BVM-SFPC3W2SLN

Bright View Electronics FLEXSTRIP LIGHT ■ DESCRIPTION - Flexstrip light is made of high brightness SMD LEDs mounted on flexible printed circuit (FPC). - Bright View also provides controller for dimmer and programmable color change. BVM-SFPC3 LN SERIES ■ FEATURES Number of SMD LEDs : 288 pcs of ultra bright SMD LEDs Product size (LxWXH) : 4032mm x 10mm x 2.6mm Easy installation with the back adhesive-tape Products are packed into reel and can be cut at mark place into shorter units Shortest unit is 84mm with 6 LEDs; 48 shortest units per reel. Drive: 12VDC Low power consumption and high optical intensity Lead (Pb) free, and RoHS compliant ■ APPLICATIONS Amusement park & theater mood lighting Architectural decorative lighting Backlighting for signage letters Auditorium walkway lighting Stairway accent lighting Hallway lighting Date：2008/12/02 Page ：1 of 7 Revision A Bright View Electronics FLEXSTRIP LIGHT ■ PRODUCT DIMENSION BVM-SFPC3 LN SERIES Unit : mm Tolerance : ±0.5mm 84 7 + www.bvled.com.tw 12V DC 84 14 14 + www.bvled.com.tw 12V DC 4 1.9 - P/N BVM-SFPC3 Series 12V DC PAD 1.9 Resistor 0.7 3M Tape ■ PART NUMBERING SYSTEM B V M - S F P C 3 W 2 S LN LN Series LED Color Code Product Code LED Module 2.6 10 + Date：2008/12/02 Page ：2 of 7 Revision A Bright View Electronics FLEXSTRIP LIGHT ■ ABSOLUTE MAXIMUM RATINGS AT Ta = 25 ℃ PARAMETER Operating Voltage (max.) Electrostatic Discharge (Contact Mode) Power Dissipation / Unit Total Power Dissipation / 48 Units / Reel Operating Temperature Range Storage Temperature Range BVM-SFPC3 G2SLN W2SLN 13V 13V ±2000V 0.65W 31.2W －30 ℃ to ＋50 ℃ －30 ℃ to ＋85 ℃ BVM-SFPC3 LN SERIES B2SLN 13V ■ TYPICAL ELECTRICAL / OPTICAL CHARACTERISTICS AT 12VDC Ta = 25 ℃ PARAMETER B2SLN G2SLN W2SLN Unit Color Blue Green White * λp Peak Emission Wavelength 465 520 * nm Dominant Wavelength λd 470 525 * nm LED Viewing Angle 2θ1/2 110 110 110 deg Operating Current / Unit IU 40 40 40 mA IR Operating Current / Reel 1.92 1.92 1.92 A Luminous Flux / Unit ΦU 3.0 8.4 19.8 lm Luminous Flux / Reel ΦR 144 403 950 lm * White products are provided with different color temperature bins. (see following paragraph) SYMBOL Note: 1. Luminous flux measurement tolerance : +/- 10% 2. View angle of the LED is the off-axis angle from the optical center line to the 1/2 luminous intensity of the peak value. Date：2008/12/02 Page ：3 of 7 Revision A Bright View Electronics FLEXSTRIP LIGHT ■ BIN GRADE LIMITS CHROMATICITY COORDINATES BVM-SFPC3 LN SERIES Bin Code c1 Color Temperature Rank (Kelvin) 6300~7000 x y x y x y x y x y x y x y x y x y x y x y x y x y x y x y x y Chromaticity Coordinates 0.307 0.315 0.311 0.294 0.3165 0.325 0.3188 0.3038 0.33 0.339 0.33 0.318 0.3453 0.3514 0.3436 0.3307 0.3897 0.3823 0.3822 0.358 0.4053 0.3907 0.3954 0.3642 0.4255 0.4 0.4129 0.3725 0.4519 0.4086 0.4355 0.3785 0.304 0.33 0.307 0.315 0.3147 0.3423 0.3165 0.325 0.33 0.36 0.33 0.339 0.3473 0.3739 0.3453 0.3514 0.3988 0.4116 0.3897 0.3823 0.4162 0.42 0.4053 0.3907 0.439 0.431 0.4255 0.4 0.468 0.4385 0.4519 0.4086 0.3147 0.3423 0.3165 0.325 0.33 0.36 0.33 0.339 0.3473 0.3739 0.3453 0.3514 0.361 0.385 0.3575 0.3612 0.4162 0.42 0.4053 0.3907 0.439 