CLC2057

Data Sheet A m p l i fy t h e H u m a n E x p e r i e n c e ® Comlinear CLC2057 FEATURES n Unity gain stable n 1.75mA supply current per channel n 15MHz gain bandwidth product n 6V/μs slew rate n 110dB PSRR, CMRR, and voltage gain n 4nV/√Hz input voltage noise n 0.0005% THD n 4V to 36V single supply voltage range n Improved replacement for NJM4580 APPLICATIONS n Active Filters n Audio Pre-Amplifiers n Audio AC-3 Decoder Systems n Headphone Amplifier n General purpose dual ampliifer Dual, Low Noise, Operational Amplifier Comlinear CLC2057 Dual, Low Noise, Operational Amplifier General Description The COMLINEAR CLC2057 is a low noise, dual voltage feedback amplifier that is internally frequency compensated to provide unity gain stability. The CLC2057 offers over 13MHz of unity gain bandwidth and excellent (110dB) CMRR, PSRR, and open loop gain. The CLC2057 also features low input voltage noise (4nV/√Hz) and low distortion (0.0005%) making it well suited for audio applications such as audio filtering. Other applications include industrial measurement tools, pre-amplifiers, and other circuits that require wellmatched channels. The COMLINEAR CLC2057 is designed to operate over a wide power supply voltage range, ±2V to ±18V (4V to 36V). It utilizes an industry standard dual amplifier pin-out and is available in a Pb-free, RoHS compliant SOIC-8 package. Typical Application - Filtering and Driving Audio in STB or DVD Applications 5pF 10µF + 150µF + Audio_Input L DAC Load Resistor 1kΩ 1.8kΩ 39kΩ 620Ω Audio_Output L 470pF 680pF 2 +VS 8 – 1/2 CLC2057 10kΩ 1 Rev 1A 3 + 4 100Ω AUDIO AMPLIFIER Amp RV 5pF Audio_Input R 1kΩ 10µF 1.8kΩ 39kΩ 150µF 620Ω Audio_Output R 470pF +VS DAC Load Resistor 10kΩ 6 680pF 10kΩ 100µF + 0.1µF Amp RV 10kΩ 0.1µF 100Ω – 1/2 CLC2057 + 7 5 + 100µF Ordering Information Part Number CLC2057ISO8X Package SOIC-8 Pb-Free Yes RoHS Compliant Yes Operating Temperature Range -40°C to +85°C Packaging Method Reel Moisture sensitivity level for all parts is MSL-1. ©2007-2009 CADEKA Microcircuits LLC www.cadeka.com Data Sheet CLC2057 Pin Configuration CLC2057 Pin Description Pin No. 1 Pin Name OUT1 -IN1 +IN1 -VS +IN2 -IN2 OUT2 +VS Description Output, channel 1 Negative input, channel 1 Positive input, channel 1 OUT1 -IN1 +IN1 -V S 1 2 3 4 8 7 6 5 +VS OUT2 -IN2 +IN2 2 3 4 5 6 7 8 Comlinear CLC2057 Dual, Low Noise, Operational Amplifier Negative supply Positive input, channel 2 Negative input, channel 2 Output, channel 2 Positive supply Rev 1A ©2007-2009 CADEKA Microcircuits LLC www.cadeka.com 2 Data Sheet Absolute Maximum Ratings The safety of the device is not guaranteed when it is operated above the “Absolute Maximum Ratings”. The device should not be operated at these “absolute” limits. Adhere to the “Recommended Operating Conditions” for proper device function. The information contained in the Electrical Characteristics tables and Typical Performance plots reflect the operating conditions noted on the tables and plots. Comlinear CLC2057 Dual, Low Noise, Operational Amplifier Parameter Supply Voltage Differential Input Voltage Input Voltage Power Dissipation (TA = 25°C) - SOIC-8 Min 0 Max 40 (±20) 60 (±30) 30 (±15) 500 Unit V V V mW Reliability Information Parameter Junction Temperature Storage Temperature Range Lead Temperature (Soldering, 10s) Package Thermal Resistance SOIC-8 Notes: Package thermal resistance (qJA), JDEC standard, multi-layer