ECX-L32CM-212.500

ECSpressCONTM ECS-L2 (2.5V) and ECS-L3 (3.3V) low jitter, low current Frequency Configurable SMD crystal controlled oscillators. ECX-L LVDS Oscillator Request a Sample OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS Parameters Conditions Frequency Range Operating Temperature Storage Temperature Supply Voltage Frequency Stability * Input Current Output Symmetry Output Load Output Enable Output Disable Disable Current Output Enable Time Output Disable Time Differential Output Voltage Offset Voltage Rise and Fall Times Aging Start-up Time Absolute Voltage Range Moisture Sensitivity Level Termination Finish ESD Sensitivity Standard Extended (N Option) VDD Option A Option B Option C Option D 10.0 ~ 100.0 MHz 100.1 ~ 250.0 MHz 250.1 ~ 500 MHz 500.1 ~ 1500.0 MHz @ 50% VDD level Load between each Output Pin 1 ** Pin 1 ECS-L2 (+2.5V) MIN TYP MAX 10.000 1500.0 0 +70 -40 +85 -55 +125 +2.375 +2.5 +2.625 ±100 ±50 ±25 ±20 16 18 21 26 45/55 ECS-L3 (+3.3V) MIN TYP MAX 10.000 1500.0 0 +70 -40 +85 -55 +125 +3.135 +3.3 +3.465 ±100 ±50 ±25 ±20 18 20 22 28 45/55 100 0.7% 0.3% 0.3% 16 10% VDD to 90% Level @ +25°C (first year) @ +25°C (first year) 16 200 50 175 150 350 1.25 350 MHz °C °C °C VDC ppm ppm ppm ppm mA mA mA mA % Ω 100 0.7% Pin 1 = VIL Units 200 50 175 500 ±2 10 +3.63 150 350 1.25 350 500 ±2 10 +3.63 Vdd Vdd mA ns ns mV V pS PPM ms VDC 1 Au 3kV Max. Human Body Model *Note: Inclusive of 25⁰C tolerance, operating temperature, input voltage change, load change, shock and vibration. **Note: Internal pull-up resistor active output if pin 1 is left open. Part Numbering Guide: Example ECX-L35BN-156.250 Series ECX-L (LVDS Output) Voltage 2 = +2.5V 3 = +3.3V Package Size (mm) 2 = 2.5 x 2 3 = 3.2 x 2.5 5 = 5 x 3.25 7=7x5 Stability A = ± 100 ppm B = ± 50 ppm C = ± 25 ppm D = ± 20 ppm Operating Temperature L= M= N= P= -10 ~ +70°C -20 ~ +70°C -40 ~ +85°C -40 ~ +105°C Frequency Customer Specified 15351 West 109th Street | Lenexa, KS 66219 | Phone: 913.782.7787 | Fax: 913.782.6991 | www.ecsxtal.com ECSpressCONTM ECX-L LVDS Oscillator Phase Noise and Jitter Data (typical) Frequency (offset) SSB 10 Hz Phase 100 Hz Noise 1 KHz Data 10 KHz (dBc/Hz typical) 100 KHz 1 MHz 5 MHz Phase Jitter pS 12 KHz ~ 20 MHz, RMS 77.760 122.880 125.000 156.250 212.5 491.520 622.080 1000 1250 -64 -84 -118 -128 -137 -145 -152 -62 -93 -105 -113 -115 -135 -143 -61 -86 -100 -105 -105 -126 -137 -52 -82 -93 -97 -97 -116 -127 -42 -81 -93 -96 -97 -119 -129 1.5 1.1 0.9 -68 -99 -113 -119 -120 -140 -142 0.8 -63 -94 -113 -118 -119 -137 -146 -55 -85 -109 -116 -118 -139 -146 1.1 0.9 1.0 1.1 -48 -85 -101 -102 -103 -124 -133 1.2 Phase Noise Plot of ECX-L35BN-77.760 (typical) Package Data Item Description Lid Metal Base Ceramic Plating Gold/Nickel Surface/Under 15351 West 109th Street | Lenexa, KS 66219 | Phone: 913.782.7787 | Fax: 913.782.6991 | www.ecsxtal.com ECSpressCONTM ECX-L LVDS Oscillator Dimensions (mm) Figure 1) Top, Side, Bottom & Land Figure 2) Top, Side, Bottom & Land Figure 3) Top, Side, Bottom & Land Figure 4) Top, Side, Bottom & Land Suggested Reflow Profile Pin Connections Pin # Function 1 2 3 4 5 6 O/E or No Connect No Connect Ground Differential Output Complementary Output Supply Voltage 15351 West 109th Street | Lenexa, KS 66219 | Phone: 913.782.7787 | Fax: 913.782.6991 | www.ecsxtal.com