uA9637AC
DUAL DIFFERENTIAL LINE RECEIVER
SLLS111B – SEPTEMBER 1980 – REVISED MAY 1995
D
D
D
D
D
D
D
D
uA9637AC . . . D OR P PACKAGE
(TOP VIEW)
Meets or Exceeds the Requirements of
ANSI Standards EIA/TIA-422-B and
EIA/TIA-423-B and ITU Recommendations
V.10 and V.11
Operates From Single 5-V Power Supply
Wide Common-Mode Voltage Range
High Input Impedance
TTL-Compatible Outputs
High-Speed Schottky Circuitry
8-Pin Dual-in-Line and Small-Outline
Packages
Designed to Be Interchangeable With
National DS9637A
VCC
1OUT
2OUT
GND
1
8
2
7
3
6
4
5
1IN+
1IN –
2IN+
2IN –
description
The uA9637AC is a dual differential line receiver designed to meet ANSI Standards EIA/TIA-422-B and
EIA/TIA-423-B and ITU Recommendations V.10 and V.11. The line receiver utilizes Schottky circuitry and has
TTL-compatible outputs. The inputs are compatible with either a single-ended or a differential-line system. This
device operates from a single 5-V power supply and is supplied in an 8-pin dual-in-line package or small-outline
package.
The uA9637AC is characterized for operation from 0°C to 70°C.
logic symbol†
1IN +
1IN –
2IN +
2IN –
8
7
6
5
logic diagram
1IN +
2
1OUT
1IN –
2IN +
3
2OUT
2IN –
8
7
6
5
2
3
1OUT
2OUT
† This symbol is in accordance with ANSI/IEEE Std 91-1984 and
IEC Publication 617-12.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Copyright 1995, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
1
uA9637AC
DUAL DIFFERENTIAL LINE RECEIVER
SLLS111B – SEPTEMBER 1980 – REVISED MAY 1995
schematics of inputs and outputs
TYPICAL OF ALL OUTPUTS
EQUIVALENT OF EACH INPUT
VCC
VCC
50 Ω NOM
8 kΩ
Input
Output
Current
Source
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)†
Supply voltage range, VCC (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.5 V to 7 V
Input voltage, VI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 15 V
Differential input voltage, VID (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 15 V
Output voltage range, VO (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.5 V to 5.5 V
Low-level output current, IOL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 mA
Continuous total dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Dissipation Rating Table
Operating free-air temperature range, TA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C
Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 65°C to 150°C
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C
† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. All voltage values, except differential input voltage, are with respect to the network ground terminal.
2. Differential input voltage is measured at the noninverting input with respect to the corresponding inverting input.
DISSIPATION RATING TABLE
TA ≤ 25°C
POWER RATING
OPERATING FACTOR
ABOVE TA = 25°C
TA = 70°C
POWER RATING
TA = 125°C
POWER RATING
D
725 mW
5.8 mW/°C
464 mW
—
P
1000 mW
8.0 mW/°C
640 mW
—
PACKAGE
2
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
uA9637AC
DUAL DIFFERENTIAL LINE RECEIVER
SLLS111B – SEPTEMBER 1980 – REVISED MAY 1995
recommended operating conditions
Supply voltage, VCC
MIN
NOM
MAX
UNIT
4.75
5
5.25
V
Common-mode input voltage, VIC
Operating free-air temperature, TA
0
±7
V
70
°C
electrical characteristics over recommended ranges of supply voltage, common-mode input
voltage, and operating free-air temperature (unless otherwise noted)
PARAMETER
TEST CONDITIONS
VIT +
Positive going input threshold voltage
Positive-going
See Note 3
VIT –
Negative going input threshold voltage
Negative-going
See Note 3
Vhys
VOH
Hysteresis voltage (VIT+ – VIT– )
VOL
Low-level output voltage
MIN
TYP†
MAX
0.2
0.4
UNIT
V
– 0.2
High-level output voltage
V
–0.4‡
VID = 0.2 V,
VID = – 0.2 V,
IO = – 1 mA
IO = 20 mA
II
Input current
VCC = 0 to 5.5 V,,
See Note 4
VI = 10 V
VI = – 10 V
IOS
Short-circuit output current§
VO = 0,
VID = 0.2 V
2.5
– 40
70
mV
3.5
V
0.35
0.5
1.1
3.25
– 1.6
– 3.25
– 75
– 100
V
mA
mA
ICC
Supply current
VID = – 0.5 V,
No load
35
50
mA
† All typical values are at VCC = 5 V, TA = 25°C.
‡ The algebraic convention, in which the less positive (more negative) limit is designated as minimum, is used in this data sheet for threshold levels
only.
§ Only one output should be shorted at a time, and duration of the short circuit should not exceed one second.
NOTES: 3. The expanded threshold parameter is tested with a 500-Ω resistor in series with each input.