test boards, still air. Min -65 Typ Max 150 150 260 Unit °C °C °C °C/W 100 Recommended Operating Conditions Parameter Operating Temperature Range Supply Voltage Range Min -40 4 (±2) Typ Max +85 36 (±18) Unit °C V Rev 1A ©2007-2009 CADEKA Microcircuits LLC www.cadeka.com 3 Data Sheet Electrical Characteristics TA = 25°C, +Vs = +15V, -Vs = -15V, Rf = Rg =2kΩ, RL = 2kΩ to VS/2, G = 2; unless otherwise noted. Symbol Parameter Conditions G = +1, VOUT = 0.2Vpp, VS = 5V, Rf = 0 G = +1, VOUT = 0.2Vpp, VS = 30V, Rf = 0 G = +2, VOUT = 0.2Vpp, VS = 5V G = +1, VOUT = 0.2Vpp, VS = 30V G = +2, VOUT = 1Vpp, VS = 5V G = +2, VOUT = 2Vpp, VS = 30V Min Typ 11.5 13.5 6.2 6.7 2.7 1.6 15 Max Units MHz Frequency Domain Response UGBWSS BWSS BWLS GBWP Unity Gain Bandwidth -3dB Bandwidth Large Signal Bandwidth Gain-Bandwidth Product VOUT = 0.2V step; (10% to 90%), VS = 5V VOUT = 0.2V step; (10% to 90%), VS = 30V VOUT = 0.2V step VOUT = 2V step 2V step, VS = 5V 4V step, VS = 30V VOUT = 5V, f = 1kHz, G = 20dB > 1kHz RIAA, 30kHz LPF, RS = 50Ω Channel-to-channel, 500kHz, VS = 5V to 30V RS ≤ 10kΩ VCM = 0V VCM = 0V RS ≤ 10kΩ RL = ≥2kΩ, VOUT = ±10V Total, RL = ∞ +VS = 15V, -VS = -15V DC, VCM = 0V to +VS - 1.5V, RS ≤ 10kΩ ±12 80 80 90 Comlinear CLC2057 Dual, Low Noise, Operational Amplifier MHz MHz MHz MHz MHz MHz ns ns % % V/µs V/µs % nV/√Hz μVRMS dB 3 500 100 mV nA nA dB dB 7 mA V dB Time Domain Response tR, tF OS SR Rise and Fall Time Overshoot Slew Rate 50 48 16 5 6 6 0.0005 4 0.7 67 0.5 150 10 110 110 3.5 ±13.5 110 Distortion/Noise Response THD en XTALK VIO Ib IOS PSRR AOL IS CMIR CMRR Total Harmonic Distortion Input Voltage Noise Crosstalk Input Offset Voltage (1) Input Bias Current (1) (1) DC Performance Input Offset Current Open-Loop Gain Supply Current (1) Power Supply Rejection Ratio (1) (1) Input Characteristics Common Mode Input Range (1) Common Mode Rejection Ratio (1) Rev 1A Output Characteristics RL = 2kΩ VOUT Output Voltage Swing RL = 10kΩ ISOURCE ISINK Notes: 1. 100% tested at 25°C at VS = ±15V. +13.8, -13.0 ±14.0, -13.3 45 80 V V mA mA Output Current, Sourcing Output Current, Sinking VIN+ = 1V, VIN- = 0V, VOUT = 2V VIN+ = 0V, VIN- = 1V, VOUT = 2V ©2007-2009 CADEKA Microcircuits LLC www.cadeka.com 4 Data Sheet Typical Performance Characteristics TA = 25°C, +Vs = +15V, -Vs = -15V, Rf = Rg =2kΩ, RL = 2kΩ to VS/2, G = 2; unless otherwise noted. Non-Inverting Frequency Response 3 2 1 0 -1 G = 10 -2 -3 -4 -5 0.1 1 10 VOUT = 0.2Vpp -20 0.1 1 10 G=2 0 Inverting Frequency Response 5 G = -1 Comlinear CLC2057 Dual, Low Noise, Operational Amplifier Normalized Gain (dB) Normalized Gain (dB) G=1 Rf = 0 G=5 G = -2 G = -5 G = -10 -5 -10 -15 VOUT = 0.2Vpp Frequency (MHz) Frequency (MHz) Large Signal Frequency Response 5 -3dB Bandwidth vs. VOUT 8 7 VOUT = 2Vpp -5 -3dB Bandwidth (MHz) Normalized Gain (dB) 0 VOUT = 1Vpp 6 5 4 3 2 1 -10 -15 0.1 1 10 0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 Frequency (MHz) VOUT (VPP) Small Signal Pulse Response 0.15 0.1 Large Signal Pulse Response 3 2 Rev 1A Output Voltage (V) 0.05 0 -0.05 -0.1 -0.15 0 2 4 6 8 10 Output Voltage (V) 1 0 -1 -2 -3 0 2 4 6 8 10 Time (us) Time (us) ©2007-2009 CADEKA Microcircuits LLC www.cadeka.com 5 Data Sheet Typical Performance Characteristics TA = 25°C, +Vs = +5V, -Vs = GND, Rf = Rg =2kΩ, RL = 2kΩ to VS/2, G = 2; unless otherwise noted. Non-Inverting Frequency Response 5 4 3 G=2 0 Inverting