R1200F
THRU
R2500F
HIGH VOLTAGE FAST RECOVERY RECTIFIERS
VOLTAGE RANGE
1200 to 2500 Volts
CURRENT FEATURES
* Low forward voltage drop * High current capability * High reliability * High surge current capability 500 & 200 m Ampere DO-41
.107(2.7) .080(2.0) DIA.
1.0(25.4) MIN.
MECHANICAL DATA
* Case: Molded plastic * Epoxy: UL 94V-0 rate flame retardant * Lead: Axial leads, solderable per MIL-STD-202, method 208 guranteed * Polarity: Color band denotes cathode end * Mounting position: Any * Weight: 0.34 grams
.205(5.2) .166(4.2)
.034(.9) .028(.7) DIA.
1.0(25.4) MIN.
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating 25 C ambient temperature uniess otherwies specified. Single phase half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%.
TYPE NUMBER
Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current .375"(9.5mm) Lead Length at Ta=50 C Peak Forward Surge Current, 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Maximum Instantaneous Forward Voltage at 0.5A/0.2A D.C. Maximum DC Reverse Current Ta=25 C at Rated DC Blocking Voltage Ta=100 C Maximum Reverse Recovery Time (Note 1) Typical Junction Capacitance (Note 2) Operating and Storage Temperature Range TJ, TSTG
NOTES:
R1200F 1200 840 1200
R1500F R1600F 1500 1050 1500 500 1600 1120 1600
R1800F 1800 1260 1800
R2000F R2500F UNITS 2000 1400 2000 200 2500 1750 2500 V V V mA A V µA µA nS pF C
30 2.0 5.0 100 500 40 -65 +175 3.0
1. Reverse Recovery Time test condition: IF=0.5A, IR=1.0A, IRR=0.25A 2. Measured at 1MHz and applied reverse voltage of 4.0V D.C.
258
RATING AND CHARACTERISTIC CURVES (R1200F THRU R2500F)
FIG.1 - TYPICAL REVERSE
AVERAGE FORWARD CURRENT,(mA)
FIG.2-TYPICAL FORWARD CURRENT DERATING CURVE
600
Single Phase
CHARACTERISTICS 100
500 400 300 200 100 0 0
R 20 0
Half Wave 60Hz Resistive Or Inductive Load 0.375"(9.5mm) Lead Length
REVERSE LEAKAGE CURRENT, (µA)
10
Tj=100 C
R1
20
0F ~R
18
0F~R
00
F
2500
F
1.0
20
40
60
80
100
120
140
160
180
200
AMBIENT TEMPERATURE ( C)
.1
Tj=25 C
FIG.4-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT
PEAK FORWARD SURGE CURRENT,(A)
30
.01 0
20
40
60
80
100 120 140
24
PERCENTAGE RATED PEAK REVERSE VOLTAGE
18
Tj=25 C 8.3ms Single Half Sine Wave JEDEC method
FIG.3- TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTICS
50Ω NONINDUCTIVE 10Ω NONINDUCTIVE
12
6
0 1 5 10 50 100
(+) 25Vdc (approx.) () 1Ω NONINDUCTIVE OSCILLISCOPE (NOTE 1) D.U.T.
() PULSE GENERATOR (NOTE 2) (+)
NUMBER OF CYCLES AT 60Hz
NOTES: 1. Rise Time= 7ns max., Input Impedance= 1 megohm.22pF. 2. Rise Time= 10ns max., Source Impedance= 50 ohms.
FIG.5-TYPICAL JUNCTION CAPACITANCE
140 120 100 80 60 40 20 0
trr +0.5A
| | | | | | | |
0 -0.25A
-1.0A 1cm SET TIME BASE FOR 50 / 10ns / cm
JUNCTION CAPACITANCE,(pF)
.01
.05
.1
.5
1
5
10
50
100
REVERSE VOLTAGE,(V)
259
