11 Layout................................................................... 22
11.1 Layout Guidelines ................................................. 22
11.2 Layout Example .................................................... 22
12 Device and Documentation Support ................. 23
12.1
12.2
12.3
12.4
12.5
12.6
Documentation Support .......................................
Receiving Notification of Documentation Updates
Community Resources..........................................
Trademarks ...........................................................
Electrostatic Discharge Caution ............................
Glossary ................................................................
23
23
23
23
23
23
13 Mechanical, Packaging, and Orderable
Information ........................................................... 23
4 Revision History
NOTE: Page numbers for previous revisions may differ from page numbers in the current version.
Changes from Revision A (March 2018) to Revision B
•
Changed the IOFF Test conditions From: VDD = 1.65 V to 5.5 V To: VDD = 0 V, 1.65 V to 5.5 V in the Electrical
Characteristics table .............................................................................................................................................................. 6
Changes from Original (January 2018) to Revision A
•
2
Page
Page
Changed the BODY SIZE (NOM) in the Device Information table From: 2.459 x 2.459 To: 2.42 x 2.42 .............................. 1
Submit Documentation Feedback
Copyright © 2018, Texas Instruments Incorporated
Product Folder Links: TS5MP645
TS5MP645
www.ti.com
SCDS385B – JANUARY 2018 – REVISED JULY 2018
5 Pin Configuration and Functions
DSBGA Package
36 Pin (YFP)
Top View
1
2
3
4
5
6
A
VDD
GND
DA4N
DA4P
OE
SEL
B
DB4N
DB4P
DA3N
DA3P
D4N
D4P
C
DB3N
DB3P
NC
NC
D3N
D3P
D
DB2N
DB2P
DA2N
DA2P
D2N
D2P
E
DB1N
DB1P
DA1N
DA1P
D1N
D1P
F
CLKBN
CLKBP
CLKAN
CLKAP
CLKN
CLKP
Not to scale
Pin Functions
PIN
I/O
DESCRIPTION
NAME
NO.
VDD
A1
PWR
Power supply input
GND
A2
GND
Device Ground
DA4N
A3
I/O
Differential I/O
DA4P
A4
I/O
Differential I/O
OE
A5
I
Output enable (Active Low)
SEL
A6
I
Channel Select
DB4N
B1
I/O
Differential I/O
DB4P
B2
I/O
Differential I/O
DA3N
B3
I/O
Differential I/O
DA3P
B4
I/O
Differential I/O
D4N
B5
I/O
Differential I/O
D4P
B6
I/O
Differential I/O
DB3N
C1
I/O
Differential I/O
DB3P
C2
I/O
Differential I/O
NC
C3
-
No connect
NC
C4
-
No connect
D3N
C5
I/O
Differential I/O
D3P
C6
I/O
Differential I/O
DB2N
D1
I/O
Differential I/O
DB2P
D2
I/O
Differential I/O
DA2N
D3
I/O
Differential I/O
Submit Documentation Feedback
Copyright © 2018, Texas Instruments Incorporated
Product Folder Links: TS5MP645
3
TS5MP645
SCDS385B – JANUARY 2018 – REVISED JULY 2018
www.ti.com
Pin Functions (continued)
PIN
I/O
DESCRIPTION
NAME
NO.
DA2P
D4
I/O
Differential I/O
D2N
D5
I/O
Differential I/O
D2P
D6
I/O
Differential I/O
DB1N
E1
I/O
Differential I/O
DB1P
E2
I/O
Differential I/O
DA1N
E3
I/O
Differential I/O
DA1P
E4
I/O
Differential I/O
D1N
E5
I/O
Differential I/O
D1P
E6
I/O
Differential I/O
CLKBN
F1
I/O
Differential I/O
CLKBP
F2
I/O
Differential I/O
CLKAN
F3
I/O
Differential I/O
CLKAP
F4
I/O
Differential I/O
CLKN
F5
I/O
Differential I/O
CLKP
F6
I/O
Differential I/O
4
Submit Documentation Feedback
Copyright © 2018, Texas Instruments Incorporated
Product Folder Links: TS5MP645
TS5MP645
www.ti.com
SCDS385B – JANUARY 2018 – REVISED JULY 2018
6 Specifications
6.1 Absolute Maximum Ratings
Over operating free-air temperature range (unless otherwise noted) (1)
(2)
MIN
MAX
UNIT
VDD
Supply Voltage
-0.5
6
V
VI/O
Analog voltage range (DxN, CLKN, DxP, CLKP, DAxN, CLKAN, DAxP, CLKAP, DBxN,
CLKBN, DBxP, CLKBP)
-0.5
4
V
VSEL , VOE
Digital Input Voltage (SEL, OE)
-0.5
6
V
TJ
Junction temperature
-65
150
°C
Tstg
Storage temperature
-65
150
°C
(1)
(2)
Stresses beyond those listed under Absolute Maximum Rating may cause permanent damage to the device. These are stress ratings
only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended
Operating Condition. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
All voltage are with respect to ground, unless otherwise specified
6.2 ESD Ratings
VALUE
V(ESD)
(1)
(2)
Electrostatic discharge
Human body model (HBM), per
ANSI/ESDA/JEDEC JS-001, all pins (1)
±2000
Charged device model (CDM), per JEDEC
specification JESD22-C101, all pins (2)
±250
UNIT
V
JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.
JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.
6.3 Recommended Operating Conditions
Over operating free-air temperature range (unless otherwise noted)
MIN
VDD
Supply Voltage
VI/O
Analog voltage range (DxN, CLKN, DxP, CLKP, DAxN, CLKAN, DAxP,
CLKAP, DBxN, CLKBN, DBxP, CLKBP)
VSEL, VOE
Digital Input Voltage (SEL, OE)
II/O
Continuous I/O current
TA
Operating ambient temperature
TJ
Junction temperature
NOM
MAX
UNIT
1.65
5.5
V
0
3.6
V
0
5.5
V
-35
35
mA
-40
85
°C
-65
150
°C
6.4 Thermal Information
TS5MP645
THERMAL METRIC (1)
YFP
UNIT
36
RθJA
Junction-to-ambient thermal resistance
57.6
°C/W
RθJC(top)
Junction-to-case (top) thermal resistance
0.3
°C/W
RθJB
Junction-to-board thermal resistance
12.6
°C/W
ΨJT
Junction-to-top characterization parameter
0.2
°C/W
ΨJB
Junction-to-board characterization parameter
12.7
°C/W
(1)
For more information about traditional and new thermal metrics, see the Semiconductor and IC Package Thermal Metrics application
report.
Submit Documentation Feedback
Copyright © 2018, Texas Instruments Incorporated
Product Folder Links: TS5MP645
5
TS5MP645
SCDS385B – JANUARY 2018 – REVISED JULY 2018
www.ti.com
6.5 Electrical Characteristics
Over operating free-air temperature range (unless otherwise noted)
PARAMETER
TEST CONDITIONS
MIN
TYP
MAX
UNIT
POWER SUPPLY
IDD
Active Supply Current
VDD = 1.65 V to 5.5 V
OE = 0 V
SEL = 0 V to 5.5 V
Dn, CLKn = 0 V
0
30
60
µA
IDD_PD
Power-down Supply current
VDD = 1.65 V to 5.5 V
OE = VDD
SEL = 0 V to 5.5 V
Dn, CLKn = 0 V
0
0.1
1
µA
Power-down Supply current
VDD = 1.65 V to 5.5 V
OE = 1.8 V
SEL = 0 V to 5.5 V
Dn, CLKn = 0 V
0
0.1
10
µA
IDD_PD_1.8
DC CHARACTERISTICS
RON_HS
On-state resistance
VDD = 1.65 V to 5.5 V
OE = 0 V
Dn,CLKn = -8 mA, 0.2V
DAn, DBn, CLKAn, CLKBn = 0.2 V, -8 mA
2.45
5.5
Ω
RON_LP
On-state resistance
VDD = 1.65 V to 5.5 V
OE = 0 V
Dn, CLKn = -8 mA, 1.2V
DAn, DBn, CLKAn, CLKBn = 1.2 V, -8 mA
2.65
6.5
Ω
RON_flat_HS
On-state resistance flatness
VDD = 1.65 V to 5.5 V
OE = 0 V
Dn, CLKn = -8 mA, 0 V to 0.3 V
DAn, DBn, CLKAn, CLKBn = 0 V to 0.3 V,-8 mA
0.1
Ω
RON_flat_LP
On-state resistance flatness
VDD = 1.65 V to 5.5 V
OE = 0 V
Dn, CLKn = -8 mA, 0 V to 1.3 V
DAn, DBn, CLKAn, CLKBn = 0 V to 1.3 V, -8 mA
0.9
Ω
ΔRON_HS
On-state resistance match between+and paths
VDD = 1.65 V to 5.5 V
OE = 0 V
Dn, CLKn = -8 mA, 0.2 V
DAn, DBn, CLKAn, CLKBn = 0.2 V, -8 mA
0.1
Ω
ΔRON_LP
On-state resistance match between+and paths
VDD = 1.65 V to 5.5 V
OE = 0 V
Dn, CLKn = -8 mA, 1.2 V
DAn, DBn, CLKAn, CLKBn = 1.2 V, -8 mA
0.1
Ω
Switch off leakage current
VDD = 0 V, 1.65 V to 5.5 V
OE = 0 V to 5.5 V
SEL= 0 V to 5.5 V
Dn, CLKn = 0 V to 1.3 V
DAn, DBn, CLKAn, CLKBn = 0 V to 1.3 V
-0.5
0.5
µA
Switch on leakage current
VDD = 1.65 V to 5.5 V
OE = 0 V
SEL= 0 V to 5.5 V
Dn, CLKn = 0 V to 1.3 V
DAn, DBn, CLKAn, CLKBn = 0 V to 1.3 V
-0.5
0.5
µA
1.5
µs
100
kHz
50
300
µs
50
300
µs
IOFF
ION
DYNAMIC CHARACTERISTICS
tSWITCH
Switching time between channels
fSEL_MAX
Maximum toggling frequency for the SEL