Frequency Response 5 G = -1 G = -2 G = -5 -5 G = -10 Comlinear CLC2057 Dual, Low Noise, Operational Amplifier Normalized Gain (dB) 2 1 0 -1 -2 -3 -4 -5 0.1 1 VOUT = 0.2Vpp G=5 G = 10 Normalized Gain (dB) G=1 Rf = 0 -10 -15 VOUT = 0.2Vpp -20 10 0.1 1 10 Frequency (MHz) Frequency (MHz) Large Signal Frequency Response 5 VOUT = 1Vpp VOUT = 2Vpp -3dB Bandwidth vs. VOUT 8 7 -3dB Bandwidth (MHz) Normalized Gain (dB) 0 6 5 4 3 2 1 -5 -10 -15 0.1 1 10 0 0.0 0.5 1.0 1.5 2.0 Frequency (MHz) VOUT (VPP) Small Signal Pulse Response 2.7 Large Signal Pulse Response 4 3.5 Rev 1A 2.6 Output Voltage (V) Output Voltage (V) 0 2 4 6 8 10 3 2.5 2 1.5 2.5 2.4 2.3 1 0 2 4 6 8 10 Time (us) Time (us) ©2007-2009 CADEKA Microcircuits LLC www.cadeka.com 6 Data Sheet Typical Performance Characteristics TA = 25°C, +Vs = +15V, -Vs = -15V, Rf = Rg =2kΩ, RL = 2kΩ to VS/2, G = 2; unless otherwise noted. Open Loop Voltage Gain vs. Frequency 120 110 Input Voltage Noise vs. Frequency 20 Comlinear CLC2057 Dual, Low Noise, Operational Amplifier Input Voltage Noise (nV/√Hz) RL=2K 100 Open Loop Gain (dB) 90 80 70 60 50 40 30 20 10 0.001 0.01 0.1 1 10 100 1000 15 10 5 0 1 10 100 1,000 Frequency (KHz) Frequency (Hz) Maximum Output Voltage Swing vs. Frequency 30 25 20 15 10 5 0 0.1 1 10 100 1000 Maximum Output Voltage Swing vs. RL 30 Maximum Output Voltage Swing (V) 28 26 24 22 20 18 16 14 12 0.1 1 10 Maximum Swing Voltage (V) RL=2K Frequency (KHz) Resistance Load (KΩ) Input Offset Voltage vs. Temperature 2 1.5 Input Bias Current vs. Temperature 200 Rev 1A Input Offset Voltage (mV) 1 0.5 0 -0.5 -1 -40 -20 0 20 40 60 80 100 120 Input Bias Current (nA) 150 100 50 0 -40 -20 0 20 40 60 80 100 120 Temperature (°C) Temperature (°C) ©2007-2009 CADEKA Microcircuits LLC www.cadeka.com 7 Data Sheet Typical Performance Characteristics TA = 25°C, +Vs = +15V, -Vs = -15V, Rf = Rg =2kΩ, RL = 2kΩ to VS/2, G = 2; unless otherwise noted. Supply Voltage vs. Supply Current 2.4 2.3 ICC 2.2 -1.8 -1.9 -2 Crosstalk vs. Frequency -50 -55 -60 Comlinear CLC2057 Dual, Low Noise, Operational Amplifier Crosstalk (dB) ICC (mA) -65 -70 -75 -80 -85 0.1 1.0 IEE (mA) 2.1 2 IEE 1.9 1.8 2 4 6 8 10 12 14 16 18 -2.1 -2.2 -2.3 -2.4 Supply Voltage (+/-V) Frequency (MHz) Functional Block Diagram VCC -Input +Input Output Rev 1A VEE ©2007-2009 CADEKA Microcircuits LLC www.cadeka.com 8 Data Sheet Application Information Basic Operation Figures 1 and 2 illustrate typical circuit configurations for non-inverting, inverting, and unity gain topologies for dual supply applications. They show the recommended bypass capacitor values and overall closed loop gain equations. +Vs 6.8μF Power Dissipation Power dissipation should not be a factor when operating under the stated 2k ohm load condition. However, applications with low impedance, DC coupled loads should be analyzed to ensure that maximum allowed junction temperature is not exceeded. Guidelines listed below can be used to verify that the particular application will not cause the device to operate beyond it’s intended operating range. Maximum power levels are set by the absolute maximum junction rating of 150°C. To calculate the junction temperature, the package thermal resistance value ThetaJA (ӨJA) is used along with the total die power dissipation. TJunction = TAmbient + (ӨJA × PD) Where TAmbient is the temperature of the working environment. In order to determine PD, the power dissipated