CLC2011ISO8X

Advance Data Sheet A m p l i fy t h e H u m a n E x p e r i e n c e Comlinear CLC1011, CLC2011, CLC4011 ® Low Power, Low Cost, Rail-to-Rail I/O Amplifiers Comlinear CLC1011, CLC2011, CLC4011 Low Power, Low Cost, Rail-to-Rail I/O Amplifiers FEATURES n 136μA supply current n 4.9MHz bandwidth n Output swings to within 20mV of either rail n Input voltage range exceeds the rail by >250mV n 5.3V/μs slew rate n 21nV/√Hz input voltage noise n 16mA output current n Fully specified at 2.7V and 5V supplies n CLC1011: Pb-free SOT23-5, SC70-5, SOIC-8 n CLC2011: Pb-free SOIC-8, MSOP-8 n CLC4011: Pb-free SOIC-14. TSSOP-14 APPLICATIONS n Portable/battery-powered applications n PCMCIA, USB n Mobile communications, cell phones, pagers n ADC buffer n Active filters n Portable test instruments n Notebooks and PDA’s n Signal conditioning n Medical Equipment n Portable medical instrumentation General Description The COMLINEAR CLC1011 (single), CLC2011 (dual), and CLC4011 (quad) are ultra-low cost, low power, voltage feedback amplifiers. At 5V, the CLCx011 family uses only 160μA of supply current per amplifier and are designed to operate from a supply range of 2.5V to 5.5V (±1.25 to ±2.75). The input voltage range exceeds the negative and positive rails. The CLCx011 family of amplifiers offer high bipolar performance at a low CMOS prices. They offer superior dynamic performance with 4.9MHz small signal bandwidths and 5.3V/μs slew rates. The combination of low power, high bandwidth, and rail-to-rail performance make the CLCx011 amplifiers well suited for battery-powered communication/computing systems Typical Performance Examples Large Signal Frequency Response V s = 5V V o = 1Vpp Output Swing vs. Load 1.35 R L = 10kΩ R L = 1kΩ Output Voltage (0.27V/div) Magnitude (1dB/div) 0 R L = 75Ω R L = 100Ω R L = 200Ω R L = 75/100Ω V o = 4Vpp V o = 2Vpp -1.35 0.01 0.1 1 10 -2.0 0 2.0 Frequency (MHz) Input Voltage (0.4V/div) Ordering Information Part Number CLC1011ISC5X* CLC1011IST5X* CLC2011ISO8X* CLC2011IMP8X* CLC4011ISO14X* CLC4011ITP14X* Package SC70-5 SOT23-5 SOIC-8 MSOP-8 SOIC-14 TSSOP-14 Pb-Free Yes Yes Yes Yes Yes Yes RoHS Compliant Yes Yes Yes Yes Yes Yes Operating Temperature Range -40°C to +85°C -40°C to +85°C -40°C to +85°C -40°C to +85°C -40°C to +85°C -40°C to +85°C Packaging Method Reel Reel Reel Reel Reel Reel Rev 0.0.1 Moisture sensitivity level for all parts is MSL-1. *Advance Information. ©2009 CADEKA Microcircuits LLC www.cadeka.com Advance Data Sheet CLC1011 Pin Configuration CLC1011 Pin Assignments Pin No. 1 2 3 4 5 Pin Name OUT -VS +IN -IN +VS Description Output Negative supply Positive input Negative input Positive supply OUT -V S +IN 1 2 3 + 5 +VS 4 Comlinear CLC1011, CLC2011, CLC4011 Low Power, Low Cost, Rail-to-Rail I/O Amplifiers -IN CLC2011 Pin Configuration CLC2011 Pin Configuration Pin No. 1 Pin Name OUT1 -IN1 +IN1 -VS +IN2 -IN2 OUT2 +VS Description Output, channel 1 Negative input, channel 1 Positive input, channel 1 Negative supply Positive input, channel 2 Negative input, channel 2 