TSB12LV01B
www.ti.com
SLLA212 – JUNE 2006
IEEE 1394-1995 High-Speed Serial-Bus Link-Layer Controller
FEATURES
•
Link Core
– Supports Provision of IEEE 1394-1995
(1394) Standard for High-Performance
Serial Bus
– Transmits and Receives Correctly
Formatted 1394 Packets
– Supports Asynchronous and Isochronous
Data Transfers
– Performs Function of 1394 Cycle Master
– Generates and Checks 32-Bit CRC
– Detects Lost Cycle-Start Messages
– Contains Asynchronous, Isochronous, and
General-Receive FIFOs Totaling 2K Bytes
•
•
•
Physical-Link Interface
– Compatible With Texas Instruments
Physical Layer Devices (PHYs)
– Supports Transfer Speeds of 100, 200, and
400 Mbits/s
– Timing Compliant with IEEE 1394a–2000
Host Bus Interface
– Provides Chip Control With Directly
Addressable Registers
– Is Interrupt Driven to Minimize Host Polling
– Has a Generic 32-Bit Host Bus Interface
General
– Operates From a 3.3-V Power Supply While
Maintaining 5-V Tolerant Inputs
– Manufactured With Low-Power CMOS
Technology
– 100-Pin PZT Package for 0°C to 70°C and
-40°C to 85°C (I Temperature) Operation
DESCRIPTION
The TSB12LV01B is an IEEE 1394-1995 standard (from now on referred to only as 1394) high-speed serial-bus
link-layer controller that allows for easy integration into an I/O subsystem. The TSB12LV01B provides a
high-performance IEEE 1394-1995 interface with the capability of transferring data between the 32-bit host bus,
the 1394 PHY-link interface, and external devices connected to the local bus interface. The 1394 PHY-link
interface provides the connection to the 1394 physical (PHY) layer device and is supported by the link-layer
controller (LLC). The LLC provides the control for transmitting and receiving 1394 packet data between the FIFO
and PHY-link interface at rates of 100 Mbits/s, 200 Mbits/s, and 400 Mbits/s. The TSB12LV01B transmits and
receives correctly-formatted 1394 packets and generates and inspects the 32-bit cyclic redundancy check
(CRC). The TSB12LV01B is capable of being cycle master and supports reception of isochronous data on two
channels. TSB12LV01B has a generic 32-bit host bus interface, which will connect to most 32-bit hosts. The
LLC also provides the capability to receive status from the physical layer device and to access the physical layer
control and status registers by the application software. An internal 2K-byte memory is provided that can be
configured as multiple variable-size FIFOs and eliminates the need for external FIFOs. Separate FIFOs can be
user configured to support general 1394 receive, asynchronous transmit, and isochronous transmit transfer
operations. These functions are accomplished by appropriately sizing the general receive FIFO (GRF),
asynchronous transmit FIFO (ATF), and isochronous transmit FIFO (ITF).
The TSB12LV01B is a revision of the TSB12LV01A, with feature enhancements and corrections. It is pin for pin
compatible with the TSB12LV01A with the restrictions noted below. It is also software compatible with the
extensions noted below.
All errata items to the TSB12LV01A have been fixed, and the following feature enhancements have been made:
• Two new internal registers have been added at CFR address 40h and 44h. The Host Bus Control Register
at 40h and the Mux Control Register @44h .
• Three programmable general-purpose output pins have been added.
• Several pin changes have been made. Refer to TSB12LV01A to TSB12LV01B Transition Document, TI
literature number SLLA081 dated May 2000.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2006, Texas Instruments Incorporated
TSB12LV01B
www.ti.com
SLLA212 – JUNE 2006
However, there are three restrictions that were not present in the TSB12LV01A device:
• The TSB12LV01B may only operate with a 50 MHz host-interface clock (BCLK) if the duty cycle is less than
5% away from the 50-50 point, (i.e., the duty cycle must be within 45-55% inclusive). A 40-60% duty cycle
clock is acceptable for host clock frequencies at or below 47 MHz.
• The TSB12LV01B does not have bus holder cells on the PHY-link interface.
• As a result of removing the bus holder cells, the ISO pin (pin 69) was replaced with a Vcc pin on the
TSB12LV01B.
This document is not intended to serve as a tutorial on 1394; users are referred to the IEEE 1394-1995 serial
bus standard for detailed information regarding the 1394 high-speed serial bus.
NOTE:
This product is for high-volume applications only. For a complete datasheet or more
information contact support@ti.com.
2
Submit Documentation Feedback
PACKAGE OPTION ADDENDUM
www.ti.com
14-Oct-2022
PACKAGING INFORMATION
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
(2)
Lead finish/
Ball material
MSL Peak Temp
Op Temp (°C)
(3)
Device Marking
Samples
(4/5)
(6)
TSB12LV01BPZT
ACTIVE
TQFP
PZT
100
90
RoHS & Green
NIPDAU
Level-4-260C-72 HR
0 to 70
TSB12LV01B
F711934
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance
do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may
reference these types of products as "Pb-Free".
RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption.
Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of
很抱歉,暂时无法提供与“TSB12LV01BPZTG4”相匹配的价格&库存,您可以联系我们找货
免费人工找货