ECS-260-9-36TC-CZY-TR

APPROVAL SHEET Product Name： Quartz Thermistor Crystal P/N.： ECS-260-9-36TC-CZY-TR Customer’s Name： Specification Sheet#： Date： 12/30/2020 Draw： A. Anderson Check： D. Kelly Customer Confirmation： ECS Inc. International TEL: 913-782-7787 FAX: 913-782-6991 http: www.ecsxtal.com ECS Inc. International ■ REVISION HISTORY NO. DATE EDITION DRAW 1 12/30/2020 First Edition A. Anderson 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 15351 W. 109th Street, Lenexa, Kansas 66219 ECS Inc. International 1. SCOPE This specification relates to the Quartz Crystal to be supplied by ECS Inc. International. 2. SPECIFICATION 2-1. ELECTRICAL SPECIFICATION Parameter Value Nominal Frequency 26.000000 MHz Mode of Vibration AT-cut fundamental Operating Temperature Range -30 ~ +85°C Storage Temperature Rangel -40 ~ +105°C Drive level 10uW Typ., 100uW Max. Loading Capacitance 9 pF Test Set 250B PI-Network Initial Frequency Tolerance ±10 ppm Max. TA= +25°C Tolerance Over Temperature ±12 ppm Max. TA= -30 ~ +85°C Aging ±0.7ppm Max. 1st year Equivalent Series Resistance 50Ω Max. Spurious Mode Resistance 500Ω Min. Insulation resistance 500 MΩ Min Coefficient range (referenced to 32°C) Note1 C1: -0.35 ~ -0.10ppm/°C C2: -12.0*10-4 ~ -5.0*10-4ppm/°C C3: 8.7*10-5 ~ 11.0*10-5ppm/°C Thermistor Resistance(25°C) 100 Kohms ±1％ TA= +25°C Thermistor B-constant (25~50°C) 4250 K ±1％ TA= +25 ~ +50°C 15351 W. 109th Street, Lenexa, Kansas 66219 Condition ±1MHz ECS Inc. International Note1 The FT curve of an AT-cut crystal can be modeled as a third -order polynomial. C0, C1, C2, and C3 are coefficients that need to be defined are calculated in the order specified. C0, C1, C2, and C3 are coefficients that need to be defined. C1: First-order Curve Fitting Parameter C2: Second-order Curve Fitting Parameter C3: Third-order Curve Fitting Parameter/T0=+30.5°C 15351 W. 109th Street, Lenexa, Kansas 66219 ECS Inc. International 2-2. RELIABILITY TEST CONDITIONS NO ITEM Temperature:85℃ HIGH TEMPERATURE Times: 1000 hours 1 STORAGE The test was conducted 24 ±2 hours at the end of the test (no charge) Temperature: 85℃±2℃; Humidity: 85%; Time: 1000 CONSTANT The test was conducted 24 ±2 hours at the end of the 2 HUMIDITY test BASIS OF VERDICT △FL≤±10 ppm △RS≤5 Ω or ±20% (Whichever is Larger) △FL≤±10 ppm △RS≤5 Ω or ±20% (Whichever is Larger) Temperature：-40℃ △FL≤±10 ppm LOW △RS≤5 Ω or ±20% Time：1000 hours TEMPERATURE 3 (Whichever is Larger) STORAGE The test was conducted 24 ±2 hours at the end of the test 5 min TEMPERATURE -55℃±2℃ (5 min)←→125℃±2℃ (5 min); For 1000 Maximum conversion time：5 min CYCLING 4 High/Low temperature holding time：30 min △FL≤±10 ppm △RS≤5 Ω or ±20% (Whichever is Larger) DROP Height: 1m; 3 times △FL≤±10 ppm △RS≤5 Ω or ±20% (Whichever is Larger) MECHANICAL SHOCK Peak: 100g's Duration: 6ms Waveform: Half-sine Velocity Change: 12.3 ft / sec Direction: +X, -X, +Y, -Y, +Z, -Z 3 times/direction Conduct electrical performance tests Frequency: 10~2000Hz: Acceleration: 5g/s Direction: X, Y, Z Duration: 20min/direction. Times: 12次 △FL≤±10 ppm △RS≤5 Ω or ±20% (Whichever is Larger) 5 6 VIBRATION 7 △FL≤±10 ppm △RS≤5 Ω or ±20% (Whichever is Larger) △FL≤±10 ppm △RS≤5 Ω or ±20% (Whichever is Larger) WELDING HEAT RESISTANT 8 9 SOLDER TERMINAL 10 STRENGTH TP:260℃ Max TsMax：200℃ TsMin：150℃ CYCLE TIME: 2次 Pretreatment before test:155℃ high-temperature store Solder Coverage ≥ 95% 4 hours Temperature: 260℃±5℃，immersion 1.8kg,of the tangential No Rupture Observed 30min thrust (60 s) 1.8kg of the perpendicular tension (60 s) 15351 W. 109th Street, Lenexa, Kansas 66219 ECS Inc. International 3. Appearance 3.1 Outline Dimensions and Recommended Land Pattern EC26.0 ●CZY 3.2 Marking Information EC26.0 ●CZY ITEM ① ② ③ ④ Marking EC 26.0 CZY ⚫ REMARK ECS Inc. International 26.000 MHz Spec (±10/12 ppm -30 ~ +85°C) 1＃PIN 15351 W. 109th Street, Lenexa, Kansas 66219 ECS Inc. International 4. TAPE AND REEL PACKING 4-1. TAPING SPECIFICATION (1) Tape Dimensions Material of Carrier Tape: Black conductive PS (2) Reel Dimensions Material of the Reel: PS 15351 W. 109th Street, Lenexa, Kansas 66219 ECS Inc. International (3)Taping Method 15351 W. 109th Street, Lenexa, Kansas 66219 ECS Inc. International 3-2. Warehouse Condition （1）Temperature: -10 ~ +40°C （2）Humidity: 45% ~ 75% 15351 W. 109th Street, Lenexa, Kansas 66219