Output, channel 2 Positive supply OUT1 -IN1 +IN1 -V S 1 2 3 4 8 7 6 5 +VS OUT2 -IN2 +IN2 2 3 4 5 6 7 8 CLC4011 Pin Configuration CLC4011 Pin Configuration Pin No. 1 2 Pin Name OUT1 -IN1 +IN1 +VS +IN2 -IN2 OUT2 OUT3 -IN3 +IN3 -VS +IN4 -IN4 OUT4 Description Output, channel 1 Negative input, channel 1 Positive input, channel 1 Positive supply Positive input, channel 2 Negative input, channel 2 Output, channel 2 Output, channel 3 Negative input, channel 3 Positive input, channel 3 Negative supply Positive input, channel 4 Negative input, channel 4 Output, channel 4 OUT1 -IN1 +IN1 +VS +IN2 -IN2 OUT2 1 2 3 4 5 6 7 14 13 12 11 10 9 8 OUT4 -IN4 +IN4 -VS +IN3 -IN3 OUT3 3 4 5 6 7 8 9 10 11 12 13 14 Rev 0.0.1 ©2009 CADEKA Microcircuits LLC www.cadeka.com 2 Advance Data Sheet Absolute Maximum Ratings The safety of the device is not guaranteed when it is operated above the “Absolute Maximum Ratings”. The device should not be operated at these “absolute” limits. Adhere to the “Recommended Operating Conditions” for proper device function. The information contained in the Electrical Characteristics tables and Typical Performance plots reflect the operating conditions noted on the tables and plots. Comlinear CLC1011, CLC2011, CLC4011 Low Power, Low Cost, Rail-to-Rail I/O Amplifiers Parameter Supply Voltage Input Voltage Range Continuous Output Current Min 0 -Vs -0.5V -30 Max 6 +Vs +0.5V 30 Unit V V mA Reliability Information Parameter Junction Temperature Storage Temperature Range Lead Temperature (Soldering, 10s) Package Thermal Resistance 5-Lead SC70 5-Lead SOT23 8-Lead SOIC 8-Lead MSOP 14-Lead SOIC 14-Lead TSSOP Notes: Package thermal resistance (qJA), JDEC standard, multi-layer test boards, still air. Min -65 Typ Max 175 150 260 Unit °C °C °C °C/W °C/W °C/W °C/W °C/W °C/W TBD TBD TBD TBD TBD TBD ESD Protection Product Human Body Model (HBM) Charged Device Model (CDM) SC70-5 TBD TBD SOT23-5 TBD TBD SOIC-8 TBD TBD MSOP-8 TBD TBD SOIC-14 TBD TBD TSSOP-14 TBD TBD Recommended Operating Conditions Parameter Operating Temperature Range Supply Voltage Range Min -40 2.5 Typ Max +85 5.5 Unit °C V Rev 0.0.1 ©2009 CADEKA Microcircuits LLC www.cadeka.com 3 Advance Data Sheet Electrical Characteristics at +2.7V TA = 25°C, Vs = +2.7V, Rf = Rg =5kΩ, RL = 10kΩ to VS/2, G = 2; unless otherwise noted. Symbol UGBWSS BWSS BWLS GBWP tR, tF OS SR HD2 HD3 THD en VIO dVIO Ib dIb PSRR AOL IS RIN CIN CMIR CMRR Parameter Unity Gain -3dB Bandwidth -3dB Bandwidth Large Signal Bandwidth Gain Bandwdith Product Rise and Fall Time Overshoot Slew Rate 2nd Harmonic Distortion 3rd Harmonic Distortion Total Harmonic Distortion Input Voltage Noise Input Offset Voltage (1) Average Drift Input Bias Current (1) Average Drift Power Supply Rejection Ratio (1) Open-Loop Gain Supply Current (1) Conditions G = +1, VOUT = 0.02Vpp G = +2, VOUT = 0.2Vpp G = +2, VOUT = 2Vpp G = +11, VOUT = 0.2Vpp VOUT = 1V step; (10% to 90%) VOUT = 1V step 1V step VOUT = 1Vpp, 10kHz VOUT = 1Vpp, 10kHz VOUT = 1Vpp, 10kHz > 10kHz Min Typ 4.9 3.7 1.4 2.2 163 10kHz Min Typ 4.3 3.0 2.3 2.0 110