TSM102AIDR

TSM102,, TSM102A DUAL OPERATIONAL AMPLIFIER, DUAL COMPARATOR, AND VOLTAGE REFERENCE www.ti.com SLVS602 – MARCH 2006 FEATURES APPLICATIONS • • • • • • • OPERATIONAL AMPLIFIERS – Low Supply Current…200 µA/A – Medium Speed…2.1 MHz – Low-Level Output Voltage Close to VCC–…0.1 V Typ (RL = 10 kΩ) – Input Common-Mode Voltage Range Includes Ground COMPARATORS – Low Supply Current…200 µA/A (VCC = 5 V) – Input Common-Mode Voltage Range Includes Ground – Low Output Saturation Voltage… Typically 250 mV (Isink = 4 mA) VOLTAGE REFERENCE – Adjustable Output Voltage…VREF to 36 V – Sink Current Capability…1 mA to 100 mA – 0.4% (A Grade) and 1% (Standard Grade) Precision – Latch-Up Immunity • • Switch-Mode Power Supplies Battery Chargers Voltage and Current Sensing Power-Good, Overvoltage, Undervoltage, Overcurrent Detection Window Comparators Alarms, Detectors, and Sensors D (SOIC) OR PW (TSSOP) PACKAGE (TOP VIEW) 1OUT 1 COMP COMP 1IN− 2 16 4OUT 15 4IN− – + + – 1IN+ 3 14 4IN+ VCC+ 4 13 VCC– 12 3IN+ 2IN+ 5 – 2IN− 6 2OUT 7 AMP + + – AMP 11 3IN− 10 3OUT VREF 8 9 CATHODE DESCRIPTION/ORDERING INFORMATION The TSM102 and TMS102A combine the building blocks of a dual operational amplifier, a dual comparator, and a precision voltage reference, all of which often are used to implement a wide variety of power-management functions, including overcurrent detection, undervoltage/overvoltage detection, power-good detection, window comparators, error amplifiers, etc. Additional applications include alarm and detector/sensor applications. The TSM102A offers a tight VREF tolerance of 0.4% at 25°C. The TSM102 and TSM102A are characterized for operation from –40°C to 85°C. ORDERING INFORMATION TA MAX VREF TOLERANCE (25°C) PACKAGE (1) SOIC – D A grade: 0.4% precision TSSOP – PW –40°C to 85°C SOIC – D Standard grade: 1% precision TSSOP – PW (1) ORDERABLE PART NUMBER Tube of 75 TSM102AID Reel of 2500 TSM102AIDR Tube of 90 TSM102AIPW Reel of 2000 TSM102AIPWR Tube of 75 TSM102ID Reel of 2500 TSM102IDR Tube of 90 TSM102IPW Reel of 2000 TSM102IPWR TOP-SIDE MARKING TSM102AI SN102AI TSM102I SN102I Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright © 2006, Texas Instruments Incorporated TSM102,, TSM102A DUAL OPERATIONAL AMPLIFIER, DUAL COMPARATOR, AND VOLTAGE REFERENCE www.ti.com SLVS602 – MARCH 2006 Absolute Maximum Ratings (1) over free-air temperature range (unless otherwise noted) MIN MAX UNIT VCC Supply voltage 36 V VID Input differential voltage 36 V VI Input voltage range IKA Voltage reference cathode current θJA Package thermal impedance (2) (3) TJ Maximum junction temperature Tstg Storage temperature range (1) (2) (3) –0.3 D package 36 V 100 mA 73 PW package °C/W 108 –65 150 °C 150 °C Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable ambient temperature is PD = (TJ(max) – TA)/θJA. Selecting the maximum of 150°C can affect reliability. The package thermal impedance is calculated in accordance with JESD 51-7. Recommended Operating Conditions MIN MAX 3 UNIT VCC+ – VCC– Supply voltage VID Comparator differential input voltage 30 V VCC+ – VCC– VKA Cathode-to-anode voltage VREF 36 V V IK Reference cathode current 1 100 mA TA Operating free-air temperature –40 85 °C Total Device Electrical Characteristics PARAMETER ICC 2 Total supply current, excluding reference cathode current