line
tON_OE
Device enable time OE to switch on
tON_VDD
Device enable time VDD to switch on
6
VDD = 1.65 V to 5.5 V
OE = 0 V
Dn, CLKn = 0.6 V
DAn, DBn, CLKAn, CLKBn: RL=50 Ω, CL = 5 pF
VDD = 1.65 V to 5.5 V
Dn, CLKn = 0.6 V
DAn, DBn, CLKAn, CLKBn: RL= 50 Ω, CL=1 pF
VDD = 1.65 V to 5.5 V
Dn, CLKn = 0.6 V
DAn, DBn, CLKAn, CLKBn: RL= 50 Ω, CL= 1 pF
VDD = 0 V to 1.65 V
Dn, CLKn = 0.6 V
DAn, DBn, CLKAn, CLKBn: RL= 50 Ω, CL= 1 pF
Submit Documentation Feedback
Copyright © 2018, Texas Instruments Incorporated
Product Folder Links: TS5MP645
TS5MP645
www.ti.com
SCDS385B – JANUARY 2018 – REVISED JULY 2018
Electrical Characteristics (continued)
Over operating free-air temperature range (unless otherwise noted)
PARAMETER
TEST CONDITIONS
MIN
TYP
MAX
UNIT
0.5
1
µs
0.5
1
ms
tOFF_OE
Device disable time OE to switch off
VDD = 1.65 V to 5.5 V
Dn, CLKn = 0.6 V
DAn, DBn, CLKAn, CLKBn: RL= 50 Ω, CL= 1 pF
tOFF_VDD
Device disable time VDD to switch off
VDD = 5 V to 0 V
VDD ramp rate = 250 µs
Dn, CLKn = 0.6 V
DAn, DBn, CLKAn, CLKBn: RL = 50 Ω, CL = 1pF
tMIN_OE
Minimum pulse width for OE
tBBM
Break before make time
VDD = 1.65 V to 5.5 V
OE = 0 V
Dn, CLKn = RL = 50 Ω, CL = 1 pF
DAn, DBn, CLKAn, CLKBn: 0.6 V
tSKEW
Intrapair skew
VDD = 1.65 V to 5.5 V
OE = 0 V
Dn, CLKn = 0.3 V
DAn, DBn, CLKAn, CLKBn: RL = 50 Ω, CL = 1 pF
1
ps
Interpair Skew
VDD = 1.65 V to 5.5 V
OE = 0 V
Dn, CLKn = 0.3 V
DAn, DBn, CLKAn, CLKBn: RL = 50 Ω, CL = 1 pF
4
ps
Propagation delay with 100 ps rise time
VDD = 1.65 V to 5.5 V
OE = 0 V
Dn, CLKn = 0.6 V
DAn, DBn, CLKAn, CLKBn: RL = 50 Ω, CL = 1 pF
tRISE = 100 ps
40
ps
Differential off isolation
VDD = 1.65 V
OE = 0 V, VDD
SEL = 0 V, VDD
Dn, CLKn, DAn, DBn, CLKAn, CLKBn: RS = 50 Ω,
RL = 50 Ω, CL = 1 pF
VI/O = 200 mV + 200 mVPP (differential)
f = 1250 MHz
-20
dB
Differential channel to channel crosstalk
VDD = 1.65 V to 5.5 V
OE = 0 V, VDD
SEL = 0 V, VDD
Dn, CLKn, DAn, DBn, CLKAn, CLKBn: RS = 50 Ω,
RL = 50 Ω, CL = 1 pF
VI/O = 200 mV + 200 mVPP (differential)
f = 1250 MHz
-40
dB
Differential Bandwidth
VDD = 1.65 V to 5.5 V
OE = 0 V
SEL = 0 V, VDD
Dn, CLKn, DAn, DBn, CLKAn, CLKBn: RS = 50 Ω,
RL = 50 Ω, CL = 1 pF
VI/O = 200 mV + 200 mVPP (differential)
1.5
Insertion Loss
VDD = 1.65 V to 5.5 V
OE = 0 V
SEL = 0 V, VDD
Dn, CLKn, DAn, DBn, CLKAn, CLKBn: RS = 50 Ω,
RL = 50 Ω, CL = 1 pF
VI/O = 200 mV + 200 mVPP (differential)
f = 100 kHz
-0.4
Off capacitance
VDD = 1.65 V to 5.5 V
OE = 0 V, VDD
SEL = 0 V, VDD
Dn, CLKn, DAn, DBn, CLKAn, CLKBn = 0 V , 0.2 V
f = 1250 MHz
1.5
pF
On capacitance
VDD = 1.65 V to 5.5 V
OE = VDD
SEL = 0 V, VDD
Dn, CLKn, DAn, DBn, CLKAn, CLKBn = 0 V , 0.2 V
f = 1250 MHz
1.5
pF
tSKEW
tPD
OISO
XTALK
BW
ILOSS
COFF
CON
VDD = 1.65 V to 5.5 V
Dn, CLKn = 0.6 V
DAn, DBn, CLKAn, CLKBn: RL = 50 Ω, CL = 1 pF
500
ns
50
ns
2
dB
Submit Documentation Feedback
Copyright © 2018, Texas Instruments Incorporated
Product Folder Links: TS5MP645
GHz
7
TS5MP645
SCDS385B – JANUARY 2018 – REVISED JULY 2018
www.ti.com