4. The input not under test is grounded.
switching characteristics, VCC = 5 V, TA = 25°C
PARAMETER
tPLH
tPHL
TEST CONDITIONS
Propagation delay time, low- to high-level output
Propagation delay time, high- to low-level output
CL = 30 pF,
pF
POST OFFICE BOX 655303
See Figure 1
• DALLAS, TEXAS 75265
MIN
TYP
MAX
15
25
UNIT
ns
13
25
ns
3
uA9637AC
DUAL DIFFERENTIAL LINE RECEIVER
SLLS111B – SEPTEMBER 1980 – REVISED MAY 1995
PARAMETER MEASUREMENT INFORMATION
VCC +
VCC +
Output
392 Ω
Input
0.5 V
Input
(see Note B)
– 0.5 V
50%
51 Ω
50%
tPLH
CL = 30 pF
(see Note A)
Output
3.92 kΩ
1.5 V
1.5 V
TEST CIRCUIT
tPHL
VOLTAGE WAVEFORM
NOTES: A. CL includes probe and jig capacitance.
B. The input pulse is supplied by a generator having the following characteristics: tr ≤ 5 ns, tf ≤ 5 ns, PRR ≤ 5 MHz, duty cycle = 50%.
Figure 1. Test Circuit and Voltage Waveform
TYPICAL CHARACTERISTICS
OUTPUT VOLTAGE
vs
DIFFERENTIAL INPUT VOLTAGE
OUTPUT VOLTAGE
vs
DIFFERENTIAL INPUT VOLTAGE
4
ÁÁ
ÁÁ
3.5
3
VO – Output Voltage – V
VO
VO – Output Voltage – V
VO
3.5
4
VCC = 4.75 V
TA = 25°C
VIC = 0
2.5
VIC = ± 7 V
2
3
VIC = 0
2.5
VIC = ± 7 V
2
ÁÁ
ÁÁ
1.5
VIC = ± 7 V
1
VIC = 0
0.5
VCC = 5.25 V
TA = 25°C
1.5
VIC = ± 7 V
1
VIC = 0
0.5
0
– 100 – 75
– 50 – 25
0
25
50
75
100
0
– 100 – 75
VID – Differential Input Voltage – mV
Figure 2
4
25
75
– 50 – 25
0
50
VID – Differential Input Voltage – mV
Figure 3
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
100
uA9637AC
DUAL DIFFERENTIAL LINE RECEIVER
SLLS111B – SEPTEMBER 1980 – REVISED MAY 1995
TYPICAL CHARACTERISTICS
HIGH-LEVEL OUTPUT VOLTAGE
vs
HIGH-LEVEL OUTPUT CURRENT
LOW-LEVEL OUTPUT VOLTAGE
vs
LOW-LEVEL OUTPUT CURRENT
5
4
VOL – Low-Level Output Voltage – V
4.5
3.5
3
2.5
2
1.5
1
VCC = 5 V
VID = – 0.2 V
TA = 25°C
0.5
0.4
0.3
0.2
0.1
0.5
0
0
0
– 10
– 20
– 30
– 40
– 50
– 60
– 70 – 80
0
5
IOH – High-Level Output Current – mA
10
15
20
25
30
35
40
IOL – Low-Level Output Current – mA
Figure 4
Figure 5
SUPPLY CURRENT
vs
SUPPLY VOLTAGE
100
No Load
Inputs Open
TA = 25°C
90
80
I CC – Supply Current – mA
VOH – High-Level Ouput Voltage – V
0.6
VCC = 5 V
VID = 0.2 V
TA = 25°C
70
60
50
40
30
20
10
0
0
1
2
3
4
5
6
7
8
VCC – Supply Voltage – V
Figure 6
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5
uA9637AC
DUAL DIFFERENTIAL LINE RECEIVER
SLLS111B – SEPTEMBER 1980 – REVISED MAY 1995
APPLICATION INFORMATION
5V
Twisted Pair
5V
1/2 uA9638AC
1/2 uA9637AC
5V
1/2 uA9637AC
Figure 7. EIA/TIA-422-B System Applications
6
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
PACKAGE OPTION ADDENDUM
www.ti.com
14-Oct-2022
PACKAGING INFORMATION
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
(2)
Lead finish/
Ball material
MSL Peak Temp
Op Temp (°C)
Device Marking
(3)
Samples
(4/5)
(6)
UA9637ACD
ACTIVE
SOIC
D
8
75
RoHS & Green
NIPDAU
Level-2-260C-1 YEAR
0 to 70
9637AC
Samples
UA9637ACDR
ACTIVE
SOIC
D
8
2500
RoHS & Green
NIPDAU
Level-2-260C-1 YEAR
0 to 70
9637AC
Samples
UA9637ACDRE4
ACTIVE
SOIC
D
8
2500
RoHS & Green
NIPDAU
Level-2-260C-1 YEAR
0 to 70
9637AC
Samples
UA9637ACDRG4
ACTIVE
SOIC
D
8
2500
RoHS & Green
NIPDAU
Level-2-260C-1 YEAR
0 to 70
9637AC
Samples
UA9637ACP
ACTIVE
PDIP
P
8
50
RoHS & Green
NIPDAU
N / A for Pkg Type
0 to 70
UA9637ACP
Samples
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance
do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may
reference these types of products as "Pb-Free".
RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption.
Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of