TEST CONDITIONS VCC+ = 5 V, VCC– = 0 V, No load Submit Documentation Feedback TA 25°C Full range MIN TYP MAX 0.8 1.5 2 UNIT mA www.ti.com TSM102,, TSM102A DUAL OPERATIONAL AMPLIFIER, DUAL COMPARATOR, AND VOLTAGE REFERENCE SLVS602 – MARCH 2006 Operational Amplifier Electrical Characteristics VCC+ = 5 V, VCC– = GND, R1 connected to VCC/2 (unless otherwise noted) PARAMETER VIO Input offset voltage αVIO Input offset voltage drift TEST CONDITIONS TA MIN 25°C TYP MAX 1 4.5 Full range IIO Input offset current IIB Input bias current AVD Large-signal voltage gain VCC+ = 30 V, R1 = 10 kΩ, VO = 5 V to 25 V kSVR Supply-voltage rejection ratio VCC+ = 5 V to 30 V 6.5 25°C 10 25°C 5 Full range 25°C 20 100 200 25°C 50 Full range 25 mV µV/°C 20 40 Full range UNIT 100 nA nA V/mV 25°C 80 25°C VCC– 100 VCC+ – 1.8 dB Full range VCC– VCC+ – 2.2 VICM Input common-mode voltage CMRR Common-mode rejection ratio VCC+ = 30 V, VICM = 0 V to VCC+ – 1.8 V ISC Short-circuit current VID = ±1 V, VO = 2.5 V VOH High-level output voltage VCC+ = 30 V, RL = 10 kΩ VOL Low-level output voltage RL = 10 kΩ SR Slew rate VCC = ±15 V, CL = 100 pF, VI = ±10 V, RL = 10 kΩ 25°C 1.3 2 V/µs GBW Gain bandwidth product RL = 10 kΩ, CL = 100 pF, f = 100 kHz 25°C 1.4 2.1 MHz Φm Phase margin RL = 10 kΩ, CL = 100 pF 25°C 45 ° THD Total harmonic distortion 25°C 0.01 % Vn Equivalent input noise voltage 25°C 19 25°C Source Sink f = 1 kHz Submit Documentation Feedback 70 90 3 6 3 6 25°C 27 28 Full range 26 25°C 25°C 130 Full range V dB mA V 170 200 mV nV/√Hz 3 TSM102,, TSM102A DUAL OPERATIONAL AMPLIFIER, DUAL COMPARATOR, AND VOLTAGE REFERENCE www.ti.com SLVS602 – MARCH 2006 Comparator Electrical Characteristics VCC+ = 5 V, VCC– = GND (unless otherwise noted) PARAMETER VIO Input offset voltage VID Comparator differential input voltage IIO Input offset current IIB Input bias current IOH High-level output current TEST CONDITIONS TA MIN TYP 5 Full range 9 Full range VID = 1 V, VCC = VO = 30 V MAX 25°C VCC+ 25°C 50 Full range 150 25°C 250 Full range 400 25°C 0.1 Full range 250 mV V nA nA nA 1 25°C UNIT 400 µA VOL Low-level output voltage VID = –1 V, Isink = 4 mA AVD Large-signal voltage gain VCC+ = 15 V, R1 = 15 kΩ, VO = 1 V to 11 V 25°C Isink Output sink current VO = 1.5 V, VID = –1 V 25°C 6 VICM Input common-mode voltage range 25°C 0 VCC+ – 1.5 Full range 0 VCC+ – 2 tRESP Response time (1) R1 = 5.1 kΩ to VCC+, VREF = 1.4 V 25°C 1.3 µs Large-signal response time R1 = 5.1 kΩ to VCC+, VREF = 1.4 V, VI = TTL 25°C 300 ns tRESP,large (1) 4 Full range 700 mV 200 V/mV 16 mA V The response-time specification is for 100-mV input step with 5-mV overdrive. For larger overdrive signals, 300 ns can be obtained. Submit Documentation Feedback TSM102,, TSM102A DUAL OPERATIONAL AMPLIFIER, DUAL COMPARATOR, AND VOLTAGE REFERENCE www.ti.com SLVS602 – MARCH 2006 Voltage-Reference Electrical Characteristics PARAMETER TEST CONDITIONS TSM102 TA VKA = VREF, IK = 10 mA, See Figure 1 MIN TYP MAX 25°C 2.475 2.5 2.525 25°C 2.49 2.5 2.51 VREF Reference voltage (1) ∆VREF Reference input voltage deviation over temperature range (1) VKA = VREF, IK = 10 mA, See Figure 1 Full range 7 30 DVREF DT Average temperature coefficient of reference input voltage (2) VKA = VREF, IK = 10 mA Full range ±22 ±100 DVREF DVKA Ratio of change in reference voltage to change in