in the load needs to be subtracted from the total power delivered by the supplies. PD = Psupply - Pload Supply power is calculated by the standard power equation. Output 0.1μF 6.8μF -Vs RL Rf G = - (Rf/Rg) For optimum input offset voltage set R1 = Rf || Rg Comlinear CLC2057 Dual, Low Noise, Operational Amplifier Input + - 0.1μF Output 0.1μF RL Rf G = 1 + (Rf/Rg) Rg -Vs 6.8μF Figure 1. Typical Non-Inverting Gain Circuit +Vs 6.8μF R1 Input Rg + - 0.1μF Psupply = Vsupply × IRMS supply Vsupply = VS+ - VSPower delivered to a purely resistive load is: Pload = ((VLOAD)RMS2)/Rloadeff The effective load resistor (Rloadeff) will need to include the effect of the feedback network. For instance, Rloadeff in figure 3 would be calculated as: Rev 1A Figure 2. Typical Inverting Gain Circuit +Vs 6.8μF RL || (Rf + Rg) These measurements are basic and are relatively easy to perform with standard lab equipment. For design purposes however, prior knowledge of actual signal levels and load impedance is needed to determine the dissipated power. Here, PD can be found from Input + - 0.1μF Output RL 0.1μF 6.8μF -Vs G=1 PD = PQuiescent + PDynamic - PLoad Quiescent power can be derived from the specified IS values along with known supply voltage, VSupply. Load power Figure 3. Unity Gain Circuit ©2007-2009 CADEKA Microcircuits LLC www.cadeka.com 9 Data Sheet can be calculated as above with the desired signal amplitudes using: (VLOAD)RMS = VPEAK / √2 ( ILOAD)RMS = ( VLOAD)RMS / Rloadeff The dynamic power is focused primarily within the output stage driving the load. This value can be calculated as: PDYNAMIC = (VS+ - VLOAD)RMS × ( ILOAD)RMS Assuming the load is referenced in the middle of the power rails or Vsupply/2. Figure 4 shows the maximum safe power dissipation in the package vs. the ambient temperature for the packages available. 2 Overdrive Recovery An overdrive condition is defined as the point when either one of the inputs or the output exceed their specified voltage range. Overdrive recovery is the time needed for the amplifier to return to its normal or linear operating point. The recovery time varies, based on whether the input or output is overdriven and by how much the range is exceeded. The CLC2057 will typically recover in less than 5μs from an overdrive condition. Figure 6 shows the CLC2057 in an overdriven condition. Comlinear CLC2057 Dual, Low Noise, Operational Amplifier 10 VIN = 7.5Vpp G=5 Input 5 20 10 Output Voltage (V) Maximum Power Dissipation (W) Input Voltage (V) 1.5 0 Output 0 1 -5 -10 SOIC-8 -10 0 4 8 12 16 20 -20 0.5 Time (us) 0 -40 -20 0 20 40 60 80 Ambient Temperature (°C) Figure 6. Overdrive Recovery Layout Considerations General layout and supply bypassing play major roles in high frequency performance. CaDeKa has evaluation boards to use as a guide for high frequency layout and as an aid in device testing and characterization. Follow the steps below as a basis for high frequency layout: • Include 6.8µF and 0.1µF ceramic capacitors for power supply decoupling • Place the 6.8µF capacitor within 0.75 inches of the power pin • Place the 0.1µF capacitor within 0.1 inches of the power pin • Remove the ground plane under and around the part, especially near the input and output pins to reduce parasitic capacitance • Minimize all trace lengths to reduce series inductances Refer to the evaluation board layouts below for more information. Figure 4. Maximum