Electrical Characteristics (continued)
Over operating free-air temperature range (unless otherwise noted)
PARAMETER
TEST CONDITIONS
MIN
TYP
MAX
UNIT
DIGITAL CHARACTERISTICS
VIH
Input logic high (SEL, OE)
VI/O = 0.6 V, RL = 50 Ω, CL = 5 pF
1.425
5.5
VIL
Input logic low (SEL, OE)
VI/O = 0.6 V, RL = 50 Ω, CL = 5 pF
0
0.5
V
IIH
Input high leakage current (SEL, OE)
VI/O = 0.6 V, RL = 50 Ω, CL = 5 pF
-5
5
µA
IIL
Input low leakage current (SEL, OE)
VI/O = 0.6 V, RL = 50 Ω,CL = 5 pF
-5
5
µA
RPD
Internal pull-down resistance on digital
input pins
VI/O = 0.6 V, RL = 50 Ω, CL = 5 pF
6
MΩ
CSEL, COE
Digital Input capacitance (SEL, OE)
f = 1 MHz
5
pF
8
Submit Documentation Feedback
V
Copyright © 2018, Texas Instruments Incorporated
Product Folder Links: TS5MP645
TS5MP645
www.ti.com
SCDS385B – JANUARY 2018 – REVISED JULY 2018
6.6 Typical Characteristics
4.5
4.5
RON (-40°C)
RON (25°C)
RON (85°C)
4
4
3.5
3.5
RON (:)
RON (:)
RON (-40°C)
RON (25°C)
RON (85°C)
3
3
2.5
2.5
2
2
1.5
1.5
0
0.2
0.4
0.6
0.8
Input Voltage (V)
1
1.2
1.4
0
Figure 1. RON vs Input Voltage. VDD = 1.65 V
RON (-40°C)
RON (25°C)
RON (85°C)
4
Gain (dB)
RON (:)
3.5
3
2.5
2
1.5
0.2
0.4
0.6
0.8
Input Voltage (V)
1
1.2
1.4
0
-1
-2
-3
-4
-5
-6
-7
-8
-9
-10
-11
-12
-13
-14
300000
0.6
0.8
Input Voltage (V)
1
1.2
D002
1E+7
1E+8
Frequency (Hz)
1E+9
-20
-20
-40
-40
Gain (dB)
0
-60
D001
-60
-80
-80
-100
-100
Off Isolation
1000000
1E+7
1E+8
Frequency (Hz)
1E+9
1E+10
Figure 4. Differential Bandwidth
0
-120
100000
1.4
Bandwidth
D004
Figure 3. RON vs Input Voltage. VDD = 5.5 V
Gain (dB)
0.4
Figure 2. RON vs Input Voltage. VDD = 3.3 V
4.5
0
0.2
D003
Crosstalk
1E+10
-120
200000 1000000
D002
Figure 5. Off Isolation
1E+7
1E+8
Frequency (Hz)
1E+9
1E+10
D003
Figure 6. Differential Crosstalk
Submit Documentation Feedback
Copyright © 2018, Texas Instruments Incorporated
Product Folder Links: TS5MP645
9
TS5MP645
SCDS385B – JANUARY 2018 – REVISED JULY 2018
www.ti.com
7 Parameter Measurement Information
Channel ON
RON = V/ION
V
VI/O
ION
Switch
Copyright © 2018, Texas Instruments Incorporated
Figure 7. On Resistance
VI/O
VI/O
A
A
Switch
Figure 8. Off Leakage
VI/O
A
Switch
Figure 9. On Leakage
VI/OA
VI/O
VI/OB
SEL
CL
CL
RL
RL
VSEL
1.8 V
VSEL
VIL
1.8 V
VSEL
VIH
VIH
VIL
0V
tSWITCH
tSWITCH
VI/OA
80
%
0V
tSWITCH
tSWITCH
VI/O
20 %
VI/O
80 %
VI/OB
0V
20 %
0V
Copyright © 2018, Texas Instruments Incorporated
(1)
All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω , tr = 3 ns,
tf = 3 ns.
(2)
CL includes probe and jig capacitance.
Figure 10. tSWITCH timing
10
Submit Documentation Feedback
Copyright © 2018, Texas Instruments Incorporated
Product Folder Links: TS5MP645
TS5MP645
www.ti.com
SCDS385B – JANUARY 2018 – REVISED JULY 2018
Parameter Measurement Information (continued)
1.65 V
VDD
VI/O
VI/O
CL
/OE
1.8 V
RL
V/OE
VIH
VIL
0V
tOFF
tON
VI/O
V/OE
90 %
VI/O
10 %
0V
Copyright © 2018, Texas Instruments Incorporated
(1)
All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω , tr = 3 ns,
tf = 3 ns.