cathode voltage VKA = 3 V to 36 V, IK = 10 mA, See Figure 2 25°C –1.1 –2 IREF Reference input current IK = 10 mA, R1 = 10 kΩ, R2 = ∞, See Figure 2 25°C 1.5 2.5 ∆IREF Reference input current deviation over temperature range IK = 10 mA, R1 = 10 kΩ, R2 = ∞, See Figure 2 Imin Minimum cathode current for regulation IK,OFF Off-state cathode current (1) (2) TSM102A Full range UNIT V mV ppm/°C 3 mV/V µA Full range 0.5 1 µA VKA = VREF, See Figure 1 25°C 0.5 1 mA See Figure 3 25°C 180 500 nA ∆VREF is defined as the difference between the maximum and minimum values obtained over the full temperature range. ∆VREF = VREF(MAX) – VREF(MIN) The temperature coefficient is defined as the slopes (positive and negative) of the voltage vs temperature limits within which the reference voltage is specified. –n VREF(MAX) pp m/ C ° pm/ +n p °C MAX 2.5 V MIN VREF(MIN) T1 T2 Temperature Temperature 25°C Submit Documentation Feedback 5 TSM102,, TSM102A DUAL OPERATIONAL AMPLIFIER, DUAL COMPARATOR, AND VOLTAGE REFERENCE www.ti.com SLVS602 – MARCH 2006 PARAMETER MEASUREMENT INFORMATION Input VKA IK VREF Figure 1. Test Circuit for VKA = VREF VKA Input VKA = VREF (1 + (R1/R2)) + (IREF × R1) IK R1 IREF R2 VREF Figure 2. Test Circuit for VKA > VREF VKA Input IOFF Figure 3. Test Circuit for IOFF 6 Submit Documentation Feedback TSM102,, TSM102A DUAL OPERATIONAL AMPLIFIER, DUAL COMPARATOR, AND VOLTAGE REFERENCE www.ti.com SLVS602 – MARCH 2006 TYPICAL CHARACTERISTICS AMPLIFIER TOTAL HARMONIC DISTORTION vs FREQUENCY AMPLIFIER NOISE VOLTAGE vs FREQUENCY 400 350 0.1 nV/ÖHz Voltage Noise – nV/rtHz THD – Total Harmonic Distortion – % 1 0.01 0.001 300 250 200 150 100 50 0.0001 100 100 0 10k 10000 1k 1000 100k 100000 10 100 f – Frequency – Hz Figure 4. Figure 5. GAIN AND PHASE vs FREQUENCY VREF STABILITY vs CAPACITANCE 180 50 140 40 Phase 30 100 60 10 -20 0 -60 -10 -100 -20 -140 25 Current – mA 20 Gain 100000 100k 35 Phase – deg Gain – dB 30 10000 10k f – Frequency – Hz 60 20 1000 1k 20 15 10 -30 1k 1.E+03 10k 1.E+04 100k 1.E+05 1M 1.E+06 f – Frequency – Hz -180 10M 1.E+07 5 0 1 10 100 1000 10000 Capacitance – pF Figure 6. Figure 7. Submit Documentation Feedback 7 TSM102,, TSM102A DUAL OPERATIONAL AMPLIFIER, DUAL COMPARATOR, AND VOLTAGE REFERENCE www.ti.com SLVS602 – MARCH 2006 TYPICAL CHARACTERISTICS (continued) VREF vs TEMPERATURE 2.515 IO = 100 mA 2.510 2.505 VREF – V 2.500 IO = 10 mA 2.495 2.490 IO = 1 mA 2.485 2.480 –40 –25 –10 5 20 35 50 65 80 Temperature – °C Figure 8. 8 Submit Documentation Feedback 95 110 125 PACKAGE OPTION ADDENDUM www.ti.com 10-Dec-2020 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan (2) Lead finish/ Ball material MSL Peak Temp Op Temp (°C) Device Marking (3) (4/5) (6) TSM102AIDR ACTIVE SOIC D 16 2500 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 TSM102AI TSM102AIPW ACTIVE TSSOP PW 16 90 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 SN102AI TSM102AIPWR ACTIVE TSSOP PW 16 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 SN102AI TSM102ID ACTIVE SOIC D 16 40 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 TSM102I TSM102IDR ACTIVE SOIC D 16 2500 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 TSM102I TSM102IPWR ACTIVE TSSOP PW 16 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 SN102I (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of