0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
会员中心
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
KH205

KH205

  • 厂商:

    CADEKA

  • 封装:

  • 描述:

    KH205 - Overdrive-Protected Wideband Op Amp - Cadeka Microcircuits LLC.

  • 详情介绍
  • 数据手册
  • 价格&库存
KH205 数据手册
www.cadeka.com KH205 Overdrive-Protected Wideband Op Amp Features s s s s s s s General Description The KH205 is a wideband overdrive-protected operational amplifier designed for applications needing both speed and low power operation. Utilizing a well-established current feedback architecture, the KH205 exhibits performance far beyond that of conventional voltage feedback op amps. For example, the KH205 has a bandwidth of 170MHz at a gain of +20 and settles to 0.1% in 22ns. Plus, the KH205 has a combination of important features not found in other high-speed op amps. For example, the KH205 has been designed to consume little power – 570mW at ±15V supplies. The result is lower power supply requirements and less systemlevel heat dissipation. In addition, the device can be operated on supply voltages as low as ±5V for even lower power dissipation. Complete overdrive protection has been designed into the part. This is critical for applications, such as ATE and instrumentation, which require protection from signal levels high enough to cause saturation of the amplifier. This feature allows the output of the op amp to be protected against short circuits using techniques developed for low-speed op amps. With this capability, even the fastest signal sources can feature effective short circuit protection. The KH205 is constructed using thin film resistor/bipolar transistor technology, and is available in the following versions: 2 -3dB bandwidth of 170MHz 0.1% settling in 22ns Complete overdrive protection Low power: 570mW (190mW at ±5V) 3MΩ input resistance Output may be current limited Direct replacement for CLC205 Applications s s s s s s s Fast, precision A/D conversion Automatic test equipment Input/output amplifiers Photodiode, CCD preamps IF processors High-speed modems, radios Line drivers Large Signal Pulse Response Av = +20 Output Voltage (2V/div) Av = -20 Time (5ns/div) Bottom View Internal Feedback Case ground GND 7 Rf 8 -VCC 9 -VCC 10 KH205AI KH205AK KH205AM -25°C to +85°C -55°C to +125°C -55°C to +125°C Supply Voltage 2000Ω Non-Inverting Input Inverting Input Not Connected V+ 6 Collector Supply Output + V- 5 NC 4 3 2 NC 6 6 - 11 Vo 12 +VCC KH205HXC KH205HXA -55°C to +125°C -55°C to +125°C 12-pin TO-8 can 12-pin TO-8 can, features burn-in & hermetic testing 12-pin TO-8 can, environmentally screened and electrically tested to MIL-STD-883 SMD#: 5962-9083501HXC SMD#: 5962-9083501HXA Collector Supply 1 +VCC Supply Voltage Typical Performance Gain Setting Parameter +7 +20 +50 -1 -20 -50 Units MHz ns V/ns ns -3dB bandwidth 220 170 80 220 130 80 rise time 1.7 2.2 4.7 1.7 2.9 4.7 slew rate 2.4 2.4 2.4 2.4 2.4 2.4 settling time (to 0.1%) 22 22 20 21 20 19 Case and bias ground GND Not Connected Pin 8 provides access to a 2000Ω feedback resistor which can be connected to the output or left open if an external feedback resistor is desired. REV. 1A January 2004 DATA SHEET KH205 KH205 Electrical Characteristics PARAMETERS Ambient Temperature Ambient Temperature FREQUENCY DOMAIN RESPONSE ¦ -3dB bandwidth large-signal bandwidth gain flatness ¦ peaking ¦ peaking ¦ rolloff group delay linear phase deviation TIME DOMAIN RESPONSE rise and fall time settling time to 0.1% to 0.05% overshoot slew rate NOISE AND DISTORTION RESPONSE ¦ 2nd harmonic distortion ¦ 3rd harmonic distortion equivalent input noise voltage inverting current non-inverting current noise floor integrated noise noise floor integrated noise STATIC, DC PERFORMANCE * input offset voltage average temperature coefficient * input bias current average temperature coefficient * input bias current average temperature coefficient * power supply rejection ratio common mode rejection ratio * supply current MISCELLANEOUS PERFORMANCE non-inverting input resistance non-inverting input capacitance output impedance output voltage range internal feedback resistor absolute tolerance temperature coefficient inverting input current self limit KH205AI (Av = +20V, VCC = ±15V, RL = 200Ω, Rf = 2kΩ; unless specified) TYP +25°C +25°C 170 100 0 0 – 3.0 ± .2 0.8 2.2 4.8 22 24 7 2.4 -57 -68 2.1 22 4.8 -157 39 -157 39 3.5 11 3.0 15 2.0 20 69 60 19 3.0 5.0 – ±12 – – 2.2 MIN & MAX RATINGS -55°C -55°C >140 >72
KH205
物料型号: - KH205

器件简介: - KH205是一款过载保护的宽带运算放大器,适用于需要速度和低功耗操作的应用。它采用电流反馈架构,性能远超传统电压反馈运放。例如,KH205在20倍增益时的带宽为170MHz,22ns内稳定至0.1%。此外,KH205还具有其他高速运放中不常见的重要特性,如低功耗(±15V供电时为570mW)和完整的过载保护功能。

引脚分配: - 引脚8提供了一个2000Ω反馈电阻的接入点,可以连接到输出或留空以使用外部反馈电阻。

参数特性: - 带宽:170MHz(20倍增益时) - 上升时间:1.7ns(-3dB带宽) - 压摆率:2.4V/ns - 稳定时间:22ns(0.1%精度) - 功耗:570mW(±15V供电时)

功能详解: - KH205具有独立于交流带宽和电压增益的特性,可以通过反馈电阻调整频率响应,具有高压摆率和快速稳定的特点。此外,KH205还具有过载保护功能,能够在输出饱和时限制反相输入的电流,保护放大器不受损害。

应用信息: - 快速、精密的A/D转换、自动测试设备、输入/输出放大器、光电二极管、CCD前置放大器、中频处理器、高速调制解调器、无线设备、线路驱动器等。

封装信息: - KH205AI:-25°C至+85°C,12引脚TO-8封装 - KH205AK:-55°C至+125°C,12引脚TO-8封装,具有老化测试和密封测试 - KH205AM:-55°C至+125°C,12引脚TO-8封装,经过环境筛选和MIL-STD-883电气测试 - KH205HXC:-55°C至+125°C,SMD封装,型号5962-9083501HXC - KH205HXA:-55°C至+125°C,SMD封装,型号5962-9083501HXA
KH205 价格&库存

很抱歉,暂时无法提供与“KH205”相匹配的价格&库存,您可以联系我们找货

免费人工找货