BVM-TG50NAD1

Bright View Electronics LED TUBE ■ DESCRIPTION - Solution for energy saving,CO2 reduction and environment protection - BV LED tube is made of high brightness LED with driver build in - Long lifetime(about to 50000Hrs) - Recyclable - Easy installation,direct replacement 1500mm / T9 / G13 LED TUBE ■ FEATURES End cap meets standard G13 specification Meets T9 (9/8 inches diameter) tube size Full range voltage (AC 90- 264V) Low power consumption and high optical intensity High power efficiency.(>0.8) Lead (Pb) free, and RoHS compliant ■ APPLICATIONS General Lighting Tube Light Source Architectural Lighting Backlighting ■ PART NUMBER LIST P/N BVM-TG50NAD1 BVM-TG50NAC1 Power(110Vac) 26 26 CCT 5600K 5600K Lens Diffused Clear Cap base G13 G13 LED quantity 150 150 Flux 1600 2100 ■ DIMENSIONS Unit：mm Date：2009/08/14 Page：1 of 3 Version-A Bright View Electronics LED TUBE 1500mm / T9 / G13 LED TUBE ■ TYPICAL ELECTRICAL / OPTICAL CHARACTERISTICS AT Ta = 25 ℃ BVM-TG50NAD1 PARAMETER Power dissipation Power Factor Power Efficiency Luminous flux Illuminance (@100cm) Luminous Efficacy Color Temperature Input Voltage, Frequency Operating Temperature Range Storage Temperature Range Weight SYMBOL Pd PF PE ΦU E η CCT Vi Top Ts - 110VAC / 60Hz 220V / 60Hz 26(Typ.) 28(Typ.) ≧0.7 ≧0.7 0.8(Typ.) 0.8(Typ.) 1600(Typ.) 1650(Typ.) 330(Typ.) 360(Typ.) 61(Typ.) 58(Typ.) 5600+/- 500 90~264; 50/60Hz -30 ~ +50 -30 ~ +65 563(Typ.) UNIT W lm lx lm/W °K Vac ℃ ℃ g BVM-TG50NAC1 PARAMETER Power dissipation Power Factor Power Efficiency Luminous flux Illuminance (@100cm) Luminous Efficacy Color Temperature Input Voltage, Frequency Operating Temperature Range Storage Temperature Range Weight SYMBOL Pd PF PE ΦU E η CCT Vi Top Ts - 110VAC / 60Hz 26(Typ.) ≧0.7 0.8(Typ.) 2100(Typ.) 390(Typ.) 80(Typ.) 220V / 60Hz 28(Typ.) ≧0.7 0.8(Typ.) 2200(Typ.) 430(Typ.) 78(Typ.) UNIT W lm lx lm/W °K Vac ℃ ℃ g 5600+/- 500 90~264; 50/60Hz -30 ~ +50 -30 ~ +65 563(Typ.) Date：2009/08/14 Page：2 of 3 Version-A Bright View Electronics LED TUBE ■ Packaging Each carton has 20 tubes. 1500mm / T9 / G13 LED TUBE ■ CAUTIONS 1. Voltage A. Driver the product over the specified voltage rating (264VAC) will damage the product. B. Lower than 90VAC the product will not work normally. C. Use DC source the product may not work normally. 2. Installation A. For your safety please turn off the power before install the product. B. Remove the starter from the luminaires. Starter may cause the tube work abnormally. C. Remover the capacitor from the ballast. D. This tube is not designed for rapid and instant type ballast. Do not apply the lamp in these luminaires. 3. Storage & Handling A. The product should be storage in an environment with the relative humidity less than 90% RH (@30 degree C or less). B. Warranty will be VOID if disassemble the lamp. C. The priduct is not waterproof. Excess moisture may also damage the product. Date：2009/08/14 Page：3 of 3 Version-A