ECS-MPI4040R1-R22-R

Effective April 2017 ECS-MPI4040 High Current, High Frequency, Miniature Power Inductors Automotive Applications: • Driver assistance • Information • Entertainment • Lighting Applications: • Handheld/mobile devices • Portable media players • GPS/PDAs • Battery operated devices • Notebook/netbook • Tablets/smartbooks • LCD Displays • LED Drivers • POL Converters Product description: • AEC-Q200 Qualified, Grade 1 • Handles high transient inrush current spikes • Environmental data: • Storage temperature range (component): -55°C to +165°C Magnetically shielded • Operating temperature range: -55°C to +125°C • Frequency range 20kHz to 10MHz • • Inductance range from 0.09µH to 22µH Solder reflow temperature: J-STD-020D compliant • Current range from 1.1A to 32.0A • 4.7 x 4.31 footprint surface mount package in 1.2, 1.5, 1.85 or 2.0mm heights • Rugged construction • Halogen free, lead free, RoHS compliant HALOGEN HF ECS INC. INTERNATIONAL 15351 West 109th Street, Lenexa KS 66219 ∙913-782-7787 www.ecsxtal.com Technical Data 1704 ECS-MPI4040 Series High Current, High Frequency Miniature Power Inductors Effective May 2021 Product specifications Part Number 5 OCL1 ± 20% (µH) Part Marking Designator Irms2 (Amps) Isat3 @ 25°C (Amps) R1 -- 1.2mm Height DCR (mΩ) ± 20% @ 20°C K-factor4 ECS-MPI4040R1-R10-R 0.09 R10 8.00 32.0† 8.50 1401 ECS-MPI4040R1-R15-R 0.15 R15 7.00 26.0 † 11.0 989 ECS-MPI4040R1-R22-R 0.23 R22 5.50 21.0 18.0 814 ECS-MPI4040R1-R33-R 0.33 R33 4.40 17.0 28.0 659 ECS-MPI4040R1-R47-R 0.47 R47 5.20 11.5 20.0 1295 ECS-MPI4040R1-R68-R 0.68 R68 3.30 9.00 51.0 461 ECS-MPI4040R1-1R0-R 1.0 1R0 3.70 7.70 40.0 990 ECS-MPI4040R1-1R5-R 1.5 1R5 3.00 6.50 60.0 732 ECS-MPI4040R1-2R2-R 2.2 2R2 2.60 5.90 80.0 623 ECS-MPI4040R1-3R3-R 3.3 3R3 2.20 5.10 115 481 ECS-MPI4040R1-4R7-R 4.7 4R7 1.80 3.80 180 411 ECS-MPI4040R1-6R8-R 6.8†† 6R8 1.50 3.20 250 344 ECS-MPI4040R1-100-R 10†† 100 1.20 2.80 370 276 R2 -- 1.5mm Height ECS-MPI4040R2-R47-R 0.47 R47 6.40 12.2 13.0 1403 ECS-MPI4040R2-1R0-R 1.0 1R0 4.60 8.90 25.0 935 ECS-MPI4040R2-1R5-R 1.5 1R5 3.80 7.60 37.0 701 ECS-MPI4040R2-2R2-R 2.2 2R2 3.20 5.70 58.0 647 ECS-MPI4040R2-3R3-R 3.3 3R3 2.60 5.40 76.0 495 ECS-MPI4040R2-4R7-R 4.7 4R7 2.20 4.30 105 421 ECS-MPI4040R2-6R8-R 6.8 3.40 158 351 10.0†† 6R8 6R 100 1.80 ECS-MPI4040R2-100-R 1.50 3.10 240 271 1 Open Circuit Inductance (OCL) Test Parameters: 100kHz, 0.10Vrms, 0.0Adc 2 Irms : DC current for an approximate temperature rise of 40°C without core loss. De-rating is necessary for AC currents. Temperature rise is dependent upon several factors, including the PCB pad layout, trace thickness and width, air-flow and proximity to other heat generating components. It is recommended the part temperature not exceed 125°C under worst case operating conditions and therefore, the temperature rise should be verified in the end use application. Irms testing was performed on a 19.05mm long x 6.35mm wide x 0.070mm thick copper trace in still air. 3 Isat: Peak current for approximately 30% rolloff at +25°C. 4 K-factor: Used to determine Bp-p for core loss (see graph). p-p B = K * L * DI. Bp-p : (Gauss), K: (K-factor from table), L: (inductance in µH), DI (peak-to-peak ripple current in amps). 