Power Derating Driving Capacitive Loads Increased phase delay at the output due to capacitive loading can cause ringing, peaking in the frequency response, and possible unstable behavior. Use a series resistance, RS, between the amplifier and the load to help improve stability and settling performance. Refer to Figure 5. Input + Rf Rg Rs CL RL Rev 1A Output Figure 5. Addition of RS for Driving Capacitive Loads ©2007-2009 CADEKA Microcircuits LLC www.cadeka.com 10 Data Sheet Evaluation Board Information The following evaluation boards are available to aid in the testing and layout of these devices: Evaluation Board # CEB006 CLC2057 Products Comlinear CLC2057 Dual, Low Noise, Operational Amplifier Evaluation Board Schematics Evaluation board schematics and layouts are shown in Figures 7-9. These evaluation boards are built for dual- supply operation. Follow these steps to use the board in a single-supply application: 1. Short -Vs to ground. 2. Use C3 and C4, if the -VS pin of the amplifier is not directly connected to the ground plane. Figure 8. CEB006 Top View Figure 9. CEB006 Bottom View Rev 1A Figure 7. CEB006 Schematic ©2007-2009 CADEKA Microcircuits LLC www.cadeka.com 11 Data Sheet Typical Applications VIN R1 11kΩ C1 0.05µF Boost-Bass-Cut R2 100kΩ R3 11kΩ C2 0.05µF Comlinear CLC2057 Dual, Low Noise, Operational Amplifier R4 11kΩ – C3 0.005µF 1/2 CLC2057 + VOUT R5 3.6kΩ R6 500kΩ R7 3.6kΩ Boost-Treble-Cut Figure 10: Audio Tone Control Circuit 5pF Audio_Input L DAC Load Resistor 1kΩ 10µF + 1.8kΩ 39kΩ 150µF + 620Ω Audio_Output L 470pF 680pF 2 +VS 8 – 1/2 CLC2057 10kΩ 1 3 + 4 100Ω AUDIO AMPLIFIER Amp RV 5pF Audio_Input R 1kΩ 10µF 1.8kΩ 39kΩ 150µF 620Ω Audio_Output R 470pF +VS DAC Load Resistor 10kΩ 6 680pF 10kΩ 100µF + 0.1µF Amp RV 10kΩ 0.1µF 100Ω – 1/2 CLC2057 + 7 5 + 100µF Rev 1A Figure 11: Typical Circuit for Filtering and Driving Audio in STB or DVD Player Applications 3 0 -3 -6 -9 -12 -15 -18 -21 0.1 1 10 100 1000 -100 VOUT = 5Vpp -110 0.1 1 10 100 1000 VOUT = 5Vpp -50 -60 -70 -80 -90 Normalized Gain (dB) Crosstalk (dB) Frequency (kHz) Frequency (kHz) Figure 12: AC Reponse of Figure 10 (VS=10V, RL=630Ω) ©2007-2009 CADEKA Microcircuits LLC Figure 13: Cross-Talk Performance (VS=10V, RL=630Ω) www.cadeka.com 12 Data Sheet Mechanical Dimensions SOIC-8 Package Comlinear CLC2057 Dual, Low Noise, Operational Amplifier Rev 1A For additional information regarding our products, please visit CADEKA at: cadeka.com CADEKA Headquarters Loveland, Colorado T: 970.663.5452 T: 877.663.5452 (toll free) CADEKA, the CADEKA logo design, COMLINEAR, the COMLINEAR logo design, and ARCTIC are trademarks or registered trademarks of CADEKA Microcircuits LLC. All other brand and product names may be trademarks of their respective companies. CADEKA reserves the right to make changes to any products and services herein at any time without notice. CADEKA does not assume any responsibility or liability arising out of the application or use of any product or service described herein, except as expressly agreed to in writing by CADEKA; nor does the purchase, lease, or use of a product or service from CADEKA convey a license under any patent rights, copyrights, trademark rights, or any other of the intellectual property rights of CADEKA or of third parties. Copyright ©2007-2009 by CADEKA Microcircuits LLC. All rights reserved. A m p l i fy t h e H u m a n E x p e r i e n c e