(2)
CL includes probe and jig capacitance.
Figure 11. tON and tOFF Timing for OE
Network Analyzer
50
Switch
DXP
50
Source
Signal
50
DXN
50
Source
Signal
50
50
Copyright © 2018, Texas Instruments Incorporated
Figure 12. Off Isolation
Submit Documentation Feedback
Copyright © 2018, Texas Instruments Incorporated
Product Folder Links: TS5MP645
11
TS5MP645
SCDS385B – JANUARY 2018 – REVISED JULY 2018
www.ti.com
Parameter Measurement Information (continued)
Network Analyzer
50
Switch
DXP
50
Source
Signal
50
50
DXN
50
Source
Signal
50
DXP
50
50
50
DXN
50
50
50
Copyright © 2018, Texas Instruments Incorporated
Figure 13. Crosstalk
Network Analyzer
50
Switch
DXN
50
Source
Signal
50
DXP
50
Source
Signal
50
50
Copyright © 2017, Texas Instruments Incorporated
Figure 14. BW and Insertion Loss
12
Submit Documentation Feedback
Copyright © 2018, Texas Instruments Incorporated
Product Folder Links: TS5MP645
TS5MP645
www.ti.com
SCDS385B – JANUARY 2018 – REVISED JULY 2018
Parameter Measurement Information (continued)
Generator
Switch
50
D1P
DX1P
Source
Signal
50
50
50
D1N
Source
Signal
DX1N
50
50
50
D2P
DX2P
Source
Signal
50
50
50
D2N
Source
Signal
DX2N
50
50
50
D3P
DX3P
Source
Signal
50
50
50
D3N
Source
Signal
DX3N
50
50
50
D4P
DX4P
Source
Signal
50
50
50
D4N
Source
Signal
DX4N
50
50
50
CLKP
CLKXP
Source
Signal
50
50
50
CLKN
Source
Signal
CLKXN
50
50
Copyright © 2017, Texas Instruments Incorporated
Figure 15. tPD, tSKEW(INTRA) and tSKEW Setup
Submit Documentation Feedback
Copyright © 2018, Texas Instruments Incorporated
Product Folder Links: TS5MP645
13
TS5MP645
SCDS385B – JANUARY 2018 – REVISED JULY 2018
www.ti.com
Parameter Measurement Information (continued)
DXX/CLKX
50%
50%
tPD
tPD
DXXX/CLKXX
50%
50%
(1)
All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω , tr = 100
ps, tf = 100 ps.
(2)
CL includes probe and jig capacitance.
Figure 16. tPD
DXX/CLKX
50%
50%
tSKEW
DXXX/CLKXX
tSKEW
50%
50%
(1)
All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω , tr = 100
ps, tf = 100 ps.
(2)
CL includes probe and jig capacitance.
Figure 17. tSKEW
14
Submit Documentation Feedback
Copyright © 2018, Texas Instruments Incorporated
Product Folder Links: TS5MP645
TS5MP645
www.ti.com
SCDS385B – JANUARY 2018 – REVISED JULY 2018
Parameter Measurement Information (continued)
tSKEW
DX/CLKX
tSKEW
tSKEW
DX1
50%
50%
DX2
50%
50%
DX3
50%
DX4
50%
CLK
50%
50%
50%
50%
(1)
All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω , tr = 100
ps, tf = 100 ps.
(2)
CL includes probe and jig capacitance.
(3)
tSK(INTER) is the max skew between all channels. Diagram exaggerates tSK(INTER) to show measurement technique
Figure 18. tSKEW
0.6 V
VI/O
VSEL
CL
RL
SEL
VI/O
VSEL
80 %
tBBM
0.6 V
tBBM
Copyright © 2017, Texas Instruments Incorporated
(1)
All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω , tr = 3 ns,
tf = 3 ns.
(2)
CL includes probe and jig capacitance.
Figure 19. tBBM
Submit Documentation Feedback
Copyright © 2018, Texas Instruments Incorporated
Product Folder Links: TS5MP645
15
TS5MP645
SCDS385B – JANUARY 2018 – REVISED JULY 2018
www.ti.com
8 Detailed Description
8.1 Overview
The TS5MP645 is a high-speed 4 Data lane 2:1 MIPI Switch. The device includes 10 channels (5 differential)
with 4 differential data lanes and 1 differential clock lane for D-PHY, CSI or DSI. The switch allows a single MIPI
port to interface between two MIPI modules, expanding the number of potential MIPI devices that can be used
within a system that is MIPI port limited.