0.431 0.4255 0.4 0.468 0.4385 0.4519 0.4086 0.497 0.4466 0.477 0.4137 0.3165 0.325 0.3188 0.3038 0.33 0.339 0.33 0.318 0.3453 0.3514 0.3436 0.3307 0.3575 0.3612 0.3545 0.3408 0.4053 0.3907 0.3954 0.3642 0.4255 0.4 0.4129 0.3725 0.4519 0.4086 0.4355 0.3785 0.477 0.4137 0.4588 0.3838 c2 c3 5500~6300 c4 d1 5000~5500 d2 d3 4500~5000 d4 f1 3800-3500 f2 f3 3200~3500 f4 g1 2800~3200 g2 h1 2500~2800 h2 Date：2008/12/02 Page ：4 of 7 Revision A Bright View Electronics FLEXSTRIP LIGHT ■ CHROMATICITY DIAGRAM CIE 1931 BVM-SFPC3 LN SERIES 0.9 0.8 CIE y 520 530 510 540 550 0.7 0.6 500 560 570 0.5 0.4 0.3 0.2 480 490 f3 g2 g1 h2 h1 580 590 600 610 630 770 f1 e3 f4 e1 f2 d3 e4 d1 e2 c3 d4 c1 d2 c4 c2 0.1 470 0.0 0.0 0.1 380 CIE x 0.2 0.3 0.4 0.5 0.6 0.7 0.8 *The chromaticity coordinates (x,y) of the SMD LEDs are in accordance with CIE 1931 chromaticity diagram. *The color temperature values used are based on the traditional incandescence lighting standard which cannot be exact applicable to LED lighting. It must be used only for reference purpose. *Measurement uncertainty of color coordinates: ±0.02 Note: Products of different CIE bins may not use the same materials and thus may have minor differences in characteristic and business terms Date：2008/12/02 Page ：5 of 7 Revision A Bright View Electronics FLEXSTRIP LIGHT ■ PACKING BVM-SFPC3 LN SERIES PAR QA Brig Anti-electrostatic bag LO NO.: T NO.: T DE: GRA y Q 't ICES DEV T p cs IVE XCEP T E LE ATION SENSI ND ST HA IC STAT OR E WORK O PEN O C-FRE ECTR T NO EL D O A STATI AT ht View E l ectron ics Co.,L td. B right View PA RT NO.: LO T N O.: G RADE: Q'ty E le ctronics C o.,Ltd. QA Pb-Free / RoHS C om pliant E LEC T R O ST AT IC SEN SIT IVE DEVIC ES DO N O T O PEN O R H AN D LE EX CEPT AT A S TA TIC -F R EE W O R KSTAT IO N 24 C arton : 20 Reels 39 RE Y 26 ITE M NO . DE V ICE : Q 'TY N. W .: G . W .: PC S. KG S . KGS. C AR TO N D im ension(cm ): 39 x 24 x 26 Date：2008/12/02 Page ：6 of 7 Revision A Bright View Electronics FLEXSTRIP LIGHT ■ CAUTIONS 1. Over voltage A. Drive the product over the specified voltage rating (13VDC) per unit or per reel will damage the product. B. The product should not be used in reverse polarity. C. It is recommended to use a power supply with overload (over-voltage, short circuit and overheat) protection. 2. Hand soldering A. It is recommended to use a tip temperature of 280 OC for less than 3 seconds (one times) with a soldering iron capacity of 30W, if hand soldering of the connecting wire is required. B. Be careful of the contaminations of hand soldering. 3. Storage & Handling A. Open the anti-electrostatic bag only a short time before use. B. LED is encapsulated with elastic resin and will be damaged with a external force applied on the top surface of the LED. C. The product should be storage in an environment with the relative humidity less than 90% RH (@30 degree C or less). D. During installation, excess mechanical stress will damage the product. The minimum bending radius of curvature is 5000mm. The maximum twist angle is 1 degree. E. The product is not waterproof. Excess moisture may also damage the product. BVM-SFPC3 LN SERIES Date：2008/12/02 Page ：7 of 7 Revision A