5 Part Number Definition: ECS-MPI4040RX-XXX-R • ECS-MPI4040X = product code and size • XXX = inductance value in all, “R” = decimal point - If no “R” is present, then third digit equals the number of zeros • “-R” suffix = RoHS compliant † Transient pulse not to exceed 1 millisecond. †† Maximum operating frequency less than 10MHz, consult factory for application specific values. ECS INC. INTERNATIONAL 15351 West 109th Street, Lenexa KS 66219 ∙913-782-7787 www.ecsxtal.com Technical Data 1704 ECS-MPI4040 Series High Current, High Frequency Miniature Power Inductors Part Number 5 OCL1 ± 20% (µH) Part Marking Designator Effective May 2021 Irms2 (Amps) Isat3 @ 25°C (Amps) DCR (mΩ) ± 20% @ 20°C K-factor4 R3 -- 1.85mm Height ECS-MPI4040R3-R22-R 0.22 R22 8.00 20.0 5.8 1870 ECS-MPI4040R3-R47-R 0.47 R47 5.80 17.0 10.3 1530 ECS-MPI4040R3-1R0-R 1.0 1R0 4.00 9.40 32.0 732 ECS-MPI4040R3-1R5-R 1.5 1R5 3.80 8.20 36.0 673 ECS-MPI4040R3-2R2-R 2.2 2R2 3.40 7.90 48.0 543 ECS-MPI4040R3-3R3-R 3.3 3R3 3.00 6.60 60.0 432 ECS-MPI4040R3-4R7-R 4.7 4R7 2.30 4.80 92.0 374 ECS-MPI4040R3-6R8-R 6.8 6R8 2.00 4.50 120 306 ECS-MPI4040R3-100-R 10.0 100 1.50 3.80 213 251 ECS-MPI4040R3-150-R 15.0 150 1.30 3.00 285 213 ECS-MPI4040R3-220-R 22.0†† 220 1.10 2.20 408 174 R4 -- 2.0mm Height ECS-MPI4040R4-R22-R 0.22 R22 10.1 15.0 5.3 2405 ECS-MPI4040R4-R33-R 0.33 R33 9.50 12.8 6.0 1870 ECS-MPI4040R4-R47-R 0.45 R47 8.10 11.5 8.2 1530 ECS-MPI4040R4-1R0-R 1.0 1R0 5.70 8.20 17.0 990 ECS-MPI4040R4-1R5-R 1.5 1R5 4.90 6.90 23.0 802 ECS-MPI4040R4-2R2-R 2.2 2R2 3.90 5.70 35.0 673 ECS-MPI4040R4-3R3-R 3.3†† 3R3 3.30 4.50 49.0 510 ECS-MPI4040R4-4R7-R 4.7†† 4R7 2.90 3.90 67.0 455 ECS-MPI4040R4-6R8-R 6.8†† 6R8 2.40 3.20 91.0 374 ECS-MPI4040R4-100-R 10.0†† 100 1.90 2.60 148 306 ECS-MPI4040R4-220-R 22.0†† 220 1.30 1.80 316 203 1 Open Circuit Inductance (OCL) Test Parameters: 100kHz, 0.10Vrms, 0.0Adc 2 Irms : DC current for an approximate temperature rise of 40°C without core loss. De-rating is necessary for AC currents. Temperature rise is dependent upon several factors, including the PCB pad layout, trace thickness and width, air-flow and proximity to other heat generating components. It is recommended the part temperature not exceed 125°C under worst case operating conditions and therefore, the temperature rise should be verified in the end use application. Irms testing was performed on a 19.05mm long x 6.35mm wide x 0.070mm thick copper trace in still air. 3 Isat: Peak current for approximately 30% rolloff at +25°C. 4 K-factor: Used to determine Bp-p for core loss (see graph). p-p B = K * L * DI. Bp-p : (Gauss), K: (K-factor from table), L: (inductance in µH), DI (peak-to-peak ripple current in amps). 