8.2 Functional Block Diagram
VDD
SEL
6 MO
Control
Logic
/OE
6 MO
CLKAP
CLKP
CLKBP
CLKAN
CLKN
CLKBN
DA1P
D1P
DB1P
DA1N
D1N
DB1N
DA2P
D2P
DB2P
DA2N
D2N
DB2N
DA3P
D3P
DB3P
DA3N
D3N
DB3N
DA4P
D4P
DB4P
DA4N
D4N
DB4N
GND
Copyright © 2018, Texas Instruments Incorporated
16
Submit Documentation Feedback
Copyright © 2018, Texas Instruments Incorporated
Product Folder Links: TS5MP645
TS5MP645
www.ti.com
SCDS385B – JANUARY 2018 – REVISED JULY 2018
8.3 Feature Description
8.3.1
Powered-Off Protection
When the TS5MP645 is powered off (VDD = 0 V) the I/Os and digital logic pins of the device will remain in a high
impedance state. The crosstalk, off-isolation, and leakage remains within the electrical specifications. This
prevents errant voltages from reaching the rest of the system and maintains isolation when the system is
powering up.
Figure 20 shows an example system containing a switch without powered-off protection with the following system
level scenario
1. Subsystem A powers up and starts sending information to Subsystem B that remains unpowered.
2. The I/O voltage back powers the supply rail in Subsystem B.
3. The digital logic is back powered and turns on the switch. The signal is transmitted to Subsystem B before it
is powered and damages it.
Unpowered
Powered
LDO
2
VDD
Subsystem A
1
ESD
SEL
Switch
Subsystem B
3
Figure 20. System Without Powered-Off Protection
With powered-off protection, the switch prevents back powering the supply and the switch remains highimpedance. Subsystem B remains protected.
Unpowered
Powered
LDO
VDD
Protection
Subsystem A
ESD
SEL
Subsystem B
Hi-Z
Switch
Figure 21. System With Powered-Off Protection
This features has the following system level benefits.
•
•
•
Protects the system from damage.
Prevents data from being transmitted unintentionally
Eliminates the need for power sequencing solutions reducing BOM count and cost, simplifying system design
and improving reliability.
Submit Documentation Feedback
Copyright © 2018, Texas Instruments Incorporated
Product Folder Links: TS5MP645
17
TS5MP645
SCDS385B – JANUARY 2018 – REVISED JULY 2018
www.ti.com
Feature Description (continued)
8.3.2
1.8 V Logic Compatible Inputs
The TS5MP645 has 1.8 V logic compatible digital inputs for switch control. Regardless of the VDD voltage the
digital input thresholds remained fixed, allowing a 1.8 V processor GPIO to control the TS5MP645 without the
need for an external translator. This saves both space and BOM cost.
An example setup for a system without a 1.8 V logic compatible input is shown in Figure 22. Here the supply
mismatch between the process and its GPIO output and the supply to the switch require a translator.
3.3 V
1.8 V
Processor
GPIO
VDD
SEL
1.8 V
Switch
Figure 22. System Without 1.8 V Logic Compatible Inputs
With the 1.8 V logic compatibility in the TS5MP645, the translator is built in to the device so that the external
components are no longer needed, simplifying the system design and overall cost.
3.3 V
1.8 V
VDD
Processor
GPIO
1.8 V
SEL
Switch
Figure 23. System With 1.8 V Logic Compatible Inputs
8.3.3
Low Power Disable Mode
The TS5MP645 has a low power mode that places all the signal paths in a high impedance state and lowers the
current consumption while the device is not in use. To put the device in low power mode and disable the switch,
the output enable pin OE must be supplied with a logic high signal.
18
Submit Documentation Feedback
Copyright © 2018, Texas Instruments Incorporated
Product Folder Links: TS5MP645
TS5MP645
www.ti.com
SCDS385B – JANUARY 2018 – REVISED JULY 2018
8.4 Device Functional Modes
8.4.1 Pin Functions
SEL and OE have weak 6-MΩ pulldown resistors to prevent floating input logic.
Table 1. Function Table
8.4.2
OE
SEL
H
X
L
L
L
H
Function
I/O pins High-Impedance
CLK(P/N) = CLKA(P/N)
Dn(P/N) = DAn(P/N)
CLK(P/N) = CLKB(P/N)
Dn(P/N) = DBn(P/N)
Low Power Mode
While the output enable pin OE is supplied with a logic high the device remains in low power state. This reduces
the current consumption substantially and the switches are be high impedance. The SEL pin is ignored while the
OE remains high. Upon exiting low power mode, the switch status reflects the SEL pin as seen in Table 1.
8.4.3
Switch Enabled Mode
While the output enable pin OE is supplied with a logic low the device will remain in switch enabled mode.
Submit Documentation Feedback
Copyright © 2018, Texas Instruments Incorporated
Product Folder Links: TS5MP645
19
TS5MP645
SCDS385B – JANUARY 2018 – REVISED JULY 2018
www.ti.com
9 Application and Implementation
NOTE
Information in the following applications sections is not part of the TI component
specification, and TI does not warrant its accuracy or completeness. TI’s customers are
responsible for determining suitability of components for their purposes. Customers should
validate and test their design implementation to confirm system functionality.
9.1 Application Information
9.2 Typical Application
Figure 24 represents a typical application of the TS5MP645 MIPI switch. The TS5MP645 is used to switch
signals between multiple MIPI modules and a single MIPI port on a processor. This expands the capabilities of a
single port to handle multiple MIPI modules.
