ETXO-L33CL-12.500

ECSpressCONTM ETXO-L2 (2.5V) and ETXO-L3 (3.3V) low jitter, low current SMD Temperature Compensated Crystal Oscillators (TCXO). ETXO-L LVDS TCXO Request a Sample OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS Parameters Conditions MIN 10.000 -30 -40 -55 +2.375 Frequency Range Standard (L Option) Extended (N Option) Operating Temperature Storage Temperature Supply Voltage Frequency Stability * Initial Calibration Tolerance Current with output disabled VDD Option A Option B * @+25°C ±2°C 10.0 ~ 156.0 MHz 156.1 ~ 600.0 MHz 600.1 ~ 800.0 MHz 800.1 ~ 1500.0 MHz @ 50% VCC level Differential Pin 1 ** Pin 1 ** Input Current Duty Cycle Output Load Output Enable Output Disable Disable Current Output Enable Time Output Disable Time “0” Level “1” Level Rise and Fall Times Aging Start-up Time Phase Jitter, rms Absolute Voltage Range Moisture Sensitivity Level Termination Finish ESD Sensitivity ETXO-L2 (+2.5V) TYP MAX 1500.00 +85 +85 +125 +2.5 +2.625 ±2.5 ±1.0 ±1.0 18 22 28 30 34 45/55 MIN 10.000 -30 -40 -55 +3.135 0.7% ETXO-L3 (+3.3V) TYP MAX 1500.00 +85 +85 +125 +3.3 +3.465 ±2.5 ±1.0 ±1.0 18 25 30 32 36 45/55 0.7% 0.3% 0.3% 18 18 200 50 Pin 1 = VIL VOL VOH 10% VDD to 90% level @ +25°C (first year) 0.9 1.1 1.4 200 12 KHz to 20 MHz band 200 50 0.9 1.6 400 ±1 5 1.1 1.4 200 1.0 1.6 400 ±1 5 1.0 +3.63 +3.63 1 Au 3 kV Max. Human Body Model *Note: Consult ECS for availability **Note: Internal pull-up resistor active output if pin 2 is left open. Part Number Guide: Example ETXO-P33CL-156.250 Series Voltage Package Size (mm) ETXO-L (LVDS Output) 2 = +2.5V 3 = +3.3V 3 = 3.2 x 2.5 Stability B = ± 1.0 ppm* C = ± 2.5 ppm Operating Temperature L = -30 ~ +85°C M = -20 ~ +70°C N = -40 ~ +85°C - - Frequency Customer Specified 15351 West 109th Street | Lenexa, KS 66219 | Phone: 913.782.7787 | Fax: 913.782.6991 | www.ecsxtal.com Units MHz °C °C °C VDC ppm ppm ppm mA mA mA mA mA % Vdd Vdd mA ns ns V V pS ppm ms pS VDC ECSpressCONTM ETXO-L LVDS TCXO ase Phase Noise and Jitter Data (typical) Frequency (offset) SSB 10 Hz Phase 100 Hz Noise 1 KHz Data 10 KHz (dBc/Hz typical) 100 KHz 1 MHz 5 MHz Phase Jitter pS 12 KHz ~ 20 MHz, RMS 77.760 122.880 125.00 156.250 212.5 -64 -84 -118 -128 -137 -145 -152 -62 -93 -105 -113 -115 -135 -143 0.9 -68 -99 -113 -119 -120 -140 -142 0.8 -63 -94 -113 -118 -119 -137 -146 1.1 -63 -91 -109 -115 -116 -138 -147 1.0 1.0 ase Phase Noise Plot of ETXO-L33CL-156.250 (typical) Package Data Item Description Lid Metal Base Ceramic Plating Gold/Nickel Surface/Under 15351 West 109th Street | Lenexa, KS 66219 | Phone: 913.782.7787 | Fax: 913.782.6991 | www.ecsxtal.com ECSpressCONTM ETXO-L LVDS TCXO Dimensions (mm) Pin Connections Pin # Function 1 2 3 4 5 6 No Connect Output Enable Ground Differential Output Complementary Output Supply Voltage Figure 1) Top, Side, Bottom & Land 15351 West 109th Street | Lenexa, KS 66219 | Phone: 913.782.7787 | Fax: 913.782.6991 | www.ecsxtal.com