5 Part Number Definition: ECS-MPI4040RX-XXX-R • ECS-MPI4040X = product code and size • XXX = inductance value in all, “R” = decimal point - If no “R” is present, then third digit equals the number of zeros • “-R” suffix = RoHS compliant † Transient pulse not to exceed 1 millisecond. †† Maximum operating frequency less than 10MHz, consult factory for application specific values. ECS INC. INTERNATIONAL 15351 West 109th Street, Lenexa KS 66219 ∙913-782-7787 www.ecsxtal.com Technical Data 1704 ECS-MPI4040 Series High Current, High Frequency Miniature Power Inductors Effective May 2021 Dimensions – mm Part # A Max. ECS-MPI4040R1-xxx-R 1.2 ECS-MPI4040R2-xxx-R 1.5 ECS-MPI4040R3-xxx-R 1.85 ECS-MPI4040R4-xxx-R 2.0 Soldering Surface to be coplanar within 0.1018 mm PCM tolerance ±0.1 mm unless otherwise specified Packaging information - mm 1.5 dia 1.5 dia. 4.0 A 2.0 1.75 1 5.5 3R3 12.0 ±0.30 . 4.8 2 Supplied in tape and reel packaging: • ECS-MPI4040R1 = 5500 parts per 13” Ø reel • ECS-MPI4040R2 = 4500 parts per 13” Ø reel • ECS-MPI4040R3 = 3500 parts per 13” Ø reel • ECS-MPI4040R4 = 3000 parts per 13” Ø reel ECS-MPI4040R1=1.30 ECS-MPI4040R2=1.60 ECS-MPI4040R3=1.95 ECS-MPI4040R4=2.1 A 8.0 SECTION A-A 4.45 User Direction of feed Temperature rise vs. total loss 70 Temperature Rise (°C) 60 R2 R3 R1 , R4 50 40 30 20 10 0 0 0 .1 0.2 0 .3 0.4 0 .5 0.6 0 .7 0.8 0 .9 Total Loss (W) th ECS INC. INTERNATIONAL 15351 West 109 Street, Lenexa KS 66219 ∙913-782-7787 www.ecsxtal.com ECS-MPI4040 Series High Current, High Frequency Miniature Power Inductors Technical Data 1704 Effective May 2021 Core loss ECS INC. INTERNATIONAL 15351 West 109th Street, Lenexa KS 66219 ∙913-782-7787 www.ecsxtal.com Technical Data 1704 Effective May 2021 ECS-MPI4040 Series High Current, High Frequency Miniature Power Inductors 1.2mm Height R1 inductance characteristics — % of OCL vs. IDC 1.5mm Height R2 inductance characteristics — % of OCL vs. IDC ECS INC. INTERNATIONAL 15351 West 109th Street, Lenexa KS 66219 ∙913-782-7787 www.ecsxtal.com ECS-MPI4040 Series High Current, High Frequency Miniature Power Inductors Technical Data 1704 Effective April 2017 1.85mm Height R3 inductance characteristics — % of OCL vs. IDC 2.0mm Height R4 inductance characteristics — % of OCL vs. IDC ECS INC. INTERNATIONAL 15351 West 109th Street, Lenexa KS 66219 ∙913-782-7787 www.ecsxtal.com Technical Data 1704 ECS-MPI4040 Series High Current, High Frequency Miniature Power Inductors Effective April 2017 Solder reflow profile Reference JDEC J-STD-020D Profile Feature Preheat and Soak • Temperature min. (Tsmin) • Temperature max. (Tsmax) • Time (Tsmin to Tsmax) (ts) Average ramp up rate Tsmax to Tp Liquidous temperature (TL) Time at liquidous (tL) Peak package body temperature (TP)* Time (tp)** within 5 °C of the specified classification temperature (Tc) Average ramp-down rate (Tp to Tsmax) Time 25°C to Peak Temperature Standard SnPb Solder 100°C Lead (Pb) Free Solder 150°C 150°C 200°C 60-120 Seconds 60-120 Seconds 3°C/ Second Max. 3°C/ Second Max. 183°C 60-150 Seconds 217°C 60-150 Seconds Table 1 Table 2 20 Seconds** 30 Seconds** 6°C/ Second Max. 6°C/ Second Max. 6 Minutes Max. 8 Minutes Max. * Tolerance for peak profile temperature (Tp) is defined as a supplier minimum and a user maximum. ** Tolerance for time at peak profile temperature (tp) is defined as a supplier minimum and a user maximum. ECS INC. INTERNATIONAL 15351 West 109th Street, Lenexa KS 66219 ∙913-782-7787 www.ecsxtal.com