1.65 V ± 5.5 V
100 nF
2.2 µF
VDD
CLK
Data[1:4]
CLK
MIPI Module 1
TS5MP645
4-Data Lane
MIPI Switch
CLK
Data[1:4]
Processor
Data[1:4]
MIPI Module 2
SEL
/OE
Figure 24. Typical TS5MP645 Application
9.2.1 Design Requirements
Design requirements of the MIPI standard being used must be followed. Supply pin decoupling capacitors of 2.2
µF and 100 nF are recommended for best performance. The TS5MP645 has internal 6-MΩ pulldown resistors on
SEL and OE. The pulldown on these pins ensure that the digital remains in a non-floating state during system
power-up to prevent shoot through current spikes and an unknown switch status. By default the switch will power
up enabled and with the A path selected until driven externally by the processor.
9.2.2 Detailed Design Procedure
The TS5MP645 can be properly operated without any external components. However, TI recommends that
unused I/O signal pins be connected to ground through a 50 Ω resistor to prevent signal reflections and maintain
device performance. The NC pins of the device do not require any external connections or terminations and have
no connection to the rest of the device internally.
The clock and data lanes can be interchanged as necessary to facilitate the best layout possible for the
application. For example the clock can be placed on the D1 channel and a data lane can be used on the CLK
channel if this improves the layout. In addition the signal lines of the TS5MP645 are routed single ended on the
chip die. This makes the device suitable for both differential and single-ended high-speed systems.
20
Submit Documentation Feedback
Copyright © 2018, Texas Instruments Incorporated
Product Folder Links: TS5MP645
TS5MP645
www.ti.com
SCDS385B – JANUARY 2018 – REVISED JULY 2018
Typical Application (continued)
Gain (dB)
9.2.3 Application Curves
0
-1
-2
-3
-4
-5
-6
-7
-8
-9
-10
-11
-12
-13
-14
300000
Bandwidth
1E+7
1E+8
Frequency (Hz)
1E+9
1E+10
D001
Figure 25. Differential Bandwidth
10 Power Supply Recommendations
When the TS5MP645 is powered off (VDD = 0 V), the I/Os of the device remains in a high-Z state. The crosstalk,
off-isolation, and leakage remain within the electrical Specifications. Power to the device is supplied through the
VDD pin. Decoupling capacitors of 100 nF and 2.2 µF are recommended on the supply.
Submit Documentation Feedback
Copyright © 2018, Texas Instruments Incorporated
Product Folder Links: TS5MP645
21
TS5MP645
SCDS385B – JANUARY 2018 – REVISED JULY 2018
www.ti.com
11 Layout
11.1 Layout Guidelines
Place the supply de-coupling capacitors as close to the VDD and GND pin as possible. The spacing between the
power traces, supply and ground, and the signal I/O lines, clock and data, should be a minimum of three times
the race width of the signal I/O lines to maintain signal integrity.
The characteristic impedance of the trace(s) must match that of the receiver and transmitter to maintain signal
integrity. Route the high-speed traces using a minimum amount of vias and corners. This will reduce the amount
of impedance changes.
When it becomes necessary to make the traces turn 90°, use two 45° turns or an arc instead of making a single
90° turn.
Do not route high-speed traces near crystals, oscillators, external clock signals, switching regulators, mounting
holes or magnetic devices.
Avoid stubs on the signal lines.
All I/O signal traces should be routed over a continuous ground plane with no interruptions. The minimum width
from the edge of the trace to any break in the ground plane must be 3 times the trace width. When routing on
PCB inner signal layers, the high speed traces should be between two ground planes and maintain characteristic
impedance.
High speed signal traces must be length matched as much as possible to minimize skew between data and clock
lines.
11.2 Layout Example
VIA to
power plane
VIA to
ground plane
C
To Control
Logic
C
To MIPI
Modules
VDD
GND
DA4
N
DA4
P
/OE
SEL
DB4
N
DB4
P
DA3
N
DA3
P
D4N
D4P
DB3
N
DB3
P
NC
NC
D3N
D3P
DB2
N
DB2
P
DA2
N
DA2
P
D2N
D2P
DB1
N
DB1
P
DA1
N
DA1
P
D1N
D1P
CLK
BN
CLK
BP
CLK
AN
CLK
AP
CLK
N
CLK
P
To MIPI Port
Figure 26. Layout Example
22
Submit Documentation Feedback
Copyright © 2018, Texas Instruments Incorporated
Product Folder Links: TS5MP645
TS5MP645
www.ti.com
SCDS385B – JANUARY 2018 – REVISED JULY 2018
12 Device and Documentation Support
12.1 Documentation Support
12.2 Receiving Notification of Documentation Updates
To receive notification of documentation updates, navigate to the device product folder on ti.com. In the upper
right corner, click on Alert me to register and receive a weekly digest of any product information that has
changed. For change details, review the revision history included in any revised document.
