ECS-245.7-20-5PVX

CSM-7SSX LOW PROFILE SMD CRYSTAL The CSM-7SSX is an excellent choice for a low cost SMD Crystal. The CSM-7SSX (5PVX) has a case height of 2.6 mm Max. in a resistance weld metal package. Request a Sample OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS CSM-7SSX SMD CRYSTAL PARAMETERS CONDITIONS CSM-7SSX MIN Frequency 50.000 MHz @ +25°C ± 30 ppm Standard -10 ~ +70°C ± 50 ppm Shunt Capacitance Co 5 pF Load Capacitance Specify in P/N Series pF 500 μW Frequency Stability* Drive Level Cost Effective 2.6 mm Height Industry Standard Footprint Pb Free/RoHS Compliant 10 20 DL Operating Temperature* Topr -10 +70 °C Storage Temperature Tstg -55 +125 °C ±5 ppm Aging (First Year) DIMENSIONS (mm) MAX 3.57 Frequency Tolerance* • • • • TYP UNITS @ +25°C ±3°C Frequency (MHz) 3.57 ~ 4.999 5.000 ~ 5.999 6.000 ~ 6.999 7.000 ~ 8.999 9.000 ~ 12.999 13.000 ~ 19.999 20.000 ~ 30.000 26.000 ~ 39.999 40.000 ~ 50.000 Figure 1) Top, Side, Bottom, and End Crystal is symmetrical, pin 1 & 2 are interchangeable. ESR Ω Max. 150 120 100 80 60 50 40 100 80 Mode of Osc. Fundamental Fundamental Fundamental Fundamental Fundamental Fundamental Fundamental 3rd Overtone 3rd Overtone Figure 2) Suggested land pattern PART NUMBERING GUIDE: Example ECS-200-20-5PVX-TR ECS - FREQUENCY ABBREVIATION ECS 200 = 20.000 MHz See P/N Guide LOAD CAPACITANCE 20 = 20 pF 10 = 10 pF S = Series * Specify available options in P/N. † Contact ECS for availability over extended temp range. PACKAGE AVAILABLE OPTIONS Tolerance 5PVX = 2.6 mm Blank = Std A = ± 25 ppm J = ± 20 ppm R = ± 15 ppm C = ± 10 ppm Stability Blank= Std D= ±100 ppm E = ± 50 ppm G = ± 30 ppm H = ± 25 ppm T = ± 20 ppm † W = ±15 ppm † K = ± 10 ppm † PACKAGING Temp Range Blank= Std L = -10 ~ +70°C M = -20 ~ +70°C Y = -30 ~ +85°C N = -40 ~ +85°C P = -40 ~ +105°C S = -40 ~ +125°C U = -55 ~ +125°C TR = Tape & Reel 1K/Reel Rev.2017 15351 West 109th Street | Lenexa, KS 66219 | Phone: 913.782.7787 | Fax: 913.782.6991 | www.ecsxtal.com CSM-7SSX LOW PROFILE SMD CRYSTAL POCKET TAPE DIMENSIONS (mm) SOLDER PROFILE Peak solder Temp +260°C Max 10 sec Max. 2 Cycles Max. MSL 1, Lead Finish Sn/Cu Matte Figure 1) Suggested Reflow Profile 15351 West 109th Street | Lenexa, KS 66219 | Phone: 913.782.7787 | Fax: 913.782.6991 | www.ecsxtal.com