12.3 Community Resources
The following links connect to TI community resources. Linked contents are provided "AS IS" by the respective
contributors. They do not constitute TI specifications and do not necessarily reflect TI's views; see TI's Terms of
Use.
TI E2E™ Online Community TI's Engineer-to-Engineer (E2E) Community. Created to foster collaboration
among engineers. At e2e.ti.com, you can ask questions, share knowledge, explore ideas and help
solve problems with fellow engineers.
Design Support TI's Design Support Quickly find helpful E2E forums along with design support tools and
contact information for technical support.
12.4 Trademarks
E2E is a trademark of Texas Instruments.
All other trademarks are the property of their respective owners.
12.5 Electrostatic Discharge Caution
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
12.6 Glossary
SLYZ022 — TI Glossary.
This glossary lists and explains terms, acronyms, and definitions.
13 Mechanical, Packaging, and Orderable Information
The following pages include mechanical, packaging, and orderable information. This information is the most
current data available for the designated devices. This data is subject to change without notice and revision of
this document. For browser-based versions of this data sheet, refer to the left-hand navigation.
Submit Documentation Feedback
Copyright © 2018, Texas Instruments Incorporated
Product Folder Links: TS5MP645
23
TS5MP645
SCDS385B – JANUARY 2018 – REVISED JULY 2018
www.ti.com
PACKAGE OUTLINE
YFP0036
DSBGA - 0.5 mm max height
SCALE 4.700
DIE SIZE BALL GRID ARRAY
B
A
E
BALL A1
CORNER
D: Max = 2.45 mm, Min = 2.39 mm
D
E: Max = 2.45 mm, Min = 2.39 mm
C
0.5 MAX
SEATING PLANE
BALL TYP
0.19
0.13
0.05 C
2 TYP
SYMM
F
E
D
2
TYP
SYMM
C
B
36X
A
0.4 TYP
1
2
3
4
5
0.25
0.21
0.015
C A
B
6
0.4 TYP
4222013/A 04/2015
NOTES:
1. All linear dimensions are in millimeters. Any dimensions in parenthesis are for reference only. Dimensioning and tolerancing
per ASME Y14.5M.
2. This drawing is subject to change without notice.
www.ti.com
24
Submit Documentation Feedback
Copyright © 2018, Texas Instruments Incorporated
Product Folder Links: TS5MP645
TS5MP645
www.ti.com
SCDS385B – JANUARY 2018 – REVISED JULY 2018
EXAMPLE BOARD LAYOUT
YFP0036
DSBGA - 0.5 mm max height
DIE SIZE BALL GRID ARRAY
36
(0.4) TYP
0.23)
1
2
3
4
6
5
A
(0.4) TYP
B
C
SYMM
D
E
F
SYMM
LAND PATTERN EXAMPLE
SCALE:25X
0.05 MAX
( 0.23)
METAL
METAL UNDER
SOLDER MASK
0.05 MIN
( 0.23)
SOLDER MASK
OPENING
SOLDER MASK
OPENING
NON-SOLDER MASK
DEFINED
(PREFERRED)
SOLDER MASK
DEFINED
SOLDER MASK DETAILS
NOT TO SCALE
4222013/A 04/2015
NOTES: (continued)
3. Final dimensions may vary due to manufacturing tolerance considerations and also routing constraints.
For more information, see Texas Instruments literature number SNVA009 (www.ti.com/lit/snva009).
www.ti.com
Submit Documentation Feedback
Copyright © 2018, Texas Instruments Incorporated
Product Folder Links: TS5MP645
25
TS5MP645
SCDS385B – JANUARY 2018 – REVISED JULY 2018
www.ti.com
EXAMPLE STENCIL DESIGN
YFP0036
DSBGA - 0.5 mm max height
DIE SIZE BALL GRID ARRAY
(0.4) TYP
(R0.05) TYP
36X ( 0.25)
1
2
4
3
5
6
A
(0.4) TYP
B
METAL
TYP
C
SYMM
D
E
F
SYMM
SOLDER PASTE EXAMPLE
BASED ON 0.1 mm THICK STENCIL
SCALE:30X
4222013/A 04/2015
NOTES: (continued)
4. Laser cutting apertures with trapezoidal walls and rounded corners may offer better paste release.
www.ti.com
26
Submit Documentation Feedback
Copyright © 2018, Texas Instruments Incorporated
Product Folder Links: TS5MP645
PACKAGE OPTION ADDENDUM
www.ti.com
10-Dec-2020
PACKAGING INFORMATION
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
(2)
Lead finish/
Ball material
MSL Peak Temp
Op Temp (°C)
Device Marking
(3)
(4/5)
(6)
TS5MP645NYFPR
ACTIVE
DSBGA
YFP
36
3000
RoHS & Green
SNAGCU
Level-1-260C-UNLIM
-40 to 85
TS5MP645
TS5MP645YFPR
ACTIVE
DSBGA
YFP
36
3000
RoHS & Green
SNAGCU
Level-1-260C-UNLIM
-40 to 85
TS5MP645
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance
do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may
reference these types of products as "Pb-Free".
RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption.
Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of